TOOLS, CONSTRUCTION, ALTERNATIVE ENERGY > Hand Tools, Power Tools, Welders, etc
Survival tool box
Flyin6:
OK people, this is how this is gonna work.
I am kitting out the new tool boxes for Square D with some newly purchased tools and some old ones as well.
I listed a good start to a tool kit below. If after reviewing the list, which should be a good basic list for anyone poking around here and asking "What tools should I carry?" then we can point them to this list. Maybe if we get enough participation I can sticky the thing.
So the condition is you have a Bug-Out vehicle. Lets say an older 2500 series since they seem to be most common. This theoretical truck is made by the FordChevyMopar company. Space will be limited so the size of the tool box needs to be a consideration.
Do not include parts or expendables, as those will be listed in a separate thread.
If you want to add to the list, then copy and paste the existing list and make your additions at the bottom or perhaps where they should fall, but make your addition a different color font so we can see the changes.
OK clear on the procedure??
So without further adieu'
Metric combination wrenches 8mm-18mm
SAE combo wrenches 5/16 to 1"
Additional wrenches 22mm, 24mm,
12" crescent adjustable wrench
3/8" socket set, SAE std and deep
3/8" Metric sockets, std and deep
1/2" ratchet, with sliding handle strong enough to use as a breaker bar
1/2" drive deep SAE sockets up to 1"
1/2" dr. Metric sockets
3/8" and 1/2" wobble extensions
Flex joint 3/8" and 1/2" sockets
#1&2 cross tip screwdriver
Flat tip screw driver
Stubby flat tip and cross tip screwdrivers
Standard pliers
Wire cutter pliers
Needle nose pliers
Snap ring pliers
Bolt cutter
Utility knife like a Leatherman
medium ball peen hammer
Small grease gun
Socket/special tool to fit the large nut or spanner type nut that retains your axle or hub at the front axle
Butane soldering torch
Dawg25385:
Metric combination wrenches 8mm-18mm
SAE combo wrenches 5/16 to 1"
Additional wrenches 22mm, 24mm,
12" crescent adjustable wrench
3/8" socket set, SAE std and deep
3/8" Metric sockets, std and deep
1/2" ratchet, with sliding handle strong enough to use as a breaker bar
1/2" drive deep SAE sockets up to 1"
1/2" dr. Metric sockets
3/8" and 1/2" wobble extensions
Flex joint 3/8" and 1/2" sockets
#1&2 cross tip screwdriver
Flat tip screw driver
Stubby flat tip and cross tip screwdrivers
Standard pliers
Wire cutter pliers
Needle nose pliers
Snap ring pliers
Bolt cutter
Utility knife like a Leatherman
medium ball peen hammer
Small grease gun
Socket/special tool to fit the large nut or spanner type nut that retains your axle or hub at the front axle
Butane soldering torch
Strap wrench/filter-wrench
Sammconn:
--- Quote from: Dawg25385 on July 01, 2015, 05:59:04 PM ---Metric combination wrenches 8mm-18mm 19mm even tho 3/4 fits most
SAE combo wrenches 5/16 to 1"
Additional wrenches 22mm, 24mm,
12" crescent adjustable wrench
3/8" socket set, SAE std and deep
3/8" Metric sockets, std and deep
1/2" ratchet, with sliding handle strong enough to use as a breaker bar
1/2" drive deep SAE sockets up to 1"
1/2" dr. Metric sockets
3/8" and 1/2" wobble extensions
Flex joint 3/8" and 1/2" sockets
#1&2 cross tip screwdriver
Flat tip screw driver
Stubby flat tip and cross tip screwdrivers
Standard pliers
Wire cutter pliers
Needle nose pliers
Snap ring pliers
Bolt cutter
Utility knife like a Leatherman
medium ball peen hammer
Small grease gun
Socket/special tool to fit the large nut or spanner type nut that retains your axle or hub at the front axle possibly the rear axle nut socket as well
Butane soldering torch
Strap wrench/filter-wrench[color]
Pickle fork and 3-4 lb hammer(front end repairs/parts)
--- End quote ---
Flyin6:
OK, others?
rasimmo:
--- Quote from: Sammconn on July 01, 2015, 07:58:04 PM ---
--- Quote from: Dawg25385 on July 01, 2015, 05:59:04 PM ---Metric combination wrenches 8mm-18mm 19mm even tho 3/4 fits most
SAE combo wrenches 5/16 to 1"
Additional wrenches 22mm, 24mm,
12" crescent adjustable wrench
3/8" socket set, SAE std and deep
3/8" Metric sockets, std and deep
1/2" ratchet, with sliding handle strong enough to use as a breaker bar
1/2" drive deep SAE sockets up to 1"
1/2" dr. Metric sockets
3/8" and 1/2" wobble extensions
Flex joint 3/8" and 1/2" sockets
#1&2 cross tip screwdriver
Flat tip screw driver
Stubby flat tip and cross tip screwdrivers
Standard pliers
Wire cutter pliers
Needle nose pliers
Snap ring pliers
Bolt cutter
Utility knife like a Leatherman
medium ball peen hammer
Small grease gun
Socket/special tool to fit the large nut or spanner type nut that retains your axle or hub at the front axle possibly the rear axle nut socket as well
Butane soldering torch
Strap wrench/filter-wrench[color]
Pickle fork and 3-4 lb hammer(front end repairs/parts)
Aluminum pipe wrenches 14" or 18"
--- End quote ---
--- End quote ---
Navigation
[0] Message Index
[#] Next page
Go to full version