REAL MAN TRUCKWORKS & SURVIVAL
PERSONAL READINESS => Hide Site => Topic started by: TexasRedNeck on August 08, 2015, 11:06:28 PM
-
I'm starting this thread to document my decision process and progress towards my BOL and retirement site.
Now I know we will all have differing opinions on the opsec aspects probability and execution. This is just my thoughts. I strive for a balance between probability and usability.
I first sat down and developed a plan that I call concentric circles based on likelihood and scenarios.
The circles represent scenarios in order of likelihood and I have executed in order of probability.
Bug In ( most likely, highest probability) 2-4 weeks in duration.
Hurricane preparedness
Minor civil unrest
Some contagions
Short term power outages
Short term bug out( next most likely). 4weeks to 1 year
Major contagion.
Major civil unrest
EMP
Long term bug out. (Things are never going back to normal)
Nuke
Major EMP
Total economic collapse
I'll come back and break it down in subsequent posts.
Sent from my iPhone using Tapatalk
-
I FREAKIN LOVE THIS!
-
Sure, another can of worms opens!!
Should be great,,,,,,,,,,,,,,,,
-
Well a little back story. My wife thought I was crazy, collecting weapons, ammo, hiring a professional weapons trainer to do 1:1 lessons each week. Every time I would try to explain, she would shut down.
Then one day, it happened. She watched a news special about EMP and the vulnerability of our grid. So I tossed her my copy of Lights Out and from then on it was a different conversation.
I tend to be very analytical and methodical in my approach so I sat down with her and we went through, for us, what we thought would be the most likely scenarios and built outward from there. Thus the concentric circles were born. That also gave us the ability to tackle things in an organized fashion. Why buy land in Idaho for the ultimate BOL, when you can't survive 4 weeks without electricity or water in the event of a natural disaster?
-
I am also reading this with interest. That said, I have my reservations as to how much one should invest both time and money in trying to prepare for the unknown.
-
I am also reading this with interest. That said, I have my reservations as to how much one should invest both time and money in trying to prepare for the unknown.
Not so unknown Koot
You know you gotta eat, drink, lay down, stay warm, personal hygiene, square dance and so forth. So you makey sure you have those things and you're mostly good. Beyond that it's a regional thing. Considering your excellent location, for you, bugging-in makes a coffee bean pile of sense.
-
That's why I enjoy reading other folks ideas/plans. It's different everywhere.... I just wonder if one can really prepare, or does one just need to change how they live? Work into life the common sense society has largely lost sight of? Either or, it's enjoyable thinking out loud.
-
So,back from the place and sore from hoisting metal pipe and beams as I add a lean to on the back of the shop. 30ft sticks are a booger to move and lift.
So Norm, my philosophy was that I needed a plan that balances risk and probability and is organized and methodical. Having lived through a few hurricane's and evacuations, I realized that civility is a very, very thin and weak veneer made worse by the just in time inventory delivery system. Remember when you were a kid and a local store had a "back room" with tons of produce and canned goods? Not any more. Very little inventory is available other than what is on the shelf. If something disrupts the delivery, we are going to be hurting.
I saw this first hand in the evacuation from Rita (the one that followed Katrina by a few weeks) Some people sat on the road 12 hours and never made it 100 miles. More people died in the evacuation than in the actual hurricane. Thousands upon thousands of cars were stranded on the side of the road as gasoline was no where to be had. I had a 2 year old and my wife was expecting our second. We had a place at the lake about 90 miles north and was fortunate to be able to get there in only 5 hours. People were losing their minds, running all over the median and shoulders, causing accidents and backing up traffic. Fights, gun play and other violence at the gas pumps was common.
When we got to our place we heard the storm had changed tracks and was headed right towards us. As we prepared to leave and estimated the ability to get gas, I remembered a little out of the way gas station off the main highway and went to check it out. It was closed but the VFD was there gassing up (they have keys) They said she only had about 200 gallons of premium left and opened at 7. I was in line at 5 am (#3 in line) with my old gasser truck. I filled the truck and my 35 gallon rolling gas can I used for my boat. By the time she opened there were 51 cars in line. Somewhere about car 10 they ran out.
We left for Arkansas and saw mayhem and madness everywhere. I noticed that cars were all out of gas, but rednecks in their diesel trucks were having no problem getting fuel. That's when it started for me. I realized how thin the veneer of civility was, and how vulnerable I felt with my wife, daughter and unborn all counting on me. I vowed I would never feel that way again.
I did make it to AR and we were fine, but I was never again going to be caught un prepared. Thus the concentric circles were born.
-
Circle One:
Short term bug in: Hurricane, minor civil unrest, minor contagion, short term power outage. (keep in mind not all things get put on the internet for the world to see, but the basics are here).
Have a plan: Put it in writing and share with your family. Practice quizzing each other on the scenarios and actions and contingencies
We had this little thing called tropical storm Allison several years ago before we had kids. It dumped 30 inches of rain in 2 days. Everything was under water. I had just flown back from Oakland and we landed about midnight. I took my chances in my truck and wound up sleeping on the freeway overpass since there was 4 ft of water over the roadway. Cell tower went down and my wife and I could not communicate.
Revelation #1, modern day communications fail in a disaster. In a terrorist attack the plan by the government is to shut down cell towers and internet. How you gonna call your wife to confirm plans, provide updates, or modify standing plans? Amateur radio is the key. I had a VHF/UHF antenna installed in the top of an 80ft pine in my front yard and got my HAM license. I installed a mobile system in the car that I drove to work every day. From anywhere within 35 miles I can hit my own antenna simplex ( radio to radio) without a repeater. Now no matter what, I can communicate with the family at home. I highly recommend making sure comms are one of the first things you consider in any planning.
Next was food and water. I started putting together a food plan that includes: dried and canned goods, MREs, Dehydrated, and even heirloom seeds. I obtained some new HPDE food grade barrels to keep filled with water. Use tap water,if you can. It comes from the treatment plant is has some chlorine in it already which helps it not grow stuff in it. I add a few drops of chlorine for good measure. Change the water out every 2 years.
The plan is to have food in the pantry that will last a month, a months supply of MREs with heaters and water stored on site. All other food stores are off site in the BOL.
Weapons and training are a necessity. Got a nice Glock or AR? How much professional instruction have you had from guys like Bobby, Nate, Don, Blaine or others that have "been there done that"? How much have you practiced? There is more to being armed than having a weapon and ammo. When I got my CHL as the provider and protector of my family I connected with an outfit of former Spec Op guys and found one of them that would also train 1:1 in addition to the group classes. I began putting 1000 rounds a month downrange from my G17 in private lessons I took every week after work for 2 years, based on my situation and selected scenarios.
Morale of the story: Our government spent millions training our soldiers to fight. Take advantage of your tax dollars at work and find a competent ex-Mil to train you how to fight.
Next was weapon selection and stockpiling:
We all argue for our favorite weapon and those that have read my blathering posts know I am a Glock fan boy. Get what you like and learn to shoot it often. I chose Glock. The originator. Simple. Few parts, standardized parts. Tough. Rugged. Dependable. One helluva weapon when you swap out the factory trigger for a Ghost Rocket 3.5 trigger and Trijicon night sights.
A little side track here (Am I DOTing my own thread??) If you believe in economic collapse as a possibility, then Gold comes to mind as a hedge. However, think about this: Guns never lose their value and only increase over time too. So does just about ANY durable good. Ammo, Weapons, tools, weapon mags, weapon parts. If you buy a bunch and never need them for 20 years, you'll have a nice little investment anyway when you divest them. And you can barter with them nicely in the event of a collapse. Not a lot of need for gold when you have no food and roving bands of thugs are out raping and killing (remember Katrina? Yeah like those guys)
So I wanted to standardize my weapons for multiple reasons. I and my family will all be shooting the same weapon system and thus familiarity and functionality and spare parts will be maximized. Here is what I chose to amass in quantity. ( I sill have the other odd weapons, like my Weatherby 460 mag, etc. but I ain't counting on that when trouble starts)
1. Glock 21 full size 45. I have several still in the tupperware in storage.
2. AR in 5.56. Again, several complete and in parts.
3. AK-47. Cheap and always goes bang. Ammo is cheap. Several in storage and also receiver flats and parts.
4. 12 ga Remington 870. Enough said, always works standard ammo. I have several in storage.
5. Glock 17, just for training and barter. 9mm is cheaper to shoot and since it functions like my other glocks my hands will never know when the time comes that I have something different in my hand. Again, a few in tupperware stored away
The rest are personal use weapons not in sufficient numbers to barter or stockpile.
6. 22LR pistol and rifle - suppressed. If things get nasty you'll want to harvest food quietly. And maybe a few other things quietly.
7. 308 bolt and semi auto AR
8 300 WM for when you really need to reach out and touch someone
Ammo. You can never have too much ammo. As a minimum I would keep 5000 rounds of each caliber as a baseline.
Weapon parts: Don't overlook springs, bolts, extractors, mags and mag springs etc. Stuff breaks and parts are always good for barter.
Cleaning supplies. Same as above.
So you need to decide how much ammo and weapons you keep in your primary residence, how many go to secondary or tertiary locations. I personally keep just what I need to potentially fight my way out. Ammo stored in primary residence is mainly in loaded mags and amounts to more than what military loads out with and I'll leave it at that.
Next is medical kit. Stuff happens. Keep a kit and again, get some first aid training. Short of open heart surgery, I have a pelican case with just about everything I'll every need. Sutures, meds, antiseptics, burn pads/gels, quick clot, israeli bandages, and epi pens, etc. I'll do a complete write up on my kit later.
Cash. I like to keep some funds on hand. If something goes down, then having a few weeks worth of cash is important. ATMs run on the internet and electricity.
Respirators/NBC: I acknowledge that I have a gap here. I will be closing this soon as the kids are of the age where I can get them to wear one effectively.
Tape and plastic: In the event of a nuke, or chem spill ( I am in Houston, the petrochemical capital) you may need to make a safe room, sealed off.
Back up power: I have a gas portable gen set for the primary residence. I plan to add a NG stand by.
-
^^^Good write up
Well thought out process, solid reasoning. He has standardized good stuff, and enough of it, AND he has practiced using it.
I wouldn't add anything to all of that
-
I interrupt my own thread for a question.
I'm considering some bulk fuel storage and not having any experience with large tanks, wondered if there was some advice for me when considering a used tank.
http://easttexas.craigslist.org/grd/5132567152.html
Other than filtering and making sure there is no water in the fuel, if a used tank has any rust on the inside due to previous water presence, is it junk or need to be remediated, or does presence of fuel and lack of water and oxygen essentially stop the rust and render it a filtering exercise only?
This is a pretty good deal on a 1000 gallon tank and he's negotiable.
-
Well, what I can offer is for above ground tanks the construction companies or a farm that is getting auctioned are good tanks usually.
As for keeping the fuel longer, one thing we sometimes do in the military that I don't see discussed often is remove the air from above the fuel and fill the tank with nitrogen.
The purpose is not to preserve the stuff, but rather to keep it from burning, since a fire needs oxygen. However a side bennie is the fact that bacteria has a harder time in nitrogen as does some types of algae.
So by my thinking if you take away all light, and all oxygen and don't expose it to higher temps you might achieve good long term storage of the stuff
Here's another plan. Store oil. Veggie oil, WVO, trans fluid, mixed with old diesel. Then when you need some, simply filter and refine it with your handy-dandy fuel maker (Available at Northern for $1450ish) and you now have fresh fuel. Waste oil ought to hang around much longer than refined diesel.
-
Interesting reading... as per the fuel issue I'd recommend a air of 250gal tanks if doing above ground, and a constant cycling use of the fuel. Fact is, modern diesel does not store well at all.
Fuel oil keeps better than Diesel, it's also not always an option with newer trucks as I am sure you know..just a FWIW thing. Another reason for a pair of fuel oil tanks. They have less "regulations" and appear much less of a target to fuel thieves. No one has to know what "grade" of fuel oil your storing.
I found your story regarding hurricane evacuation thoughtful. I am sure if I lived in such an area I'd have a disposable Diesel "something" to use as my evac rig. I think I would factor in a rack of Mt Bikes also, it seems the roads were well jammed. Something the news didn't offer, but I am curious, were the secondary roads a equal mess? I would think if they were, leaving earlier, travel light, is the best plan I could dream up. I have a friend who was living in New Orleans when that mess went down. He was one of the smarter ones and left very early in the game. His over cautious nature paid off....they never did move back, guess I don't blame him.
Your Amateur radio solution is something I feel more should consider. Especially if in larger urban areas. We use FM Business radios on the farm, and they are forever handy for just such situations.
Looking forward to more posts.....
-
I live about an hour north of New Orleans. During evacuations I stay clear of major highways and travel through the bushes on back roads. I have family a little ways north of me and that is where we go if evac is needed or just safer. I have traveled further during hurricanes with my horses in tow. Sitting on the highway with them in the trailer in 100 degree heat is not an option. I have found that traveling the 2 tracks is a more constant movement type of travel during these situations.
-
My friend who escaped NO with his family early on found traffic to start being a problem early on. His past life as a taxi driver had taught him all the alleys, interconnecting parking lots, and other such tricks to navigate across a city without relying strictly on established main roads. That most likely saved his family an immense amount of grief. I don't think all the $$$ in the world would put him back in a large city ever again.
-
BTW, I have bid on some 250-300 gal portable job site tanks for around $500 and didn't connect the dots on any of them
Starting @ $1000 and back tracking would make that a pretty good buy for the 1K tank pictured
-
Usually around here used fuel tanks go for about $.75 a gallon. But they are very common around here also. 1000 gallons is a lot to keep "fresh" We have given up trying to stay ahead of diesel anymore...I bought a small tanker truck for harvest and planting season, and we just use that. Today's newer diesels are so finicky that stuff my old Dodge would happily drink, will cause a new combine to sputter and complain constantly. So we like many others have resorted to keeping what we can burn in a month on hand and no more.
-
I would like to see more of this too. The tanks are pretty common around here, going for like 100 there so many of them.
Heck Koot, having a truck with enough for a month would be great. Something happens just hide it!!!
I need to get the family on board is my hardest part. I have most of the above. Buy a case of something here and there. A few cases of top ramen or beans will go a long way.
Regular masks (even childrens) and filters are easy, but new filters are pricey. I have enough for all with extra filters. Some are outdated, some are not.
I think a basic power system is something that should be covered besides generators. Solar and water power is free once obtained. I am not a big fan windmills.
For well under a $1000 you can setup a small system, keep you fridge cold and charge those batteries. I use solar for my batteries when camping, something like Don has in the back of SD. Plus think of all the batteries that will be sitting in fuel less autos, even yours. I don't like windmills, little output, to obvious. But they work at night like water.
-
You mentioned quietly harvesting food, have you considered bow hunting?
-
Thanks for the comments and suggestions. Don, it is interesting that you mention inert gas. I already keep an 80CF cylinder of nitrogen on hand. I thought of the same thing, Purge when full then pressurize slightly with nitrogen, say 5 psi with a relief valve. When near empty and time to refill, just open the system and then repressurize after filling. I'll have to dig out some old boyles law calculations and determine what pressure when 90% full would equal atmospheric pressure when empty. That would be ideal. ALong with some of the milspec treatment that should last a long time. Of course my tractor might just be very thirsty so rotating that stock every 6 months would not be a hard thing. I understand that well stored diesel can go 7-10 years.
When I get to the Second Circle things get a bit more interesting as evac routes, plans and equipment become much more debatable. I'm somewhere between circle 2 and circle 3 now and hope that in 5 years I'm fully realized.
As for the hurricane evac, yes every road was packed. MBs were not an option with a 7 month pregnant wife and a 2 year old. As the kids get older more options become possible. Which means you never have a static plan. Even without kids, as we age, our plans have to change. When you are 60, things you planned to be able to do when 30 are not likely so adjustments have to be made. When you have 4 million people trying to move, its gridlock. In Circle 2 I'll show some of the evac route maps and population density maps that helped guide some of my thought process. As well as a concept that the Mils amongs the group will recognize, natural lines of drift. Basically, if you are east of the Mississippi you are in a world of hurt as if you are withing 100 miles of the coast. More to come as I get my thoughts together and organized for consumption.
Pully, yep. I need to get a crossbow at a minimum.
JR, I may want to pick your brain as I get closer to alternate energy execution. I've read a bit about it but still studying. At first I want a grid tied system and get paid for spinning the meter backwards but would like to have the gear to transition to off grid if/when the time comes.
Thanks again, Keep the thoughts coming. I have a plan, but I've never considered it to be perfect. I have and will make adjustments as necessary and the collective intelligence from this group is helpful.
-
At first I want a grid tied system and get paid for spinning the meter backwards but would like to have the gear to transition to off grid
There's a guy up here who has a couple of the windmills. Bought one for something like $5,xxx, turned it on and around 6-8 months later he received enough money back from the power company to buy another.
-
On windmills: We have a windmill, as in a 1890's model LoL It pumps water very well, and I have the old stone grinding wheel attachment for it also, in case I am ever in the mood to sharpen a machete or something LoL
But my point being, sometimes the old ways work far simpler than new modern "concepts" That wind mill coupled to a 24V Alternator is a pretty darn quiet, cheap to run battery charger.
A flat belt and a old hit and miss engine can run a entire host of "attachments" and they run cheap and quiet. And they have an amazing duty cycle as well. This winter I will start a thread on the restoration of a few select old school means of living off grid that worked for generations and still do.
-
I was wondering who and when a hit-and-miss would be brought up.
-
im in for that norm
-
6. 22LR pistol and rifle - suppressed. If things get nasty you'll want to harvest food quietly. And maybe a few other things quietly.
Lots of great info there, but I am curious about this comment. I was always told suppressors are not legal to buy, has this changed or are there exceptions that I should review?
-
This is a really great thread! I really like your "concentric circles" perspective. I think all preps should done in a similar fashion- assigning probabilities of occurrence as well as the impact/cost if it does. As an example I don't think my house will burn down but the cost is too great for me if it does so fire insurance is a logical "must have" (not to mention my bank requiring it! ha). If you live in an area with blizzards that knock out power and suspend travel for a week or so on a routine basis then it makes sense to have a week's worth of food on hand at all times. And you go from there based on the risk/event and what can occur should it take place. Very thoughtful and forces you to think through the planning process.
On the issue of fuel storage has anyone used any of the fuel stabilizers (Sta-Bil or PRI-D)? I know for gasoline it makes a big difference in my mower etc. Don't have to run it empty which can lead to gaskets drying out, cracking etc. but the engine fires right up in the spring. I know these products will keep fuel for an extended period in better condition but cant seem to find how long their diesel products will "keep" fuel in good condition. But it might be easier than other ways of keeping the fuel good.
-
Back to the nitrogen unit
A thrifty guy might find one in the ex-military sales
We used them to actually catalytically create oxygen for breathing, at high altitudes
The thing was called OBOGS pronounced "O"- Bogs just like it appears.
Air was pumped into this chamber where it was separated into it's parts. O2 went to a tank where aviators used it to fend off the effects of last nights O-Club shenanigans, and the remaining stuff which was like 90% Nitrogen was pumped into the fuel cells.
-
I buy/use about 10K gallons of diesel a year on the farm. My experience is sometimes we get a batch that goes "sour" quickly...sometimes it seems to last much longer. I think the additive package you have in the fuel is the deciding point. Since most of what we buy is "red" off road fuel in most cases it's far better than the road fuels ya get at the truck stop. As for products... some work pretty well. Our fuel guy will come mix in some additives if the stuff starts to go bad, and it seems to solve the issue until we burn it. I have no actual product names or data, but next time I see him I will ask.
Of interest: I recently bought 250gal of fuel oil that was put in a tank in 1992. My Cummins loves it.
-
6. 22LR pistol and rifle - suppressed. If things get nasty you'll want to harvest food quietly. And maybe a few other things quietly.
Lots of great info there, but I am curious about this comment. I was always told suppressors are not legal to buy, has this changed or are there exceptions that I should review?
Yes they are legal to own and use. There are some steps to take to register and purchase/build them legally though. They require approval from the ATF after you send them $200 for the "tax stamp".
-
Most of us still have our rights. IL, not so much. (http://images.tapatalk-cdn.com/15/08/19/b763f7f9bcd980d1a28c41afd0be54d2.jpg)
Sent from my iPhone using Tapatalk
-
I'd love to see the write up on the hit or miss and other throw back ways of getting things done.
I figure I'll go though 1000 gal of fuel every 5 months. My little tractor is very thirsty for red fuel
Don, If I remember chemistry and physics from 30 years ago, to equal 1 atmosphere when nearly empty, I would have to pressurize to 132 psi at 90% full for a sealed system. Not sure that would be advisable so I'll need to look at a semi sealed system. I'll need to devise a system to supply N during the filling operation (draining the tank) A pressure regulator set to keep the tank at 3-5psi positive pressure. If I keep it out of the sun then the expansion and cooling should be kept to a minimum and thus usage of N from the tank. I'll need a pressure relief set at 10 psi and a regulator set to supply 5 psi so that its not a linear correlation between N usage and any fluctuation in temp/pressure......hmmm
-
There's that picture again. I'm not sure if I like it or hate it. That and the discussion that followed has cost me some money. Not only to run one on 22 pistols, but also to rig one of those M&P 40 I just bought to be capable also. Not sure what the results of that are yet. Still waiting on booster from liberty that's on back order. More importantly waiting on that stamp.
Moto,
As RN mentioned, some states do not allow them. Not legal advice from me, but check your local laws and visit with a lawyer that specializes in NFA trusts would be my first suggestion on this matter.
-
I'd love to see the write up on the hit or miss and other throw back ways of getting things done.
I figure I'll go though 1000 gal of fuel every 5 months. My little tractor is very thirsty for red fuel
Don, If I remember chemistry and physics from 30 years ago, to equal 1 atmosphere when nearly empty, I would have to pressurize to 132 psi at 90% full for a sealed system. Not sure that would be advisable so I'll need to look at a semi sealed system. I'll need to devise a system to supply N during the filling operation (draining the tank) A pressure regulator set to keep the tank at 3-5psi positive pressure. If I keep it out of the sun then the expansion and cooling should be kept to a minimum and thus usage of N from the tank. I'll need a pressure relief set at 10 psi and a regulator set to supply 5 psi so that its not a linear correlation between N usage and any fluctuation in temp/pressure......hmmm
Our fuel tanks were not pressurized. Actually they were vented.
Nitrogen is heavier than air so it just rests in there for the most part.
I think that OBOGS, however is an active system. While it is running you can breath and the fuel won't burn until it gets thrown into the noisy parts out back
Might be over thinking it
I still recommend, however store something more akin to oil, then refine it 60 gal at a time, what a home processer will make in a day.
