Hello Guest

Author Topic: Chop saw metal blades  (Read 2186 times)

0 Members and 1 Guest are viewing this topic.

Offline Flyin6

  • Head cook and bottle washer
  • Administrator
  • *****
  • Posts: 34019
    • View Profile
Chop saw metal blades
« on: July 06, 2015, 10:03:40 AM »
I finally wore out the carbide tip, a 72 tooth blade that came on the metal saw I purchased a year+ ago. Yep, blade won't go any further, just sits there and heats up.

So I had to order another blade.

WHOA

These things are not cheap...not inexpensive either! And besides that, they cost a lot of $$$$

I settled on a new 80 tooth blade for around $75, but most of the blades ran from $100-$145.

I would say, that is OK. I never had to inhale that nauseous dust from the disintegrating fiber wheels. The metal blade always stays the same diameter.
The metal blade makes great, more precise, square cuts, and I like the color of the blade better than that dirt brown junk on the cotton blades.

So there you have it, some unimportant news that doesn't matter one iota to anyone!
Site owner    Isaiah 6:8, Psalm 91 
NSDQ      Author of the books: Distant Thunder and Thoren

Offline EL TATE

  • Registered
  • **
  • Posts: 3180
    • View Profile
Re: Chop saw metal blades
« Reply #1 on: July 06, 2015, 10:22:02 AM »
Other than those that have breathed, worn, and otherwise assimilated the noxious brown dusty grime from those other blades ::)
Husband, Father, Gear guy, Patriot.

Offline Wilbur

  • Registered
  • **
  • Posts: 1538
    • View Profile
Re: Chop saw metal blades
« Reply #2 on: July 06, 2015, 10:32:28 AM »
This is very helpful thanks.....do they make metal cutting blades that can be resharpened or are they all carbide tippedal blades that have to be tossed when the carbide tips wear out?

Offline Flyin6

  • Head cook and bottle washer
  • Administrator
  • *****
  • Posts: 34019
    • View Profile
Re: Chop saw metal blades
« Reply #3 on: July 06, 2015, 11:34:40 AM »
This is very helpful thanks.....do they make metal cutting blades that can be resharpened or are they all carbide tippedal blades that have to be tossed when the carbide tips wear out?
They are carbide tipped
Don't know about sharpening
Site owner    Isaiah 6:8, Psalm 91 
NSDQ      Author of the books: Distant Thunder and Thoren

Offline KensAuto

  • Global Moderator
  • ****
  • Posts: 7684
  • My abuser is named Nate
    • View Profile
Re: Chop saw metal blades
« Reply #4 on: July 06, 2015, 11:58:58 AM »
To use a metal blade, don't you need a specific saw, one that spins slower? Or can you put those blades on an old school saw? I've often thought about that.
Underpaid and misunderstood since 2014

Offline EL TATE

  • Registered
  • **
  • Posts: 3180
    • View Profile
Re: Chop saw metal blades
« Reply #5 on: July 06, 2015, 01:47:55 PM »
I think the spark shower and slag would be enough to mess up your avg dewalt pretty badly. Not saying it couldn't be done but last summer I was working for a stage lighting company and building shipping crates with steel banding. Cut over 4 tons of steel with the composite blades and whoa are they messy. had to occasionally hammer and chisel the slag off the saw base.
Husband, Father, Gear guy, Patriot.

Offline Flyin6

  • Head cook and bottle washer
  • Administrator
  • *****
  • Posts: 34019
    • View Profile
Re: Chop saw metal blades
« Reply #6 on: July 06, 2015, 01:48:45 PM »
To use a metal blade, don't you need a specific saw, one that spins slower? Or can you put those blades on an old school saw? I've often thought about that.
Korrekt Ken!

Metal saw spins at 1800RPM. Doesn't the dirt impregnated, cotton wheel one turn at 3600 or something like that?

They did that so they could charge twice the amount for this metal saw. Costs around $450 to get in the game.
Site owner    Isaiah 6:8, Psalm 91 
NSDQ      Author of the books: Distant Thunder and Thoren

Offline Flyin6

  • Head cook and bottle washer
  • Administrator
  • *****
  • Posts: 34019
    • View Profile
Re: Chop saw metal blades
« Reply #7 on: July 06, 2015, 01:50:21 PM »
I think the spark shower and slag would be enough to mess up your avg dewalt pretty badly. Not saying it couldn't be done but last summer I was working for a stage lighting company and building shipping crates with steel banding. Cut over 4 tons of steel with the composite blades and whoa are they messy. had to occasionally hammer and chisel the slag off the saw base.
These carbide blades don't throw slag or really many sparks. Just really hot little daggers or splinters that pierce your skin everywhere they touch . Good news is they immediately cauterize the wound!
Site owner    Isaiah 6:8, Psalm 91 
NSDQ      Author of the books: Distant Thunder and Thoren

