Hello Guest

Author Topic: Hide Site/Bug-out location Construction, Part 5  (Read 16036 times)

0 Members and 1 Guest are viewing this topic.

Offline Flyin6

  • Administrator
  • *****
  • Posts: 20007
    • View Profile
Re: Hide Site/Bug-out location Construction, Part 5
« Reply #100 on: October 01, 2017, 10:42:22 PM »
This big heavy thing is a hydraulic bucket coupler.

I was considering just removing it and attaching the bucket directly to the stick to have fewer moving parts to eventually wear out.

But I just ran across a 20" ditching bucket that would be ideal to dig that electrical and water pipe trench from the well up to the cabin area, so I guess I'll just clean it up and paint it along with the rest of Chief
Site owner    IS 6:8  Psalm 91 
NSDQ      Author: Distant Thunder

Offline Flyin6

  • Administrator
  • *****
  • Posts: 20007
    • View Profile
Re: Hide Site/Bug-out location Construction, Part 5
« Reply #101 on: October 01, 2017, 10:44:31 PM »
I still can't believe my 66HP tractor could lift those boulders, but it did. The largest one, it would only loft maybe an inch so I slowly bounced if off terra-firma all the way to the wall site
Site owner    IS 6:8  Psalm 91 
NSDQ      Author: Distant Thunder

Offline Flyin6

  • Administrator
  • *****
  • Posts: 20007
    • View Profile
Re: Hide Site/Bug-out location Construction, Part 5
« Reply #102 on: October 01, 2017, 10:46:11 PM »
Oh yes,

CARREP: WHile maneuvering with one of those stones and trying to tip the tractor over I heard a "Crunch."

I later discovered what made the sound
Site owner    IS 6:8  Psalm 91 
NSDQ      Author: Distant Thunder

Offline Flyin6

  • Administrator
  • *****
  • Posts: 20007
    • View Profile
Re: Hide Site/Bug-out location Construction, Part 5
« Reply #103 on: October 01, 2017, 10:48:47 PM »
Using the big tractor to move and position boulders, and the smaller "Cute" one to haul gravel, the wall came up bit by bit and became very stable. I'm thinking that ought to do some retaining of the hillside!
Site owner    IS 6:8  Psalm 91 
NSDQ      Author: Distant Thunder

Offline Flyin6

  • Administrator
  • *****
  • Posts: 20007
    • View Profile
Re: Hide Site/Bug-out location Construction, Part 5
« Reply #104 on: October 01, 2017, 10:50:06 PM »
Then a couple yards of Kentucky's finest #57 to finish off the job
Site owner    IS 6:8  Psalm 91 
NSDQ      Author: Distant Thunder

Offline Flyin6

  • Administrator
  • *****
  • Posts: 20007
    • View Profile
Re: Hide Site/Bug-out location Construction, Part 5
« Reply #105 on: October 01, 2017, 10:52:52 PM »
^^^^Obviously loads of work still to perform there as I go around the corner and hand stack the rest of it bit by skin crackin bit

Have a wee bit of a problem with mice (Get it: "Wee bit" as in mice are tiny?? ;-)

I've had a few, so in preparation for the cold when they come home to roost, I have left some gifts for them!
Site owner    IS 6:8  Psalm 91 
NSDQ      Author: Distant Thunder

Offline Bigdave_185

  • Raising Boys into Real Men!
  • Registered
  • **
  • Posts: 2838
    • View Profile
Re: Hide Site/Bug-out location Construction, Part 5
« Reply #106 on: October 01, 2017, 11:04:51 PM »
So no idea what is wrong with the bull dozer


Sent from my iPhone using Tapatalk

Offline TexasRedNeck

  • punching bag for moderator humor
  • Registered
  • **
  • Posts: 6499
    • View Profile
Re: Hide Site/Bug-out location Construction, Part 5
« Reply #107 on: October 01, 2017, 11:50:51 PM »
early bird gets the worm....but the second mouse gets the cheese....

Plan on bar-b-qing the mice?
Kids today don't know how easy they have it. When I was young, I had to walk 9 feet through shag carpet to change the TV channel.

Joshua 6:20-24

Offline Flyin6

  • Administrator
  • *****
  • Posts: 20007
    • View Profile
Re: Hide Site/Bug-out location Construction, Part 5
« Reply #108 on: October 02, 2017, 03:48:38 PM »
So no idea what is wrong with the bull dozer


Sent from my iPhone using Tapatalk
I've got Richard and Larry of Southeastern on it

They are great people!

