Hello Guest

Poll

Does the chrome skull on the tractor throttle "Hillbilly - up the Tac-Trac?

No way, it's kool
2 (25%)
The prefrontal lobe contour is easier on your hand than the sharp metal edge that was there
0 (0%)
Possibly a bit hillbillish, but who cares
5 (62.5%)
Negative comments about Don't modifications gets one banned
1 (12.5%)

Total Members Voted: 8

Author Topic: "Tac Trac" a Tractor modified to do many things!  (Read 24892 times)

0 Members and 1 Guest are viewing this topic.

Offline Flyin6

  • Administrator
  • *****
  • Posts: 19994
    • View Profile
Re: "Tac Trac" a Tractor modified to do many things!
« Reply #100 on: June 20, 2016, 09:02:52 PM »
Today, we will finish up the mount for the shovel and tool box.

Here's the upper shovel mount. It is really just a catchment. THe shovel secures below at the blade, but slides into this first

Site owner    IS 6:8  Psalm 91 
NSDQ      Author: Distant Thunder

Offline Flyin6

  • Administrator
  • *****
  • Posts: 19994
    • View Profile
Re: "Tac Trac" a Tractor modified to do many things!
« Reply #101 on: June 20, 2016, 09:03:46 PM »
The lower mount is like the ones you have seem me use before
Site owner    IS 6:8  Psalm 91 
NSDQ      Author: Distant Thunder

Offline Flyin6

  • Administrator
  • *****
  • Posts: 19994
    • View Profile
Re: "Tac Trac" a Tractor modified to do many things!
« Reply #102 on: June 20, 2016, 09:04:52 PM »
The tool box was finish welded, then ground somewhat, then primed with the acid etch stuff
Site owner    IS 6:8  Psalm 91 
NSDQ      Author: Distant Thunder

Offline Flyin6

  • Administrator
  • *****
  • Posts: 19994
    • View Profile
Re: "Tac Trac" a Tractor modified to do many things!
« Reply #103 on: June 20, 2016, 09:05:39 PM »
Then painted completely
Site owner    IS 6:8  Psalm 91 
NSDQ      Author: Distant Thunder

Offline Flyin6

  • Administrator
  • *****
  • Posts: 19994
    • View Profile
Re: "Tac Trac" a Tractor modified to do many things!
« Reply #104 on: June 20, 2016, 09:06:14 PM »
The rest of the lower mount was fitted...
Site owner    IS 6:8  Psalm 91 
NSDQ      Author: Distant Thunder

Offline Flyin6

  • Administrator
  • *****
  • Posts: 19994
    • View Profile
Re: "Tac Trac" a Tractor modified to do many things!
« Reply #105 on: June 20, 2016, 09:08:04 PM »
And the rest of the business was then bolted up and the shovel and jack slid home. I did line the jack and upper shovel mount with the rubber liner with adhesive backing, so that it wouldn't disturb the mud daubers and spiders while I was mowing sequoias.
Site owner    IS 6:8  Psalm 91 
NSDQ      Author: Distant Thunder

Offline Flyin6

  • Administrator
  • *****
  • Posts: 19994
    • View Profile
Re: "Tac Trac" a Tractor modified to do many things!
« Reply #106 on: June 20, 2016, 09:11:39 PM »
Got just a tid bit of safety sam in me I guess. I imagined mowing in overspeed mode and that little single engine quadraped with big teeth decidin' to attack that buzzin' slight out of plane drive shaft, and suddenly finding himself about seventeen feet long and in doing High-"G" astro-dog training!
Site owner    IS 6:8  Psalm 91 
NSDQ      Author: Distant Thunder

Offline Flyin6

  • Administrator
  • *****
  • Posts: 19994
    • View Profile
Re: "Tac Trac" a Tractor modified to do many things!
« Reply #107 on: June 20, 2016, 09:13:04 PM »
^^^ That will either work, or it won't

The thing is getting near completion, except for the cutter mod which I should start tomorrow
Site owner    IS 6:8  Psalm 91 
NSDQ      Author: Distant Thunder

Offline moto123

  • Registered
  • **
  • Posts: 316
    • View Profile
Re: "Tac Trac" a Tractor modified to do many things!
« Reply #108 on: June 20, 2016, 10:38:54 PM »
Took a while for me to catch up with this.  It's looking great.  But is it my eyes or did the new paint not quite match the OEM paint color?  Was the Val spar stuff guaranteed to match or did you just pick the closest Green?  It still looks really good, just curious for when I might be ordering paint.