Offline Sammconn

  • Just A Guy in the Sticks
  • Registered
  • **
  • Posts: 3894
    • View Profile
Re: Chop saw metal blades
« Reply #8 on: July 06, 2015, 10:41:13 PM »
Sheesh. That is not cheap.
But the trade off of the dust dirt etc. is probably worth it.
Not to mention all of the benefits you mentioned.
I just don't want to wind up missing a digit or limb.  I can sometimes get in a hurry to get results.
Sam

Offline Flyin6

  • Head cook and bottle washer
  • Administrator
  • *****
  • Posts: 34019
    • View Profile
Re: Chop saw metal blades
« Reply #9 on: July 07, 2015, 09:40:43 AM »
Sheesh. That is not cheap.
But the trade off of the dust dirt etc. is probably worth it.
Not to mention all of the benefits you mentioned.
Not having that dust is in my view the best thing about this saw. But having neat/fast cuts makes the jobs more precise to start with.

These machines are more dangerous though. The blades pull on the material and the motor may be more powerful, so caution is advised
Site owner    Isaiah 6:8, Psalm 91 
NSDQ      Author of the books: Distant Thunder and Thoren

Offline JR

  • Global Moderator
  • ****
  • Posts: 13537
    • View Profile
Re: Chop saw metal blades
« Reply #10 on: July 08, 2015, 12:36:13 PM »
I will keep my little band saw. Does 6 inch, not real fast but doubles as an upright saw for little cuts. Blades are $20
Retired LEO  Lifetime NRA+  Outcast in Calif

"The tree of liberty must be refreshed from time to time with the blood of patriots and tyrants"

Thomas Jefferson

Offline Flyin6

  • Head cook and bottle washer
  • Administrator
  • *****
  • Posts: 34019
    • View Profile
Re: Chop saw metal blades
« Reply #11 on: July 08, 2015, 10:10:59 PM »
I got that new 80 tooth blade in and installed today

Holy smokes

It cuts steel like butter. I mean it's going through this stuff I'm using in just seconds with almost no downward pressure

I love it

Pics tomorrow when I download the camera
Site owner    Isaiah 6:8, Psalm 91 
NSDQ      Author of the books: Distant Thunder and Thoren

Offline Sammconn

  • Just A Guy in the Sticks
  • Registered
  • **
  • Posts: 3894
    • View Profile
Re: Chop saw metal blades
« Reply #12 on: July 08, 2015, 10:59:23 PM »
I got that new 80 tooth blade in and installed today

Holy smokes

It cuts steel like butter. I mean it's going through this stuff I'm using in just seconds with almost no downward pressure

I love it

Pics tomorrow when I download the camera
I do not have a metal one yet, but find I run my wood blades far too long as well. Read - I don't change them until I have to burn through the boards.
Put on the new blade and think why did I wait so long.
I just don't want to wind up missing a digit or limb.  I can sometimes get in a hurry to get results.
Sam

Offline Dawg25385

  • Registered
  • **
  • Posts: 2064
    • View Profile
Re: Chop saw metal blades
« Reply #13 on: July 08, 2015, 11:07:25 PM »
I got that new 80 tooth blade in and installed today

Holy smokes

It cuts steel like butter. I mean it's going through this stuff I'm using in just seconds with almost no downward pressure

I love it

Pics tomorrow when I download the camera
I do not have a metal one yet, but find I run my wood blades far too long as well. Read - I don't change them until I have to burn through the boards.
Put on the new blade and think why did I wait so long.

Ha! I just replaced the blade on my miter saw and thought the same thing...
2006 Chevrolet 2500 HD 6.6 - MotorOps EFI, 4" MBRP, S&B intake, AirBags and B&W Turnover Ball
Prov 27:17, 2 Tim 1:7
NRA Life Member

Offline Flyin6

  • Head cook and bottle washer
  • Administrator
  • *****
  • Posts: 34019
    • View Profile
Re: Chop saw metal blades
« Reply #14 on: July 09, 2015, 08:30:44 PM »
Here's the old 66 tooth blade that has cut part of the earth apart over the past year,

And the new 80 tooth blade
Site owner    Isaiah 6:8, Psalm 91 
NSDQ      Author of the books: Distant Thunder and Thoren

 

SimplePortal 2.3.6 © 2008-2014, SimplePortal