Hello Guest

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - Nate

Pages: 1 ... 78 79 [80] 81 82 ... 112
3951
Firearms / Re: vehicle weapon mounts
« on: February 17, 2016, 07:50:02 PM »
let me message him and see what I can obtain

3952
What's linear ft. on that beast?
A bit over 35 feet me thinks

No fun to pull, I'll tell ya that

I would venture to guess that you have not pulled much length wise or else you may have something connected incorrectly? 

3953
Firearms / Re: vehicle weapon mounts
« on: February 17, 2016, 07:26:30 PM »
so from what I was able to gather, the metal pieces are rubberized and I thing as far as ordering goes it is all off facebook at the moment.  I did not see anything as far as a website goes.........................?!

3954
Firearms / vehicle weapon mounts
« on: February 17, 2016, 10:54:44 AM »
I came across this and thought it was pretty cool and thought I would share.

https://www.facebook.com/doughboy1962/posts/10205860122090363?pnref=story


3955
the real question don, has HH6 authorized you to make this modification since you have been instructed to not REDNECK UP this piece of equipment?

3957
What are you building? / Re: shower re-caulk
« on: February 12, 2016, 07:25:29 PM »
and once I talk to the land lord tomorrow, I will know if I am in for a tile removal/replacement/re-caulk on the wife's shower or if I am to just leave it alone and continue to rot and let him worry about it once I leave...............

3958
D.O.T. / Re: Big red is gunna be jealous...
« on: February 12, 2016, 07:23:30 PM »
that is still far fetched mike! 

3959
D.O.T. / Re: Big red is gunna be jealous...
« on: February 12, 2016, 05:38:00 PM »
I cannot go into detail because of certain things tate, but your not TTTTTOOOOOOOOOO far off with what you just said...........

3960
D.O.T. / Re: Big red is gunna be jealous...
« on: February 12, 2016, 04:38:18 PM »
cool concept..................

3961
What are you building? / Re: shower re-caulk
« on: February 11, 2016, 06:48:12 PM »
you should see the pic that JR got on his phone............#blushing..;D

3962
Build Threads / Re: S10 Blazer Mini Build
« on: February 11, 2016, 06:47:02 PM »
my experience from having an ankle reconstructed, its really not that bad and you will be surprised at what you can and cannot do with a cast on.  hell, I fenced half of my yard with the cast and crutches, but then again I also had this

https://www.google.com/search?q=game+ready+half+leg+boot+wrap&biw=1351&bih=756&source=lnms&sa=X&ved=0ahUKEwj808WQ8vDKAhVFVyYKHcLyARsQ_AUIBSgA&dpr=0.85

and the half leg boot wrap

http://www.gameready.com/professional-cold-compression-wraps

hit your insurance company up and make them give you one of these! this will truly be a life saver and you will be able to feel it thru the plaster and fiberglass cast.

3963
What are you building? / Re: shower re-caulk
« on: February 11, 2016, 06:32:24 PM »
heres the completed caulking, and JR you have one that was sent to your phone......??? ;D


3964
What are you building? / Re: shower re-caulk
« on: February 11, 2016, 06:23:20 PM »
youll get those on your phone..............ROFLMFAO!!!!!!!!!!!!!!!!!!!!!!!!!

3965
Construction and heavy equipment / Re: Ol’ SARGE aka BIG RED thread
« on: February 11, 2016, 06:22:39 PM »
sean, you just talked about the catfish!  duane is the only catfish driver round these parts and that's not very often these days.........ROFLMFAO!

3966
Firearms / Re: Need armor advise
« on: February 11, 2016, 04:51:52 PM »
I wouldn't say hate and discontent RN, I would say without discrimination of what the target was or contained!  ;D


3967
Firearms / Re: Need armor advise
« on: February 11, 2016, 04:50:43 PM »
I am with bobby on this one don, that looks more like a sabot round hole.  I saw 1 or a few of those during the invasion, and I must say WOW!

3968
What are you building? / Re: shower re-caulk
« on: February 11, 2016, 04:48:45 PM »
I will get a finished pic up here in a bit

3969
What are you building? / Re: shower re-caulk
« on: February 11, 2016, 02:44:51 PM »
I wouldnt expect anything less.

3970
What are you building? / Re: shower re-caulk
« on: February 11, 2016, 07:42:22 AM »
It would be analog, not digital.

3971
What are you building? / Re: shower re-caulk
« on: February 10, 2016, 08:53:04 PM »
ROFLMFAO!!!!!!!!!!!!!

3972
What are you building? / Re: shower re-caulk
« on: February 10, 2016, 05:31:41 PM »
did I miss something ken???

tater, I did not dump any bleach in the little holes.  there was no getting a scrub brush in there either.  that caulk lines up close look like boo boo because of how thick and wide I had to make them to ensure the whole corners got covered.

3973
What are you building? / Re: shower re-caulk
« on: February 10, 2016, 11:08:18 AM »
i am all about conservation, just not wanting to deal with black mold and having to re do a shower because things have rotted out.