-
hmm. A little google fu turned up this.
http://wasteoildiesel.com/
-
Run an old cummins, and you wouldn't have to "refine" it.
-
Run an old cummins, and you wouldn't have to "refine" it.
Or a Perkins marine engine like the one powering that HB generator
-
Circle 2
Here is where people’s thoughts tend to diverge. You will recall Cicle 1 is short term bug-in. The premis of Circle 2 is that you must leave your location for a while., up to a year. This means 2 things: You must have a place to go and you must have a way to assuredly get there. 2 controversial things in our preparations.
Not everyone will be able to have 2 or more residences and that may not be a requirement, but you will have to have a place to go and most likely will not be able to carry all the necessary supplies with you which means you will have to have staged supplies somewhere.
The three things we will cover in this Circle are: Site Selection, Method of egress, and supplies to stockpile.
SITE SELECTION
Everyone’s situation will be different so you must evaluate your location, your secondary location, your support group (if any) and your mode of transportation and avenue of egress. Remember that civility is veneer thin and you will now see it evalorate before your eyes. True depraved human nature will likely be the norm and you must prepare yourself for what that will look like. I want to paint a picture for you. Remember the name Reginald Denny? During the 1992 LA riots he was driving a concrete truck and got caught up in the rioting in a bad part of town. He was pulled from his truck and beaten severely and then one black thug ran up to him with a brick and bashed his head in. It was all caught on a helicopter news camera.
https://www.youtube.com/watch?v=UMP6bXnXdZM
People will justify in their own weak minds that any action they are taking is legitimate because they have “needs”. It doesn’t have to be the black inner city thug. It might very well be your penny loafer wearing neighbor who has been too busy buying the latest BMW to pay attention to this “crazy” notion of being prepared. When suddenly faced with the reality that he is failing his family as a father and husband because they are lacking any sustenance and his wife is berating him though she be complicit in the lack of preparations, he makes the desperate decision to pull out that one shotgun he has and use it to kill you and take everything you have worked hard to store up for your family. I guess the fable never envisioned the grasshopper pulling a gun on the ant….
This is but one thought process based on my location and situation. You may very well choose to cache supplies and weapons in an camping or remote area that is not well known and set up camp. You may form a pact with someone in a remote area that is like minded and work out a roles and responsibility arrangement to jointly prepare.
-
LINES OF DRIFT
The first thing I considered was a concept known as “lines of drift”. In only a few short days of a major event, the cities will be uninhabitable. Food will be gone, and roving gangs will have taken over. As that occurs people will flee, following a fairly predictable pattern of egress knows as lines of drift. Like a virus spreading, you will want to make sure that you are safely away from these lines of drift. If you live in or near a large metro area, consider that as people flee in their cars they will only be able to make it as far as a maximum distance of a tank of fuel. You need to be further than that away from the city or the mongrel hoard will run out of gas on your doorstep.
Look at your location and the population density. East of the Mississippi is not a place to be. The population density is very high. Same goes for the coast. 123 Million People or about 39% of the US population lives in counties bounding the coast line.. Estimates are that 80% of the population lives within 100 miles of the coast. Those people have their backs against the wall and will migrate inward. I won’t pretend to be an expert in your area, but here is what I considered.
Here is a population density map and a map of hurricane evacuation routes in Texas. Those major roadways will constitute the logical lines of drift. I wanted to be away from those areas and further than a tank of gas away from major cities. I compromised here a bit knowing that in an emergency the roads will be packed and a tank of gas will not equal Gallons x MPG at 55mph. This enabled me to justify buying a second home within a few hundred miles of my primary residence . I did however strictly adhere to the lines of drift requirement. Once I defined my area and requirements, the use of Google Earth helped me narrow properties down considerably and saved on needless driving and touring properties that did not meet my requirements. It still took 18 months of constant looking to find the right place. Be patient, have a list of requirements, a geographic target area and get actively looking.
I found a place that was outside of the convergence of major MSA lines of drift and adjacent to 10s of thousands of acres of National Forest in a very low population density area.. A 2 lane blacktop farm road is the closest access and the entrance to my location is very well hidden and I do not have a mailbox, nor is my property registered with the post office, which is how many search engines plot you on the map . When using Google to look up my address it actually plots about 6 miles up the road. Useful to know.
-
So I now have a second location that I believe will allow me to weather a year of civil collapse, and maybe more. I believe that a second location should not be large enough to draw attention, Modest is better for maintenance, upkeep and cost management. My place has HardiPlank and a metal roof and is extremely well insulated with a complete envelope of spray in closed cell foam. The energy needs are extremely small. I do not have a well as of yet, but it is on the planning agenda. I do have seasonal creeks and a decent sized pond.
Other things that we’ll consider later are: how not to draw attention to yourself and how to store bulk items securely, especially if you are not regularly at your secondary location
Up next: Transportation/evacuation plans. (method of egress)
-
attachments
-
more
-
better pop density map
-
Some links to maps and data you might find useful in your decisions.
https://www.census.gov/geo/maps-data/maps/thematic.html
-
Great info.
-
This will come into play later when we get to the third circle, but since we are looking at maps.
(http://www.eldoradocountyweather.com/climate/US%20Climate%20Maps/images/Lower%2048%20States/Precipitation/Mean%20Total%20Precipitation/Annual%20Mean%20Total%20Precipitation.png)
When you get to "things are never going to be the same", you have to be able to sustain yourself on naturally irrigated land. Rainfall plays a key role in that deicison
-
I feel better...Just discovered my farm lies in the least populated area of the Kentucky!
-
At or just under 1 person per square mile here. Life is good LoL
As for water....springs would be my advise, just saying.
-
There's that picture again. I'm not sure if I like it or hate it. That and the discussion that followed has cost me some money. Not only to run one on 22 pistols, but also to rig one of those M&P 40 I just bought to be capable also. Not sure what the results of that are yet. Still waiting on booster from liberty that's on back order. More importantly waiting on that stamp.
Moto,
As RN mentioned, some states do not allow them. Not legal advice from me, but check your local laws and visit with a lawyer that specializes in NFA trusts would be my first suggestion on this matter.
Thanks for the info. I've only talked to people located in IL, so it hadn't crossed my mind that it was a state issue and not a country wide issue. Stupid IL ... but at least it's legal to concealed carry now. They are making progress.
-
Little departure here. Built a dry stacked fire pit. About 6ft diameter
(http://images.tapatalk-cdn.com/15/10/17/15413e73335a6053cf03c3af371af357.jpg)
Sent from my iPhone using Tapatalk
-
Looks great. I'd guess the stone is local? Nice when there is plenty and consistent thickness.
-
It may be Mexican. So 500 miles max
You can see the massive pile o stuff I need to burn. 16 weeks and 1/4 inch of rain means burn ban.
Sent from my iPhone using Tapatalk
-
Qualifies for "Ring of Fire" playing while you wait for rain to actually start listening to the soothing crackle of a good burning campfire!
-
Nice pit! Looks like a postcard and a match would set that pile off
Sent from my iPhone using Tapatalk
-
Nice fire pit, before the fire department folks told me mine was not to code I had a rock one. Not flat but rock just the same. They told me the fire pit had to be either metal or concrete to meet forest service campground standards.
-
Even with the concrete apron around it they would not approve. So....now we have a concrete block with metal liner fire pit. Don't know if it will pass or not but it is what it is.
-
Ah, Man...I liked the rock one more!
-
Must be 'concrete or metal' because rock burns so easily. SMH.
I'm with Don, liked the rock better too.
-
Must be 'concrete or metal' because rock burns so easily. SMH.
I'm with Don, liked the rock better too.
We had the rock lined fire pit in place since the early 1970's, the new fire chief in the area for about a year. The whole area was sold off as RV lots in the late 60's, now there are almost as many homes as RV lots. The full timers don't like the recreation fires with the people sitting around having a good time. So now you either stop having fires or try to build the pits to the new standards and see what happens next.
-
Stupid me...I never knew rocks burned!
-
Why don't you re-stack the rocks around the new approved fire pit? That's just my opinion, as you now meet the standards they have for the fire pit. You can always add to standards, but can't subtract from them.
-
Why don't you re-stack the rocks around the new approved fire pit? That's just my opinion, as you now meet the standards they have for the fire pit. You can always add to standards, but can't subtract from them.
But you will still have the problem of those rocks catching fire! Duh!
-
See his sig that is a quote from you.
-
Why don't you re-stack the rocks around the new approved fire pit? That's just my opinion, as you now meet the standards they have for the fire pit. You can always add to standards, but can't subtract from them.
Wish I had thought about doing that before the rocks were hauled off and dumped into a canyon.
-
I am so glad we have not had that level of nonsense. I have a fire pit of all scrounged rocks on the edge of the pond. I burn everything (well almost) in it... every cardboard box that comes into the house goes there. I am sure my neighbors wonder some times when they see the glow from that edge of my property ha.
But I guess we have to have some redeeming factors here in MA given all the BS we put up with in gun laws, taxes and loonie liberals. Yeesh. Of course we do get lots of rain so it's not like we live under constant wildfire threat. But I fully expect some time to have someone ask me just WTH I'm doing. Last spring I burned off the ornamental grass out front and let me tell ya....that does not go quietly! It went from 0 to 30' flames in 0.002 seconds! Haha. My neighbor (who wasn't home at the time) asked me a week or so later what happened (I guess the 30x30 foot swath of black ash piqued his curiosity!) I explained the good that fire does in getting rid of bad bugs, molds, etc that can hurt the grasses. Good thing he (and others) didn't see the column of black smoke curling to the sky. Especially as I didn't have a hose anywhere near the damn thing when I lit the match!
Sorry for the DOT....firepits are the best way to relax and have good family fun (or guys swapping lies.....)
-
Hard day. Mowed and then cleared all the trails and downed trees. Picked bush beans from the garden and mulched with hay. Burned up a bunch of downed limbs and am now setting by the fire with my silent partner. Old No 7. (http://images.tapatalk-cdn.com/15/11/14/adff15519fc24dad5ba65f4263db1e87.jpg)
(http://images.tapatalk-cdn.com/15/11/14/7f340bf0deb65e611f88abf324da4364.jpg)
Sent from my iPhone using Tapatalk
-
Way to wind down after a full day
-
Yeah. It was 42 here this morning. And 69 for the high. It's wintertime in texas
Sent from my iPhone using Tapatalk
-
It was 40's here in the morn, then around 51 later on. I took the DR650 for a spin!
-
Dressed as the Stig, no doubt !
Sent from my iPhone using Tapatalk
-
It has rained here so much the past two days I couldn't have gotten an outside fire started.
-
Enough gasoline and you can get anything to burn.....
Sent from my iPad using Tapatalk
-
This ^^^^^
Sounds like a good days work.
-
Just read this thread trn, love the circles.
-
So I bought this cool propane weed burner/ torch to start fires, BBQs, burn weeds etc. totally awesome and no mushroom cloud from gasoline Ina pile of limbs.
Having trouble uploading photos will try again tomorrow
Sent from my iPhone using Tapatalk
-
Did you get the harbor freight one with the "hells inferno" lever?
Sent from my iPhone using Tapatalk
-
No I got it from Amazon. Purely manual. Valve near the body and a striker. Made in America by Red Devil
Sent from my iPad using Tapatalk
-
Looking forward to more updates. I like other have struggled with getting family on board. Even harder is dealing with this mixed family. I have responsibilities to my wife and children but two of my children will inevitably feel they have responsibilities to their other families. I can't think of leaving home with just my wife and two kids and abandoning the other two to the less prepared other parental units. I also have no desire to help the other units much further then they are willing to help with the preparation of worse case scenario
Raising boys into RealMen!!
-
TRN I have one of those torches and they are really great. Kill weeds really well....you don't even have to burn them up...just pass the heat over them and it bursts the cells and they die. Really great tool to have.
-
Looking forward to more updates. I like other have struggled with getting family on board. Even harder is dealing with this mixed family. I have responsibilities to my wife and children but two of my children will inevitably feel they have responsibilities to their other families. I can't think of leaving home with just my wife and two kids and abandoning the other two to the less prepared other parental units. I also have no desire to help the other units much further then they are willing to help with the preparation of worse case scenario
Raising boys into RealMen!!
You're reading too much into it
Here's what you do
Do what you need to do for your immediate family
Then pray earnestly, perhaps after fasting a time, that God would protect the extended family and provide for their safety. That should he bring them to you, that he would then provide what you need to do his work.
After that, it's faith. Either you believe that the Lord answers prayer or you don't!
(Hint: HE does!) :-))
-
I believe in faith and prayer. But also believe in faith after all I can do. James 2:14-26
I know all things are in gods hands but if I am to be prepared I want to be.
Raising boys into RealMen!!
-
So for a little mini update. To go with the fire pit I wanted to build a fire wood rack. This thing is massive. 2x4 heavy wall rectangular tubing. 10 ft long and 6 ft tall. Have to go into town tomorrow and get some 2 inch angle to make the braces for the roof. It will have a slanted metal roof to keep the wood dry. (http://images.tapatalk-cdn.com/15/12/29/39b4b3f716a5b13017f5227ece2146c7.jpg)
(http://images.tapatalk-cdn.com/15/12/29/4142dec22b8d8666ce3e8404012e5199.jpg)
(http://images.tapatalk-cdn.com/15/12/29/9b68b96db46d6174a06f744490234b21.jpg)
Sent from my iPhone using Tapatalk
-
That is going to hold a lot of wood!
-
That is one stout firewood rack...
Like the old Stihl commercial: "I'd say that firewood rack would last you forever, but that of course would be a lie.... You're not gonna live forever" ;D
-
Rofl. Yep. My grandkids will pass it on to their kids. Need to get some POR and then paint it too.
Sent from my iPhone using Tapatalk
-
Holy Tamale!
That is sturdy! Good welds too!
-
Well here it sits waiting on the R panel I ordered for the roof and a coat of POR
(http://a67.tinypic.com/2ziph1y.jpg)
Now I have to get after that big pile of oak logs and split it all up.
Sent from my iPhone using Tapatalk
-
Nice! Looks great.
Now I have to get after that big pile of oak logs and split it all up.
Do you use a maul or hydraulic? I got a Fiskars X27 splitting maul for Christmas, I'm itchin' to get out and see how it works.
-
Sure does look good. I just used a piece of corrugated to cover mine.
-
Kyle I'm doing it the old fashioned way. 4 way splitter wedge and a 10lb sledge then my 10lb maul from there. At least on the 20 inch diameter stuff. Otherwise just the maul. JR, that's what I was going to do but the wife unit wanted it green to match the roof on the house. SMH
Sent from my iPad using Tapatalk
-
Nice! Looks great.
Now I have to get after that big pile of oak logs and split it all up.
Do you use a maul or hydraulic? I got a Fiskars X27 splitting maul for Christmas, I'm itchin' to get out and see how it works.
That is the best manual splitting tool I have used. I am sure you will like it.
-
Sweet! I have the X27, X15 chopping axe, and the X7 hatchet and liked them... Have high hopes for the splitting mail too.
Sent from my iPhone using Tapatalk
-
heres a slight glimpse into nate's knowledge base. fiskars makes the best scissors used in sewing, as a matter of fact, I have a pair that is close to 20 years old right next to me and will still split a hair down the middle..............
-
You won't be disappointed I the splitting maul.
I own a collection of Fiskars equipment, and it's all good.
The X27 is a fine splitter. However, sometimes the four way wedge and maul are better.
On well seasoned wood it is the real deal.
-
Ok. Took a break from working on The Bus to make more progress on the firewood rack. My R panel came in and I had a piece of matching eave flashing left over from my shop addition so I used that in front. Primed and painted the top part so I wouldn't have to paint around the roofing later. Will empty it and paint the rest in a week or so.
(http://a67.tinypic.com/2aihm46.jpg)
(http://a66.tinypic.com/fxdn5d.jpg)
(http://a63.tinypic.com/2s5xyrq.jpg)
Sent from my iPhone using Tapatalk
-
You could at least smile for us TRN
Raising boys into RealMen!!
-
If it's not a frown or scowl, it's a smile......... ;)
-
It's that's expression when your wife insisted on getting you in the picture.
Sent from my iPhone using Tapatalk
-
Trn, you got a nice rack! :o
-
Yeah. My boobs used to be much firmer
Sent from my iPhone using Tapatalk
-
(http://images.tapatalk-cdn.com/16/01/17/cfa3e1af8a0ff790b4ba3b2def37e88f.jpg)
Nice finish to the day
Sent from my iPhone using Tapatalk
-
OK, so back on track. Is the firewood in the rack just for camp fires or is it also for heat in the home or shop? Kills me every time I see a firewood rack (yours and Ash's) in Texas and it doesn't even hold a cord. Envious as I used to run thru 4-5 cords per winter in NE Indiana.......
-
Just firewood. It really doesn't get that cold here. So far this season 27 is the lowest low. Shop heater might not be a bad idea though.
Sent from my iPhone using Tapatalk
-
Nice job and nice to have out of the way I bet.
Happy happy in the pic,,,,,,,,,, ::)
-
You could at least smile for us TRN
Raising boys into RealMen!!
"I am smilin'..."
-
OK, the Bus is back in the shop parked. It has the new exhuast and muffler in the back seat along with the caliper paint, water pump, a few Diode Dynamics, LED etc. Didn't get to work on it this weekend.
Was finshing the firewood rack and the garden.
POR is interesting stuff. You think with a name like Paint Over Rust, that it would just be brush it on....no. Clean and degrease with their cleaner. Then spray metal prep and keep wet for 20 minutes. Then rinse. Then paint. This stuff better be good.
It looks good. Several sags on the vertical, but its just a firewood rack.
Then it was harvesting all the carrots, beets, chard, and lettuce and spinach and finishing the enclosure with more wire fencing. Previously it was just 6 foot up the sides. Now completely wrapped over the top and sides. No critters getting into this one this summer. Added bracing in the middle, finished the electrical, and started on the second part of the irrigation system. Brought in about 6 FEL of mushroom compost and will till it in next week. Started my seeds indoors for now. Heirloom tomatoes, purple hull peas, squash, cucumbers, herbs, onions, peppers.
Long weekend. Good to be sore.
(http://a64.tinypic.com/29aprbm.jpg)
(http://a67.tinypic.com/2nkhs88.jpg)
-
Looking good Red!
-
Land, I will trade calif for land,,,,,,,,,,,,,,
Nice work
-
Finished tilling in the mushroom compost and finished my seedling sprinkler system. Wanted to water from above when starting seedlings and then switch to drip hose between rows once they are established. (http://uploads.tapatalk-cdn.com/20160221/a9a627856d5db157d81eeff45063ad1d.jpg)
Sent from my iPhone using Tapatalk
-
Any chance of hogs chewing thru that fencing?
-
Yeah there is a chance. It's not hog panel. If they become a problem I'll line the bottom 4 feet with a layer of hog panel
-
what, no cool night sight sniping?!
-
This means war. Two weekends in a row, I've come to the place to find my feeder down. That damn pig is making himself a pest. Last week it was knocked down, legs off and the lid off and drug out in the middle of the woods,empty.
I welded it up and got it all back set up and full of corn and last night, according to the camera, he knocks it down again. didnt get the lid off but a bunch spilled out.
I fixed the AR FTF issue with a buffer spring, the PVS14 is on and I'm going to stay up tonight. Its going to be me or him. I wish my buddies and their dogs were here, I'd hunt with dogs and stick him with a bowie up close and personal.
We ain't playin anymore. It's on like donkey kong
-
Good luck, glad you fixed the rifle.
-
Post video
Raising boys into RealMen!!
-
The man is going full in Rambo!
-
get some!
hopefully there will be a dressed and hung hog pic tomorrow!
-
Nothing last night Range time and kids being noisy must have driven him a little further into the woods. Regroup for tonight. In the mean time..... I can dream
http://www.youtube.com/watch?v=YG4AKnNKEi8&sns=em
Sent from my iPhone using Tapatalk
-
Ok. Welds up a new feeder stand. Solid steel pipe and cross bracing. 4 ft no 6 rebar stakes with brackets welded so I can bolt the legs to the stakes. He'll need a back hoe to turn this one over. Also weeded the garden a mulched with some hay. (http://uploads.tapatalk-cdn.com/20160518/6c5cd123aca8c7aaeca4966f5bb7daa7.jpg)(http://uploads.tapatalk-cdn.com/20160518/a4f76851903953bd4fe6ea228cdc567b.jpg)
Sent from my iPhone using Tapatalk
-
You mean to tell me you haven't killed butchered & ate him yet???? ;D
-
no not yet. Its just a matter of time. hes been very elusive. Confession of a tech saavy redneck....
I have a security camera on the feeder and I can lay in bed and watch it at night. Then I can open the living room window and use the end table as a shooting bench to wack him. just a matter of time.
-
no not yet. Its just a matter of time. hes been very elusive. Confession of a tech saavy redneck....
I have a security camera on the feeder and I can lay in bed and watch it at night. Then I can open the living room window and use the end table as a shooting bench to wack him. just a matter of time.
Yeah right.................!
well all be standing by for a report on how well that worked out for you with the BOSS...............! ;D ;D ;D
-
well got up here late today. Oldest had a sleep over and the youngest is with mamma at a dance convention.
Put in a pond aerator and today I wired up the timer for it. I'm only going to run it about 5 hours a day to keep the electrical use down and that should be plenty for the fish.
So with all that running around I didn't expect to see the hog tonight. I pulled all the game cams and they aren't taking pictures consistently. They should have had pictures of my running around on the tractor. I'll need to try batteries first.
So, settling in for evening I turned the security camera on and there the pig was.
I got the window open and set up for the shot. The Comp M2 on this AR is not exactly co-witnessed correctly with the PVS14 so the image is a little off. I popped him but he ran into the woods. I started in after him but decided that a wounded 250lb hog might be a formidable enemy in the dark in the dense woods. I'll go look for him in the morning.
-
That's an exciting night!
Sent from my SM-G920R4 using Tapatalk
-
hmm, sausage!!
Do a solar panel with battery on the pump. Run and charge during the day, let the battery run it at night. Fish are happy, no elec bill.
-
What does a solar panel cost? Could that actually pay back in a few years?
Sent from my SM-G920R4 using Tapatalk
-
Not a bad idea JR but this is a 1/2 HP motor driven aerator. Had I gone the compressor bubbler that would have been the ticket.
-
So went out this morning to look for the pig. He was in a hurry when he left so he was leaving some tracks. No blood trail I could see. Hmm I know I hit him because he jumped. Followed the tracks for a ways before they got mixed up in his routine trail which I lost at the creek. I wasn't planning on eating him anyway but I wanted to laugh in his face for knocking over my feeder twice.