Richard is going to figure out how to set up a pressure gage which I will then attach to the SCV (Secondary Control Valve) and do a pressure check

From there we will know if it's a SCV problem or the hydraulic pump itself.

Either way, it will get fixed and Sarge will get back in service soon...I need it to work!
Site owner    IS 6:8  Psalm 91 
NSDQ      Author: Distant Thunder

Offline Bigdave_185

  • Raising Boys into Real Men!
  • Registered
  • **
  • Posts: 2838
    • View Profile
Re: Hide Site/Bug-out location Construction, Part 5
« Reply #109 on: October 02, 2017, 04:18:27 PM »
Not being familiar with those.  What drives the trac? Is there a hydrologic system that turns the drive wheels? Some of the large systems use electric motors,  I just don't picture a transmission and drive shaft with that much weight


Sent from my iPhone using Tapatalk

Offline nmeyer414

  • Administrator
  • *****
  • Posts: 3555
    • View Profile
Re: Hide Site/Bug-out location Construction, Part 5
« Reply #110 on: October 03, 2017, 09:00:04 AM »
Try one of these for your mice problems

https://www.automatictrap.com/shop/a24/
Nate

Give me coffee for the things I can change and Bourbon for the things I cannot!

Offline Bear9350

  • Registered
  • **
  • Posts: 609
    • View Profile
Re: Hide Site/Bug-out location Construction, Part 5
« Reply #111 on: October 03, 2017, 09:30:57 AM »
A simple trap that we set-up at the cabin and other places that we don't check daily.  Fill a 5 gallon bucket or similar half full of water.  push a stick or rod through an empty soda can.  Put a couple strips of peanut butter down the can.  Place the can over the bucket so that the can is in the middle of the bucket.  The idea is that the mouse will crawl out to the can on the rod.  When it crawls up on the can to get the bait, the can rotates and the mouse drops into the bucket and drowns in the water.  The can should still have bait on it and continue to work.  Depending on where you place the bucket you may need to build a ramp up to the bucket.

Offline Flyin6

  • Administrator
  • *****
  • Posts: 20007
    • View Profile
Re: Hide Site/Bug-out location Construction, Part 5
« Reply #112 on: October 03, 2017, 09:42:33 AM »
Not being familiar with those.  What drives the trac? Is there a hydrologic system that turns the drive wheels? Some of the large systems use electric motors,  I just don't picture a transmission and drive shaft with that much weight


Sent from my iPhone using Tapatalk
Its an ingenious system wrought from the minds of engineers
The engine turns several hydraulic pumps, one of which is called a charge pump. This charge pump supplies pressure for a torque converter and a control valve system.
Now this torque converter powered by the hydraulic pump and driven by the engine flywheel drives a transmission which has forward/reverse and high and low range.
That transmission connects to a right and a left transmission which are bolted to each track's final drive. Those transmissions also have a high and a low. Essentially you have three different speed ranges along with forward and reverse. That is how the thing is steered. Since thery are independent of each other, one track can be in forward low and the other in reverse high or middle or low. The different track speeds account for different turning radius(s) which allows me to tear up all sorts of virgin field grass!

Now the hydraulic system which is acting up is not associated with this drive system at all. It has a much larger pump which provides pressure and flow for a couple of 5" cylinders and a couple of 4" cylinders (Read: Lotza fluid needed)
Verstande?
Site owner    IS 6:8  Psalm 91 
NSDQ      Author: Distant Thunder

Offline Flyin6

  • Administrator
  • *****
  • Posts: 20007
    • View Profile
Re: Hide Site/Bug-out location Construction, Part 5
« Reply #113 on: October 03, 2017, 09:44:00 AM »
A simple trap that we set-up at the cabin and other places that we don't check daily.  Fill a 5 gallon bucket or similar half full of water.  push a stick or rod through an empty soda can.  Put a couple strips of peanut butter down the can.  Place the can over the bucket so that the can is in the middle of the bucket.  The idea is that the mouse will crawl out to the can on the rod.  When it crawls up on the can to get the bait, the can rotates and the mouse drops into the bucket and drowns in the water.  The can should still have bait on it and continue to work.  Depending on where you place the bucket you may need to build a ramp up to the bucket.
That's clever!
Site owner    IS 6:8  Psalm 91 
NSDQ      Author: Distant Thunder