Offline Flyin6

  • Administrator
  • *****
  • Posts: 19994
    • View Profile
Re: "Tac Trac" a Tractor modified to do many things!
« Reply #109 on: June 20, 2016, 10:52:02 PM »
Took a while for me to catch up with this.  It's looking great.  But is it my eyes or did the new paint not quite match the OEM paint color?  Was the Val spar stuff guaranteed to match or did you just pick the closest Green?  It still looks really good, just curious for when I might be ordering paint.
Bought a quart at the J Deere store.

Wait until I buff the highly scratched and somewhat scratched factory stuff...
Site owner    IS 6:8  Psalm 91 
NSDQ      Author: Distant Thunder

Offline moto123

  • Registered
  • **
  • Posts: 316
    • View Profile
Re: "Tac Trac" a Tractor modified to do many things!
« Reply #110 on: June 20, 2016, 10:53:05 PM »
OK so maybe the factory paint is just faded a little and ad you said scratched up.

Offline Flyin6

  • Administrator
  • *****
  • Posts: 19994
    • View Profile
Re: "Tac Trac" a Tractor modified to do many things!
« Reply #111 on: June 20, 2016, 11:03:10 PM »
OK so maybe the factory paint is just faded a little and ad you said scratched up.
It seems to have darkened. But a buffer will cut that faded stuff right off and get to some fresher stuff me thinks...Not that it matters!
Site owner    IS 6:8  Psalm 91 
NSDQ      Author: Distant Thunder

Offline BobbyB

  • Global Moderator
  • ****
  • Posts: 2481
    • View Profile
Re: "Tac Trac" a Tractor modified to do many things!
« Reply #112 on: June 21, 2016, 03:15:46 AM »
I'm almost surprised you haven't camo krylon'd it yet.
So, Bobby...being the calculating trained warrior NCO that you are.  Take the appropriate action, Execute!

Offline cudakidd53

  • Global Moderator
  • ****
  • Posts: 2859
    • View Profile
Re: "Tac Trac" a Tractor modified to do many things!
« Reply #113 on: June 21, 2016, 07:57:34 AM »
I'm almost surprised you haven't camo krylon'd it yet.

If he does that Bobby, he won't be able to find it when the grass grows up or when a part flys off!
2012 Silverado LTZ - Duramax
Christian since 1975 - Field Trial Brittanys - NRA Lifetime Member

"When you're dead, you don't know you're dead. Hence, dealing with this fact is not difficult. It is only hard for those still living around you.....It's the same when you're stupid."

Offline Flyin6

  • Administrator
  • *****
  • Posts: 19994
    • View Profile
Re: "Tac Trac" a Tractor modified to do many things!
« Reply #114 on: June 21, 2016, 08:27:45 AM »
I'm almost surprised you haven't camo krylon'd it yet.
Woman intervened!

Had the paint all selected and laid out when the woman discovered me. Like I was a kid caught in the cookie jar! She said,"Don't go and hillbilly out that tractor."
Site owner    IS 6:8  Psalm 91 
NSDQ      Author: Distant Thunder

Offline moto123

  • Registered
  • **
  • Posts: 316
    • View Profile
Re: "Tac Trac" a Tractor modified to do many things!
« Reply #115 on: June 21, 2016, 09:17:05 AM »
Too funny

Offline cudakidd53

  • Global Moderator
  • ****
  • Posts: 2859
    • View Profile
Re: "Tac Trac" a Tractor modified to do many things!
« Reply #116 on: June 21, 2016, 09:53:52 AM »
I'm almost surprised you haven't camo krylon'd it yet.
Woman intervened!

Had the paint all selected and laid out when the woman discovered me. Like I was a kid caught in the cookie jar! She said,"Don't go and hillbilly out that tractor."

I can't stop chuckling about the visual of that!  You all slump shouldered kicking the air and mumbling while putting the necessary equipment back on the shelf.  As Nate would say, "all boo-boo lipped"........I feel your pain- we've all been there!  ;D
2012 Silverado LTZ - Duramax
Christian since 1975 - Field Trial Brittanys - NRA Lifetime Member

"When you're dead, you don't know you're dead. Hence, dealing with this fact is not difficult. It is only hard for those still living around you.....It's the same when you're stupid."

