0 Members and 93 Guests are viewing this topic.
So, Bobby...being the calculating trained warrior NCO that you are. Take the appropriate action, Execute!
your standard grunt level CQB is just putting rounds and rounds on scary stuff till it stops scaring you!
Signed up for the annual 20mi ruck, then signed up for a 5K.
Quote from: Farmer Jon on June 28, 2019, 07:53:15 AMQuote from: JR on June 28, 2019, 01:09:37 AMHey Jon, any of those have the weight dist mount on the tongues still? I got a hitch and bars cheap, but no mount for the tongue.I think there might be. I will have to look next time Im at my partners place. He might have some laying around. DO you need the one with the chains?Please!! Trailer is drilled for them too. I just have the arms and hitch.
Quote from: JR on June 28, 2019, 01:09:37 AMHey Jon, any of those have the weight dist mount on the tongues still? I got a hitch and bars cheap, but no mount for the tongue.I think there might be. I will have to look next time Im at my partners place. He might have some laying around. DO you need the one with the chains?
Hey Jon, any of those have the weight dist mount on the tongues still? I got a hitch and bars cheap, but no mount for the tongue.
Quote from: BobbyB on July 01, 2019, 09:02:07 PMSigned up for the annual 20mi ruck, then signed up for a 5K.Any more info? Which 20mi?
Quote from: wyorunner on July 01, 2019, 10:52:00 PMQuote from: BobbyB on July 01, 2019, 09:02:07 PMSigned up for the annual 20mi ruck, then signed up for a 5K.Any more info? Which 20mi?Not a run, a 20mi ruck with the charity that I support. I can PM you the page if you'd like.
Well, As usual, I think I don't have all the stuff I need to finish the project. I measured backlash best I could, and I continually get about 5 thou although that seems tight per the specs on line. But all the stuff in there looks good and it has 180+k miles on it.I need a thread chaser for the bolts and holes in the ring gear to get all the threadlocker out and I need to dig out my bearing install cups and see if I have the right sizeaaaannnnd my jack on the 20t HF press is busted....
No. Red locktite. 175ftlbIf I’d have needed them I suppose Tate would have sold them to me Sent from my iPhone using Tapatalk
I have a recipe for that....jus sayinSo today I did some drivers ed and then painted and installed the railing in the casita and adjusted the sliding shower door so it would stay closed easier.And now I’m about to go out and get started on a long overdue project to install that Grizzly locker in the Bus....
Well, I guess it’ll work or be a big grenade that I’ll have to do all over again.Sent from my iPad using Tapatalk
Quote from: TexasRedNeck on July 04, 2019, 08:23:47 AMI have a recipe for that....jus sayinSo today I did some drivers ed and then painted and installed the railing in the casita and adjusted the sliding shower door so it would stay closed easier.And now I’m about to go out and get started on a long overdue project to install that Grizzly locker in the Bus....Don't forget the grizzly grease!
Dude, that was fast!I was messing with mine for days...Good work!
We did the Disney world experience once when girls were little. It was a few days added onto our annual HHI trip. DW was stressful and not that much fun imo, I refused to ever do it again.....
Replacing the electric door lock in the camry. I need another joint and smaller hands. Down to the last clip where I need 3 hands.
I just don't want to wind up missing a digit or limb. I can sometimes get in a hurry to get results.
Not sure how smoking a fatty will make your hands smaller. Has the earthquake situation improved for ya?Or did it miss you?
Quote from: Sammconn on July 08, 2019, 07:08:17 PMNot sure how smoking a fatty will make your hands smaller. Has the earthquake situation improved for ya?Or did it miss you?LOL.Not only makes his hands smaller, but makes quakes seem non-existent!
Freaking hippy. Bolts will be fine.