0 Members and 67 Guests are viewing this topic.
Pretty cool Jon and Dave.Pretty high altitude to still have that much snow? My place in Idaho was melted off about a month ago.Nate, I ran and spent a lot of money on maintaining, the higher end softeners at my house and shop. Finally switched to the cheaper ones and they work just as good, so far. (Like 800 on Amazon).Just throwing that out there
Nate, I ran and spent a lot of money on maintaining, the higher end softeners at my house and shop. Finally switched to the cheaper ones and they work just as good, so far. (Like 800 on Amazon).Just throwing that out there
Off to Idaho we go, where we stop, nobody knows.
Quote from: KensAuto on June 05, 2020, 12:17:24 PMOff to Idaho we go, where we stop, nobody knows.with that aux tank shouldn't be stopping often
Is that pad stamped and dyed?
Yes IIRC. On 3/4 stainless all thread the pull out for 6 inch is something stupid like 18000 lbs. given I have flagstone on top it’s probably only 4 in the slab but that’s still about 12000 each. Sent from my iPhone using Tapatalk
I just don't want to wind up missing a digit or limb. I can sometimes get in a hurry to get results.
I get to buy a new roof fan for the trailer. Sent from my iPhone using Tapatalk
I’d suggest other than a little BS luck that wheel is lost.
jon, did you get the camper axle figured out / fixed?