Offline Flyin6

  • Administrator
  • *****
  • Posts: 19994
    • View Profile
Re: "Tac Trac" a Tractor modified to do many things!
« Reply #117 on: June 21, 2016, 10:53:28 PM »
I tackled the Bush hog today

I started with this, a bent up several year old J-Deere MX-6 heavy duty hog which has seen a hard life so far
Site owner    IS 6:8  Psalm 91 
NSDQ      Author: Distant Thunder

Offline Flyin6

  • Administrator
  • *****
  • Posts: 19994
    • View Profile
Re: "Tac Trac" a Tractor modified to do many things!
« Reply #118 on: June 21, 2016, 10:54:17 PM »
First I removed the aft ricochet curtain. We will not be reusing that Mr. Phelps
Site owner    IS 6:8  Psalm 91 
NSDQ      Author: Distant Thunder

Offline Flyin6

  • Administrator
  • *****
  • Posts: 19994
    • View Profile
Re: "Tac Trac" a Tractor modified to do many things!
« Reply #119 on: June 21, 2016, 10:55:22 PM »
Then I made the first of several cuts, cutting away the rear shroud and opening it up to possibilities
Site owner    IS 6:8  Psalm 91 
NSDQ      Author: Distant Thunder

Offline Flyin6

  • Administrator
  • *****
  • Posts: 19994
    • View Profile
Re: "Tac Trac" a Tractor modified to do many things!
« Reply #120 on: June 21, 2016, 10:56:19 PM »
Then I started plating and reinforcing it with 1/4" plate steel
Site owner    IS 6:8  Psalm 91 
NSDQ      Author: Distant Thunder

Offline Flyin6

  • Administrator
  • *****
  • Posts: 19994
    • View Profile
Re: "Tac Trac" a Tractor modified to do many things!
« Reply #121 on: June 21, 2016, 10:58:23 PM »
Then I cut out a "Hook" to keep the pesky saplings from escaping. You'll notice the steel is thick and getting thicker
Site owner    IS 6:8  Psalm 91 
NSDQ      Author: Distant Thunder

Offline Flyin6

  • Administrator
  • *****
  • Posts: 19994
    • View Profile
Re: "Tac Trac" a Tractor modified to do many things!
« Reply #122 on: June 21, 2016, 10:59:11 PM »
Those were welded in
Site owner    IS 6:8  Psalm 91 
NSDQ      Author: Distant Thunder

Offline Flyin6

  • Administrator
  • *****
  • Posts: 19994
    • View Profile
Re: "Tac Trac" a Tractor modified to do many things!
« Reply #123 on: June 21, 2016, 11:01:10 PM »
Next I marked off and cut out a "Hooked" area. This is where all the business is going to take place. THe saplings should get shoved over into this recess where they will be exposed to kni___e
Site owner    IS 6:8  Psalm 91 
NSDQ      Author: Distant Thunder

Offline Flyin6

  • Administrator
  • *****
  • Posts: 19994
    • View Profile
Re: "Tac Trac" a Tractor modified to do many things!
« Reply #124 on: June 21, 2016, 11:04:20 PM »
Then I cut out two uprights from 1/4" plate and the pusher bars from .250 wall 3" square tubing.

The idea here is that the tree is first bent away from the cutter at a slight angle before the slightly stressed trunk is exposed to the blades. This should make for a wee bit easier cutting and make for easide cutting as things will be pushed to fall just aft of that hungry mouth.
Site owner    IS 6:8  Psalm 91 
NSDQ      Author: Distant Thunder

Offline Flyin6

  • Administrator
  • *****
  • Posts: 19994
    • View Profile
Re: "Tac Trac" a Tractor modified to do many things!
« Reply #125 on: June 21, 2016, 11:05:13 PM »
I did the other side the same way, then connected the two halves with a center guard
Site owner    IS 6:8  Psalm 91 
NSDQ      Author: Distant Thunder

Offline Flyin6

  • Administrator
  • *****
  • Posts: 19994
    • View Profile
Re: "Tac Trac" a Tractor modified to do many things!
« Reply #126 on: June 21, 2016, 11:06:47 PM »
Then I welded up everything and moved it outside for cleaning
Site owner    IS 6:8  Psalm 91 
NSDQ      Author: Distant Thunder

Offline Flyin6

  • Administrator
  • *****
  • Posts: 19994
    • View Profile
Re: "Tac Trac" a Tractor modified to do many things!
« Reply #127 on: June 21, 2016, 11:10:25 PM »
I pressure washed all the grit off as well as those stupid decals. The decals took the longest!