-
Now I'm embarrassed.
Apparently I missed. I'm guessing my zero is off. It was only 125 yards.
(http://uploads.tapatalk-cdn.com/20160523/951a30976410bc71f486fc3a34dc24bd.jpg)
Sent from my iPhone using Tapatalk
-
He was back at 3 am
Sent from my iPhone using Tapatalk
-
Now you get to try again!
Sent from my SM-G920R4 using Tapatalk
-
You can get them for around $.50 a watt looking on CL, but $1 a watt is considered. Here in the bay area there are lots of dealers so deals are easy to find.
I have smaller panels (24x38) that are 100watt, but the ones on my house are 250 watt and are 30x63. I like mono panels as they put more in diff light, but not as much as poly panels which are better in on direct sunlight.
Most new panels are good for 25+ years so it is a long term payoff. My house system saved me around $1500 this year, but cost 18k. However I also got a 30% tax credit on that so real cost is 12k.
-
Them hogs are good freezer fillers. When we go to the lake, we like to hunt hogs from the boat..come to think of it, we should do that soon.
-
RN, grab a different tool from the safe and finish up.
-
Wonder if this would be a good enough excuse for a PVS22? A magnified image would be nice. Or maybe I'll just duct tape the pvs14 to the front of my 3-9 on my titanium hunting rifle.
-
I would say quit fartin around and just get you one of these!
https://en.wikipedia.org/wiki/AN/PVS-4
http://www.nitevis.com/ANPVS4_Weaponsight.htm
https://www.google.com/?gws_rd=ssl#q=AN%2FTVS-5+starlight+scope
-
I like the idea of a clip on.
Hmm, hunting from boats mean they can't chase you.
-
LoL We hunt from a boat because it's the only way to get to the area we shoot them at. Last one I killed was at 130 yards. 45.70 lever no optics. Full moon hunting...time your shot to the wave action...and down they go.
-
You need a claymore array under the feeder - click, click and you're BBQing!
-
You need a claymore array under the feeder - click, click and you're BBQing!
But the resulting backblast would destroy the feeder.
-
He was back at 3 am
Sent from my iPhone using Tapatalk
Sorry Tex, but that's funny right there.
-
Yes. I come here to also to admit failures, however big and funny....
Nate, I've only used GenIII tubes. How does the Gen II tubes compare? That's a lot cheaper than what I've been eyeballing
http://nvdepot.com/products/night-vision/nvd-bns-pvs-22-night-vision-weapon-sight/?v=7516fd43adaa
http://www.eurooptic.com/night-vision-depot-pvs-22-itt-gen-iii-64lp.aspx
-
You guys really like the top end stuff!!
I am looking more like this. Nice thing with a clip on is you can change weapons without loosing center and use with reflex or regular scopes.
http://www.opticsplanet.com/armasight-opmod-pvs-14-gen-3-alpha-night-vision-monocular.html
That is even a little pricey for me, I think gen 2 is just fine.
-
Wonder if this would be a good enough excuse for a PVS22? A magnified image would be nice. Or maybe I'll just duct tape the pvs14 to the front of my 3-9 on my titanium hunting rifle.
http://www.policestore.com/optics-laser-sights/scope-bases/rifle-bases/embedded-front-rail-mount-prod44615.aspx?avad=avant&aid=135323&cm_mmc=affiliate-_-Itwine-_-Avantlink-_-ale
-
Thanks Bobby. If I get a pvs22/27 I'll have to install that on one or more of the precision rifles. JR that's the set up I have now except it's the ITT Pinnacle GenIII
Part
One of problem is the mount I'm using. It's perfectly co witnessed with my Comp M4 set up on the SBR but the mount on the AR with the Comp M2 is a bit higher so it's hard to get a good picture through it.
Sent from my iPhone using Tapatalk
-
Thanks Bobby. If I get a pvs22/27 I'll have to install that on one or more of the precision rifles. JR that's the set up I have now except it's the ITT Pinnacle GenIII
Part
One of problem is the mount I'm using. It's perfectly co witnessed with my Comp M4 set up on the SBR but the mount on the AR with the Comp M2 is a bit higher so it's hard to get a good picture through it.
Sent from my iPhone using Tapatalk
Are you using the half moon spacer with the M2 or no?
-
Minot familiar with that Bobby. Break it down for me.
Sent from my iPhone using Tapatalk
-
Garden is going well. So much rain as made the squash a challenge.
Got this in the mail today.
(http://uploads.tapatalk-cdn.com/20160607/e94b39fa901ba8617f3c7370a73029ec.jpg)
Sent from my iPhone using Tapatalk
-
Minot familiar with that Bobby. Break it down for me.
Sent from my iPhone using Tapatalk
What mount are you using for your M2?
Are you saying your AP is slightly too high or is the NVG?
-
Will have to look this weekend. I bought it used with the mount. Yes, it sits about 1/4 inch high
-
Will have to look this weekend. I bought it used with the mount. Yes, it sits about 1/4 inch high
Is it a stock mount or did you throw it in a LT mount?
-
Some QD device of some kind. It was thrown on a back up weapon and not used much so I honestly don't remember much and cant lay my hands on it until this weekend
-
oh so you have CRS setting in.....................?!
-
Some QD device of some kind. It was thrown on a back up weapon and not used much so I honestly don't remember much and cant lay my hands on it until this weekend
Sounds good.
-
oh so you have CRS setting in.....................?!
Yup.
Sent from my iPad using Tapatalk
-
;D ...
-
So took the youngest out to test some snake loads in the S&W. First time firing a pistol ( I had my hands around her to help )
(http://uploads.tapatalk-cdn.com/20160906/d1e81f1f788795137988c8281c9b2d09.jpg)
Sent from my iPhone using Tapatalk
-
Nice!
-
I like your artistic side, and the handy snake identification tag for the head pilot on this forum.
-
...and the handy snake identification tag for the head pilot on this forum.
Speaking of snakes. I turned around on Saturday and realized I was being stared down by the largest garter snake I had ever seen. It was about 8 feet away hiding behind some landscaping. The thing was at least 5 feet long and nearly 2" wide at the thickest part. I had never seen them get that big before. Is that normal? Then further behind it was the tiniest baby snake I have seen. I know they are not poisonous, and optimistically I hope she takes care of some mice issues I currently have. So I left them alone.
-
...and the handy snake identification tag for the head pilot on this forum.
Speaking of snakes. I turned around on Saturday and realized I was being stared down by the largest garter snake I had ever seen. It was about 8 feet away hiding behind some landscaping. The thing was at least 5 feet long and nearly 2" wide at the thickest part. I had never seen them get that big before. Is that normal? Then further behind it was the tiniest baby snake I have seen. I know they are not poisonous, and optimistically I hope she takes care of some mice issues I currently have. So I left them alone.
I've seen them get sorta big. Seen some big pine snakes as well.
-
We had a 4'-5' (he didn't like us trying to get an accurate measurement) bull snake in our back yard this summer, he had to find a new home via my rake and a trash bag.......
Prior to me moving him word spread thru the neighborhood boys he was in our back yard. Caught a couple 8 year olds with a big plastic tub on my back deck........ lol
-
I hate snakes. Hard not to kill them all and err on the side of caution. They only ones I've ever been able to let live are the blue indigo snakes in Deep South Texas. They eat rattlesnakes.
Sent from my iPhone using Tapatalk
-
Fixed my favorite weapon system today!! I had almost given up on the Ruger MK22/45 that I completely disassembled to the last nut. I reassembled and could not get it to function. I finally figured out I installed the mainspring wrong and took all of 5 minutes to figure out and correct. Now my little mouse fart pistol is back in the game. (http://uploads.tapatalk-cdn.com/20160907/5e833a39bed7170310edf3da1dd4cff7.jpg)
Sent from my iPhone using Tapatalk
-
Nice, I've always wanted one of those with a can....
-
Around here the kids find a Rattler they usually just bash it on a rock LoL My personal favorite was one time Kay squared off with a rattler using the weed dragon. She lit half the mulch on fire in the rock garden, but man was it fun to watch.
So that little Ruger does look very interesting. I may have to build one of those for science. Nice to see kids learning... that's a solid life skill.
-
So today I finished reading "One Second After". Highly recommend that as a read. Brought some new perspective to contingency planning. Will be doing food inventory this weekend. Have to start getting a little more serious about meds. Will write more on that later. I have a solid supply of medical kits but meds are perishable. I'm good on weapons and ammo but need to focus on a few other things.
Sent from my iPhone using Tapatalk
-
I need to rotate some stock and inventory. What do you store your stock in? I found using cheap coolers work good.
-
Which stock JR?
Sent from my iPhone using Tapatalk
-
Canned food and water. You just reminded me is all.
-
Back to concentric circles concept. I have canned goods about 2-3 weeks. MREs for a month and then freeze dried and rice beans sugar salt for about 6 months. Only thing I need to start eating is the MREs. They'll go 7 plus in a cool environment and I've had them 5. All my stock is climate controlled. Water is in 35gal hdpe virgin barrels. I rotate water every 2 years.
Sent from my iPhone using Tapatalk
-
I'd like to buy a freeze dryer but $7k is a lot of jack
Sent from my iPhone using Tapatalk
-
I have 2-3 coolers full of FD and 6 or so cases of canned food. Water I just buy the 24-36 case and use the last one time to time. I also have lots of body wipes (less water wasted).
Don't leave out the dental and lots of TP!
-
Roger. I have those huge rolls of floss. Good supply of TP. I've been using doctor friends to obtain meds but they are so expensive I'm probably going the fish/animal route for basic antibiotics. Some of the more exotic stuff I need to just keep paying and tossing when it gets outdated. My lidocaine is good for another 3 years.
Sent from my iPhone using Tapatalk
-
TRN, my buddy was a Seabee in the early 80's & swears he ate mre's from Vietnam era. I'm sure some other guys can chime in but I think 7 years is a little short.
With that said I only have a couple cases of mre's & have been focusing on freeze dried buckets of food. We stock a months supply of drinking water not including water heater etc. beyond that we'll start hauling & filtering from local sources. Our canned & dry goods get rotated & I'm careful about what I buy & experation dates.
-
One thing I've learned from experience and a decent amount of research is food lasts SIGNIFICANTLY longer than expiry on the package. For our family that is just a cover your hind quarters thing for the money grubbers. I have eaten canned foods more than two years past the date, just fine no ill effects.
From a close friend who is a pharmacist, most meds last far longer than expiration. Now, at the same time there are certain meds that can become toxic when they expire working on a list to provide.
When storing water we also store filters, water purification tablets and bleach. While stored water should never need it, stored water can run out. The one gallon a day idea is strictly for drinking and cooking. In reality people use much more.
Freeze dried foods, we have found that single ingredients are better than meals, because then you can make meals your family likes.. check out thrivelife, I highly recommend their freeze dried products. Kind of expensive up front, but cost comparison is close to what you would get in a can from a store. The cool thing about thrive and single ingredient freeze dried product is that there is more nutrition in it than in "fresh" produce from the store.
How is that possible, you ask?
Well, fresh produce at the store is picked before ripe so it can ripen in route or be blasted with CO2 in order to finish ripening. While freeze dried produce is picked ripe. The two weeks to ripen on the plant increases nutrients.
The process thrive uses is this, picked ripe, flash frozen then trucked to their state of the art facility in Utah to be freeze dried where 98% of moisture is removed, then its canned and most of it has a 25 year shelf life unopened and up to two years once opened, depending on location humidity. I use thrive products in our every day meals atleast a few nights a week.
If your curious about the meats and cheeses, they are just as tasty as from a block a bag or fresh hamburger.
With freeze dried food, additional water needs to be taken into account for reconstituting it.
Rotating stock is important though. Always try to use a first in first out method, but if something expires it is up to you if you want to eat it.
Closing note, sorry it's so long and I sell thrive is why I know anything about it. If anyone was closer I'd cook you a meal entirely from storable foods and you'd never know!
-
Looks like we have a base for another thread. I think we all prep a little, but how much.
Rememeber you may not be able to go out and source for some time.
-
So I started laying the footings for my casita/storage building / reloading room. 7 inch thick with #4 rebar. 8 inch tube form. Gonna try every 12 ft on the long side and every 8 on the short. So 9 total footings each 4 sq ft. LVL beam 3 1/2 x 12. I know the beams will be strong enough. Wether the spacing on the long side is enough remains to be seen but I think the soil is solid enough.
(https://uploads.tapatalk-cdn.com/20170218/b02280f7480299e9b425b9bc694bb44f.jpg)
(https://uploads.tapatalk-cdn.com/20170218/19b7b505dfd5d52ded064bb3b2a432f6.jpg)
Sent from my iPhone using Tapatalk
-
That'l work.
-
(https://uploads.tapatalk-cdn.com/20170219/2aebe2641b7cc1df075648d6833c59f1.jpg)
Second footing
(https://uploads.tapatalk-cdn.com/20170219/821fcd0aba848a3e17401ac35b0295ba.jpg)
2 down 7 to go.
Sent from my iPhone using Tapatalk
-
Crazy, I always think in terms of depth of the frost line. Guess you ain't gotta worry about the ground freezing none......
-
Lol. Yeah. Low this year was 16 degrees and only for a few hours. It don't get cold here.
Sent from my iPhone using Tapatalk
-
Had to repair the sprinkler system/garden irrigation system. Although I drained it and blew it out with air, a little water remained on top of the valve and it split in the freeze. Installed two couplers this time. Next year I'll undo the couplers and remove the valve assembly all together and cover the exposed water stub.
(https://uploads.tapatalk-cdn.com/20170219/aea2d0d99221ccdfac32da45ae2b6b30.jpg)
Sent from my iPhone using Tapatalk
-
Today is target making day. Using what I had laying around. Some 6 ft T posts and weld on a mounting plate made of some purlin clips and some small targets and bolts. Wifey wants to shoot the G21 bedstand gun so I'm going to put up 4 of these targets and paint them different colors and call shots in colors. (https://uploads.tapatalk-cdn.com/20170314/d07aff9a8ae5e3c3c46aff114cd30b11.jpg)
(https://uploads.tapatalk-cdn.com/20170314/305893aeb666d40ca8e70c93238f8573.jpg)
(https://uploads.tapatalk-cdn.com/20170314/a428907dcc4c5a7e55385d1f5e13171c.jpg)
Ok I may shoot some too. Jus saying
Sent from my iPhone using Tapatalk
-
(https://uploads.tapatalk-cdn.com/20170314/6d367c723a2b2efdff3833d464f152f9.jpg)
(https://uploads.tapatalk-cdn.com/20170314/6877ea35ce0e49421246278a5b1d4c76.jpg)
(https://uploads.tapatalk-cdn.com/20170314/a11f621c899d1fa9b8168d94b492ff2a.jpg)
(https://uploads.tapatalk-cdn.com/20170314/1c28a90d217feda226cea999894a7625.jpg)
Gotta love the Craftsman range bag rofl
Got the 11 and 13 year olds on the Glock 17. The wife shot the 21. She was doing ok but after a few she was milking the trigger and off low and left just a bit. Kids did well with the g17 with me behind them for safety. Even with them limp wristing it would not FTF
Sent from my iPhone using Tapatalk
-
I think kids like guns better than Disneyland.
-
Some. I don't push it on them too much. As much as they want and then let them move on to something else. If I push them they'll never want to do it. I needed the practice. Drawing from concealed while moving was a bit of a challenge.
Sent from my iPhone using Tapatalk
-
Family range day, nice!
-
Nice! Looks like the targets did their job.
Funny, I have a DeWalt range bag. Lol.
And I have same ammo storage.
Bulk is beautiful. :beercheers:
-
Had to repair the sprinkler system/garden irrigation system. Although I drained it and blew it out with air, a little water remained on top of the valve and it split in the freeze. Installed two couplers this time. Next year I'll undo the couplers and remove the valve assembly all together and cover the exposed water stub.
(https://uploads.tapatalk-cdn.com/20170219/aea2d0d99221ccdfac32da45ae2b6b30.jpg)
Sent from my iPhone using Tapatalk
Unions on the sprinkler valves is the only way to go!
-
I have those on strategic lines for my pool pump.
-
Here is where the casita/ storage/ reloading and weapons room stands
(https://uploads.tapatalk-cdn.com/20170409/4eae6f37fe1613127a2bd765a64b6bad.jpg)
Sent from my iPhone using Tapatalk
-
And here's the little one sending some rounds down range. (https://uploads.tapatalk-cdn.com/20170410/f9c2603be39b558e29ba636a653e18ff.jpg)
Sent from my iPhone using Tapatalk
-
And here's the little one sending some rounds down range. (https://uploads.tapatalk-cdn.com/20170410/f9c2603be39b558e29ba636a653e18ff.jpg)
Sent from my iPhone using Tapatalk
Love it, have pics from when my girls started until now stashed away as well.
-
And here's the little one sending some rounds down range. (https://uploads.tapatalk-cdn.com/20170410/f9c2603be39b558e29ba636a653e18ff.jpg)
Sent from my iPhone using Tapatalk
Looks like a great spot to retreat out to and get away from the city. :beercheers:
-
Always love seeing kids shooting.
-
I love seeing that!
My boys shoot all the time since we bought that farm...
-
targets are about 75 yards on a rack. two 6 inch round gongs and two 3 inch gongs. She rings the 6 consistently. She was having trouble with the 3s and I noticed she was slapping the trigger pretty bad. Reinforced slow steady squeeze and gave her a single round. She banged out 3 in a row.
Then at 100 there is a steel popper. She hit that with no problem. Proud of her. Only about the 4th or 5th time she's shot and shes shooting subsonic 22lr with a 4x scope and a can.
Much better than when I was caught slapping the trigger......I had to carry the pimp cup and do pushups....
-
So trying to get caught up on this thread. Didn't like the way the beams sat on the concrete. Not as much bearing surface as I would like as I laid the supports out center to center and should have laid the corners out so that the distance was to the outside quadrant of the round column. So I went back and poured more concrete in a bigger diameter tube form. Used a bonding agent and extra Portland in the bag mix. So far so good. (https://uploads.tapatalk-cdn.com/20170722/3660944e73c35b42ffaa6b717f37f93f.jpg)
(https://uploads.tapatalk-cdn.com/20170722/ef089776f30a2b65d37777c8188bc83d.jpg)
Here the anchoring system. Since the beams are not treated but will contact cement I sat them on pieces of treated 2x4. Sheathing and siding will go all the way to the bottom of the beam so it will not be exposed. I also used super strength epoxy to set the allthread in the column
(https://uploads.tapatalk-cdn.com/20170722/4e9e277bb382380de63e8b2ffbc64ae9.jpg)
Sent from my iPhone using Tapatalk
-
About a month ago we had some of the hardest rains I've had here and it washed out a great deal of my driveway and overwhelmed the small culverts under the drive. The water comes from the front of the property and feeds down and enters the pond but the drive cuts across the low area and acts like a barrier which the water has to run along and then go under the drive through he culvert to the pond. So I ordered 36 tons of rip rap to line the side of the drive where the water runs. I also got a new 18 inch culvert and got to work. (https://uploads.tapatalk-cdn.com/20170722/779be4a725e3bc585ef04619dc20f331.jpg)
(https://uploads.tapatalk-cdn.com/20170722/293438a90d979ca827fa50df7f51cb37.jpg)
(https://uploads.tapatalk-cdn.com/20170722/0c7243fc56602df893aeb538c886eb9b.jpg)
Sent from my iPhone using Tapatalk
-
That will slow it down some. Water always seem to find a way to do,,,,,,,,,,,,,,,,,,,,,,
-
Now that I have the culvert I need to build some end walls/catch basin. So I got busy with the mixer and some wood
(https://uploads.tapatalk-cdn.com/20170722/edaa1fa4389eb18c1eafb6a200e7fa5c.jpg)
(https://uploads.tapatalk-cdn.com/20170722/0a6e81ec1c9bfc80992005084c7cd456.jpg)
(https://uploads.tapatalk-cdn.com/20170722/20d03b5ce934be92431de563f5b8c9c4.jpg)
Sent from my iPhone using Tapatalk
-
(https://uploads.tapatalk-cdn.com/20170722/ca6a71c6f8d451863bd3eab2da285ad7.jpg)
(https://uploads.tapatalk-cdn.com/20170722/9997f525efe3c5f0735fba47228c17a4.jpg)(https://uploads.tapatalk-cdn.com/20170722/1da5a803457df38039836f614dd3d402.jpg)
So got the basin unboxed and graded the soil and finished the rip rap on the uphil side of the drive
Sent from my iPhone using Tapatalk
-
And then I poured the base for the end wall on the other side and started the rip rap between the end wall and the pond. (https://uploads.tapatalk-cdn.com/20170722/4621cc64e4ba4db392154ed850fad0fe.jpg)
Sent from my iPhone using Tapatalk
-
Excellant work Charles. Looks like it should work well.
-
:likebutton:
-
Does look good. :likebutton:
-
Now get the garden hose and show us how it will work lol. Think you have enough volume?
Sent from my iPhone using Tapatalk
-
If you still have problems with the water moving too fast and cutting into the rock or driveway, you can add a few V shaped check dams to help slow it down. Just be sure to keep the height of the checks lower than the top half of swale and armored areas. Lots of work but better than fighting water problems when it is pouring out.
-
Tex. Looks good and a lot of work. How do you like your mixer? Is it electric? Are you going to put any grate on the input side?
Sent from my iPad using Tapatalk
-
So tex, is that your own redneck engineering or a lot of YouTube video watching? Looks really good.
-
Good looking work!
-
Mixer is HF 3 1/2 cu ft. On sale and with a coupon was less than$200. It barely mixes two 80 on bags. Perfect mix is one 80 and one 60. 3 1/2 is completely upright volume which is worthless as a measurement. So far so good. I've estimated that I have mixed about 3.5 yards of concrete total. And yes. My total red neck engineering. No YouTube. Got the inside form on the down hill side done today. Will take 20 bags of #80 to finish. The walls and base are 5 1/2 inch thick. It will give me 19ft between the culverts that will handle an H25 load.
Sent from my iPhone using Tapatalk
-
Ditto the "looks good" comments! Well done!
If this was a Big D project we'd see you hauling a batch plant in on a trailer and setting that up! Ha!
-
Ditto the "looks good" comments! Well done!
If this was a Big D project we'd see you hauling a batch plant in on a trailer and setting that up! Ha!
