This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Messages - Nate
Pages: 1 ... 60 61 [62] 63 64 ... 112
3051
« on: July 26, 2017, 08:29:51 PM »
Continued the search for a 4 door truck for our expanding family. Almost pulled the trigger on a half ton GMC with the 5.3 but am really struggling with the thought of not having a HD truck available to me. Yesterday I had 1,800lbs of hardwood flooring in the back of my LB7. I couldn't have done that in a 1500.
Sent from my iPhone using Tapatalk
I sold my LMM February and got into a F150. I am currently looking for a 2500 with a 6.0. Drove one Monday and have 3 of them I plan to check out tonight. Mostly I don't like the Ford but there have been a few occasions now where a 2500 would have been nice. I test drove a 2015 1500 Silverado last night also. If none of these 2500 work out I will probably start looking at a 2014+. I need the crew cab but also want the 6.5' bed. Found out last night that GM has stop sale on the 2014s. They were all pulled off the lots. Should be back out in a few weeks I was told.
Don't hold your breath too long on the "stop sales" I've been waiting for 3 weeks + to get some units fixed from my inventory and my GM store says "no fix, no parts, no end in sight" they usually reserve parts for customers first then do our inventory. But I can tell you GM is infamous for taking forever for a fix- see Airbag recalls 2007-2010 Silverado/Tahoe/suburban.....still no fix. recalls been out for a year.
Matt, i sent you a pm
3052
« on: July 25, 2017, 04:16:32 PM »
That is an interesting lift, is that portable or solidly secured to the ground?
3053
« on: July 23, 2017, 11:07:35 PM »
Thats epic TRN..........HAHAHAHAHA
3054
« on: July 23, 2017, 08:25:40 PM »
Or you could go with 5w30 full synthetic
3055
« on: July 21, 2017, 09:39:32 AM »
do you all know which singer this was geared towards?
3056
« on: July 20, 2017, 11:47:35 PM »
ol' smoke here will give it his darndest....
3057
« on: July 20, 2017, 11:10:59 PM »
I truly laughed at this.
3058
« on: July 20, 2017, 11:01:25 PM »
we may need some sort of evidence to back this claim up.....................
3059
« on: July 20, 2017, 10:57:31 PM »
here yah go mike. https://youtu.be/2fQARZdRd-YThanks Nate! This short video shows how little it kicks and was right after we got the gas block functioning properly; hence the look for ejected brass.
3060
« on: July 20, 2017, 09:46:39 PM »
3061
« on: July 20, 2017, 08:21:59 PM »
WOW bob, didn't see that one coming............
where is shawn with his 4x4 expertise......
3062
« on: July 20, 2017, 08:20:21 PM »
so just a recommendation for yah mike, and others if they want it.....
in future sight adjustments. say your doing groups of three (it makes it easier to keep track of on the target) after every three rounds, triangulate (with a sharpie)your three shots and place a 1, 2, 3, 4, etc to correspond with which shot group it was. you should not make any adjustments until you have had at least 3 shot groups (9 rounds). by doing this, you will be able to get a better understanding of what your gun/sight is doing as well as if you are following the 4 basic fundamentals of marksmanship (steady position, aiming, breath control and trigger squeeze).
3063
« on: July 20, 2017, 08:11:57 PM »
just remember don.............that's a bad mamma jamma Hershey bar if your still twitchin when you think about that day......lol
3064
« on: July 20, 2017, 12:18:55 PM »
hey now, lets keep dons plant eatin discussion over on his thread and the recipe proof pics over here........
3065
« on: July 19, 2017, 02:22:59 PM »
3066
« on: July 16, 2017, 11:29:32 PM »
Had a couple this weekend Bob. Just figured it was time to get fired again! ..and Nate, I used to have one in El Paso, until he got to be a stuck up ! ;P
Sent from my Pixel using Tapatalk
I couldnt deal with that area any longer, but then again i went from one shart show to another once i got up here.....
3067
« on: July 16, 2017, 07:50:57 PM »
Wait.......!
Ken has friends???????
3068
« on: July 16, 2017, 01:18:06 PM »
Fixed it for yah trn......lol
3069
« on: July 16, 2017, 01:02:06 AM »
He was my neighbor when i was stationed up here, and has helped me out immensely this last year.
3070
« on: July 15, 2017, 09:11:27 PM »
Total time 13 hrs, total ride time just under 1145
3071
« on: July 15, 2017, 07:15:34 PM »
3072
« on: July 15, 2017, 06:11:33 PM »
TRN,
This would be right up your alley, 200 mile ride.