Here is a view of the blades. I'd say about 1.75" is exposed along a part of the rear. Mind you, this will not be ideal, but it should be a ton more effective a cutter that it has been with all that bent up thin wall junk hanging on for dear life back there
Site owner    IS 6:8  Psalm 91 
NSDQ      Author: Distant Thunder

Offline Flyin6

  • Administrator
  • *****
  • Posts: 19994
    • View Profile
Re: "Tac Trac" a Tractor modified to do many things!
« Reply #128 on: June 21, 2016, 11:12:03 PM »
With the scrubbin' complete, next is the sandin' wipin' and ah paintin'

Hopefully it will turn out like the bucket. If all goes according to plan I might have it snatching the life out of hundreds of saplings by the week end
Site owner    IS 6:8  Psalm 91 
NSDQ      Author: Distant Thunder

Offline KensAuto

  • Moderator
  • ***
  • Posts: 4603
  • Just call me Bounty.... always absorbing abuse
    • View Profile
Re: "Tac Trac" a Tractor modified to do many things!
« Reply #129 on: June 21, 2016, 11:51:55 PM »
Oh boyyy, The Implement of death!!!!
Underpaid and misunderstood since 2014

Offline JR

  • Global Moderator
  • ****
  • Posts: 6481
    • View Profile
Re: "Tac Trac" a Tractor modified to do many things!
« Reply #130 on: June 22, 2016, 12:13:29 AM »
Dang, you are going to need a dual wheel setup to handle the "Mad Max" mod!!
Retired LEO  Lifetime NRA+  Outcast in Calif

"The tree of liberty must be refreshed from time to time with the blood of patriots and tyrants"

Thomas Jefferson

Offline Sammconn

  • A Guy in the Sticks
  • Registered
  • **
  • Posts: 2556
    • View Profile
Re: "Tac Trac" a Tractor modified to do many things!
« Reply #131 on: June 22, 2016, 12:30:37 AM »
"But what about the safety chain guard!"
Says some liberal who isn't a Darwinism fan...

That will sure wreak havoc on something!
Hopefully the blades are up to the task they now face.
I'd hazard this may be a tiny bit out of the scope of the engineers vision for this brush hog. I'm thinking it will be way mo-better at mowing down the saplings now.
I just don't want to wind up missing a digit or limb.  I can sometimes get in a hurry to get results.
Sam

Offline moto123

  • Registered
  • **
  • Posts: 316
    • View Profile
Re: "Tac Trac" a Tractor modified to do many things!
« Reply #132 on: June 22, 2016, 12:49:44 AM »
Perhaps you have voided the warranty?  :) 

Just don't mow over that chainsaw again with it pointed at your truck...

Offline cudakidd53

  • Global Moderator
  • ****
  • Posts: 2859
    • View Profile
Re: "Tac Trac" a Tractor modified to do many things!
« Reply #133 on: June 22, 2016, 08:08:26 AM »
Makes it easier to sharpen those blades now!  It will toss more "debris" out of the back now so watch your six as you feel it out and remember that those modifications don't up the diameter of what it'll handle! 
2012 Silverado LTZ - Duramax
Christian since 1975 - Field Trial Brittanys - NRA Lifetime Member

"When you're dead, you don't know you're dead. Hence, dealing with this fact is not difficult. It is only hard for those still living around you.....It's the same when you're stupid."

Offline Flyin6

  • Administrator
  • *****
  • Posts: 19994
    • View Profile
Re: "Tac Trac" a Tractor modified to do many things!
« Reply #134 on: June 22, 2016, 08:13:38 AM »
You Menses are funnie!

The chain saw has been mowed over several more times. Mikey saw the cylinder/broken piston (dis)assembly. It no longer poses a significant restriction to mowing!

The blades are up to anything. They look to be 3/4" - 1" thick and are made of high strength hardened steel in a forge.

See, here's the thing. This cutter was factory rated at cutting up to 3" saplings (trees??). Obviously you can't mow a standing thicket of three in. trees, however if you encounter one every once in awhile, sa-live'

The problem has always been in the engagement technique. If one drives over said 3" tree, then enroute to the cutter the flattened tree under a buncha upward pressure takes hydraulic lines, clips, pins and your ham and cheese sandwich every once in awhile. If I back over said tree, then the chain holder thig-ah-ma-jig gets bent up and rolled under. That now turns your cutter into a part time box scraper as well (A good thing???)