... :facepalm:
-
Mixer is HF 3 1/2 cu ft. On sale and with a coupon was less than$200. It barely mixes two 80 on bags. Perfect mix is one 80 and one 60. 3 1/2 is completely upright volume which is worthless as a measurement. So far so good. I've estimated that I have mixed about 3.5 yards of concrete total. And yes. My total red neck engineering. No YouTube. Got the inside form on the down hill side done today. Will take 20 bags of #80 to finish. The walls and base are 5 1/2 inch thick. It will give me 19ft between the culverts that will handle an H25 load.
Sent from my iPhone using Tapatalk
Thanks. I have some small concrete jobs I need to do and that sounds like it will do the trick. All of the Craigslist tow behind mixers have been worn out and still expensive.
Looking good. :popcorn:
-
Ok. Poured the final part of the downstream end wall. Bought a concrete vibrator which I should have bought a long time ago. $99 at HF. I had to take the form apart and wash all the mud out since we got a big rain since I poured the bottom. Forgot to put my cross braces between the sides back in. Put concrete in form and all was fine. Then as soon as I dropped the vibrator in the form blew out. Took 20 minutes to get it back in line and re install the braces. Used by bottle jack and a sledge. Still a little bowed but good enough. Bottom line is the vibrator works awesome. That concrete was mixed stiff and it just flowed as soon as I hit it with the vibrator. I wish I had it when I was pouring the footings for the casita. If you use a vibrator make sure your forms are solid. It puts much more pressure on your forms.
(https://uploads.tapatalk-cdn.com/20170728/5567fc8d47e47070f65d7c4b574517e6.jpg)
(https://uploads.tapatalk-cdn.com/20170728/fa50c04e3695f6328aa20203339899e0.jpg)
Sent from my iPhone using Tapatalk
-
And mowed my new patch of land (https://uploads.tapatalk-cdn.com/20170729/89cf31d13636dbb2daa2bacebf3fe586.jpg)
Sent from my iPhone using Tapatalk
-
Looks like a pretty good chunk , triangle or not.
-
Flat!
I don't quite understand the concept...Anything I know of as being flat has a house or corn on it!
-
LOL, yeah its only 1/2 acre but it squares up my property nicely at the road. And its the only cleared area around, so first order is to fence it. My fence runs along the tree line to the right. I'll take that down and move it out to the R.O.W. line which is 50ft from the center of the road. Then I'll start prepping it for a larger garden. Have to do 8ft fence around the garden for the deer. Probably also plant a few fruit trees. Gonna also run electric and water out there for irrigation.
-
In a previous post you said something about how it squares up your property at the road but the road cuts through... I'm having trouble picturing that. ;)
-
See if this helps.
(https://uploads.tapatalk-cdn.com/20170729/00c99fdd12c03d91f11cef544a2f776e.jpg)
The yellow piece is what I just bought
Sent from my iPad using Tapatalk
-
Took the forms off and graded around and put down more rip rap(https://uploads.tapatalk-cdn.com/20170729/af548e8e172821253df4f70b51ec982f.jpg)
(https://uploads.tapatalk-cdn.com/20170729/4c9bd36d4d89f23ec7f5265a092af5c6.jpg)
Sent from my iPad using Tapatalk
-
Bro,
That is some work to be proud of
I and, well, everyone else, I'm sure has noticed the absolute fine quality of your work RN! I see workmanship like this and I'm reenergized to pick up the pace farmside.
-
Ha. Don you hold your own my friend. It just takes me a whole lot longer with my dinky tractor
I'd get a lot more done if I was retired.
Sent from my iPhone using Tapatalk
-
Very nice, where are the pics of the broken equipment like in Big D's thread?
-
:-). No comment
Sent from my iPad using Tapatalk
-
Ha. Don you hold your own my friend. It just takes me a whole lot longer with my dinky tractor
I'd get a lot more done if I was retired.
Sent from my iPhone using Tapatalk
You say retired
My wife says retarded
I guess its the same thing???
Whatever it is, I'll take it!
-
Very nice, where are the pics of the broken equipment like in Big D's thread?
Nothing, well, not very much was broken the other weekend
Come on...That's at least one in a row!
-
TRN, that does complete the land nicely. Is there a house in that lot somewhere?
Time for a bigger tractor?
-
Yeah. House, shop and soon to be a guest house believe it or not.
Sent from my iPhone using Tapatalk
-
Ah ok that makes sense now :)
-
yesterday i got a lesson in fence building....thank you Youtube, Mother Earth News and other sites.
Put the post auger on the tractor and marked the fence line (50ft from center of the road) and put up a sting. Its difficult to get the hole exactly where you want it with an auger. Its more like getting it in the same zip code....and the auger will only effectively reach down 3 ft, when I need a 4 ft deep hole. enter the old fashioned post hole digger....and enter shoulder soreness this morning as a major slap in the face that I aint the boy I was in my teens that could rock a post hole digger for hours in the heat....So in go the posts and I used a 3/4 iron pipe with a cap on the end as my tamper for the backfill, adding a few inches at a time and tamping solidly. Posts are rock solid thanks to heavy clay soil.
In any event I now have the posts in the ground at each end for the classic H frame configuration. Next up will be to add the horizontal portion and start stringing wire. I think I will buy a T post popper to go with the fence stretcher so I can reuse the posts in the section of fence I am taking down.
Pics to come next week.
-
TRN I had to relocate some of my garden fence and I've always just fought getting fence posts out. Grabbed a t-post puller at Tractor Supply and darn that is slicker than snot. Wish I got one years ago. Best $25 or $30 I've spent in a long time. Have used it other places too when I need a little leverage applied just right.
And I'm with you on post hole augers....im happy if any part of the hole is within my original planned circle. It's like I'm a "boulder diviner" when I use those things. :rolleyes:
-
yesterday i got a lesson in fence building....thank you Youtube, Mother Earth News and other sites.
Put the post auger on the tractor and marked the fence line (50ft from center of the road) and put up a sting. Its difficult to get the hole exactly where you want it with an auger. Its more like getting it in the same zip code....and the auger will only effectively reach down 3 ft, when I need a 4 ft deep hole. enter the old fashioned post hole digger....and enter shoulder soreness this morning as a major slap in the face that I aint the boy I was in my teens that could rock a post hole digger for hours in the heat....So in go the posts and I used a 3/4 iron pipe with a cap on the end as my tamper for the backfill, adding a few inches at a time and tamping solidly. Posts are rock solid thanks to heavy clay soil.
In any event I now have the posts in the ground at each end for the classic H frame configuration. Next up will be to add the horizontal portion and start stringing wire. I think I will buy a T post popper to go with the fence stretcher so I can reuse the posts in the section of fence I am taking down.
Pics to come next week.
TRN, Here's the deal with three point augers
They use the weight of the thing to dig down, followed by the friction of the loose "dug" earth pushing against an advancing helix. So they meet a point of resistance of the hard pack vs the available downward force
Solution to all that?
If you have another tractor, you can push down on the auger and drill to hong-kong. Bigger tractors than our utility sized units have power down three points and they WILL do the trick. If you ever get to tractor next keep that in mind.
-
Thanks Don,
Getting it to bite is not the problem (in my clay soil with no rocks). If anything I have to remember to pull out every foot or so or it will screw all the way in to the heavy clay and shear a pin ( been there, done that). My issues is getting it located exactly where I want the hole and then because the arc of the arm, it never creates a perfectly vertical hole, its a slight angle so the bottom of a 3 1/2 ft hole the bottom can be off vertical by 5-6 inches.
I like accuracy....this auger is the equivalent of a 4 moa rifle. Good enough but not going to punch the same hole in the same location twice.....
-
Thanks Don,
Getting it to bite is not the problem (in my clay soil with no rocks). If anything I have to remember to pull out every foot or so or it will screw all the way in to the heavy clay and shear a pin ( been there, done that). My issues is getting it located exactly where I want the hole and then because the arc of the arm, it never creates a perfectly vertical hole, its a slight angle so the bottom of a 3 1/2 ft hole the bottom can be off vertical by 5-6 inches.
I like accuracy....this auger is the equivalent of a 4 moa rifle. Good enough but not going to punch the same hole in the same location twice.....
...
So true
-
I found that if you pre-dig a starter hole, a few inches down by hand, it keeps the auger from jumping around, then move the tractor forward about half way down to keep her straight(ish).
-
Good advice Ken. will give it a try
-
So today was a lesson in fence building. I have a new found respect for ranchers....
96 degrees and 106 heat index. No breeze. dismantling an existing fence and rolling up the wire and then stretching and splicing barbed wire and driving t posts.
Pics tomorrow. soreness and scratches from barbed wire and mesquite trees tonight....good thing my tetanus shot is good to 2018
-
Too bad I'm not closer, I'd be glad to help out with the fence. It's a royal butt whooping type workout! Wife and I did ours, only a small 4acres but was a great work out!
Sent from my iPhone using Tapatalk
-
I can honestly say...I'm glad I don't live closer!!
-
after stretching the last of the barbed wire and driving 2 more T posts, I have decided that I am going to rent a powered post driver. The soil is as hard as concrete and that manual driver is taking about 300 blows or more to get the post in the ground..
I contacted the rock yard and they are going to come give me an estimate on laying the rock on the 700ft of driveway.
Done for now with the fence until I get back from San Diego. I'm looking forward to relaxing in 78 degree weather and 68 degree water.....
We rented a house in Carlsbad/Oceanside area overlooking the beach and plan on relaxing and checking out the San Diego Zoo and a few other attractions
-
My old playground. Check out the wild animal park and all the military museums.
-
Have fun TRN. One of my favorite cities. If you can check the Del Coronado Hotel. They don't care if you walk around. I used to stay there when we did Beta work for Qualcomm. I would also be curious what you think of the Mexican food at Old Town Mexican Cafe where the ladies in front make the tortillas by hand. I thought it was good but I might have just been a tourista.
Sent from my iPad using Tapatalk
-
Mike, love the hotel Del. Stayed there before. Thought I was a navy seal until I tried running down the beach in the sand.....its harder than it looks and the water is cold.......
Tidbit. It is the largest stick framed building in the US. Built in by Chineese immigrant laborers.
-
TRN. It is definitely cool. I ran to the buffet.
Sent from my iPad using Tapatalk
-
Ok so here is an update. First: lesson learned. Never ever attempt to reuse old fencing. It's just not worth it. Fence materials are cheap compared to the labor. I was pulling posts after fighting all that barbed wire and finally said "forget this" and went and bought new t posts ($3.89 ea). Rented a rhino industries gas powered post driver which is worth every stinking penny. Insert post, place bottom on mark, tilt to vertical and pull the throttle trigger. Same with trying to reuse the clip wires that hold the wire to the post. Just get new.
Pics of finished fence to come.
Then I evacuated to the hide to escape Harvey.....more about that shortly.
Sent from my iPad using Tapatalk
-
So one of the reasons I have this place is for events just like Harvey. Living in the middle of 4M people presents a challenge to evacuate in the event of an emergency. In this case, knowing when to leave is the real key. You must have an early warning system and multiple routes. See my concentric circle philosophy. Keeping both trucks full is also a key. On the Bus I run 75 gallons and when the needle comes up off full, indicating that I've used 40 gallons, I fill. That means I never have less than 35 gallons. On the dually I always have the 60 gallon tank full and fill the main tank when it gets 1/2 full. That means I never have less than 75 gallons. I also keep at least a months worth of food at the hide in the freezer and pantry, not to mention a years worth of long term food. So the plan worked well. If I had to say there was a lesson to be learned it would be to have a bigger generator and more gas stored. I really need a mil surplus trailer mounted diesel gen set so I can power the entire house, either the Houston or the hide house.
Sent from my iPad using Tapatalk
-
So I'm on the schedule to have another 90 tons of granit brought in and my driveway re surfaced. I spent a month or more of weekends replacing a culvert and grading for drainage. While we didn't get torrential rains here it was steady light rain for 6 days. It required 4wd to get out and in and now my drive is very rutted. I attempted to drag out some material from up near the shops to mix with the clay mud and it helped with traction but still deep ruts. Did as much as I could in these wet conditions. So i moved on to the casita, attempting to get back on schedule. Installed Simpson joist hangers and hung 2x12 on 16" center. At 12 ft span that will carry plenty of load. I will say the best tool purchase in recent memory is my palm nailer to drive the short galvanized nails into the hangers. I now need to cut X braces for the joists before laying the 1 1/8" t&g plywood subfloor. (https://uploads.tapatalk-cdn.com/20170901/be96dbddd48c7ace5deb68af216866dd.jpg)
Sent from my iPad using Tapatalk
-
Looks good
Sent from my iPhone using Tapatalk
-
Looks good
Sent from my iPhone using Tapatalk
Ditto
-
Great looking work for a rain soaked Red-Neck!
-
The casita is looking good.
So one of the reasons I have this place is for events just like Harvey. Living in the middle of 4M people presents a challenge to evacuate in the event of an emergency. In this case, knowing when to leave is the real key. You must have an early warning system and multiple routes. See my concentric circle philosophy. Keeping both trucks full is also a key. On the Bus I run 75 gallons and when the needle comes up off full, indicating that I've used 40 gallons, I fill. That means I never have less than 35 gallons. On the dually I always have the 60 gallon tank full and fill the main tank when it gets 1/2 full. That means I never have less than 75 gallons. I also keep at least a months worth of food at the hide in the freezer and pantry, not to mention a years worth of long term food. So the plan worked well. If I had to say there was a lesson to be learned it would be to have a bigger generator and more gas stored. I really need a mil surplus trailer mounted diesel gen set so I can power the entire house, either the Houston or the hide house.
Some good stuff here....
I think the big key is getting out of Dodge early- from what I have read traffic tie-ups, accidents etc. is what killed a bunch of people when they evacuated late during Hurricane Rita evacuations.
I like the fuel aspect- always having enough available. Do you store any you could easily load in the truck should you need it?
Curious about the whole house generator....I like the idea of having one mounted in a trailer. Have you given a thought to fuel? Would you have fuel at both locations or carry that too? Also curious about whether diesel or LP would be a better choice. I like the storage aspect of LP for something like that (not likely to be used that often), but maybe the ability to use it in a vehicle also lends itself to diesel. But with the added "work" of rotating it.
I am really glad it all worked out for you and your family. When you see what others who did not have a plan have gone through/are going through you should be proud that for your family it was sort of a "vacation". Good for you TRN!
-
Wilbur. LP. What is that?
Sent from my iPhone using Tapatalk
-
LP, liquid propane.
Many gens are set up for that now, duo-fuel.
-
Natural gas was on the brain. Not liquid Propane
Sent from my iPhone using Tapatalk
-
The casita is looking good.
So one of the reasons I have this place is for events just like Harvey. Living in the middle of 4M people presents a challenge to evacuate in the event of an emergency. In this case, knowing when to leave is the real key. You must have an early warning system and multiple routes. See my concentric circle philosophy. Keeping both trucks full is also a key. On the Bus I run 75 gallons and when the needle comes up off full, indicating that I've used 40 gallons, I fill. That means I never have less than 35 gallons. On the dually I always have the 60 gallon tank full and fill the main tank when it gets 1/2 full. That means I never have less than 75 gallons. I also keep at least a months worth of food at the hide in the freezer and pantry, not to mention a years worth of long term food. So the plan worked well. If I had to say there was a lesson to be learned it would be to have a bigger generator and more gas stored. I really need a mil surplus trailer mounted diesel gen set so I can power the entire house, either the Houston or the hide house.
Some good stuff here....
I think the big key is getting out of Dodge early- from what I have read traffic tie-ups, accidents etc. is what killed a bunch of people when they evacuated late during Hurricane Rita evacuations.
I like the fuel aspect- always having enough available. Do you store any you could easily load in the truck should you need it?
Curious about the whole house generator....I like the idea of having one mounted in a trailer. Have you given a thought to fuel? Would you have fuel at both locations or carry that too? Also curious about whether diesel or LP would be a better choice. I like the storage aspect of LP for something like that (not likely to be used that often), but maybe the ability to use it in a vehicle also lends itself to diesel. But with the added "work" of rotating it.
I am really glad it all worked out for you and your family. When you see what others who did not have a plan have gone through/are going through you should be proud that for your family it was sort of a "vacation". Good for you TRN!
So I made a 4 wire cable with locking 20A plug for the ten and a 4 wire RV plug on the other end. Flip main breaker off and run generator in the shop and plug into the 50 amp 240 circuit in the shop to back feed the main panel.
The reason I want a mobile get set is to be portable and use it at either location. I've seen trailer mounted get sets in mil surp that have a large tank as part of the trailer. A good friend has two CUCV trucks with gen sets on them. One is a 6.5 GM diesel with pto driven 12kw gen set and the other is a dodge with a dual fuel gas and propane gen set. I may talk him out of the 6.5. It has a huge cargo box on back with the genet that would hold a massive aux tank. that would allow that truck to run for days at full output.
I could back feed the main panel in either house with a larger cable connection. 12KW would run most everything at the hide and a good part of the house in Houston.
As for fuel, I keep all my fuel on board the trucks (diesel anyway). I do have a few 55 gallon drums that I keep around for extra storage. I can easily plumb or siphon fuel from either or both trucks as needed. And having that fuel on board allows me to rotate stock and keep the fuel fresh. Between the two trucks I have 170gallons of diesel.
I don't really like the idea of having to maintain another vehicle, so I may look seriously at a trailer mounted gen set.
-
So today I pulled a few of the joist hangers to get the joists more level. Being anal for sure. Then cut my cross braces and got everything buttoned up. Hitachi nail gun works well. Next up is laying the tongue and groove subfloor. 1 1/8 plywood. Any advice on how to lay the t&g would be appreciated. I plan to glue and screw but getting the tongue fully seated in the groove is where my concern lies.
(https://uploads.tapatalk-cdn.com/20170910/1d0ec14c90d95c1c05935975492a3b90.jpg)
Sent from my iPhone using Tapatalk
-
I used a 2x4 screwed onto each piece and pipe clamps on mine. Screwed a 2x4 next to the one I was working on for the clamp.
Use LOTS of glue, it acts like a lube. Be sure the glue is for sub floors so it doesn't harden, no squeaks!
I would only use coated torx screws, the phillips strip way to easy. Started each screw with a hammer so the screwing was easier.
-
Thanks JR. I may have to sacrifice I sheet since I built this for 2 sheets by 6 sheets. And bout 12 total.
Sent from my iPhone using Tapatalk
-
Changed it a little once I found the pic. It was 10 years ago! :knucklehead:
-
Tex,
Try the Bowrench. Looks like slowes carries it now. I've used it for my deck boards and you will need a sacrificial board for the groove. Or a come along
-
Cool little tool. What are those things with cords on them?
https://youtu.be/oQwVUnTPC6I
-
Cheap old school 2" ratchet strap, one at each end with ratchet hung over outer edge of outside floor joist hooked to bottom of it......
-
Cheap old school 2" ratchet strap, one at each end with ratchet hung over outer edge of outside floor joist hooked to bottom of it......
Yep, I didn't have a ratchet strap, but had the pipe clamps.
-
Shawn, for a dope smoking hippy you sure are smart.....
Thanks. I have some pretty heavy duty straps
-
Shawn, for a dope smoking hippy you sure are smart.....
Thanks. I have some pretty heavy duty straps
:likebutton: sounds like a compliment Ken might give, you guys related? Or, maybe just an affinity for all things H by chance? :popcorn:
-
Meh. Just piling on. The ankles on Hillary are bigger than my thighs.
I had a lady on my team transfer to Denver to get closer to the places she and her family like to camp. Someone gave her a green cross t shirt as a gag gift.
Sent from my iPhone using Tapatalk
-
We cut a strip that has the other matched tongue or groove. Then hammer away on that piece. Do not try to hammer on the tongue or groove on the piece you are installing. By cutting a strip you have a sacrificial piece that mates up to your sheet. With careful planning you can get this strip from some fall off. We also use liquid nails or sub floor adhesive and many screws. What plywood subfloor material are you using? We use advantech and it has proven to hold up well if it gets wet. It is more like water proof osb though. Plywood is strong but buckles when wet and will suffer delimitation. The floor is small so that helps but make sure your first row is perfectly straight otherwise when you stagger joints you will start to stair step. You could mark off 4' rows and start at the row closest to the center and work out in both directions. That way you will have less stepping because you traveled half the distance. Also, inspect each tongue or groove for debris before locking it in. The shape can be cleaned out with a razor knife. Your best bet is to get the roof on once you lay the floor sheeting.
-
Meh. Just piling on. The ankles on Hillary are bigger than my thighs.
I had a lady on my team transfer to Denver to get closer to the places she and her family like to camp. Someone gave her a green cross t shirt as a gag gift.
Sent from my iPhone using Tapatalk
There are some very liberal (hateful pockets) here around / in Denver. Boulder is a large one, college town. I personally try to stay away from that place. When I do go there it seems I will get attacked at least once. Last trip 9 months ago (btw it's 15 min from my house) I had a guy come up wanting money to save the elephants. Can't make this stuff up, I warned him to go away & he did which was great for both of us but my guard is always high over there.
Now, there are also a lot of churches here. In fact the locally owned coffee shop is owned by a pastor of a church in Boulder. He's a real man in every sense of our definition. He's also on the front lines & has had services interrupted by mentally challenged individuals. Lots of good stories and I keep him in my prayers. There's plenty of tinder here & all it will take is a small spark.
One thing about it, for the most part you know which side people are on. I couldn't say that about NE IN, it was definitely hard to tell there. The ones here wear no camouflage......
-
Jared thanks for the tips. I tried to plan so that I had exactly the right number of sheets. The floor is exactly 16x24. But then I found that the 4x8 sheets are actually 96x47 when you account for the tongue engagement in the groove. SMH. Now I will have to go buy two more sheets. I'll start by ripping one in half and finish with one that is 2'6".
I hadn't thought about this but should I be cutting every other row into 4x4 and putting one whole sheet in the middle and the 2 4x4 pieces on the ends so I don't have one seam running all the way down the center of the room as I would have if I just laid them in full sheets?
Sent from my iPhone using Tapatalk
-
As for what it is, it appears to be just really thick plywood. I plan on getting the structure dried in shortly after putting the floor down. I'll tarp it in the mean time.
Sent from my iPhone using Tapatalk
-
I will backup how the OSB holds up to water! Had a leak in the tarp once the walls were up and I had a good inch of water trapped between the studs. 10 years later and the floor is solid, that exact spot above!
