0 Members and 46 Guests are viewing this topic.
No problem for the driveway, front is over dirt and it has gutters.Like Meguiers, use the plastic polish all the time. In fact just did my driving lights.Installed new SNGL LED headlights today. Supposed to be 2-3x brighter than my JDMs. Only issue was the Oring had to swapped and they adjust with a little allen wrench to be dead on straight. Kinda a pain really but look good so far.
I just don't want to wind up missing a digit or limb. I can sometimes get in a hurry to get results.
Since I have had some “extra time” I started polishing the traverse so it’s in clean looking condition. Not that it increases the value. It’s amazing what a 3000 grit pad and water does for simplifying this process. As long as you have a good micro pad to buff the clear finish back up your golden. Takes a lot of the factory orange peel texture out Anyone interested in me starting a detail thread? Sent from my iPhone using Tapatalk
Nate, how big is your exercise room? I’m planning to build one about 10x16 in the garage and wanted to see how big yours is for perspective. Sent from my iPhone using Tapatalk
Quote from: dave945 on December 18, 2020, 04:20:39 PMNate, how big is your exercise room? I’m planning to build one about 10x16 in the garage and wanted to see how big yours is for perspective. Sent from my iPhone using Tapatalk13' 6" x 14' 8"Before you build one in the garage, find whatever rubber flooring your going to use and build it to that size so you dont have to cut the flooring to match.
Quote from: Nate on December 18, 2020, 04:46:23 PMQuote from: dave945 on December 18, 2020, 04:20:39 PMNate, how big is your exercise room? I’m planning to build one about 10x16 in the garage and wanted to see how big yours is for perspective. Sent from my iPhone using Tapatalk13' 6" x 14' 8"Before you build one in the garage, find whatever rubber flooring your going to use and build it to that size so you dont have to cut the flooring to match.Didn’t think of that about the flooring, thanks for the tip. I can build it whatever size I need, the garage is only 6000 sqft, so I’m flexible. :)Sent from my iPhone using Tapatalk
Yeah I thought it was a U joint. Tate would laugh. I’ll be in 2wd on the way back. Should clear triple digits with no vibrationSent from my iPhone using Tapatalk
Quote from: dave945 on December 18, 2020, 07:18:18 PMQuote from: Nate on December 18, 2020, 04:46:23 PMQuote from: dave945 on December 18, 2020, 04:20:39 PMNate, how big is your exercise room? I’m planning to build one about 10x16 in the garage and wanted to see how big yours is for perspective. Sent from my iPhone using Tapatalk13' 6" x 14' 8"Before you build one in the garage, find whatever rubber flooring your going to use and build it to that size so you dont have to cut the flooring to match.Didn’t think of that about the flooring, thanks for the tip. I can build it whatever size I need, the garage is only 6000 sqft, so I’m flexible. :)Sent from my iPhone using TapatalkDave, just be prepared for the cost of the equipment right now. The supply system that was never designed for this massive demand is hanging on by a single thread. I have a line on a lot of equipment, most of it is up your way, so if you need some assistance i can help you out.
Quote from: Nate on December 18, 2020, 08:58:27 PMQuote from: dave945 on December 18, 2020, 07:18:18 PMQuote from: Nate on December 18, 2020, 04:46:23 PMQuote from: dave945 on December 18, 2020, 04:20:39 PMNate, how big is your exercise room? I’m planning to build one about 10x16 in the garage and wanted to see how big yours is for perspective. Sent from my iPhone using Tapatalk13' 6" x 14' 8"Before you build one in the garage, find whatever rubber flooring your going to use and build it to that size so you dont have to cut the flooring to match.Didn’t think of that about the flooring, thanks for the tip. I can build it whatever size I need, the garage is only 6000 sqft, so I’m flexible. :)Sent from my iPhone using TapatalkDave, just be prepared for the cost of the equipment right now. The supply system that was never designed for this massive demand is hanging on by a single thread. I have a line on a lot of equipment, most of it is up your way, so if you need some assistance i can help you out.I’ve got some of what I need for now, need to pick up a new treadmill, a mouse took a sauna on the Control board of the old one and treated me to a whiff of burnt ozone. Besides that I just need a bench and possibly an elliptical so one person can do treadmill and the other can do elliptical. I’ve got enough free weights to last me until the burgeoning market turns into a glut of used gear and I can pick it up at a better price. Sent from my iPhone using Tapatalk
Picked this rack up for $100. Just like everything else exercise related....people are jacking the price up 3-4 times the retail price. People are even trying to get above retail for some really beat up equipment...
Howdy Jon. Been a long time since I’ve been to Pigeon Forge. My wife and I were dating back then. Is it still very commercialized?Sent from my iPad using Tapatalk
Quote from: TexasRedNeck on December 22, 2020, 07:34:19 AMHowdy Jon. Been a long time since I’ve been to Pigeon Forge. My wife and I were dating back then. Is it still very commercialized?Sent from my iPad using TapatalkWhat is pigeon forge? Sent from my iPhone using Tapatalk
Actually it’s named for a 19th century iron forge next to the little pigeon River- signed Cliff ClavinSent from my iPhone using Tapatalk
FRAGILE.....it must be italian
Quote from: TexasRedNeck on December 22, 2020, 08:02:53 PMActually it’s named for a 19th century iron forge next to the little pigeon River- signed Cliff ClavinSent from my iPhone using TapatalkI laughed out loud at this.....My estranged in-laws live in Sevierville just north of Pigeon Forge & Gatlinburg.
Well it’s brisk this morning. I’m off for Christmas and have been since Friday last. But in to cook the crew steak and eggs for the last work day before Christmas. We only work a “half” day today and we always do a breakfast for the guys. Oh yeah. The brisk part...Sent from my iPhone using Tapatalk
Quote from: Sammconn on December 24, 2020, 08:40:13 AMWell it’s brisk this morning. I’m off for Christmas and have been since Friday last. But in to cook the crew steak and eggs for the last work day before Christmas. We only work a “half” day today and we always do a breakfast for the guys. Oh yeah. The brisk part...Sent from my iPhone using TapatalkMan 39 ain’t so bad. It was 34 here this morning .....Sent from my iPhone using Tapatalk
Quote from: TexasRedNeck on December 24, 2020, 10:26:21 AMQuote from: Sammconn on December 24, 2020, 08:40:13 AMWell it’s brisk this morning. I’m off for Christmas and have been since Friday last. But in to cook the crew steak and eggs for the last work day before Christmas. We only work a “half” day today and we always do a breakfast for the guys. Oh yeah. The brisk part...Sent from my iPhone using TapatalkMan 39 ain’t so bad. It was 34 here this morning .....Sent from my iPhone using TapatalkThats (negative/below zero) -39....
I hate to sound like a broken record, but that eskimo guy really needs an updated evaluation. ;)
I was going to ask C or F but happens that -39 is -39 I’m either language Sent from my iPhone using Tapatalk
We just hung out at the cabin today. Turned out to be a White Christmas here after all. First Pic is our road out. Second is from the back deck. Sent from my LM-Q730 using Tapatalk