By opening up your mouth it is like having a stadium of Sanders supporters listening the the Bernie. His mouth is much more effective!

The pusher bars should just start to push the trees backward before death and a new height arrives on the scene. That's all. Well and if that coon comes out of the hole in the tree and dashes under the bush hog before I can get my nine out, he'll have easier access ;-)))

Bottom line: It was fun modding the thing, I got a better (deadlier) cutter, and you boneheads got entertained!

Summary: Its all good!
Site owner    IS 6:8  Psalm 91 
NSDQ      Author: Distant Thunder

Offline Flyin6

  • Administrator
  • *****
  • Posts: 19994
    • View Profile
Re: "Tac Trac" a Tractor modified to do many things!
« Reply #135 on: June 22, 2016, 08:17:42 AM »
Makes it easier to sharpen those blades now!  It will toss more "debris" out of the back now so watch your six as you feel it out and remember that those modifications don't up the diameter of what it'll handle! 
Copy that Mike!

I think that how this is going to play out, is that this thing will handle the mo-bigger cutting operations. Like the edge of the fields where roses, briars, and stuff like that is keeping me from getting at the bases of the cedars. I'll open that all up with this cutter. Then I think I'm gonna end up owning a flair mower to mow over those golf course lookin' fields of mine. I'll use "Big Bite" as I have named it to cut the swath of "Ephesians trail", then the flail to keep the poison ivy mowed to a comfortable height.
Site owner    IS 6:8  Psalm 91 
NSDQ      Author: Distant Thunder

Offline Bear9350

  • Registered
  • **
  • Posts: 609
    • View Profile
Re: "Tac Trac" a Tractor modified to do many things!
« Reply #136 on: June 22, 2016, 08:19:42 AM »
Perhaps you have voided the warranty?  :) 

Just don't mow over that chainsaw again with it pointed at your truck...

The tip speed of those blades are relatively low compared to your standard lawn mower but I would still pay attention to which direction you are pointing when mowing.

Offline Flyin6

  • Administrator
  • *****
  • Posts: 19994
    • View Profile
Re: "Tac Trac" a Tractor modified to do many things!
« Reply #137 on: June 22, 2016, 08:37:40 AM »
Perhaps you have voided the warranty?  :) 

Just don't mow over that chainsaw again with it pointed at your truck...


The tip speed of those blades are relatively low compared to your standard lawn mower but I would still pay attention to which direction you are pointing when mowing.
Copy that!

Got it!

Open/mowing end toward liberals!
Site owner    IS 6:8  Psalm 91 
NSDQ      Author: Distant Thunder

Offline Flyin6

  • Administrator
  • *****
  • Posts: 19994
    • View Profile
Re: "Tac Trac" a Tractor modified to do many things!
« Reply #138 on: June 22, 2016, 08:19:20 PM »
OK, except for painting the appropriate Danger markings on the big mouth, I'm done with that

So I was thinking about what to put back there to indicate the danger
 
Here's my ideas:

1. That "V" warning on navee jet fighters that says "Jet Intake"
2. A sign written in haji script saying, "Isis fighters, Martyr yourselves here"
   ^^^ That's my fav so far!
3. "Insert republican ballots here"  That way i could lease the machine to the polling centers which are run by democrats
4. Paint a mouth with teeth like the Flying Tiger P-40's had flying against the Japs in China...Oh yes, world, the US Army saved that country also!
5. A sign, "Entrance, Hillary rally"
6. Something like "Darwin award interviews inside"
or
7. "If you recently visited all 57 states, then hold onto the metallic lever inside and pull up on yellow switch to see what prize you won!"

So obviously I have some things to think about...

I had some holes to fill in prior to sanding, like this one:
Site owner    IS 6:8  Psalm 91 
NSDQ      Author: Distant Thunder

Offline Flyin6

  • Administrator
  • *****
  • Posts: 19994
    • View Profile
Re: "Tac Trac" a Tractor modified to do many things!
« Reply #139 on: June 22, 2016, 08:20:18 PM »
And trim down some pointed metal parts
Site owner    IS 6:8  Psalm 91 
NSDQ      Author: Distant Thunder