-
Tex you should stager the seams, when I was framing we just used a 2x4 on the open mouth side and hammed it into place. Seemed to work well and not damage the joint. If the joint does end up damaged just cut it open and clear out the degree
Sent from my iPhone using Tapatalk
-
Yes stagger the seams. We stagger everything on the floors, walls, roof,and ceilings. It is stronger staggered. It also minimizes seeing that seam once done. Advantech holds up to water. I prefer plywood for strength but it must be kept dry. I am sure there are exceptions to that rule using marine grade plywood and such but the cost goes up quickly. I can put a hammer through osb easily. Plywood is much harder to break. On the homes we build i use 5/8" plywood decking on the roof. It gets decking staples, then ring shank galvanized nails, then deck screws. Enough of each so that each type holds as if the other two were not there. Plywood will hold a roofing screw better than osb. In San Marcos, TX in 06 we had grapefruit and softball size hail. It went right into the living areas on homes with 7/16" osb. None of the hail punched through even 1/2" plywood. On the tornado/strong rooms we build we layer 3/4" plywood on the walls and ceilings then fasten the cube to the concrete with imbeds or wedge anchors every 12". We do that to reinforce when customers do not want concrete block. My business partner and i have hid several bunkers under buildings like yours.
I also agree that huge straps work well to pull panels into place. I use this method to get walls straight to brace and build off of once we start cutting the roof in. Good luck with your project. It is looking great.
-
One more thing worth mentioning. Make sure each piece of sheeting you use touches at least three floor joists. It will dip over time if you go from joist to joist. For example. With 16" OC your smallest piece should be a minimum of 32" wide. 24" OC and your minimum is 48". Full sheets and half sheets are best for strength and material usage. If you have a situation where you have to go joist to joist you can block under it to add strength. This blocking works but is not ideal if it can be avoided. Also if you end up short on the ends due to width you can pull the sheet away from the edge about half the width of the glue lambs. The wall can then be pushed out to the edge and sandwich the floor between the wall and glue lamb. Fill this void with material so the wall has a solid base. Check the spec on your sheeting. Some require a gap to allow for expansion and contraction. I use a nail to gap when needed.
-
Charles, I like this JH guy he is thorough. :likebutton:
Maybe we can recruit him for DOT status? I mean Ken seems to be slipping ever since H lost. Don seems to be able to post much more here lately with less interruption which is never good. :popcorn:
-
Guys thanks for all the advice. It makes so much sense to stagger seams once I started laying it. I cut the first row down to about 24 inches knowing I'll finish witj about 30 on the other side. This stuff is a workout. 1&1/8 thick. I used the grove from the piece I trimmed to make beater blocks. Sledge encouraged them into place. 49 deck screws in each sheet. When I split the last sheet into 4 ft pieces it was so bowed that no amount of screws would pull the edge down so I ditched it. Now I need 3 more sheets to finish. The APA label says the glue used in this ply is water resistant so hopefully if it gets a rain before I get it closed in I'll be ok
(https://uploads.tapatalk-cdn.com/20170911/46a88cf3473207feb753179d460456ad.jpg)
Sent from my iPhone using Tapatalk
-
Stagger looks good. Funny how it works out that even though you make the frame to match 4x8 ply, they are not!
Just roll on a coat of sealer when you are done, no worries about rain
-
Looks great. If the wood is water resistant you are golden. There will always be something exciting about the smell of cut lumber.
-
Thanks Jared. I plan to balloon frame with 2x6x12 and use a 2x4 for a ledger board let into the 2x6 wall at 9ft. Set i joists on that and that should give me 24 inches of pony wall upstairs on which to set the rafters on a 12/12 pitch. That should give me 10ft at the peak.
I plan to use a steel spiral staircase so on the side with the stairs I will have a shed dormer that should give me 8ft headroom at the top of the stairs. My biggest uncertainty is the roof framing. Just getting the birdsmouths accurate and the overhangs and shed dormer framed will be a challenge.
Like eating the elephant....one bite at a time....
-
Charles, do you need the roof joists laid out on cad? My new laptop and software should be here in the next couple days & I can do it for you if needed.
-
I will keep an eye on your thread. I know how to cut those rafters in and might be able to help if i can relay the information correctly. I can show you how to lay it out with a framing square or use my construction master from calculated industries. I feel like the calculator is cheating but it sure is fast. They are definitely worth their cost when used often.
I am currently framing a 1200 ft garage for a customer and doing my own home in its entirety as money allows to teach my 17 year old daughter the business. Framing is just one aspect of what we do. Currently i would take her over most of the guys that are willing to work. When i got my lumber package delivered all at once the kids were looking at the bundles. I told them that is there home and we just need to put it together. That is eating an elephant one bite at a time.
-
Hey Jared, have you seen my room addition? 1 step at a time for sure. Advice is always welcome.
http://real-man-truckworks-and-survival.com/index.php?topic=3048.0
-
Jared that's great experience for the kids. I have a few cheat sheets and such and I'm sure I'll muddle through it. As you know when you don't do this often (or ever) it just takes 4 times as long. Especially if you have plans in your head and somewhat sketched out on paper.
Shawn any and all help is apprecaited if you have something that will help and is not too much trouble.
outside edges of the walls will measure 16x24. roof will be framed on a 12/12 pitch with 2x6 rafters with 18-24 inch overhang (what ever looks right). In the middle of the left long side as vieweed from the front will have a 6 ft wide shed dormer that begins at the peak and slopes down about 18-24 inches to the end of the dormer. Sheath with 5/8 ply and metal R panel roof.
-
Jared that's great experience for the kids. I have a few cheat sheets and such and I'm sure I'll muddle through it. As you know when you don't do this often (or ever) it just takes 4 times as long. Especially if you have plans in your head and somewhat sketched out on paper.
Shawn any and all help is apprecaited if you have something that will help and is not too much trouble.
outside edges of the walls will measure 16x24. roof will be framed on a 12/12 pitch with 2x6 rafters with 18-24 inch overhang (what ever looks right). In the middle of the left long side as vieweed from the front will have a 6 ft wide shed dormer that begins at the peak and slopes down about 18-24 inches to the end of the dormer. Sheath with 5/8 ply and metal R panel roof.
Charles, laptop is being delivered tomorrow. Once I load the software I'll lay it out & send you a PDF.
-
Thank you Shawn. Much appreciated.
Today I picked up wood. Should start framing tomorrow.
(https://uploads.tapatalk-cdn.com/20170916/0b1a77d8833c296d2fc329fa254abfed.jpg)
Sent from my iPhone using Tapatalk
-
Thank you Shawn. Much appreciated.
Today I picked up wood. Should start framing tomorrow.
Sent from my iPhone using Tapatalk
:likebutton:
-
Great looking wood Charles. :wink
Sent from my Pixel using Tapatalk
-
Great looking wood Charles. :wink
Sent from my Pixel using Tapatalk
Careful Charles........ never know about these H supporters!
-
Oh I have some big wood for Ken....
Finished the sub floor and got one wall up. Even though I put the 24 ft wall up in two sections, a single 12 ft section was too heavy for me to lift. I think I have a testicle rolling around on the deck somewhere....
So I was stumped for a while. Then I figured that I would get my climbing gear and a climbing pulley and get up in a tree to hang a pulley then run it down to a carabiner then to the tractor. That proved to be a bigger challenge than it sounds like since my blocks nailed to the side of the platofrm to keep the wall from sliding broke loose....
So back to the drawing board. More blocks but screwed this time and put a lot of tension on the wall and went to lift then insert a 3ft 2x under the wall to hold it up. Then back to the tractor and I got it most of the way up but not so much that it would flop off of the deck. got it braced and then plumbed.
Then on to the second half using the same technique..
pics in a bit.
-
(https://uploads.tapatalk-cdn.com/20170917/9f173e4a328736dc47836a7312bf952a.jpg)
First wall up. 12ft tall 24ft long. 3x3 window over sink.
Next up. Other 24ft wall. Will have 2 4x5 windows. Evenly spaced.
Sent from my iPhone using Tapatalk
-
Nice fast work. Wall go fast, like the height
Can't wait to get mine going, wiring is a mess (tying in, what goes where)
-
It took much longer than it should have. Working alone is tough. A buddy is coming up in the morning. Should go faster.
JR renovations always take longer and are tougher. Piecing things together it much tougher
Sent from my iPhone using Tapatalk
-
JR renovations always take longer and are tougher. Piecing things together it much tougher
I hear you. Finally traced all the wires with my sons help. I have had to rewire the garage and pull new wire down to old outlets for about 1/2 the work now.
-
Happy Lord's Day gentlemen. Back at framing this morning. Got a buddy coming over early to help. My hope is to get all the rest of the walls up, but I'll settle on the remaining big wall and one of the end walls.
-
Have fun Charles,,,,,,,,,
-
Beer thirty
(https://uploads.tapatalk-cdn.com/20170918/a9b1c6e472858030806c149a91e01bd5.jpg)
Sent from my iPhone using Tapatalk
-
Good days work. About what you wanted, 3 walls.
Whats up with the stud above the right window?
-
Actually all four walls are up now. If you mean the left window from our view, I don't know what happened. I laid it out as I went and got off kilter on the jack studs above the header. Will cut them loose and re center later. Just wanted to get all four up and then I can tweak.
Sent from my iPhone using Tapatalk
-
(https://uploads.tapatalk-cdn.com/20170918/49c62af44deee42fc34f8b0ce853e907.jpg)
Here's all four up.
Next is cutting in the ledger for the joists for the second floor. I have 9 1/2 inch I joists.
Sent from my iPhone using Tapatalk
-
That front walk with two windows and the door was so heavy that two of us couldn't lift it. We had to use the pulley and tractor system and one guiding to get it up.
So some quick math says that wall was probably 600 lbs.
No wonder.
Sent from my iPhone using Tapatalk
-
Don't get me wrong, it looks great! Wish I had a wall or 2 up, still playing with wires :facepalm:
-
Now if you had added sheeting before leaning it up. Think of that weight added. Then you could have used a router to cut out the windows and doors too.
Sent from my iPhone using Tapatalk
-
My grandfather would not lift a wall until the windows, sheeting, tar paper, and siding were in/on it and either their full length or 16' minimum. I have never done it that way. Too heavy. He swore by it though. With my daughter we lift up to 16' walls by hand. But, i do not do window sills, tails, or headers in a wall before we lift it. For me i can get things perfectly square with less large lumber to shove over. I have also found i like the large cargo straps. I use chokers on each end to secure the strap. Walls can be moved in 1/8" increments easily to get and hold square. Are you doing a second top plate to weave your plates and corners together?
-
Good day's work, Looking nice!
-
Times 2 on the top plate question.
Sent from my Pixel using Tapatalk
-
Yeah. I braced and plumbed the long walls usining a good old fashioned plumb bob to eliminate false reading off crowned studs.
Once it's squared up I'll weave the top plates.
Dave I thought about sheathing it but those 2x6 walls are already waaaay to heavy. Easier to adjust in sticks if it needs to be massaged
Sent from my iPhone using Tapatalk
-
I still have some tweaking to do. I just wanted to get the heavy lifting done while I had help
Sent from my iPhone using Tapatalk
-
I agree on the 2x6 walls - took me and 3 neighbors to lift my garage walls - and had to lift them up onto concrete stem walls over anchor bolts.
-
Trying to get caught up here.
Got the walls up and made a mistake on the back wall. It was between the two long walls and I went 16 inch oc from the corner and not from the corner of the long wall so sheathing did not lineup from the actual corner. Live and learn. Cost me 2 sheets of plywood.
(https://uploads.tapatalk-cdn.com/20171124/33a3b773e1dc3663dab78b0b7f694dc8.jpg)
Here you can see the rafters going up. This is a 12/12 roof. with the 32 inch pony wall upstairs the peak of the roof will give me 10 ft inside peak.
(https://uploads.tapatalk-cdn.com/20171124/61fd7f5471025f1f089a8d37971fd994.jpg)(https://uploads.tapatalk-cdn.com/20171124/54548ce1dbae2f8d8f5d988d4f7ca41c.jpg)qthe plan is to have a spiral metal stair case in the opening which is about 62 inches square
(https://uploads.tapatalk-cdn.com/20171124/8c47daf248bf5192c0145ad8d1934884.jpg)
Which means I needed a dormer to get the require 7'6" height above the stairs
(https://uploads.tapatalk-cdn.com/20171124/d6ee229d3924240e13bcf7ba99112045.jpg)
Here you can see the lookout rafters and sub facia board going on. House will be all hardie including trim so I made the lookout rafters 14.5 inches so that with the 2x4 sub facia the 16 inch non vented hardie will completely cover all the wood and then a 1x8 hardi facia board finishes the outside edge.
Sent from my iPhone using Tapatalk
-
(https://uploads.tapatalk-cdn.com/20171124/6f3204a1bba2f55493141b93ff07f069.jpg)
Here’s where the often elusive common sense kicked in. Working alone to haul sheathing up a 24ft ladder seemed like a bad idea and would take one man forever. So I called the guy who built the main house and he hooked me up with his framing crew to come knock out the decking. Three guys at $46/hr. Seems reasonable and they knocked it our in 11 hours.
(https://uploads.tapatalk-cdn.com/20171124/ed7dd97344e5b2622b74e52ee50ed0ce.jpg)(https://uploads.tapatalk-cdn.com/20171124/b160e2c97312209fe28836ccc8c78a4f.jpg)(https://uploads.tapatalk-cdn.com/20171124/5abbf9b38566ec7932845c213c09ac56.jpg)(https://uploads.tapatalk-cdn.com/20171124/40c003eba1d76ea861e607226b6d6703.jpg)
Instead of 30# felt I’m using rhino synthetic underlayment. Supposed to be superior and can be left open to the elements for 120 days. Very thin fabric and a roll covers 100 sq ft. 2x4 purlins for the metal roof in place and metal roof ordered. Will be emerald green R Panel to match the main house.
Sent from my iPhone using Tapatalk
-
(https://uploads.tapatalk-cdn.com/20171124/1ffccb4c7cfab88bd9b863ddadc5a4b9.jpg)
So here’s where I got back to work. Wrapping the house in tyvek by myself was fun. Feel like I could leg press a Jeep after 100s of Tripp’s up and down the ladder to anchor on end then move the ladder to anchor the other then move the ladder and nail and tape all along the way. You get the point.
(https://uploads.tapatalk-cdn.com/20171124/b50e5ec6683b9bc41bf3e60ee20df4de.jpg)
Here the soffit coming together. Here’s where I hired the crew again. Holding 12 ft flimsy pieces of hardi 20ft in the air by yourself didn’t seem like a great idea. They knocked all the facia and soffit out in 5 hours. Another smoking deal.
(https://uploads.tapatalk-cdn.com/20171124/4e24d5872fb432ef59b06ba30d9e1932.jpg)
And back to me working again. Poured 12 tube form footings for the 4x6 porch posts and sank wet anchors in place. Here’s where lack of planning and engineering came back to haunt me a bit. The double 2x12 from the house to the posts is really not all that structural but securing them to the house in a way that didn’t include a ledger board was tough since I was building all the way to the edge. Some timber locks driven at 45 degree angles in the top and bottom of each 2x12 seemed to do the trick. I may add a Simpson right angle bracket but I have to keep protrusions to a minimum since this will all be covered in hardie. I did some pull ups from them so I guess that will hold
(https://uploads.tapatalk-cdn.com/20171124/8987bf2d5351712d2341c7dfde7e459a.jpg)
(https://uploads.tapatalk-cdn.com/20171124/51789c4b2f2daff31b35b5d710b63269.jpg)
Sent from my iPhone using Tapatalk
-
Looks good I like the progress
Sent from my iPhone using Tapatalk
-
Ran my crew today for 3 1/2 hours. Got all the main R panels up.
(https://uploads.tapatalk-cdn.com/20171126/96b6de22ce2ba16c963643b67992b45e.jpg)
Sent from my iPhone using Tapatalk
-
And my new Hitachi coil siding nailer came in from amazon. About ready to rock and roll some hardi plank.
Sent from my iPhone using Tapatalk
-
:likebutton:
-
Looks good. I was lucky and wrapped my walls before they went up. How are you going to cover the crawlspace?
Coil guns are great for this stuff. I have a bostich for siding and a HF for shingles.
HF framer was acting up a little today, didn't like loading new nails. Had to set a few by hand and dig a couple out of the gun. Still saved me a ton of work.
-
Not sure yet JR. Because of the humidity I don’t want to cloSe it off completely. More of a critter filter probably.
Sent from my iPhone using Tapatalk
-
I was thinking of critters and them getting into the woodwork.
-
Ok. Picked up a new 28 ft IA ladder, some scaffold jacks and some solar board for the porch since it won’t have spray foam insulation.
Sent from my iPhone using Tapatalk
-
(https://uploads.tapatalk-cdn.com/20171127/655eda0170d2712251d34b1e53db2ffc.jpg)
Sent from my iPhone using Tapatalk
-
You should look at some ladder adjustable feet from Sherwin Williams or another supplier. That new ladder will have you a long way up in in the air.
-
Yeah I probably do Bob. Especial on this sloping site so I don't have to dig with the claw hammer to level a spot.
Sent from my iPad using Tapatalk
-
That was a pretty penny for that fiberglass ladder!
Sent from my iPhone using Tapatalk
-
Yeah Dave, but cheaper than a trip to the ER. The 200 lb capacity type III I have (24ft) is wobbly as all get out, especially since I go 230 by myself with no gear.
-
I hate ladders but I own a forty foot ex, a thirty Ex, and a couple six foot A
frames.
You can never have enough ladders.
Sent from my iPhone using Tapatalk
-
So a few more tools came in this week. Maybe the reality is that I only build as an excuse to buy tools. (https://uploads.tapatalk-cdn.com/20171128/b9bd6d32d3489addc55ae524602683bd.jpg)(https://uploads.tapatalk-cdn.com/20171128/410fed3e33322c5d626753b42264a7f0.jpg)
Sent from my iPhone using Tapatalk
-
And here’s where I left the porch. (https://uploads.tapatalk-cdn.com/20171128/dbf2424573124e168a0cbf1a251f2e07.jpg)
Low slope. 13 inches over 8 feet. Needed it to tuck under the eave from the side of the main roof. Just need to build the lookout rafters and soffit and facia
Sent from my iPhone using Tapatalk
-
I run a duofast siding gun. My business partner had a hitachi of a couple years old. It might be worthwhile to see if your gun will run standard coils. The hitachi is the only gun that coils the nails backwards. This is an issue if you run anything but their coils. It just makes it a bit more costly and narrows what nails can he used.
But, if it only for one project it will be ok. And, maybe they fixed the coil issue. The house is looking great.
-
Is that the coiler special for concrete planks? got a pick of the nails? just curious.
-
Its like having a 408 cheytac with no ammo. Supposed to be a bad arse gun but we won't know until we get nails.
Jared, I think the new ones are pretty standard from the reviews I've read. Will report back shortly
-
When the siding gets installed you might want to consider using moist stop behind every butt joint which laps out over the piece under it. I cut 12” strips so i end up with a piece 12”X12”. This keeps water out of the joint once the caulk cracks with the expansion and contraction of the hardi. I use a staple slapper to pin it in place.
Also, use smooth galvanized fasteners. The ring shank which get used on fencing blows the back of the hardi out due to the ribs in the nails.
Edit. If they fixed that one issue with their coil gun it will rock and roll. I have a ton of hitachi pneumatic guns.
-
When the siding gets installed you might want to consider using moist stop behind every butt joint which laps out over the piece under it. I cut 12” strips so i end up with a piece 12”X12”. This keeps water out of the joint once the caulk cracks with the expansion and contraction of the hardi. I use a staple slapper to pin it in place.
Also, use smooth galvanized fasteners. The ring shank which get used on fencing blows the back of the hardi out due to the ribs in the nails.
Edit. If they fixed that one issue with their coil gun it will rock and roll. I have a ton of hitachi pneumatic guns.
Hardi no longer wants caulk to be used on butt joints. It's in the install instructions.
-
Got my first sheets up today. Gun worked great!
-
Good intel Jared and Ryan. I did see the install with the flashing behind the joints. Thanks for the reminder. Jared I’m assuming you are referring to the product line by Fortifiber? Can you link to the product or provide more specifics on comparable material to use behind the joints?
Also let’s chat about nailing. I get the ring shank piece.
I’ve never liked blind nailing just the hidden portion. It just seems flimsy. Would you also nail into the lower portion of the plank every 32 inches or so?
Sent from my iPhone using Tapatalk
-
In some states they require blind nails and a nail over the lap. I will give a run down on what i do and why. Some of my steps are not recommended. But, after many many houses it is what i do. I am in Texas so face nailing is not required in my area. I think some of the gulf coast regions do require the extra nail.
During my framing i use a sharpi to mark each stud and mark hazards on the outside of the slab. I do this before underpinning is installed which will cover my marks. If underpinning is already in i use a small pencil mark. This helps me locate studs accurately and fast to install sheeting. I then use this mark and transfer it to the wall for siding. So every hit is a stud for sure. There is no guessing.
I blind nail every stud. If i have two or three studs together i use two or three nails. I then do one face nail on each side of a joint. When this nail is left out these joints move too much for my liking. I also face nail as needed for rolls and such. Try to nail in the center of the lap. Too low and a nail will show. Too high and it does not hold the siding as well and could blow out the edge. I use moist stop for a joint flashing. You can use almost anything as long as it is water proof. I will post a photo later of my nails and my flashing.
I know hardi no longer recommends caulk but i caulk. My OCD will not allow me to see all those horizontal joints. These joints look terrible after paint unless the owner uses dark paint. Most are going light paint these days. They no longer recommend this as most painters use the cheapest caulk. It gets hard then the hardi expands and contracts and turns the caulk into a small ridge. This happens with the acrylic painters caulk which lacks silicone. I use the highest grade caulk i can. I also caulk twice to take care of shrinkage. I caulk as i go then i caulk a week later or once the siding is done. Carry a damp rag with you to clean up the caulk on butt joints. I try to leave a thin smooth layer over the joint to sort of bridge the gap. I have not had any issues doing this. I have used dap siliconized acrylic 40 year, i have used window and door trim caulk made by PL, and i have used dyna flex. Now here is where i also do what is not recommended. I caulk every horizontal joint and once again i caulk twice. The dyna flex or pl are thicker and harder to use but hold well and remain pliable. This sort of glues down the hardi pieces also. I started doing this after almost every homeowner insisted on it even when i said it is against the hardi installation instructions. But, i have been back to some of these homes twenty years later to repaint them and all is well. Some will say doing this traps moisture. This is true. But, had i used the 4X8 sheets the wall would have been sealed anyway. Any moisture would hit my flashing behind the joint. I leave 1/4” directly below this joint uncaulked. Or i come back and slit the caulk or push a scratch all into the caulk to leave an escape path for water that hits the flashing. With premium paints the walls are also sealed up and theoretically would trap water anyway.