Offline Bigdave_185

  • Raising Boys into Real Men!
  • Registered
  • **
  • Posts: 2838
    • View Profile
Re: Hide Site/Bug-out location Construction, Part 5
« Reply #114 on: October 03, 2017, 11:00:06 AM »
Got it


Sent from my iPhone using Tapatalk

Online Bob/OlallaWa

  • Registered
  • **
  • Posts: 1017
    • View Profile
Re: Hide Site/Bug-out location Construction, Part 5
« Reply #115 on: October 03, 2017, 12:18:14 PM »

A simple trap that we set-up at the cabin and other places that we don't check daily.  Fill a 5 gallon bucket or similar half full of water.  push a stick or rod through an empty soda can.  Put a couple strips of peanut butter down the can.  Place the can over the bucket so that the can is in the middle of the bucket.  The idea is that the mouse will crawl out to the can on the rod.  When it crawls up on the can to get the bait, the can rotates and the mouse drops into the bucket and drowns in the water.  The can should still have bait on it and continue to work.  Depending on where you place the bucket you may need to build a ramp up to the bucket.
That's clever!


The bucket trap is included in the hunting camp supply list when the wall tents are used.

Offline Sammconn

  • A Guy in the Sticks
  • Registered
  • **
  • Posts: 2564
    • View Profile
Re: Hide Site/Bug-out location Construction, Part 5
« Reply #116 on: October 03, 2017, 12:22:54 PM »
A simple trap that we set-up at the cabin and other places that we don't check daily.  Fill a 5 gallon bucket or similar half full of water.  push a stick or rod through an empty soda can.  Put a couple strips of peanut butter down the can.  Place the can over the bucket so that the can is in the middle of the bucket.  The idea is that the mouse will crawl out to the can on the rod.  When it crawls up on the can to get the bait, the can rotates and the mouse drops into the bucket and drowns in the water.  The can should still have bait on it and continue to work.  Depending on where you place the bucket you may need to build a ramp up to the bucket.
That's clever!
Might even be genius!

Now sort ole Sarge out so you can get back at dirt movin'.
Sounds like the plan is in place.
And really, only a shovel in the CARREP, that's pretty good.
I'm not counting Sarge getting ornery as part of it, as stuff happens, you didn't break it, well CARRRP worthy as of yet.
I just don't want to wind up missing a digit or limb.  I can sometimes get in a hurry to get results.
Sam

Offline Flyin6

  • Administrator
  • *****
  • Posts: 20007
    • View Profile
Re: Hide Site/Bug-out location Construction, Part 5
« Reply #117 on: October 07, 2017, 09:41:41 PM »
The preliminary test was completed to test the hydraulic pressure of the hydraulic pump.

The test indicates the system is operating at only 700 psi, well below the 2150 psi that would be ideal.

Now the smart guys can chew on the test results and come up with what's next
Site owner    IS 6:8  Psalm 91 
NSDQ      Author: Distant Thunder

Offline Flyin6

  • Administrator
  • *****
  • Posts: 20007
    • View Profile
Re: Hide Site/Bug-out location Construction, Part 5
« Reply #118 on: October 07, 2017, 09:45:20 PM »
Well the past few days has been festooned with one CARREP after another.

It started about as soon as i showed up. I flipped on the air compressor to find the air hissing and escaping from a broken fitting. The thing just snapped in half with not so much as my even touching it.
Site owner    IS 6:8  Psalm 91 
NSDQ      Author: Distant Thunder

Offline Flyin6

  • Administrator
  • *****
  • Posts: 20007
    • View Profile
Re: Hide Site/Bug-out location Construction, Part 5
« Reply #119 on: October 07, 2017, 09:48:58 PM »
CARREP #2: I fixed that then went off to do a little bush hogging. I have another 30+ acres to get done before the rains come in.