3073
« on: July 15, 2017, 06:10:27 PM »
Jon, at least its a cheap fix.
3074
« on: July 15, 2017, 06:09:32 PM »
Now im currently sitting in the shade here (downtown portland, or. @ 1500, so basically 11hrs later) Waiting for him to arrive. He said he is about 30-35 miles out.
3075
« on: July 15, 2017, 06:05:26 PM »
Then met him at 1020 at the half way point (100 miles down the road).
Guess ill have to right the pic when i get home.
3077
« on: July 13, 2017, 09:48:25 PM »
3078
« on: July 13, 2017, 09:45:59 PM »
brisket and coleslaw............
3079
« on: July 12, 2017, 09:37:36 PM »
3080
« on: July 11, 2017, 12:20:18 PM »
I think there is a guy on here that likes to destroy tractors, so if he tries to sell you one of his used ones...........run! HAHAHAHAHA
3081
« on: July 10, 2017, 01:28:08 PM »
Just thinking out loud here.......
Maybe heavier duty tires....
Maybe an extra helper spring or 2........
3500 i believe has a long bed option.........
Maybe different gearing.........
Maybe different programing on the different control modules. .......
3082
« on: July 10, 2017, 12:38:32 AM »
I think it does.
Do you have meatheads book? He specifically talks about reverse sear in there.
3083
« on: July 09, 2017, 11:18:28 PM »
3084
« on: July 09, 2017, 11:01:18 PM »
reverse seared new York strips with onions and mushrooms and a side of au gratin taters...........
3085
« on: July 08, 2017, 04:32:46 PM »
Longball, you have to fix your post, your photo from photobucket is not working because of their new policy of you have to pay to play......
3086
« on: July 07, 2017, 08:01:43 PM »
Ruben pizza
3087
« on: July 07, 2017, 11:48:48 AM »
Over the years, I have gravitated to building everything with screws. They provide so much more clamping force for operations such as gluing these panels to the structure. Really, the glue does all the holding, but the screws provide for a good clamp/bond, then always a great backup to just hold by themselves.
But I think I'll nail the trusses to the top band with ring shanked stainless 3" nails with my pneumatic nailer.
Off to Tractor Supply Company (I'm their biggest buyer :-) to pick up a new gate. That old 10 or 12 footer is not cutting the mustard. (Why would anyone want to cut mustard anyway??) I'm opting for two new treated posts, some black stain, and a brandly new 16' heavy equipment friendly gate.
did you bump your head this morning don?.......this is like saying "military intelligence" is smart..........
3088
« on: July 07, 2017, 10:15:06 AM »
Oh no, they are sittin in a safe place.......
3089
« on: July 06, 2017, 01:36:42 PM »
Oh i still have those, just havent got the titanium band for one of the 2 yet.
I have no issue with the analog face, just prefer digital for quick glances......
3090
« on: July 05, 2017, 11:02:31 PM »
Looks really good.
I just hope they do their job when I nail them up in place
Just remember that your 2 outside ones dont get the additional pieces of wood, use the metal pieces in their places.
3091
« on: July 05, 2017, 10:44:55 PM »
Looks really good.
3093
« on: July 05, 2017, 06:46:12 PM »
I looked at the best popcorn chix one and I am now slobbering all over myself even though I have beef plate ribs in the oven.........
3095
« on: July 05, 2017, 04:40:08 PM »
well I got skunked all weekend!
never even got out on the ocean, cause the water just couldn't lay down enough for a 26 footer deep V hull alumaweld boat.
and I only caught 1 rainbow on the lake that was thrown back because no body else caught anything and I was not going to waste time and effort on 1 rainbow.
3096
« on: July 03, 2017, 01:22:10 PM »
3097
« on: July 02, 2017, 10:45:09 AM »
The foot didnt make me flip, he had his merc 250 wide open and litteraly cut it as hard as he could and sent me flying like a trebuchet shot.
I probably wont fry the rainbow, to greasy, will see if i can find a recipe for maybe smoking it........
3098
« on: July 02, 2017, 10:00:22 AM »
And this was taken about a second or 2 after the previous pic. It was my buddys mission to sling shot me off the tube so that all of the grandkids would stop being scared of the water and laugh.
3099
« on: July 02, 2017, 09:56:48 AM »
Well yesterday, jr and i passed with in a few miles of each other as 1 was entering salem,or. And the other was leaving.
Then in the afternoon this is what i spent doing.
And today will hopefully be rainbow trout fishing and monday hopefully halibut.
3100
« on: July 01, 2017, 09:18:25 AM »
oh I'm with you on that.
Pages: 1 ... 60 61 [62] 63 64 ... 112
|