On your starter row do a lathe strip. I just use deck staples to attach a 1”-1 1/2” wide strip of 1/4” luane plywood or i rip a 1/4” piece of a 2x4. Use a material slightly thinner than the siding because this gets attached to the framing. Then your starter row gets dropped down an inch to an inch and a half to create a drip lip. This distance i drop does vary based on how the home is framed. I mark all my first rows and chalk them out.
I use hardi nails for the siding that are 1 7/8” so as not to penetrate too far into a wall stud where wiring or plumbing is.
On the trim i use hardi trim. I also install it as if it was wood. This is also against the rules. My issue is too many windows extend too far out beyond the wall surface so you have to double up hardi and screw it in. Or use cedar which will eventually rot. What i do is have the hardi siding cover the window flange. I bring it up to within 1/8” or 1/4” of the window , covering the flange, then put the 1x4 hardi trim on top. I do this because i do not want a horizontal joint running the length of the window. This also holds the hardi down. With most windows this puts the face of the trim even with the window or 1/8” beyond. I then caulk the junction of the trim and siding and the trim and window. I exclusively use PL window and door caulk to seal the top of a window. I have also used NP1 which can be on a roof in the sun for something like fifty years. It takes paint well. Any caulk that is used that does not take paint such as pure silicone can be allowed to dry. Then go over it with the dap siliconized acrylic and you get a paintable surface. I caulk these areas between the window trim and siding twice to level out shrinkage. I only nail the trim in through the void of the hardi siding. If you try to nail through the 1x hardi trim and two layers of siding the nails bend over. I have experimented with galvanized non ringshank nails here with a framing gun but the framer is too tough and the nails too fat. So i use the galvanized non ringshank 2 1/4” nails here made for the hardi gun. The caulk i use also glues everything together. I carry a nail set while doing trim so i can get nails at least flush. Sub flush is ok. Just no reason to sink them too deep as they will not hold as well.
Make sure you get a good saw blade made for hardi. They run about $40 but they last me a dozen homes or more. I lose more to theft. They make some that are under $10 but they do not last. A good blade will keep chipping at a minimum. Also, cut with the table down wind. It will blow the dust away. Otherwise it causes silicosis. Bad stuff.
-
Deleted redundant
-
Sorry guys. I can not get my post to work. I tried copy and paste. It is only showing a small fraction. At least on my phone. Can someone let me know if you guys can see it in its entirety?
-
looks like it worked to me.
-
Nice instructions, looks like it posted fine.
-
I hope that was all of it, my brain is floating just trying to keep up with it so far. Great information, I’m looking at options for residing my new(to me) home and garage. Hardin is my top choice so far, but depends on cost maintenance/painting and other factors. We’ll see.
-
Jarod, if it was supposed to be 7,645,239 words, then yes it worked.
-
LOL. Sorry i am not good with describing my thoughts so if there is clarification needed i can do that. I need to find a computerologist. I can not add photos like on Cummins Forum with tapatalk here.
-
Jared, if the photos can wait a little bit, i will upload them for you when i get home this afternoon. Just PM me your email address and we can make this happen for you.
-
Jared. I bought a set of hardie shears to cut straight cuts. Have never used them before but it seems like they are perfect for cutting without dust. Any experience with those?
Also can you clarify on my question about nailing and the actual moist stop product?
Sent from my iPhone using Tapatalk
-
823058 is the Lowes item number to a product similar to the moist stop i use. I got mine at McCoys but can not find it on their site. I would have to actually feel the Lowes product to see how similar it is but it will work for the framing under the windows to flash the sill before windows go in and hardi goes on. It will also work on hardi joints. I have seen everything used from tar paper to synthetic roof felt on to and including metal tin or aluminum flashing. I just like the black roll flashing. I do not use house wrap as a flashing. You could also use many of the sticky window tapes also but they get expensive and are overkill.
I have never used or seen anyone use the sheers. I saw those and thought they were for the metal roof. If you like them let me know and i will give them a shot. I just use a diablo hardi saw blade. I try to never have a cut joint showing. I can get them perfectly square but if you look at the factory joint it has a very slight bevel. I hide all cuts under trim.
On the nails yes you can nail every 16” or 32” revealed. Or any pattern you want. The hardi holds tight under all the trim and with proper nails hidden under the lap. But, i always reveal nail my joints and any irregularity that needs a nail to suck the siding down. Too many nails showing looks bad. It will sort of dimple the piece and will have a nail to caulk. The goal is a perfectly flat wall without any waves.
I also use interior/exterior liquid nails. It holds tight to hardi and i use it on trim pieces that i would shatter with more than one nail. If it oozes out spread the ooze and paint it or caulk over it and paint.
If you use a saw keep the guard blown off with air. The dust clogs its function and before you know it it no longer covers the blade and the saw takes off when you set it down. The saw is fast and allows me to cut a six piece stack at a time. It is however very dusty so wind to my back and cut. No wind and i am working on another area of the house as the dust is overwhelming at times.
-
If anyone here wants to use Behr paint at Home Depot PM me. I have an account there which gets 20% off all behr products. It works at any location in the US but it could be verified at customer service before the paint is mixed. I am in no way endorsing them but use them and Lowes and Sherwin Williams. I have accounts at the other places as well but that discount is too hard to convey. The discount is immediate at the register with ProX rewards. You just enter my phone number. I get nothing for this discount. It is all to the purchaser. If this post violates any rules i apologize and i will delete it.
-
Jared, great information and thank you for sharing your experience.
I'm most confused about all the differing and changing thoughts on window installation. Particularly the use of flashing material below the window, whether that be moist stop or other tyvek type products. If you already have a complete layer of tyvek on the house why and what use is that additional flap of material 12-18 inches below the window?
-
If anyone here wants to use Behr paint at Home Depot PM me. I have an account there which gets 20% off all behr products. It works at any location in the US but it could be verified at customer service before the paint is mixed. I am in no way endorsing them but use them and Lowes and Sherwin Williams. I have accounts at the other places as well but that discount is too hard to convey. The discount is immediate at the register with ProX rewards. You just enter my phone number. I get nothing for this discount. It is all to the purchaser. If this post violates any rules i apologize and i will delete it.
No, you're good
Men helpin' men...Iron sharpening Iron...
You're just practicing your Christianity, that's all
No chance you'd be added to the same list that Ken, Shawn, and a couple others here are on ;-))
-
Another point
Jared, you seem to know quite a bit about buildin'
You should post over in the construction area
Let me see, I may be going somewhere with this...Brain (old as it is) is startin' to do some conjurin'
You could be a oracle of sorts. People could seek advice, after paying the proper homage, of course, then the oracle could speak, and the matter could be settled.
Could call it:
J Speakes
or
J's Advice place
or
The J list
or
Builder J and the do-right corner
or
J the answer man
or
Something like that
You could tell numbskulls (Tex comes to mind...as well as me) how to do things properly
As this idea starts to focus I see a new moderator being born. But this one did not ask for the job. You see around here, anytime someone has an idea about a new discussion area (Just ask Tex-red-neck) he/she gets appointed a moderator...
Just sayin' that this is new ground for me...someone who didn't suggest an idea gettin' corralled and all that...
-
Another point
Jared, you seem to know quite a bit about buildin'
You should post over in the construction area
Let me see, I may be going somewhere with this...Brain (old as it is) is startin' to do some conjurin'
You could be a oracle of sorts. People could seek advice, after paying the proper homage, of course, then the oracle could speak, and the matter could be settled.
Could call it:
J Speakes
or
J's Advice place
or
The J list
or
Builder J and the do-right corner
or
J the answer man
or
Something like that
You could tell numbskulls (DON comes to mind...as well as me) how to do things properly
As this idea starts to focus I see a new moderator being born. But this one did not ask for the job. You see around here, anytime someone has an idea about a new discussion area (Just ask Tex-red-neck) he/she gets appointed a moderator...
Just sayin' that this is new ground for me...someone who didn't suggest an idea gettin' corralled and all that...
-
823058 is the Lowes item number to a product similar to the moist stop i use. I got mine at McCoys but can not find it on their site. I would have to actually feel the Lowes product to see how similar it is but it will work for the framing under the windows to flash the sill before windows go in and hardi goes on. It will also work on hardi joints. I have seen everything used from tar paper to synthetic roof felt on to and including metal tin or aluminum flashing. I just like the black roll flashing. I do not use house wrap as a flashing. You could also use many of the sticky window tapes also but they get expensive and are overkill.
I have never used or seen anyone use the sheers. I saw those and thought they were for the metal roof. If you like them let me know and i will give them a shot. I just use a diablo hardi saw blade. I try to never have a cut joint showing. I can get them perfectly square but if you look at the factory joint it has a very slight bevel. I hide all cuts under trim.
On the nails yes you can nail every 16” or 32” revealed. Or any pattern you want. The hardi holds tight under all the trim and with proper nails hidden under the lap. But, i always reveal nail my joints and any irregularity that needs a nail to suck the siding down. Too many nails showing looks bad. It will sort of dimple the piece and will have a nail to caulk. The goal is a perfectly flat wall without any waves.
I also use interior/exterior liquid nails. It holds tight to hardi and i use it on trim pieces that i would shatter with more than one nail. If it oozes out spread the ooze and paint it or caulk over it and paint.
If you use a saw keep the guard blown off with air. The dust clogs its function and before you know it it no longer covers the blade and the saw takes off when you set it down. The saw is fast and allows me to cut a six piece stack at a time. It is however very dusty so wind to my back and cut. No wind and i am working on another area of the house as the dust is overwhelming at times.
I have to give it to Jared if you are typing all of this on a PHONE!! I can't hardly type my email address correctly. Great content! :beercheers:
-
I am no expert. Just someone sharing information. I would be glad to answer any questions i can. The projects going on here are exciting. I am blessed to be able to do what i love for a career which is home building. I learned most of what i know from my grandfather and father and grew up on job sites. My grandfather retired about twenty years ago which set the wheels in motion to put me where i am today.
I am currently building my home with my oldest daughter. She just turned 18. She is interested in construction so we will do a complete home together so she can see the process and we can take it slow. The neighbors were puzzled to see a girl hanging beams when we were framing. Then they were wondering how a 115 pound girl could deck a roof with 5/8” plywood. I did have a crew pour the concrete and another drill the well. Everything else will be just us including the septic tank installation.
Anyway, if anyone needs help here just let me know.
-
Any hints on my build are welcome. Know I have a couple of opps with stud spacing, but nothing major.
-
...So no one picked up on recruitin' Jared???
-
Jared needs to start an intro line!
Sent from my iPhone using Tapatalk
-
That sounds awesome Jared. I only wish that at least one of my girls were interested in getting their hands dirty and learn some skills .....for free no less!
-
Jared needs to start an intro line!
Sent from my iPhone using Tapatalk
What is that and where do you do it? I am usually here somewhere reading. Or over on the diesel forums watching the fighting and shaking my head. Just got done reading two other build threads here that were very interesting. This site has tons of good information and a great group of men.
-
Jared, shot the hitachi for the first time today. Used 2 1/4 Galv wire coil 15 degree. I assume that 0 degree will not miraculously work in this gun? It works well.
Also the electric hardie shears are awesome. Zero dust and drama and easy to keep a straight line. I’ll try to post a video
Sent from my iPhone using Tapatalk
-
https://youtu.be/DZ3Bw8G2qUk
It cuts faster. I was having a hard time holding the board down with my foot and the phone with one hand and the shears with the other. It’s variable speed and easy to work. They have one that is for curves and you can easily cut round openings with it.
Sent from my iPhone using Tapatalk
-
Wow i have never seen them in action. Looks like they will work great. Anything to keep that dust down is a huge plus. Hitachi makes great guns and compressors. I have had great luck with them.
-
Started working on the deck today and ordered the rest of the eave trim and r panel for the porch. Here’s where I left it today. Hope to get the porch deck finished and the roof mostly done over the porch. (https://uploads.tapatalk-cdn.com/20171202/0654e99f186379d5675290469d94a7fc.jpg)
Sent from my iPhone using Tapatalk
-
Looks good. Did you say you were going with a spiral staircase?
-
I like those shears, just wonder how long they stay sharp.
My mother in law added on to her house, turning it into quite the place, and they used hardy...lots of it. She hand stained each piece (wood stain?) herself, and I tell you what, it looks absolutely great....almost like a log cabin-ish. Just thought I'd throw that out there..
..wish I had a pic to show you.
-
Jared needs to start an intro line!
Sent from my iPhone using Tapatalk
What is that and where do you do it? I am usually here somewhere reading. Or over on the diesel forums watching the fighting and shaking my head. Just got done reading two other build threads here that were very interesting. This site has tons of good information and a great group of men.
Jared,
If this link works. Follow and you should be able to start an introduction from here
Tell us some history, your location, lay down some back ground and always remember to poke Don in the side anytime you can
Site Rules & Introductions
https://r.tapatalk.com/shareLink?share_fid=1020467&share_sfid=10&url=http%3A%2F%2Freal-man-truckworks-and-survival%2Ecom%2Findex%2Ephp%3Fboard%3D10&share_type=sf
Sent from my iPhone using Tapatalk
-
JR yes, spiral stairs, which is why I needed the dormer.
Ken I think it will last a while. The blade is pretty thick and a touch up with a file to keep the right angled edge would be about all I could see it needing at some point.
I only do construction. Wife will pick out the color, which may precipitate painting the main house to match if she picks a color different than what's on the main house....would like to see a picture of that stain tho
-
Got the deck done today. Simpson hangers and screws and 5/4x16 ft boards so there are no joints. (https://uploads.tapatalk-cdn.com/20171202/9acfcb47744c6a7ee93eef705c469231.jpg)
(https://uploads.tapatalk-cdn.com/20171202/451dff41cddce618ec02d093a82eb754.jpg)
Sent from my iPhone using Tapatalk
-
Aaannd...the deck is done.
Looking really good Charles.
-
Thanks Sam. That was a nice caribou you took. The metal for the porch should be in next week. I have the stuff to deck it and just need to finish the soffit and overhang. Going to use solar board on the porch some it won’t have spray foam insulation under it.
Sent from my iPhone using Tapatalk
-
Can't decide on whether I want to put railing on the porch. I know code would say so, but I live code free in the woods. I do need to lay out the stairs, but I have two small trees right in front of the stair placement to cut down. By big Husvarna 372XP won't even sweat. I may just use the old poulan 20inch box store special on it.
So the delivery of the shipping container is scheduled for tomorow. I need to get up there later this evening so that I can drill holes and drive rebar in the ground through the rear most railroad tie to give the driver a place to set the back of the container. Then I'll slip another one under the front as he drops it. I'll lift the front of it with my high lift jack (rated 4600lb) and do final adjusting for the front and middle railroad ties. Unfortunately I don't have enough tractor to lift it as it will be about a 4250lb one end lift.
Once I get it leveled I'll work on pressure washing inside and out and then painting the outside green to match the shop
-
Jared needs to start an intro line!
Sent from my iPhone using Tapatalk
What is that and where do you do it? I am usually here somewhere reading. Or over on the diesel forums watching the fighting and shaking my head. Just got done reading two other build threads here that were very interesting. This site has tons of good information and a great group of men.
OK, I did it for ya. This is your thread ($5 a month, but we'll discuss that in private ;-)
Use it to discuss and answer questions about construction information. Lead these boneheads with good advice and they will reward you with friendship and endless DOTing of your important information!
Here it is:
http://real-man-truckworks-and-survival.com/index.php?topic=3181.new#new
-
Jared needs to start an intro line!
Sent from my iPhone using Tapatalk
What is that and where do you do it? I am usually here somewhere reading. Or over on the diesel forums watching the fighting and shaking my head. Just got done reading two other build threads here that were very interesting. This site has tons of good information and a great group of men.
Jared,
If this link works. Follow and you should be able to start an introduction from here
Tell us some history, your location, lay down some back ground and always remember to poke Don in the side anytime you can
Site Rules & Introductions
https://r.tapatalk.com/shareLink?share_fid=1020467&share_sfid=10&url=http%3A%2F%2Freal-man-truckworks-and-survival%2Ecom%2Findex%2Ephp%3Fboard%3D10&share_type=sf
Sent from my iPhone using Tapatalk
Bad advice!
You're banned for poor (No) use of discretion! And for spreadin' this DOT heresy! I'll not have it
(As if short of everyone's untimely demise it would evre cease!)
You should know better
I'll get around to removin' your credentials, password, and whatever else I have to do, in a bit, if I can remember to do so...Now, what was it I was about to do anyway?????
-
Oh, and you knuckleheads point Jared to his new thread and coach him along...Copy?
-
Copy.
Sent from my iPhone using Tapatalk
-
Oh, and you knuckleheads point Jared to his new thread and coach him along...Copy?
If we have to
(https://uploads.tapatalk-cdn.com/20171203/fd8efdf5cebda4c168df9a70a26fd639.jpg)
Sent from my iPhone using Tapatalk
-
:likebutton:
-
Look what showed up today (https://uploads.tapatalk-cdn.com/20171204/fbee83646289ee3f54635783f7f2c875.jpg)
Sent from my iPhone using Tapatalk
-
Heck yeah....should be able to hold a few pounds of powder in that shed.
-
Ok. This was a bit of drama because of all the trees but he finally got it in place. It’s got a railroad tie under each end and it’s actually level!
Here is the spot I picked out. Back behind the shop and tucked way in the trees. Mama doesnt want to have to see it.
(https://uploads.tapatalk-cdn.com/20171204/1ddeb69531c6aa38829eec17ff0c98c0.jpg)
Got spot leveled and measured so that the front will be even with the back of the shop. Like things neat and orderly. Drilled three holes and drove #8 rebar 4 ft into the ground so that when he sat the backend on the tie it didn't want to roll or move.
(https://uploads.tapatalk-cdn.com/20171204/914a1909fb1a5a4bcf42bcdc08cfeae1.jpg)
(https://uploads.tapatalk-cdn.com/20171204/755b0f2245339bbd5e38b036c22a6f5a.jpg)
Can't believe my 20V drill put a 1 inch auger bit through that RR tie. I left my big 1/2 electric drill at the other house of course. But the little drill did well!
(https://uploads.tapatalk-cdn.com/20171204/9ab1dcf7c9a4849480d317a56fb41004.jpg)
Got the rear RR tie level and went to work on the front spot.
(https://uploads.tapatalk-cdn.com/20171204/06edab6f425471b1b16160616fe739ce.jpg)
Sent from my iPhone using Tapatalk
-
I figured you would have bought one in Red.... :tongue:
-
How much did it run ya tex? That size out here is 4K ish delivered 60 miles.
Sent from my iPhone using Tapatalk
-
I figured you would have bought one in Red.... :tongue:
Ha! This one needs to blend in. It will get a green paint job and I may camo the far side with some brown in addition to the greenHow much did it run ya tex? That size out here is 4K ish delivered 60 miles.
I bought the CWOinstead of the WWT (cargo worthy, instead of just a wind and water tight) the CWO is more but its usually in better shape cosmetically and structurally. Delivered 140 miles from the Port of Houston was just under $4k. Bought it from a broker online, called Western Container Sales. Pretty smooth process.
-
I figured you would have bought one in Red.... :tongue:
Ha! This one needs to blend in. It will get a green paint job and I may camo the far side with some brown in addition to the greenHow much did it run ya tex? That size out here is 4K ish delivered 60 miles.
I bought the CWOinstead of the WWT (cargo worthy, instead of just a wind and water tight) the CWO is more but its usually in better shape cosmetically and structurally. Delivered 140 miles from the Port of Houston was just under $4k. Bought it from a broker online, called Western Container Sales. Pretty smooth process.
Dang that's a pretty good price I feel. We got ours from a dealer in Tucson. So I guess it makes sense why they are cheaper there, direct from the port probably helped.
When our box was purchased we were told by the dealer it was a one tripper. It does appear that it is as close to brand new you can get. It was 3600 delivered. Neighbor bought two 40' one high cube the other regular, he paid over 4 for the first one and just under 4 for the second. Interesting to see none the less.
I will enjoy watching it on paint and build in and on it.
-
(https://uploads.tapatalk-cdn.com/20171204/d7a855ae47e2eb15e05c2ae1d96fc896.jpg)
used an old trick to level the front RR tie to the back
Here is a tight fit. took him a few stabs to get it right.
(https://uploads.tapatalk-cdn.com/20171204/66e50e164036db4df7dcafdc608dcf75.jpg)
and here it sits
(https://uploads.tapatalk-cdn.com/20171204/5bb5e49d95206e4974728f8942c03ba8.jpg)
(https://uploads.tapatalk-cdn.com/20171204/b2c23b5c14eadb939feca82e0547b7a4.jpg)
Aaaaaaaannnnnnnd, it's level.....
(https://uploads.tapatalk-cdn.com/20171204/73581dd6070896d7641a432b98478eee.jpg)
Sent from my iPhone using Tapatalk
-
(https://uploads.tapatalk-cdn.com/20171204/3be4ebb7a6ec6df454c18db0f0ea0aa7.jpg)
Starting to sketch out the inside and supplies list...
Sent from my iPhone using Tapatalk
-
very nice
-
:likebutton:
Thinking a HF airless spraygun would do great on that.
-
WYO if you got a one tripper for that price, its a steal. One trippers are closer to 6k here.
Shipping Container - 8'x40' High Cube / CWO (Next off stack) / Towards Cab of Truck (off last) for $2,990.00 each
Discounts : $-200.00 USD
Subtotal : $2,790.00 USD
TX State Tax : $213.44 USD
Dallas Municipal Tax : $68.30 USD
Shipping : $625.00 USD
Total : $3,696.74 USD
I got a discount code for two hondo just for asking.
JR, assuming I can get it back from my dad, I have a Titan commercial airless sprayer that should work just fine. Drop the pickup in a 5gal paint container and get busy.
I will do a build thread on it but there are a few tricks I plan on keeping to myself
-
Tex mine is only a 20'... I left that out sorry. It was also given to us for some work we did for my neighbor. I was with him when he was looking at his 40 high cube, and some how or another, he said "well buy it for you, we had planned on paying you anyways" so of course I didn't say no. Was a good month of work.
We haven't done anything to it other than fill it with our stuff. Shelves would probably be a good thing.
Sent from my iPhone using Tapatalk
-
Well I’ve been fighting a monster cold and against my wife’s better judgement I was out there yesterday and today. I’ve now lost my voice and am wiped out. But I did get the porch framing finished and got it decked with polar shield. I chose solar sheild since the porch will not be insulated and I want as much relief from the sun as possible.
