This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Messages - JR
Pages: 1 ... 180 181 [182] 183 184 ... 270
9051
« on: March 29, 2017, 12:26:56 PM »
You and SD can come out of the shadows together!!!!
9052
« on: March 29, 2017, 12:23:29 PM »
Probably right after thinking it over a little more. Not building a 500hp pulling rig.
Back to reality,,,,,,,,,,,,
9053
« on: March 29, 2017, 10:15:21 AM »
 Black wheels are good.
9054
« on: March 29, 2017, 01:11:31 AM »
Anyway ordered the upper thermo housing so close to have all I need cept the engine mount and finalize the tranny (rebuild or not) and then I saw the the GM 6L90 transmission. Has an internal PCM, tap shift and braking. Would need a couple sensors but worth a look at. https://www.novak-adapt.com/knowledge/transmissions/automatic/6l80
9055
« on: March 29, 2017, 12:36:04 AM »
First fish is always a blast!
9056
« on: March 27, 2017, 09:41:49 PM »
Nice tinkertoy there. It does looks like they thought it out.
Those cables were driving me nuts thinking what are they for. That makes sense now!
9057
« on: March 27, 2017, 06:52:26 PM »
I have had that saved in my EBay list for awhile now. Is the part number the same or crossover?
9058
« on: March 26, 2017, 10:39:23 PM »
Dave try northern tool or harbor freight. They have fiberglass welding blankets cheap. I plan to get a couple and sew a blanket for less than $50
Sent from my iPhone using Tapatalk
I was thinking moving blanket would work pretty slick. What was your plan Tex?
Sent from my iPhone using Tapatalk
Sounds like BD welding on wood,,,,,,,,,,,,,,
9059
« on: March 26, 2017, 10:34:56 PM »
I listened to alot about this today. He is a sellout and nothing to show his term in the rep.
I hear he is on a short rope already, maybe this pulled it tight.
We elected Trump and his agenda, not the status quo,,,,,,,,,,,,,,
9060
« on: March 26, 2017, 10:29:30 PM »
9061
« on: March 26, 2017, 10:23:55 PM »
Ugg, just about finished with the garage. Doing the little stuff now.
9062
« on: March 26, 2017, 12:00:02 AM »
Welcome home.
9063
« on: March 25, 2017, 11:42:56 PM »
Nice work but don't get me started on headlights !!!
9064
« on: March 25, 2017, 11:34:44 PM »
Great work on getting it out fast. To bad you had too.
9065
« on: March 25, 2017, 09:52:14 PM »
That chili looks great.
9066
« on: March 25, 2017, 09:48:29 PM »
While cleaning the garage I kept moving a new/used vise around and said, enough of this. It was hard to use on the floor and not mounted.
I got this mount at HF awhile back for just $10. I did not plan on mounting it to the floor yet and the air compressor pallet seemed a good option for holding it down.
So I just lifted it a little, slide the base under the pallet and it was solid enough for everything but major wrenching.
The vise was a CL find, an older Wilton, "GM" brand with jaws 6in across and opens the same. It is smooth sans a little surface rust and dings. But hey, its a vise.
So a couple 1/2in bolts held it on just fine. Its a little close to the comp, but will do me for now.
9067
« on: March 25, 2017, 09:39:09 PM »
Nice work. I have 3 like that to put under my house soon for a room add on.
9068
« on: March 25, 2017, 09:35:02 PM »
I was just about to post about that. Thanks.
She came through surgery great, but they kept her overnight.
Got her around 1530 today, she was waiting in the chair as I drove up and hopped right in! She can't tell yet but I thought she was doing a little better. Then she went to Costco on her own to get samples (that is a weekly outing for her)
9069
« on: March 25, 2017, 09:30:04 PM »
Wow, that is nasty!!
So it took out the cam too? Looks like the crank got hot also.
You hear about this so rarely. Any idea on what happened?
9070
« on: March 25, 2017, 03:25:43 PM »
$6k for a trans?
Sent from my iPhone using Tapatalk
Who would spend that,,,,,,,,,,,,,
9071
« on: March 25, 2017, 03:23:21 PM »
Yes, I believe I am,,,,,,,,,,,, The second post  working on Dons comment
9072
« on: March 25, 2017, 12:19:49 PM »
Anything that keeps it from coming up off the track? You are cutting pretty big logs on there that may move. Heavy or not you don't want that to happen.
9073
« on: March 25, 2017, 12:59:40 AM »
With the help of a the kid across the street this 3/4 forged eye bolt found a home 25ft up.
Will use a cable to hold this end of the platform up.
9074
« on: March 25, 2017, 12:50:32 AM »
I can't explain the picture orientation but it works when blown up.
Got this far with the big SS nuts/bolts/screws/washers and a little of everything else. This little bit is going in the trash.
9075
« on: March 25, 2017, 12:45:22 AM »
Been finishing up the garage clean. I had really let it get bad. I can see more floor, much of the table which I moved for better access with a couple other items.