I was backing over small cedar trees with the cutter raised, and one of the blades let loose. I guess having it hit so many rocks in its short life must have cracked the hardened steel. This time it did not come flying through the side like the last time.
Site owner    IS 6:8  Psalm 91 
NSDQ      Author: Distant Thunder

Offline Flyin6

  • Administrator
  • *****
  • Posts: 20007
    • View Profile
Re: Hide Site/Bug-out location Construction, Part 5
« Reply #120 on: October 07, 2017, 09:50:23 PM »
The thing has been working well, although has been taking a beating
Site owner    IS 6:8  Psalm 91 
NSDQ      Author: Distant Thunder

Offline Flyin6

  • Administrator
  • *****
  • Posts: 20007
    • View Profile
Re: Hide Site/Bug-out location Construction, Part 5
« Reply #121 on: October 07, 2017, 09:52:57 PM »
With the old John Deere cutter laying where I parked it, I thought I could just pull the blades off of it and bolt them onto the Land Pride...But the stump jumper discs were of different diameters
Site owner    IS 6:8  Psalm 91 
NSDQ      Author: Distant Thunder

Offline Flyin6

  • Administrator
  • *****
  • Posts: 20007
    • View Profile
Re: Hide Site/Bug-out location Construction, Part 5
« Reply #122 on: October 07, 2017, 09:55:31 PM »
So, off to the nearest tractor store, a Massey dealership who actually had some Land Pride parts and the exact blades I needed! $122 later and I was back in business
Site owner    IS 6:8  Psalm 91 
NSDQ      Author: Distant Thunder

Offline Flyin6

  • Administrator
  • *****
  • Posts: 20007
    • View Profile
Re: Hide Site/Bug-out location Construction, Part 5
« Reply #123 on: October 07, 2017, 09:57:18 PM »
Just for reference, I photoed the blade part number. Here is the remaining blade that is not in bad shape at all
Site owner    IS 6:8  Psalm 91 
NSDQ      Author: Distant Thunder

Offline Flyin6

  • Administrator
  • *****
  • Posts: 20007
    • View Profile
Re: Hide Site/Bug-out location Construction, Part 5
« Reply #124 on: October 07, 2017, 09:59:14 PM »
And I put the cutter to the test:
Site owner    IS 6:8  Psalm 91 
NSDQ      Author: Distant Thunder

Offline Flyin6

  • Administrator
  • *****
  • Posts: 20007
    • View Profile
Re: Hide Site/Bug-out location Construction, Part 5
« Reply #125 on: October 07, 2017, 10:02:09 PM »
The other objective to this trip, other than testing Sarge, was to get the frame into place for the outhouse. It is long past due to get that thing delivered and placed into service.

First I cemented four posts into the ground a few feet from the hole the boys dug
Site owner    IS 6:8  Psalm 91 
NSDQ      Author: Distant Thunder

Offline Flyin6

  • Administrator
  • *****
  • Posts: 20007
    • View Profile
Re: Hide Site/Bug-out location Construction, Part 5
« Reply #126 on: October 07, 2017, 10:03:42 PM »
Then I got busy with the sawmill and cut the framing timbers out of some dried Cedar logs I harvested some time ago
Site owner    IS 6:8  Psalm 91 
NSDQ      Author: Distant Thunder

Offline Flyin6

  • Administrator
  • *****
  • Posts: 20007
    • View Profile
Re: Hide Site/Bug-out location Construction, Part 5
« Reply #127 on: October 07, 2017, 10:05:58 PM »
The outhouse will sit in one corner of a small deck. I also cut up some true dimension 1 1/4" planks for the decking
Site owner    IS 6:8  Psalm 91 
NSDQ      Author: Distant Thunder

Offline Flyin6

  • Administrator
  • *****
  • Posts: 20007
    • View Profile
Re: Hide Site/Bug-out location Construction, Part 5
« Reply #128 on: October 07, 2017, 10:07:09 PM »
Here is all the framing pieces, well, almost all of them
Site owner    IS 6:8  Psalm 91 
NSDQ      Author: Distant Thunder

Offline Flyin6

  • Administrator
  • *****
  • Posts: 20007
    • View Profile
Re: Hide Site/Bug-out location Construction, Part 5
« Reply #129 on: October 07, 2017, 10:09:09 PM »
I cut one post then leveled the remaining three using that post as a reference
Site owner    IS 6:8  Psalm 91 
NSDQ      Author: Distant Thunder

Offline Flyin6

  • Administrator
  • *****
  • Posts: 20007
    • View Profile
Re: Hide Site/Bug-out location Construction, Part 5
« Reply #130 on: October 07, 2017, 10:11:15 PM »
Then I countersunk holes for some long 1/2" lag bolts which secured the long beans to the piers
Site owner    IS 6:8  Psalm 91 
NSDQ      Author: Distant Thunder

Offline Flyin6

  • Administrator
  • *****
  • Posts: 20007
    • View Profile
Re: Hide Site/Bug-out location Construction, Part 5
« Reply #131 on: October 07, 2017, 10:12:48 PM »
I canted the left side (Facing the outhouse front door) to best utilize the slope of the terrain and add some architectural interest to the decking to come

