0 Members and 1 Guest are viewing this topic.
The fuel lines on my '06 LBZ are pretty far gone having come from Wisconsin. I bought new ones via a dealer on eBay, I couldn't beat the price! $203 w/ free shipping vs $350 for aftermarket.Anyway, received them yesterday and a quick glance inside the box before FedEx left they looked OK, but upon further review today...They had to bend them at the flex/rubber section to fit them in the box. That kink is no bueno.So, I have two options -- contact the seller/dealer and send them back (probably $50 or more in shipping costs, plus a possible restocking fee), or try to come up with a way to make it work. The first thought that comes to mind is some AN fittings with flexible hose. Now, I don't know a thing about AN fittings or how they're measured or what I would need to get this to work. I'm thinking that I'd need to treat this like brake lines and use a compression nut on the hard-line side and flare the line, the compression nut would then connect to an AN fitting that is compression to a flexible line. Thing is, I don't know where to begin with pieces and parts. I know the supply line is 1/2" OD (.510" according to calipers) and the return line is 3/8" OD (.385").So, what do I need to get?