And of course I ran out of my roll of synthetic underlayment and will have to buy a whole new 1000 sq ft roll for about 150 sq ft
(https://uploads.tapatalk-cdn.com/20171210/c6dc002b43bca5e282357b43c14283e0.jpg)
(https://uploads.tapatalk-cdn.com/20171210/10f97071c82a77332659d5257eb5f1ca.jpg)
Now I won’t admit she was right but as soon as I get home I’m taking a shower under the endless hot water and getting a nip of 129 proof
Sent from my iPhone using Tapatalk
-
Looks good Charles. Hard to keep a good man down.
Think your porch is the size of my add on :embarrassed:
-
Eat raw garlic if you can stomach it. Seems to have always killed any bug I might catch, as I never stay sick long.
Equal parts ACV, lemon juice and raw honey with some hot water, helps heal a sore throats and fight the cold.
Eucalyptus oil on the bridge your nose will help clear it....if you have any. Obviously keep it out of your eyes, the fumes are bad enough. But it helps tremendously!
Sent from my iPhone using Tapatalk
-
Eat raw garlic if you can stomach it. Seems to have always killed any bug I might catch, as I never stay sick long.
Equal parts ACV, lemon juice and raw honey with some hot water, helps heal a sore throats and fight the cold.
Eucalyptus oil on the bridge your nose will help clear it....if you have any. Obviously keep it out of your eyes, the fumes are bad enough. But it helps tremendously!
Sent from my iPhone using Tapatalk
T- Maybe you should post that up in the Remedies thread in the med section...We do have a thread like that, don't we??
Edit: Found it:
http://real-man-truckworks-and-survival.com/index.php?topic=1360.0
-
Ok. Back at it today. Picked up my windows yesterday. Marvin Integrity Fiberglass single hung single light.
(https://uploads.tapatalk-cdn.com/20171216/93143b1a19184984f06f28e71691ebf1.jpg)
Started on finishing the roof today. Residential take and the ridge cap are the first order. Then I’ll tackle the windows before going back to finishing the eave flashing and closures.
Then I’ll install hardie in the gable above the porch before installing the metal roof on the porch
Here’s a neat gizmo to get on a steep roof
(https://uploads.tapatalk-cdn.com/20171216/aaacd4b28eca362a8222836857e35bc6.jpg)
Sent from my iPhone using Tapatalk
-
So those hooks mount on the ladder and have a wheel. Push it up the roof on the wheel side and then flip it over and rest it on the hooks. I taped 1" foam pipe insulation to protect the metal roof.
-
(https://uploads.tapatalk-cdn.com/20171217/2c01f00c81fbf9522c219201781989ad.jpg)
(https://uploads.tapatalk-cdn.com/20171217/14b5630f2687135eab6cd7a0b59c6137.jpg)
It started raining so I got one window in. Just need to put the corner gaskets on it and then drop the head flap and tape the sides and top.
Sent from my iPhone using Tapatalk
-
Those ladder hooks work great. But, if you ever get in a bind take a page from our company safety manual and use the human ladder. You should see our section on power tools. (https://uploads.tapatalk-cdn.com/20171217/3e476aa50c4eb7d78a55e91f75f13c48.jpg)
-
That's nuts.
Plus I work alone.....kind of hard to do that.
Any recommendations on tool belts? Mine broke after 15 years.
-
I am PICKY about my tool belt. Mine usually die many times before they go into the fire. I just try everything on until i find one with pockets that i can deal with. I would like one of the leather tool vests they have out now but with a back injury that I had fixed i want to keep weight off my spine. Plus in Texas they are probably hot.
For me i need pockets that can be switched from holding framing tools to holding electrical tools. We handle most trades so versatility is key.
-
If you work alone keep a cell phone on you at all times. I had a call from a guy that had missed his mark with a framing nailer and nailed his hand to a rafter. I had to go over and climb up and use a nail puller to get him free. If he had left his phone any place other than his pocket he would have been hanging there for hours.
-
I need a better one too, probably with shoulder straps. Won't stay on my waist :facepalm:
-
Yikes Jared, that's sounds terrifying.
Sent from my Pixel using Tapatalk
-
Yeah I keep my cell phone. Usually in case I falll to the ground from 20ft up so I can call 911, if I’m conscious. Today I was texting back and forth with Norm while on top of the roof.
(https://uploads.tapatalk-cdn.com/20171217/1c017dcdee0656f0fdd305427cfd3cdc.jpg)
Sent from my iPhone using Tapatalk
-
He musta been text happy today......
I was hanging a light fixture in our mast bath while conversing with him about smokers.....
-
If you work alone keep a cell phone on you at all times. I had a call from a guy that had missed his mark with a framing nailer and nailed his hand to a rafter. I had to go over and climb up and use a nail puller to get him free. If he had left his phone any place other than his pocket he would have been hanging there for hours.
Sounds like he needed his claw hammer so he could get that nail out more than a cell phone.....rofl
and that's a big miss...
-
I live with 5 women, sometimes I just need male conversation.
Besides I had your safety in mind guys, if you'd have fallen, I'd have txt'd my concern :cool:
-
If i remember what he said i think he was crawling over the rafters with his hand on the trigger, a big no no, and he sort of bumped his hand with the gun. The older framing guns had real soft and easily compressed nose safeties. Just hold the trigger and brush it over a surface and a nail fires. Our newer guns have a better spring and a spiked tip so they are harder to fire.
When we have ceiling joists and rafters that are 16” oc it makes it hard to crawl around with a tool belt on. We usually install all the ceiling joists and then the ridge. Then the rafters all get cut. Then the only thing you need to install rafters is the nail gun. I work alone often. Things happen that are unexpected and it is good to be able to get help.
One morning i had to run to a few stores and the bank. When i got to the job all the roofers were sitting on the roof. Their boom lift they used to get on the roof had run out of fuel. They had been sitting there for hours with no way down. It was hot and they were all thirsty. Someone the night before had siphoned the diesel out and they did not know that until it was too late.
-
I live with 5 women, sometimes I just need male conversation.
Besides I had your safety in mind guys, if you'd have fallen, I'd have txt'd my concern :cool:
Understandable. And I feel your pain. I have 3
Sent from my iPhone using Tapatalk
-
I really like the green metal. When doing shingle roofing i use old foam couch cushions to keep from damaging the hot shingles. On metal roofing the same foam sticks to the metal. You can get on a steep roof and the foam grips like crazy. I try to plan my trips up steep metal roofing the day after rain so some of the dust is washed off. If i see a couch on the side of the road i stop and grab the cushions if they are foam. Just remove the slip covers. The foam is best when used in pairs. Jump or crawl from one to the other. On hot days it keeps you from getting burned and your shoes from melting and leaving rubber marks.
-
I have a LOT of metal roofs on buildings so thanks for the tip. I usually end up on said roofs in the summer, I usually ruin my arm hairs and burn my self multiple times. Almost always drop my hammer somehow....and watch it slide 50' and wonder what it will land on.
The good news is, they are rusty *1920's era So they have decent traction built in LoL But your idea would sure save on the old knees.
-
I live with 5 women, sometimes I just need male conversation.
Besides I had your safety in mind guys, if you'd have fallen, I'd have txt'd my concern :cool:
Understandable. And I feel your pain. I have 3
Sent from my iPhone using Tapatalk
Have three as well, no actually 4...Wifey...
-
Problem with mine is that it is 12/12. Nothing short of a ladder and hooks will keep you from shooting down that slope at a high rate of speed.... finsihed the ridge caps today. Now just need to flash the wall of the dormer where it meets the roof.
-
(https://uploads.tapatalk-cdn.com/20171217/f5d2a59aa64de4638d21a996265adb8d.jpg)
Sent from my iPhone using Tapatalk
-
Yup. Nothing sticks to a 12/12.
-
(https://uploads.tapatalk-cdn.com/20171218/6382e4ef148215f184eaa0277f0de5eb.jpg)
Here both end pieces are on and I’m reasybti install the ridge cap over the dormer.
Now my backside feels like I rode a horse alll day. Straddling the peak of a 12/12 roof to shoot screws in the ridge apparently is a trauma to the buttocks and groin area.
Sent from my iPhone using Tapatalk
-
Looks very nice Charles!
-
I can't even fathom working that 12/12
I metaled that 6/12 this past summer and that gave me sore legs for three days
Hat's off to ya!
Post two points in your RM bank account (Redeemable for a hardy handshake and a toothy smile ;-)
Oh, and consider yourself completely rehired!
-
That's nuts.
Plus I work alone.....kind of hard to do that.
Any recommendations on tool belts? Mine broke after 15 years.
Most of the carpenters around here that I can speak the same language as run Occidental bags. They look very very nice. Spendy, but will last ya forever.
I don't use a belt enough to justify spending that kind of money, so i use a CLC padded back support belt and shoulder straps, and replaced the CLC flimsy nylon bags with the more rigid Husky bags. It works for me.
This bag on the right: https://www.homedepot.com/p/Husky-2-Pocket-Small-Framer-Pouch-with-Leather-GP-46667N14/205593560
I hate having my hammer in my middle back, i like how this one is on the side, but out away from your waist so it doesn't smack into your knees. There's others just like this one, but bigger too.
And a smaller bag for my left side (can't find it on HD website, but it's basically the same line, just pouches for nail strips, screws, torpedo level, chalk line, etc etc
-
I’m sure glad you didn’t weigh in last week Dawg. Those are some high dollar bags. I ended up with AWP ballistic nylon from Lowe’s. My only complaint is my framed had a custom set up he made with a Franken bag that allowed him to carry the nailer behind him by using the hammer hook and a supplemental extra hook and the gun rested nicely on them both and he was able to climb well with it held in place. The awp is nice in that the location of the pouches are adjustable and held in place by a layer of Velcro between the padded belt and the belt.
Sent from my iPhone using Tapatalk
-
The nail gun hooks can be bought at HomeDepot and Lowes now. They are usually near the tool belts. They attach to the air inlet nipple. Many guns even have them built in. I have them on most of my guns so i can hook them to my belt or to a rafter or ceiling joist. Since i have been getting the hooks i have not seen a $400 gun come off from up high and fall onto the slab.
On another note i had a hammer hook once in the middle back. It was an awkward reach. I tried the hook in the middle front which did not last long.Those Occidental bags are good but expensive. I usually just pick mine up at Lowes or HomeDepot. They last a couple years but start to get holes. I am currently looking at new bags. I need a better drill holder solution. The key with bags is to be able to find a tool without looking. Also, the pockets must stay open. Two belts ago i had one which held my Springfield XD 40. The amount of dust that got on it though required a daily cleaning. I will Frankenstein my next belt to fit the 40 again. Going to look for a closed holster. Maybe something with a couple of snaps.
-
Do yourself a favor and order one of these to stick in your new bags. Absolutely love this thing
Morakniv Craftline Carpentry Chisel with Carbon Steel Blade, 3.0-Inch https://www.amazon.com/dp/B00T3ES1SC/ref=cm_sw_r_cp_api_jAPoAbWB8TDR2
Sent from my iPhone using Tapatalk
-
Kyle what do you use it for?
Today I was supposed to work on writing performance reviews for my direct reports,but with rain coming tomorrow I wanted to get windows in. I got 6 of 8 in, including one of the 4'0X5'0 windows, which was a bear to get in.
I'll work on performance reviews tomorrow while it rains and then when it clears on Saturday I'll finish the windows and the final small roof trim pieces and then roof the porch.
-
The nail gun hooks can be bought at HomeDepot and Lowes now. They are usually near the tool belts. They attach to the air inlet nipple. Many guns even have them built in. I have them on most of my guns so i can hook them to my belt or to a rafter or ceiling joist. Since i have been getting the hooks i have not seen a $400 gun come off from up high and fall onto the slab.
On another note i had a hammer hook once in the middle back. It was an awkward reach. I tried the hook in the middle front which did not last long.Those Occidental bags are good but expensive. I usually just pick mine up at Lowes or HomeDepot. They last a couple years but start to get holes. I am currently looking at new bags. I need a better drill holder solution. The key with bags is to be able to find a tool without looking. Also, the pockets must stay open. Two belts ago i had one which held my Springfield XD 40. The amount of dust that got on it though required a daily cleaning. I will Frankenstein my next belt to fit the 40 again. Going to look for a closed holster. Maybe something with a couple of snaps.
Oddly enough Lowes did not have them but HD did. My brand new coil nailer slid down the roof and onto the ground. Fortunately no damage but I need to hang it from something other than the bag.
-
My 2 coil nailers have rubber bumpers so they don't slide.
I got one of those chisels some time ago. Does about anything but is finicky to get the sheath to stay put. Sharp as heck.
-
Kyle what do you use it for?
I think it's used for cutting wood. Often referred to as 'chiseling'.
:wink
-
Doh!
Well got all the windows in and flashed. Tidied up the job site a bit and swept out the house now that it’s closed up save the front door. Will be getting on that quick. Supposed to rain and if it does I’ll work in the shop to clean and organize all my tools before getting back at it. Need to put purlins on the porch and then install the metal roof and trim. Then on to hardie siding and trim.
(https://uploads.tapatalk-cdn.com/20171222/94cf03ff649139748f336d67e92e032d.jpg)
(https://uploads.tapatalk-cdn.com/20171222/3034940a89d57f6a3823ea8ab15c71e7.jpg)
(https://uploads.tapatalk-cdn.com/20171222/6d201701eed08fe8d3f0364b40477a60.jpg)
(https://uploads.tapatalk-cdn.com/20171222/4893e1f356a46ea958926f0efcfc97e0.jpg)
(https://uploads.tapatalk-cdn.com/20171222/f7153a951dcf142598102905fd7f8ae2.jpg)
Sent from my iPhone using Tapatalk
-
(https://uploads.tapatalk-cdn.com/20171222/e5234ca99e9a094e47d710ee7e9b4e41.jpg)
(https://uploads.tapatalk-cdn.com/20171222/d17564ad18077fb46b688972122a7426.jpg)
Oh. And my thumb is throbbing. Got lazy and held a nail with thumbnail facing up. 28 oz framing hammer go boom. Redneck go squeal like a pig
Sent from my iPhone using Tapatalk
-
I like those hooks holding your walking planks to the extension ladders. What brand are they and where can I get a set?
-
Werner brand from Lowe’s. They make two versions. One wider than others. These are the narrower ones.
Sent from my iPhone using Tapatalk
-
https://m.lowes.com/pd/Werner-Jack-for-Ladders-Or-Scaffolds/1000122497
Sent from my iPhone using Tapatalk
-
One thing I didn’t mention was that in order to get the slope to the sills I took my saws all and cut a small wedge out of the jack stud and then shimmed up the sill. Wish I’d have planned it when I framed but it worked out well this way. Had about 3/16 slope when done. I was really happy the sills were all spot on left to right and required no extra shims.
Sent from my iPhone using Tapatalk
-
(https://uploads.tapatalk-cdn.com/20171223/6d50b7a9768f3571a460287b6ce489a0.jpg)
Sent from my iPhone using Tapatalk
-
Amazing how much a smashed finger/thumb can hurt
-
Not many things more fun than smashing a digit with a fresh waffle hammer.
Sent from my iPhone using Tapatalk
-
I hope you don't get tired of me posting"it looks great" because you might hear it a few more times before you're finished.
Sent from my Pixel using Tapatalk
-
X2 ^^^^
-
Thanks gents. Working on the metal roof for the porch. Got purlins up and attaching hardie facia so I can get the overhang right. The porch will be the only part of the house with a gutter on it. Pics later.
Sent from my iPhone using Tapatalk
-
Honestly what amazes me the most is that you have done almost all of it by yourself. Great work.
Sent from my iPad using Tapatalk
-
One learns to be creative when working by oneself
Here is the porch roof. Two inch overhang. Ran a string to keep it straight.
(https://uploads.tapatalk-cdn.com/20171223/2613e5a458ecbf0125a309b66c653d4a.jpg)
(https://uploads.tapatalk-cdn.com/20171223/e1af7e4d38a51a3f88ec84ee89e3f2fe.jpg)
(https://uploads.tapatalk-cdn.com/20171223/765edc866db2e4e6ce25a5d806c26b96.jpg)
And I picked up these nifty shear attachments today.
Sent from my iPhone using Tapatalk
-
And now I won’t say that I forgot the butyl tape between panels until halfway through and had to go back and undo and lift the edge of each panel and out the tape down.
Sent from my iPhone using Tapatalk
-
(https://uploads.tapatalk-cdn.com/20171223/c78745464a83add8bfbf37c7b1c38a94.jpg)
Sent from my iPhone using Tapatalk
-
(https://uploads.tapatalk-cdn.com/20171223/c78745464a83add8bfbf37c7b1c38a94.jpg)
Sent from my iPhone using Tapatalk
-
You have to seal between panels? I thought they just overlapped..?..
-
They do Ken. However. Best practice is a line of butyl tape along the top of the panel that gets overlapped. It would have to be some hard wind driven rain to get through but on a low slopes roof I didn’t want to take any chances.
Sent from my iPhone using Tapatalk
-
Oh, on the top. I was thinking sides.
-
It goes on every lapping seam on the sheet getting lapped. The tape is used on metal that does not have a second ridge with a channel contained within the ridge. It stops capillary action which could draw water over the ridge high point and into the metal and roof deck surface. Butyl tape or seam tape is not used on sheets that have an inner channel. Some types that do not require butyl tape are five v, rain guard, or channel drain.
With low pitch areas r panel or u panel are best because the ridges stand higher giving you more depth for water to stack before it leaks. The taller the panel ridges the lower the pitch can be.
-
like this
-
Well heck, you are talking about the sides also. Never did it that way before...sure glad it don't rain much out here.
-
It would have to be a low slope and some torrential wind driven rain, but hey they call for it so I'm gonna do it.
-
I like the look of the shear attachment, how well did it work?
-
I like the look of the shear attachment, how well did it work?
Worked well. Worth the $60
Sent from my iPhone using Tapatalk
-
Where the image above shows the tape it also seals the screw hole that is made between the metal sheets. If the butyl tape is put on the other edge the seam is sealed but the screw hole will leak.
The tape is a pain to use when doing the metal on your own as it will stick each piece together pretty good before you have a chance to adjust the panel. This is worsened with warm tape and hot panels.
I never understood why you needed tape until last year. It was shown to me that with the little lap, on r and u panel, and no center channel within the lap that wind can blow water up slightly into the seam. The wet has a propensity to roll back and slightly up anyway. Then capillary action continues the pull of water into the dry side.
I have always had issues with valleys and wind. Around here we have straight line winds and storms with 60 mph gusts which are not uncommon. On my home we just finished the roof a few months ago. They now have expanding foam in rolls that will seal a valley. The material compresses to 1/16” and expands to 1”. Seals up the valley real nice. Years ago we always tried flashing and butyl tape and np1 with mixed results. I also used this expanding foam anywhere that had a gap that needed to be filled before flashing was bend to cover the opening.
Your outer edge looks great. Too many times people let it saw tooth. Yours is perfect. The fact you did that solo is very impressive with tape. Looks great.
-
Thanks Jared. You have a link to that foam stuff?
A trick to working with the tape is to leave the wax paper on it until the panel is in place and then put a screw in the panel to hold it in place and slightly lift the edge and pull the paper strip off.
-
Yes, that is how i do it but i will admit it took a few jobs before i started doing that. Let me see if i can find a link to what i use. I bought it at Montopolis supply in Austin TX.
Montopolis is a great company. It is in the center of Austin and heads explode while there. It is an old school company that has been there for decades. It has been swallowed by ultra liberal Austin. There is not a single wall without a sign with a religious saying or scripture quote. Even their receipts contain scripture quotes along with book chapter and verse. People have tried to get these items removed siting offense. They refused. Awesome. I will get some photos of what is left of mine.
http://www.montopolissupply.com/
(https://uploads.tapatalk-cdn.com/20171224/1e92afed2c6335e80a56051e510427ca.jpg)
-
Here is the expanding foam i used. It is for valleys since no closure can be cost effective to manufacture for each metal type and valley pitch. The pitch changes the length and angle of the closure.
I also use it any place that needed a closure that did not match the profiles i bought. Worked well. (https://uploads.tapatalk-cdn.com/20171224/1e84e57757e7313d3631a8599facbb13.jpg)(https://uploads.tapatalk-cdn.com/20171224/460bfb5fd0512a64dc8fb2be8c624fc5.jpg)
Butyl /seam tape(https://uploads.tapatalk-cdn.com/20171224/32f8349cf91fd98907f3afd254520268.jpg)
-
Very cool. I might need to check that out.
Today was a slow day. Bible study and I drove get a couple of rolls of butyl tape and installed flashing on the dormer walls and the porch. Finished the facia around the porch. Have to get some more outside closures.
Sent from my iPhone using Tapatalk
-
Kyle what do you use it for?
Sharpening pencils, opening boxes, cleaning out notches, cutting off splinters, etc etc. it’s sharp as hell, but also has the strength of a chisel
Sent from my iPhone using Tapatalk
-
Kyle what do you use it for?
Sharpening pencils, opening boxes, cleaning out notches, cutting off splinters, etc etc. it’s sharp as hell, but also has the strength of a chisel
Sent from my iPhone using Tapatalk
When I read your post, I looked up that knife thing and immediately went and ordered it.
I bought a new framing belt and just placed it in there. Question: Seems light to me, can you pound on the handle end to use like a chisel? Strong enough? Remember who it is you're talking with...Carrep...
-
Don, hammer of 2 ounces or less (thinking the ones that come in those cheapo women household type tool kits) in your case & you should be ok as long as you don’t leave I laying on ground & run over it. Don’t paint it tan & orange either as you’re apparently attracted to that color.
:popcorn:
-
Kyle what do you use it for?
Sharpening pencils, opening boxes, cleaning out notches, cutting off splinters, etc etc. it’s sharp as hell, but also has the strength of a chisel
Sent from my iPhone using Tapatalk
When I read your post, I looked up that knife thing and immediately went and ordered it.
I bought a new framing belt and just placed it in there. Question: Seems light to me, can you pound on the handle end to use like a chisel? Strong enough? Remember who it is you're talking with...Carrep...
I have yeah, its so sharp you won’t need to pound hard. You won’t want to pound and pry like you would a heavy chisel, but it’s a pretty well made little tool. You’ll see, it’s extremely sharp
Sent from my iPhone using Tapatalk
-
I’m the cart on amazon. Today I made another of what seems like endless trips to the metal building supply. Bought outer and inner closures and some more screws and then a drip edge for the porch and more
Residential rake as I mis measured by 4 inches. Failing to account for overhang and trim at the rear. I could have pieced it together but I’d always know I screwed up every time I look at it. So I ordered two new pieces. $30 mistake so it’s not the end of the world
Sent from my iPhone using Tapatalk
-
So got the additional metal pieces and got them installed on the porch. Aside from a few small trim pieces that I'll need to install after the hardie goes up, I'm done with the roof.