3974
D.O.T. / Re: Go-Pro on a rotor blade: why you don't want to fly in a helo!
« on: February 09, 2016, 10:04:27 PM »
yeah, the DOT's are not going to understand what you just posted!

I understand it to an extent just from spending so much time with the crew and the airframe.

from what I could tell on the video, was there was some piece of equipment that was not doing what it was supposed to do????

3975
What are you building? / shower re-caulk
« on: February 09, 2016, 09:59:11 PM »
so I got to spend the better part of the afternoon into the late night scraping out the calcium buildup and the rotten caulk (or the lack there of ) and re-caulking my shower.

I did not get any pictures of the before hand, just the re-caulk.

here are the 2 spots that caused me to start this in the first place.  these areas were so black and nasty with mold and filth, I just could not stand it any more and had to do something about it.



and here are shots of the re-caulk on the sides and a fan pointing at the problem areas trying to dry them out so that I can re-caulk them tomorrow. 





basically from what I can tell, the moron that caulked the shower to begin with, only did so with a minimal amount of caulk, which caused the grout to fail over time and start letting water in.  the grout is shot in all of those areas, but I am not going to spend the time or the money ripping that entire shower out, re-building it and bringing it back to how it should have been done in the first place (I rent this house and have spent thousands of $$$ and time just trying to fix everything that the illegal border jumpers put together back in 62').

hopefully in the next day or 2 there will be enough water that has evaporated out of there and I can close those areas up and not have to share my wife's shower.

3976
Coffee Induced Early Morning Rant / Re: Have you forgotten?
« on: February 09, 2016, 08:21:17 PM »
enjoy it, if anything for me!  I cannot go there because of what it represents to me, just like the VVA wall and the WWII memorial!

I will leave it there!

3977
Share Your Recipe / Re: Super Bowl game day food
« on: February 07, 2016, 04:38:07 PM »
sliders look / sound good

3978
Share Your Recipe / Re: Super Bowl game day food
« on: February 07, 2016, 03:53:12 PM »
don't really have snacks, but I will post some pics of the spread that we are doing at the VFW.

3979
Real Man Knowledge base / Re: Bug out Bag Primmer
« on: February 07, 2016, 10:55:19 AM »
not sure about that, but I did find this stuff the other day and it was darned good!

http://www.jacklinks.com/products/small-batch-bacon-jerky

3980
Build Threads / Re: Kyle's LBZ Build
« on: February 06, 2016, 08:04:02 PM »
DAMN!

what was the gauge reading?

3981
Hide Site / Re: Hide/bugout site build thread
« on: February 05, 2016, 04:32:47 PM »
oh great!  we have occifers talking about explosives!  where is the combat engineer when you need him.........MMMMMAAAAATTTTTTTTTTTTTTTTT

3982
there went brain cells!

3983
Hide Site / Re: Hide/bugout site build thread
« on: February 04, 2016, 07:47:49 PM »
it almost looked like a corn crib instead of a cabin?

3984
Hide Site / Re: Hide/bugout site build thread
« on: February 04, 2016, 06:41:31 PM »
now theres a secret we didn't know about.  that's really cool, sounds like you may need to get a hold of the barnwood builders and have them come take a look.

3985
Hide Site / Re: Hide/bugout site build thread
« on: February 04, 2016, 06:06:21 PM »
we can obviously see that there has not been any police call being conducted..........SMH........pilots!

;D

3986
Hide Site / Re: Hide/bugout site build thread
« on: February 04, 2016, 04:38:22 PM »
so heres a question don!

has the privy been completed and made it to the site yet? 

if your gonna be having folks out there doing work and what not, they will want somewhere to go.

3987
Soldier Up / Re: The BIG SIX
« on: February 04, 2016, 02:03:43 PM »
Just want to share my basic workout where I have seen some big gains. It is awfully basic and it's a KISS routine fo sho!

The Big Six
Bench Press- Why we bench press? School of thought is bench press is irrelevant because the last time you ever pushed something off of your chest was when you bench pressed right? WRONG! The bench press is a compound movement working large muscle masses in your upper body. The pecs are a fast multiplying muscle.  Higher muscle mass equates to a higher metabolism equates to being able to hold more busch light! Also, pushing away ass holes requires muscles built on the bench! and tertiary to that a big chest is intimidating. The best way to win a fight is to walk away from it! Lying on your back, shoulders back, back slightly arched and core engaged, push barbell up and bring down till your elbows make a 90 and repeat.

Standing overhead press- another compound movement requiring balance muscles in your legs and core,  works your back and shoulders. Strong back and shoulders are always a must for a war fighter. Standing straight up, feet shoulder width, core engaged, bring barbell up to your chest and lift directly over your head keeping your neck as neutral as possible, bring down until your elbows make a 90 and repeat.
 

for a beginner, I would recommend seated  with a lighter weight until you can get the proper movement/form down.


Standing upward row- compound movement, works shoulders and back and biceps. Basically stand with feet shoulder width apart, slightly bent at the waist, core engaged, shoulders back and lift barbell in an upward motion to between your nipples and your chin!

