0 Members and 1 Guest are viewing this topic.
Could be a bad mag
Mag spring weak?Mag follower ganked up?Either way, test your dually wheel weight using the mag as a scale!
I'll try another mag. Gonna lube the bolt a bit more.
So, Bobby...being the calculating trained warrior NCO that you are. Take the appropriate action, Execute!
your standard grunt level CQB is just putting rounds and rounds on scary stuff till it stops scaring you!
Sean, some of the Privi does have a red ring around the bottom of the primer....jus sayin.SS109, and M855. With a preference for LC. No wolf unless I want to run malfunction drillsI run only mil spec ammo and reload to mil spec with H335 verified over a Ohler ChronoKoot, yes, the back pressure created by the can increases the gas pressure immensely. That really over gasses the bolt and slams the hell out of it if it is not moderated in any way. It also fouls everything including the mag. Thtas why some of the Spec Ops designated marksmen rifles have a switch block with two settings.Thats the first buffer spring I've ever worn out and its soley because the weapon has been run exclusively suppressed for about 5000-7000 rounds.http://www.syracordnance.com/collections/gas-blocks/products/gen-ii-750-adjustable-low-pro-solid-gas-blockhttp://slrrifleworks.com/index.php?route=product/product&path=57&product_id=582Probably give one of these a try
.458 SOCOM AR suppressed would be awesome. Do it.
Update. Threw a new buffer spring in it and it works like a champ. I have an H1 buffer I'll throw in tomorrow and order an adjustable gas block. The bolt is just beating the spring to death suppressed. I need to bleed some gas off
No. I threw it in the safe and pulled out another one. I believe it is the giessele trigger set to light on the second stage and it's causing it to double and triple then bolt override. I'll get to it at some point. Sent from my iPhone using Tapatalk