Even leveled the table (3/4 to even out the garage slope) and added a 2x4 to the center as it had sagged in the center.
Most boxes under the table are on mover dolly's. Then I hit the little parts bin!
9076
« on: March 25, 2017, 12:41:31 AM »
Worked on the garage and got another treehouse item done. The hardest yet was a 3/4 eyebolt about 25ft up. That is my neighbor up there.
More in the Spartan thread,,,,,,,,,,,,
9077
« on: March 25, 2017, 12:33:02 AM »
$62.40 without shipping bud.
What is that part number?
9078
« on: March 25, 2017, 12:25:21 AM »
Nice start there. That old tractor looks small. Even a pic of BD in there,,,,,  See it took until post 17 to break something, well done!! After watching the video and seeing this is there anything that keeps the saw from coming off the tract? Heavy or not there should be something.
9079
« on: March 24, 2017, 11:57:16 PM »
Nice toy Don.
It took EFI years to finally unlock the dodge trucks. The GM LBZs were the last year the ECM doesn't track what you are doing.
9080
« on: March 24, 2017, 10:31:01 PM »
For doing the fuel filter, there is a kit for a cut out inside the fender well. I highly recommend it but easy enough to make you own.
You cannot have to much filtration. I run a 5 micron at the tank with 5psi pump and a 2 micron cat up top.
9081
« on: March 24, 2017, 07:06:04 PM »
Very Nice.
Time for a bedliner and fluid change.
9082
« on: March 24, 2017, 04:32:40 PM »
Metal and flush, nice choice.
9083
« on: March 24, 2017, 03:25:57 PM »
270K
Lets all give him a call for fun,,,,,,,,,,,,
9084
« on: March 24, 2017, 01:12:38 PM »
Just found this. I have no issue but need to do the rub kit still.
I think we have the 263xd tcases. The snap ring kit was not listed for that case, but he has everything else it looks like.
9085
« on: March 24, 2017, 12:47:53 PM »
Great!!!
Dropped off mom this morning, she should be done about now.
9086
« on: March 24, 2017, 07:23:11 AM »
Sounds like a fair price and you have the bases covered.
I have 138k on mine with 100hp tune and it runs solid.
9087
« on: March 24, 2017, 01:33:40 AM »
The LBZ is a great truck, just like mine.
Pump rub. See if that has been fixed or taken care of before it leaked. The Tcase pump will rub on the rear housing, passenger side right in the gussets. I glued mine and it has held fine but I really need a new rear housing. If it has oil underneath, thats it.
You can tune and retune the LBZ and it leaves no traces. With those miles I bet it was a vacation truck.
The hubs and the upper joints wear fast. You have to jack it up by the lower A arm to check. Nether is a big deal and you can check front end slop too.
Pics look good but a few are from a dodge.
Price if you don't mind?
Good luck!!
9088
« on: March 23, 2017, 07:08:04 PM »
Perhaps the antenna didn't have enough RF grease.....
Sent from my iPhone using Tapatalk
The plastic one?
9089
« on: March 23, 2017, 02:09:17 PM »
Peppers good, onions NO.
9090
« on: March 23, 2017, 12:52:49 PM »
Similar happened to my 96 burb. Had the tranny serviced for a trip after a little blow by and lost it half way to canada.
9091
« on: March 23, 2017, 12:50:22 PM »
Why not.
9092
« on: March 23, 2017, 11:16:43 AM »
Oh no, lets not talk about fluids!!
9093
« on: March 23, 2017, 10:28:53 AM »
More Prayers sent, we need to keep those men around in good health.
On another note, My mother (Sally Bronk) goes in for a Pacemaker in the AM. She is 78 with COPD and mild heart issue and can barely cross a room right now.
She is the last of my family still on this great earth. She put up with my father who retired from the Marines (passed in 2000, 3xkorea-2xnam), me and my younger brother (passed in 89).
9094
« on: March 23, 2017, 12:08:23 AM »
You got me. That rod really did a job. Need pictures of inside when you get there.
9095
« on: March 22, 2017, 11:57:15 PM »
That will work.
9096
« on: March 22, 2017, 11:47:11 PM »
Technically yes, but the vast majority of them are being built like this one.
Sent from my SM-G935R4 using Tapatalk
I agree, built a couple.
9097
« on: March 22, 2017, 08:03:16 PM »
The 14 bolt is a great rear for what it is.
I think you said it had about 150K on it? If it has the 700r4 that is there life span.
9098
« on: March 22, 2017, 07:09:52 PM »
Sent and will resend. Dang he (they) are cute
9099
« on: March 22, 2017, 07:05:04 PM »
To tight on the block or squeezing it?
9100
« on: March 22, 2017, 03:59:45 PM »
Hard to see the 3rd pic, but lets go with it.
Any options on neck size? Stock rad has a smaller neck but adapters are easy.
thx
Pages: 1 ... 180 181 [182] 183 184 ... 270
|
Show Posts