Offline Flyin6

  • Administrator
  • *****
  • Posts: 19994
    • View Profile
Re: "Tac Trac" a Tractor modified to do many things!
« Reply #140 on: June 22, 2016, 08:21:59 PM »
That's done except for grinding...And I put an edge back on the blades. Funny how those limestone bolders dulls those things!
Site owner    IS 6:8  Psalm 91 
NSDQ      Author: Distant Thunder

Offline Flyin6

  • Administrator
  • *****
  • Posts: 19994
    • View Profile
Re: "Tac Trac" a Tractor modified to do many things!
« Reply #141 on: June 22, 2016, 08:23:01 PM »
Then I started the sanding which took quite a long time!
Site owner    IS 6:8  Psalm 91 
NSDQ      Author: Distant Thunder

Offline Flyin6

  • Administrator
  • *****
  • Posts: 19994
    • View Profile
Re: "Tac Trac" a Tractor modified to do many things!
« Reply #142 on: June 22, 2016, 08:25:24 PM »
For the life of me, I couldn't knock that exit wound in flat. I pounded in on until I centrifuged all my blood into my fingertips. If I would have pulled a hang nail, I'd have likely bled to death!

So I got it close, put a scab on the inside and welded 'er shut!

Hmmm, no pic of 'er welded shut...according to Shawn, it must not have happened!
Site owner    IS 6:8  Psalm 91 
NSDQ      Author: Distant Thunder

Offline Flyin6

  • Administrator
  • *****
  • Posts: 19994
    • View Profile
Re: "Tac Trac" a Tractor modified to do many things!
« Reply #143 on: June 22, 2016, 08:26:49 PM »
All sanded, first with #80, then again with #120

and washed with laqueur thinner
Site owner    IS 6:8  Psalm 91 
NSDQ      Author: Distant Thunder

Offline Flyin6

  • Administrator
  • *****
  • Posts: 19994
    • View Profile
Re: "Tac Trac" a Tractor modified to do many things!
« Reply #144 on: June 22, 2016, 08:27:46 PM »
Next up, acid etching primer stuff. I rattle canned it!
Site owner    IS 6:8  Psalm 91 
NSDQ      Author: Distant Thunder

Offline Flyin6

  • Administrator
  • *****
  • Posts: 19994
    • View Profile
Re: "Tac Trac" a Tractor modified to do many things!
« Reply #145 on: June 22, 2016, 08:31:07 PM »
The paint I used this time is some stuff that TSC sells. It was cheap, like half as much as that liquid gold stuff that Deere sells.

I found a local herion dealer. I told him I needed 1 kilo of pure John Deere paint. He said he thought he could get it, but it was going to cost me...$10,000!

But hey, I'm an Armee pilot so I figured it must be a steal! Get it...a steal???

Anyway, he got busted and the deal fell through, so I had to go for something else. Duane had a single good idea today and buying this stuff was it. Good goin' Buddy!
Site owner    IS 6:8  Psalm 91 
NSDQ      Author: Distant Thunder

Offline Flyin6

  • Administrator
  • *****
  • Posts: 19994
    • View Profile
Re: "Tac Trac" a Tractor modified to do many things!
« Reply #146 on: June 22, 2016, 08:32:42 PM »
And here's how it laid on that cutter/killer/dismemberment device:
Site owner    IS 6:8  Psalm 91 
NSDQ      Author: Distant Thunder

Offline Flyin6

  • Administrator
  • *****
  • Posts: 19994
    • View Profile
Re: "Tac Trac" a Tractor modified to do many things!
« Reply #147 on: June 22, 2016, 08:33:53 PM »
And that cat is in the bag.

Time to load this contraption back up and get it back down to it's home.
Site owner    IS 6:8  Psalm 91 
NSDQ      Author: Distant Thunder

Offline Bigdave_185

  • Raising Boys into Real Men!
  • Registered
  • **
  • Posts: 2832
    • View Profile
Re: "Tac Trac" a Tractor modified to do many things!
« Reply #148 on: June 22, 2016, 08:54:12 PM »
Looks good and I vote for the stickers that are teeth from the ol p-40


Raising boys into RealMen!!

Offline Flyin6

  • Administrator
  • *****
  • Posts: 19994
    • View Profile
Re: "Tac Trac" a Tractor modified to do many things!
« Reply #149 on: June 22, 2016, 08:59:35 PM »
Looks good and I vote for the stickers that are teeth from the ol p-40


Raising boys into RealMen!!
Not liking the ballot shredder?
Site owner    IS 6:8  Psalm 91 
NSDQ      Author: Distant Thunder