Funny, but if you drop anything, guess where it is going?
« Last Edit: October 07, 2017, 10:13:55 PM by Flyin6 »
Site owner    IS 6:8  Psalm 91 
NSDQ      Author: Distant Thunder

Offline stlaser

  • Registered
  • **
  • Posts: 5040
    • View Profile
Re: Hide Site/Bug-out location Construction, Part 5
« Reply #132 on: October 07, 2017, 10:12:58 PM »
 :likebutton:
Unretired, sweeping floor at GLO once again & making coffee.

Offline TexasRedNeck

  • punching bag for moderator humor
  • Registered
  • **
  • Posts: 6499
    • View Profile
Re: Hide Site/Bug-out location Construction, Part 5
« Reply #133 on: October 07, 2017, 10:13:53 PM »
Don, one thing I've learned is to keep spare parts on hand.  If I break blades, I order two sets so that I always have extra on hand.  When I use the spares, I order more so that I always have some.

Looking good. Sorry to hear about Sarge.
Kids today don't know how easy they have it. When I was young, I had to walk 9 feet through shag carpet to change the TV channel.

Joshua 6:20-24

Offline Flyin6

  • Administrator
  • *****
  • Posts: 20007
    • View Profile
Re: Hide Site/Bug-out location Construction, Part 5
« Reply #134 on: October 07, 2017, 10:15:00 PM »
Don, one thing I've learned is to keep spare parts on hand.  If I break blades, I order two sets so that I always have extra on hand.  When I use the spares, I order more so that I always have some.

Looking good. Sorry to hear about Sarge.
Ah, it's just part of the process...
Site owner    IS 6:8  Psalm 91 
NSDQ      Author: Distant Thunder

Offline Flyin6

  • Administrator
  • *****
  • Posts: 20007
    • View Profile
Re: Hide Site/Bug-out location Construction, Part 5
« Reply #135 on: October 07, 2017, 10:19:27 PM »
Cranking those lag screws in was a workout! But I needed a good "Lose your breath" workout and this thing delivered several times over!

I can't believe I had just purchased a new 20 volt dewalt impact gun. Would have been perfect for this job. But it would have probably ended up in the hole!

So the base frame is in. THe outhouse 63" X 51" will rest on the rectangle. THe rest will be deck space along with a short ramp
Site owner    IS 6:8  Psalm 91 
NSDQ      Author: Distant Thunder

Offline Flyin6

  • Administrator
  • *****
  • Posts: 20007
    • View Profile
Re: Hide Site/Bug-out location Construction, Part 5
« Reply #136 on: October 07, 2017, 10:23:15 PM »
CARREP #3: One can never, ever, ever, bushhog anything without something falling apart. Man, my helicopter vibrated a lot as well, darned glad it was more reliable. But then again I didn't smash the rotor blades into rocks (Trees, yes) every five minutes.

Can you see what happened?
Site owner    IS 6:8  Psalm 91 
NSDQ      Author: Distant Thunder

Offline Flyin6

  • Administrator
  • *****
  • Posts: 20007
    • View Profile
Re: Hide Site/Bug-out location Construction, Part 5
« Reply #137 on: October 07, 2017, 10:25:19 PM »
LIke always with only one side holding on, it was cutting just fine!

That was around 1730, and with the weather coming in, I parked it and called it a good days work
Site owner    IS 6:8  Psalm 91 
NSDQ      Author: Distant Thunder

Offline Flyin6

  • Administrator
  • *****
  • Posts: 20007
    • View Profile
Re: Hide Site/Bug-out location Construction, Part 5
« Reply #138 on: October 07, 2017, 10:26:51 PM »
And, they wanted to go home
Site owner    IS 6:8  Psalm 91 
NSDQ      Author: Distant Thunder

Offline stlaser

  • Registered
  • **
  • Posts: 5040
    • View Profile
Re: Hide Site/Bug-out location Construction, Part 5
« Reply #139 on: October 07, 2017, 10:37:36 PM »
Bush hogs are like off road race trucks, you need to do a bolt check every couple hours of use.....
Unretired, sweeping floor at GLO once again & making coffee.

