Got my Miller 211 dual voltage mig and it works great! Had a small issue with a plug I covered in another thread, but was my fault ::)
Anyway I got this but still had my cart from my Lincoln 175 mig. Thought sure it will fit and it did. However it sat low, the Mig rubbed on the bottle and there was NO room under it cept for little things. Heck I wanted my plasma down there. Why not carry it all together when you use it together,,,,,,,,,,,,
So I look at the cart and it is a simple 2 inch angle on the front and flange across the back. So why not just move the front 2 inch angle to the back and make new ones for the front?
Take a couple measurements and a piece of 2 inch angle x 36 should just do it. $5 at the local metal shop and $2 for more nuts/bolts.
So I take it apart, cut the angle to 18 inches on the band saw, mark a few holes with a silver sharpie (great for metal work guys) and drill a few 1/4 in holes.