Pull ups/Chin ups- more back, shoulders and arms. grasp the bar in an overhand grip slightly wider than shoulder width and lift yourself off of the ground until your chin is level with the bar lower yourself till your arms are straight and repeat. On your second set use an underhand grip/shoulder width apart and lift yourself up and lower in the same manner.

for a beginner, you can use the pull up/dip machine or you can use the lat pull down machine.  both of the machines work the same muscle groups, but it allows a beginner to get the proper form as well as provides assistance until you are able to lift your body weight.

Dead lifts- This works everything, never skip dead lifts, Barbell on the ground, grasp the bar one hand over/one underhand at shoulder width, butt slightly squatted, knees slightly bet, lower back arched and locked and pick it up and put it down!

Squats- all of your butt and legs. another elemental exercise not to skip. With the bar resting on your shoulders, feet slightly wider than shoulders, squat down as far as you can and stand back up!

I tend to incorporate this in two days. I do three one day and the other three the next. I do upper and lower, but you can do it however. I also add in either standing bicep curls, tricep dips, or some sort of calf work out in a superset somewhere! I alternate between 3-4 sets of 8 or 5 sets of 5 depending on how I am feeling and what I did the time before. When I can complete 3 sets of 8 of a particular weight and exercise for 2 consecutive workouts, I increase the weight.

Go Get Some!


3988
I just quickly browsed the link that I gave, and I must say that some folks have really done their due diligence and put together a stack of information that is impressive!

here is an example of what I just found.  http://www.dieselplace.com/forum/7233738-post10.html

3989
check out this page.  Diesel Place seems to be a much better knowledge base when it comes to non duramax diesel's.

http://www.dieselplace.com/forum/63-gm-diesel-engines/21-6-5l-diesel-engine/

they even have a stick with The 6.5L FAQ's... The Master List of Information and 6.5 Answers :  http://www.dieselplace.com/forum/63-gm-diesel-engines/21-6-5l-diesel-engine/53309-6-5l-faqs-master-list-information-6-5-answers.html

3990
Share Your Recipe / Re: whats for dinner tonight
« on: February 01, 2016, 09:09:56 PM »
here area a few acidic type marinade's:  lemon juice, lime juice, orange juice, coca cola, apple cider vinegar (do not use white vinegar, way to strong flavor wise!) here's a link for you.  http://tipnut.com/tenderizers-work/

3991
Coffee Induced Early Morning Rant / Re: why did/does it take this long!
« on: February 01, 2016, 01:25:15 PM »
the thing that I find funny/appalling/disgusting/whatever you want to call it;

is when some monkey a$$ media person wants to talk about trump or Hillary or some political figure using vets/service members/troops whatever you want to call them/us for political gains, but when it comes to a few people making billions off what it is/was we did, it all of a sudden becomes very hush hush and not talked about!

3992
Share Your Recipe / Re: whats for dinner tonight
« on: February 01, 2016, 01:20:58 PM »
make sure you get a good acidic marinade on that venison about 24 hours before you put in in the crock pot.  that way you can ensure that it will be nice and tender and not chewy.

3993
Build Threads / Re: 91 suburban
« on: February 01, 2016, 01:08:05 PM »
the children are getting a little restless jon, they need some more info on that truck.

3994
Coffee Induced Early Morning Rant / why did/does it take this long!
« on: February 01, 2016, 01:05:21 PM »
this has been public information for quite a few years now, why has it taken this long???  people are all of a sudden getting outraged and upset?!

https://www.google.com/?gws_rd=ssl#q=wounded+warrior+project+breaking+news

3995
Share Your Recipe / Re: whats for dinner tonight
« on: February 01, 2016, 07:39:44 AM »
I think i had like 2 pounds when all said and done; 1lb of cubed and 1lb of ground.

That venison version sounds mouthwatering bobby.

I got the idea for this chili from this recipe.  I did not use the peppers because i didnt feel like going to the store,  so i used some of the home canned tomato sauce, paste and stewed.  http://www.foodnetwork.com/recipes/guy-fieri/texas-chili.html

3996
Tires, Wheels, and Suspension / Re: Upper/Lower Control Arms
« on: January 31, 2016, 07:34:05 PM »
if you got 150k on wheel bearings, you did darned good!

maybe think about the rare parts gen 2 tie rod ends.

3997
Share Your Recipe / Re: whats for dinner tonight
« on: January 31, 2016, 07:31:12 PM »
well let the simmer for about an hour or so and plate it up!

3998
Share Your Recipe / Re: whats for dinner tonight
« on: January 31, 2016, 07:30:13 PM »
we had about 8 or so petit sirloins that had been in the freezer since july and decided to grind half and slice the other half and make some chili.


3999
Gotta bring what cha want to use, cause you aien't gonna find it enroute!

im with you on this one don, but lets be real!  that thing is all up in your face to the point of being able to smell your own breath while driving down the road at 100mph............. ??? ?!

I concur that the white has to go.

4000
Build Threads / Re: The Bus
« on: January 29, 2016, 06:17:35 PM »
Nate's being dirty...American Pie dude.

trying to throw me under the bus...............   :o  :P

Pages: 1 ... 78 79 [80] 81 82 ... 112
SimplePortal 2.3.6 © 2008-2014, SimplePortal