Offline Flyin6

  • Administrator
  • *****
  • Posts: 20007
    • View Profile
Re: Hide Site/Bug-out location Construction, Part 5
« Reply #140 on: October 07, 2017, 10:46:12 PM »
Bush hogs are like off road race trucks, you need to do a bolt check every couple hours of use.....
The pins and clips keep falling out. No loose bolts.

Here is my proposed fix: Obviously new pins to replace the lost ones, but this time, no clips, but actual bolts with nylon lock nuts to retain them
Site owner    IS 6:8  Psalm 91 
NSDQ      Author: Distant Thunder

Offline stlaser

  • Registered
  • **
  • Posts: 5040
    • View Profile
Re: Hide Site/Bug-out location Construction, Part 5
« Reply #141 on: October 07, 2017, 10:49:41 PM »
What kinda clips you been using?
Unretired, sweeping floor at GLO once again & making coffee.

Offline Flyin6

  • Administrator
  • *****
  • Posts: 20007
    • View Profile
Re: Hide Site/Bug-out location Construction, Part 5
« Reply #142 on: October 08, 2017, 02:58:42 PM »
What kinda clips you been using?
All kinds Shawn.

The black spring circular clips last the longest. I have the standard punch in clothes line lookin clips of all sizes. I have used cadmium plated and black oxide, I have used American, Mexican, and Chinaman clips, but none last.

I hear Farmers use the bolts and lock nuts with great success.

That stepped pin that fell out of the bush hog tabs costs $30, and that's the second one that has fallen out.
« Last Edit: October 08, 2017, 04:35:21 PM by Flyin6 »
Site owner    IS 6:8  Psalm 91 
NSDQ      Author: Distant Thunder

Offline stlaser

  • Registered
  • **
  • Posts: 5040
    • View Profile
Re: Hide Site/Bug-out location Construction, Part 5
« Reply #143 on: October 08, 2017, 04:18:59 PM »
Copy, bummer
Unretired, sweeping floor at GLO once again & making coffee.

Offline TexasRedNeck

  • punching bag for moderator humor
  • Registered
  • **
  • Posts: 6499
    • View Profile
Re: Hide Site/Bug-out location Construction, Part 5
« Reply #144 on: October 08, 2017, 07:35:54 PM »
yeah, maybe a visual inspection before use would be a good idea....jus sayin.
Kids today don't know how easy they have it. When I was young, I had to walk 9 feet through shag carpet to change the TV channel.

Joshua 6:20-24

Offline nmeyer414

  • Administrator
  • *****
  • Posts: 3555
    • View Profile
Re: Hide Site/Bug-out location Construction, Part 5
« Reply #145 on: October 08, 2017, 09:19:06 PM »
But warrant occifer dont do pre fights..........stickpoke......
Nate

Give me coffee for the things I can change and Bourbon for the things I cannot!

Offline Flyin6

  • Administrator
  • *****
  • Posts: 20007
    • View Profile
Re: Hide Site/Bug-out location Construction, Part 5
« Reply #146 on: October 08, 2017, 09:52:11 PM »
yeah, maybe a visual inspection before use would be a good idea....jus sayin.
I do...These things fall apart during use. The excessive vibration and a number of sticks working through the voids are the likely culprits.
Site owner    IS 6:8  Psalm 91 
NSDQ      Author: Distant Thunder

Offline Mrwoody

  • Registered
  • **
  • Posts: 48
    • View Profile
Re: Hide Site/Bug-out location Construction, Part 5
« Reply #147 on: October 08, 2017, 10:04:46 PM »
30.00 would buy a lot of safety wire or crimp to fit mini cables
2008 CCLB LTZ  EFI 4" ex

Offline stlaser

  • Registered
  • **
  • Posts: 5040
    • View Profile
Re: Hide Site/Bug-out location Construction, Part 5
« Reply #148 on: October 08, 2017, 10:13:28 PM »
Safety! Whoa hold up there now....... I don't think Big D will be using anything with the word safety in it! :popcorn:
Unretired, sweeping floor at GLO once again & making coffee.

Offline Flyin6

  • Administrator
  • *****
  • Posts: 20007
    • View Profile
Re: Hide Site/Bug-out location Construction, Part 5
« Reply #149 on: October 08, 2017, 10:55:00 PM »
Safety! Whoa hold up there now....... I don't think Big D will be using anything with the word safety in it! :popcorn:
Naw, no safety needed here

That stuff can kill (from boredom!)
Site owner    IS 6:8  Psalm 91 
NSDQ      Author: Distant Thunder