Windows are in and I started foaming the gaps, On the recommendation of a builder, I went to a place in Houston called the Door Clearance Center. So busy its a zoo but good deals. Probably saved $400 on two doors.
Got a pre hung fiberglass door and ordered a matching slab door so that I can replace the door on the main house to match the Casita.
door installed and ripped a shim for the strike side of the jamb that gives me a solid piece of wood shim between frame and studwall. Will get a heavy duty striker plate and anchor 4-6 long screws in it.
Took the trailer back and put all new tires on it getting ready for a 4900lb load of hardie plank, which I ordered. Hope to pick that up next week and get started on hardie. Got my coil nailer ready and a case of nails, will see how I like that brand before getting some more.
Having trouble getting my 2 1/2 inch finish nailer running. got some replacement seals but still having trouble. If it won't run I'll probably just buy another one for the trim.
-
(https://uploads.tapatalk-cdn.com/20180106/7d016a7247cba4a8777aa4a1a6b4830a.jpg)
(https://uploads.tapatalk-cdn.com/20180106/e12a5853e610a7bf8a1330edf5c78d4a.jpg)
Sent from my iPhone using Tapatalk
-
:likebutton:
Looking good, how many years until retirement?
-
who really knows, Shawn. I have 2 girls, 12 and 14. I may never see retirement. My hope is 10-12 years, but retirement for me would just mean doing something different. Small business or something until they kick dirt on me. I can't stand not to be doing something.
-
who really knows, Shawn. I have 2 girls, 12 and 14. I may never see retirement. My hope is 10-12 years, but retirement for me would just mean doing something different. Small business or something until they kick dirt on me. I can't stand not to be doing something.
I understand, after move to CO (hippy land) I had to reinvent myself a bit. It’s been a slow pace (conservative & trying hard to crawl before I walk to manage savings & investments) as it’s a whole different world here & how things work comparably. I am the same way though & will be doing something until I am no more. The slower pace has been a nice break & I see things picking up so trying to manage that as I don’t need nor want 18 hour days ever again.
-
Place looks great!
Being retired is nice. Got all my wife's perks for now and seem to have no free time unless I really just sit. That is never long as you start add ons and suburban projects.
-
So yesterday I started tackling the hardie plank.
Last week I put 4 new tires on the trailer. Got rid of the chinese paper thin junk and picked up 4 goodyear endurance "merica" made tires with road hazard certs at discount. I feel much better about towing that thing around with decent tires on it.
(https://uploads.tapatalk-cdn.com/20180114/8d08450c349de3c5554efd5c293ec50b.jpg)
I wanted to buy from my local lumber yard where I had been buying all my big lumber purchases, but they just couldnt get within $300 of the box stores. Interesting that the box stores where identical in price (to the penny) on hardi plank and the prices varied from the stores in Houston to the stores in the Piney Woods of East Texas with Houston prices being cheaper. So before work on Friday I went to Lowe's and placed the order with the contractor desk and picked it up about 1:30. They don't carry the Hardie Shingle, interestingly enough, so I will have to get that elsewhere. The plan is to have a little architectural interest and transition to the shingle panels on the dormer above the main roof line. (bonus: those shingle panels are 48 inches and easier to handle, me thinks)
(https://uploads.tapatalk-cdn.com/20180114/aec97b9480673cf344e40b961c4c7bcc.jpg)
So I really need to get some trailer brakes put on the trailer. With 4500 lbs of weight on the trailer I was not confident towing that in rush hour traffic with the OBS truck and their mediocre brakes, not to mention my hydroboost is leaking and probably not working as well as it should. Add that to the list of innumerable things I need to get to.
Yesterday, I stared at the building and the pile of Hardie for what seemed like an eternity....or about a cup of coffee worth anyway.....
then I stared at it some more and realized to eat the elephant, you must take the first bite. The big side with windows and the dormer is the most critical since the roof transition needs to be flashed with the hardie and I want to make sure its 100% right. Since its the hardest, as we like to say, eat the frog. Do the hard part first and the rest will be easy..
The foundation is 3 1/2x11 7/8 glue lam and to minimize the visual height, since the walls are already 12 ft, I clad the base in smooth 12 inch hardie soffit and will paint it dark brown to give the illusion of a foundation and break up the expanse of hardie. Since the tyvek runs all the way down I caulked the bottom of the tyvek to seal it then attached the hardie.
The sheathing is 15/32 plywood so it hangs out over the foundation by that much and because I want the hardie to completely cover the gap between the subfloor and the hardie soffit on the foundation, I needed to double the kickout course at the bottom. Since the planks are designed to overlap at an angle,the bottom course has to have a small ledger piece ripped to keep the angle on the bottom piece. because of the sheathing and because I was over lapping the siding to the foundation, I was attaching the kickout ledger strip on the soffit piece on the foundation which was already recessed 1/2 from the sheathing surface, so I had to double it up to get the correct angle.
Then I pre built the corners of 3.5 inch trim by fastening them together with 2 inch 16ga finish nails then attached them to the building with 2 1/2 inch 16 ga finish nails. this assures perfect alignment of the corner pieces.
Then starting at the bottom I broke the first course halfway (24 ft building and pieces are 12 ft) and then staggered the joints in a pattern of stud wall spacing. 0,4,7,2 so that the joints were somewhat random and not just a stair step.
Then came framing the windows. It took some figuring but because of the way the frame of the window sits I can't put the hardie completely flush with the frame so I'll have about 3/16 to caulk. Even then, because of the flange and flashing, I learned (by having to go back and shim after the fact) that I needed to shim the vertical pieces so they sit flat. Fortunately I had a bunch of composite shims left and simply shimmed out until the pieces were parallel with the wall and hit them with the nailer.
So between all the figuring and remembering how to get started, and rebuilding the porter cable finish nailer, and re-stringing my chalk box, it was probably 10am before I started hanging planks.
Bought these gecko gauges which really make working alone a lot easier and keeps the courses much more accurate. Well worth every penny I paid for them. They are adjustable to set the reveal anywhere between 4 and 8 inches and hold the plank in place so you can use both hands to adjust and nail as needed.
(https://images-na.ssl-images-amazon.com/images/I/71mwNF3bTsL._SL1500_.jpg)
Interesting, as much as I liked the shears, I'm still trying to figure out the accuracy of them, so I find myself going back to the saw, but having to put on the face mask filter is a pain.
So fairly drama free day despite being at or below freezing most of the morning I did this to my thumb trying to catch my falling 28ft ladder (did I mention that those class IA fiberglass ladders are heavy?). Must of hit it on one of the square edged brackets, but it tore off skin and part of the nail.
(https://uploads.tapatalk-cdn.com/20180114/22ddd1b3d0a7ee4b879c5c7d3916a328.jpg)
In the winter, this side of the casita doesn't see any sun, so it was like working on the dark side of the moon. With a 5mph breeze and no sun it was a bit chilly all day.
So here is where I left it and I look forward to getting back at it today. Will probably get to the eave and then start working on the porch/front until I can get the hardie shingle for the dormer.....
(https://uploads.tapatalk-cdn.com/20180114/74ad94cc97c1ce86dfe541fdfb50dc42.jpg)
-
Looking good Charles! :likebutton:
-
I have always had the same issue you are having with your windows sticking out further than the trim if i understand you correctly. On my next project i think i will mill some trex to build the window trim out 3/16”-1/4” beyond the window rather than being that amount subflush.
If i remember correctly you have vinyl windows. Those usually have a return which will allow the trim and window to be sealed whereas aluminum window have no return so you end up with a void that is troublesome to seal. I have tried doubling up hardi but my nailers will not get a nail through 1 1/2” hardi. Plywood would be easy but would rot unless sealed well. I think trex or composite deck material would work and be millable.
Your project is looking great.
-
Thanks guys. That’s a good idea Jared. I have fiberglass extruded windows in this project. So far I’m pleased with them.
Yeah so say a 3 inch piece of trex milled to about 1/2 inch would recess the window about 1/4 inch. Then I could cheat the hardie over to butt right up against the window. Next
Build ....if there ever is one. Lol.
Sent from my iPhone using Tapatalk
-
:likebutton:
-
Today I learned that things slow way down when you get further off the ground. Didn’t get started until after bible study and breakfast so got in about 5 hours worth.
Got too dark to take a final photo but finished the side up to the last course before it will transition to the hardie shake shingle in the dormer. Tomorrow I’ll start on the front under the porch.
(https://uploads.tapatalk-cdn.com/20180115/aaff55acfc8a9d2eee6dd7569b2e0912.jpg)
Will have to rip some jamb extensions for the door, trim the windows and door and then get rocking.
Sent from my iPhone using Tapatalk
-
I kinda liked the LOWES siding,,,,,,,,,,
-
So, Monday, we were off for MLK day. I got started by ripping some wood for jamb extensions and then attaching them to the frame with biscuits glue and screws. Now I have to figure out the sill extension but I can get to that later.
Then I started trimming the windows and door with hardie. Based on my experience with the windows on the other side and some good advice from Jared, I started trying to figure out how to get better fittment of the hardie next to the windows, especially since the porch is the workmanship I'll have to look at most I wanted it to be right.
So I found that the hardie siding was really really close to being able to shim the trim out to the right depth so I ripped from siding 3 inch wide which allowed space for the protrusion of the window and flashing and allowed me to get the hardie right up to the frame and even recess the window in the trim about an 1/8 of an inch. I still had to use the slightest of composite shim but it turned out really well. I have 4 more windows to go and 3 of them are high off the ground so there's that....
(https://uploads.tapatalk-cdn.com/20180116/abd83afaea4fef7511caf564193cd87a.jpg)
(https://uploads.tapatalk-cdn.com/20180116/868727f83732b6a2e3ac208f5b3fd5e8.jpg)
Once I got the trim put on the door and two front windows I had to stop and make a 3 hour trip to the pool guy again.....we were having some communication problems with the square footage of the decking and needed to work it out in person.
So with that said, it looks like I'm about to bury a brand new L5P Duramax in the yard......
Only thing left is to see if I can work him down on the cost to add a 14x24 slab for the outdoor kitchen while they are at it.
Oh well, I'll just smile and write the check and watch the family be happy.....
So its probably not productive to think about all the things I could do with with that money.....
turn-key 50x80 shop building....
Couple of nice pieces of hydraulic machinery....
3 pre 86 full auto NFA items....
but I digress.....
So I got back from the pool detour and had about 1 hour of daylight left and I was able to get most of the hardie up on the left side of the door and had to stop and pick up all my tools. My AO there looked like the Red Dog had gotten into my shop and strewn my tools from one end of the yard to the other.... My shop is a disorganized mess and it drives my OCD crazy.....
I may run a crew next weekend to get the other two sides of the building finished quickly. I need to get this thing done so I can start on the shipping container project which needs to be foamed with insulation at the same time. Depends on whether the crew leader is hung over or not I suppose...... Weekend work for those guys is beer and girlfriend money....
-
Truer words never spoken! "Oh well, I'll just smile and write the check and watch the family be happy....." :popcorn:
-
Amazing what we give into to keep the family happy. I must say though, I love my pool too.
Hows the thumb?
-
Thumb is fine unless I touch it. Having trouble buttoning shirts and pants. Almost made me pee myself yesterday as I held it too long and was having trouble getting my jeans unbuttoned.....
I probably ought to disinfect it, put some triple A on it and cover it, but I'm lazy
-
Accidentally spill a little whiskey on it & you’ll be fine!
-
Hmm. I like the way you think. Perhaps I can hold my whiskey with my left hand and just let the thumb soak In the glass
Sent from my iPhone using Tapatalk
-
Shame on you trn!!!!!!!
Your thumb should get its own glass for all the pain and suffering you just it through. .....why does it have to share with you......HAHAHAHAHAHAHA
-
Ol framing joke. See who gets it. Soak it in cider lol
Sent from my iPhone using Tapatalk
-
Dave, I think framers and mechanics have similar brains. :embarrassed
Sent from my Pixel using Tapatalk
-
Dave, I think framers and mechanics have similar brains. :embarrassed
Sent from my Pixel using Tapatalk
Still waiting for big brother to come and delete it. I noticed a bit ago a curse word gets deleted pretty fast
Sent from my iPhone using Tapatalk
:popcorn:
-
That is what spelling phonetically will get you. Fonetikaly? If you still do not get it read it out loud to your wife. Thats what i did lol.
-
Well Mr Dave, there has to be a line drawn somewhere!
-
I aint touching that with a ten foot pole. I am however excited that the temps will get into the 60s this weekend so I hope to get more hardi hung. Although the chance of rain is high.
-
That is what spelling phonetically will get you. Fonetikaly? If you still do not get it read it out loud to your wife. Thats what i did lol.
I hope you didn’t get smacked on my part
Sent from my iPhone using Tapatalk
-
OK guys, serious moment, you knuckleheads... (I'm starting to sound like Don.....:-0 )
So I successfully negotiated my being robbed by a pool contractor....which means that I will also be pouring a slab for an outdoor kitchen..(gotta up my game to keep up with Nate)
Its going to be 14x24 with a roof structure over it. I'd like to use the same wax treated 4x6 posts to match the porch on the main house and the castia.
My concern is how to attach the posts to the slab so that the roof is stable. I'm convinced that surface mounting the posts will lead to a rickety structure. there will be 6 posts.
While I could use 45 degree braces on each side of each post at the top it would clash as none of the other structures have that on the posts.
Is there a way to attach posts to concrete in a more solid fashion?
Or should I sink the posts in the ground prior to the pour?
The structure will be typical shed type roof with hardie soffit, metal roof, etc, so there will be some mass to it.
Looking for some advice and experience. ........
Where's Jared?
-
Links to follow of what I would look at
https://www.strongtie.com/standoffcolumnbases_columnbases/cbs-cbsq_productgroup_wcc/p/cbs.cbsq
https://embed.widencdn.net/pdf/plus/ssttoolbox/worqn198p0/Deck-Details-11x17.pdf
This website has some pretty sweet options that can help ya in the right direction
Sent from my iPhone using Tapatalk
-
OK guys, serious moment, you knuckleheads... (I'm starting to sound like Don.....:-0 )
So I successfully negotiated my being robbed by a pool contractor....which means that I will also be pouring a slab for an outdoor kitchen..(gotta up my game to keep up with Nate)
Its going to be 14x24 with a roof structure over it. I'd like to use the same wax treated 4x6 posts to match the porch on the main house and the castia.
My concern is how to attach the posts to the slab so that the roof is stable. I'm convinced that surface mounting the posts will lead to a rickety structure. there will be 6 posts.
While I could use 45 degree braces on each side of each post at the top it would clash as none of the other structures have that on the posts.
Is there a way to attach posts to concrete in a more solid fashion?
Or should I sink the posts in the ground prior to the pour?
The structure will be typical shed type roof with hardie soffit, metal roof, etc, so there will be some mass to it.
Looking for some advice and experience. ........
Where's Jared?
My vote would be to sink the post in ground prior to pour. Similar to pole barn structure. I used plates on top of concrete when I built a large pergola in Texas and it still wiggled more than I liked. I ended up attaching it to the house.
Good luck. Great progress on your hide. :beercheers:
-
My experience with pole building types in northern WI. Sink them about 4 ft in the ground. Back fill with dirt only. The 4 ft level here is an approximate. That is about how deep the frost goes in most places.
-
My experience with pole building types in northern WI. Sink them about 4 ft in the ground. Back fill with dirt only. The 4 ft level here is an approximate. That is about how deep the frost goes in most places.
It was 36-40 in NE IN, here in Colorado it’s 30” although after building my shed which sits on 4 posts if I had to do it again I would go deeper. Maybe it’s soil type as we had heavy clay in IN but this sandy clay mix doesn’t seem as stable & we have bentonite in the soil which is notoriously unstable. I might auger those posts in Tex & throw a round patio stepping stone in bottom of each to help spread the trash load.
-
If you are using the posts i think you are burying them in the dirt and concreting around them will remove any movement and also take the need for using braces on the corners away for a year or two. Then the posts will be either rotted or termite infested and will need to be redone. When we get into free standing structures we go to 4x4 steel posts galvanized and buried in a hole filled with concrete. Or we use imbeds and weld the post to the imbed.
You can do imbeds and attach wooden posts to them but no matter what there will be a pivot point there. Depending on the amount of air push and lift that roof has it could be substantial movement. If it were my structure with my family underneath it i would do at least one of these things.
1) corner braces on wood or iron posts.
2) cement in galvanized posts and have a plate at the top of the post that wraps around the beam and is structurally screwed to the beam removing movement and the ability to lift.
3) Wall in two sides of the structure and internally reinforce the roof structure to stop any side to side movement.
4) Anchor it to an existing structure.
It is nice to match existing structures but it is more important to ensure a structure is stable. The posts can be rocked around and used as a feature that matches some existing rock on the pool or in the yard to keep a theme going. I have been lucky to never have a structure come down. In my part of Central Texas it is common to get straight line winds. I have been on ranches and seen structures that are not braced and anchored properly simply get ripped from the ground and tossed into a pasture. What is more common is less wind that induces sway and the roof being heavy pivots the posts and lays over. If the corner braces are not proper it can snap the post right below the brace.
-
OK guys, serious moment, you knuckleheads... (I'm starting to sound like Don.....:-0 )
So I successfully negotiated my being robbed by a pool contractor....which means that I will also be pouring a slab for an outdoor kitchen..(gotta up my game to keep up with Nate)
Its going to be 14x24 with a roof structure over it. I'd like to use the same wax treated 4x6 posts to match the porch on the main house and the castia.
My concern is how to attach the posts to the slab so that the roof is stable. I'm convinced that surface mounting the posts will lead to a rickety structure. there will be 6 posts.
While I could use 45 degree braces on each side of each post at the top it would clash as none of the other structures have that on the posts.
Is there a way to attach posts to concrete in a more solid fashion?
Or should I sink the posts in the ground prior to the pour?
The structure will be typical shed type roof with hardie soffit, metal roof, etc, so there will be some mass to it.
Looking for some advice and experience. ........
Where's Jared?
hey now, I am just trying to keep folks from getting complacent.
check out this thread.....its a bit long but dang if there isnt some great ideas here.
www.bbq-brethren.com/forum/showthread.php?t=108239
-
Here is a free standing carport we did behind a custom home. We went around and around with the engineer and homeowner on this one. They wanted heavy timber with no braces. Minimalist. We declined to build it without bracing. It is properly built and braced. It is VERY top heavy. All the internals are cedar beam. It moved in every direction 4”-6” even with the corner braces. I have it pinned to an old cedar so the roofers could go up top and be safe. Before we left we also used 1/4” plate on every single joint with through bolts. That is when we removed the tree brace. (https://uploads.tapatalk-cdn.com/20180119/634ab564cb062217e71085704db733e3.jpg)The plates helped stiffen it up and it is still there today but i do not think it would stand without corner braces. Without the plates and through bolts the movement would have eventually worked the timber locks loose until it failed. Once high winds are factored in bracing is essential.
-
To keep it solid you would would have to bury the posts. I just used the above strong ties but doubt they would give you a solid structure.
Now an idea is to sink a round galv pole sticking up a couple ft. Bore the matching posts and slide over the poles. You get a solid mount with matching posts
-
JR might be onto something. Some of the 6X6 turned posts already have a square hollow core. Maybe you can find some square tubing that fits inside without drilling and compromising the post. If you do use pipe use heavy pipe. Like rigid electrical conduit pipe or drilling pipe. The thinner fencing pipe used on corners is good with compression to a point. But, if there is a side load that causes any deformation of the wall they will bend real easy. Most posts are only strong when vertical. Induce sway and the post is no longer vertical. Also, on these covers the posts are exposed to more weather as wind blows rain into the structure. Even with good paint the expansion and contraction of the wood forms small cracks in the paint. These cracks absorb water into the post under the paint where it is harder to dry out. This increases the speed at which they rot. If you can find posts treated and rated for ground contact they will last longer. Much longer. The posts i am seeing on the market are treated with a wax type coating which makes them safe to use inside a dwelling. This coating is also used as a food preservatives and is safe and non toxic. But, outside they are not holding up well for extended time periods.
Another thing worth mentioning is that turned posts with a hollow core get pretty thin where they are turned. The manufacturers are using (4) 2x6’s glued together with a hollow core then turning them to kick out these posts. I think the 6x6 posts are rated for @5500-6000 pounds each but only in compression.
Something else i learned the hard way is to always wrap wooden posts that are getting wrapped with rock really well. They need to be pre painted and wrapped in house wrap or tar paper or both. If not the rock absorbs water this water is transferred to the post and causes the post to swell. This swelling post expands and cracks the rock work which allows more water in and more swelling.
-
In our soil here it is about four five years before anything treated or not rots out if buried in the soil
Sent from my iPhone using Tapatalk
-
Or you could use metal poles buried in the ground anchored with concrete. Then you could build your wood post look around them
-
OK, so something has to be in the ground. I kind of like the idea of steel wrapped in treated wood to form a column. I get some steel from the supply place which is 3/16 wall and 2 1/2 diameter pipe. Would work well for this. Just need to auger some holes and drop some concrete. Other choice is to fence black the bottom of some treated 4x6 and bury in soil then pour concrete slab. Best estimate is that it would take 10 years to rot, then I could redo the posts.
Attaching to the other structures is not an option I think. this ODK will sit at an 45 degree angle between two structures and the roof line is already complex
-
Jared mentioned a square steel post in ground, with a heavy bracket on top to bolt the wood posts to. What about using a thick walled box, say 16" tall, anchored on, or in, the slab, with extra footings under those areas? Basically just a h/duty taller version of store bought versions? Or if you were lucky enough to find some square tubing with the inside diameter close to the dimensions of the timber?
Sent from my Pixel using Tapatalk
-
Jared mentioned a square steel post in ground, with a heavy bracket on top to bolt the wood posts to. What about using a thick walled box, say 16" tall, anchored on, or in, the slab, with extra footings under those areas? Basically just a h/duty taller version of store bought versions? Or if you were lucky enough to find some square tubing with the inside diameter close to the dimensions of the timber?
Sent from my Pixel using Tapatalk
Ken has a legit idea here, wait did I just say that? :huh:
You could dig or auger footers where the columes go, toss in some rebar on the heavy side. Then use square tube or even drops of I-beam. Note: if you can find a structural fab shop they will have all sorts of i-beam drops in the 4’-6’ range, check out scrap yards too. Weld a flange to the base or end of tube / I-beam and anchor into concrete. Build posts on or around them. Essentially the base is anchored well and then the upper & exterior is a fabricated wood post. Easy to replace when they rot out ten years down the road versus trying to dig up a wood post that was set in concrete.
-
I did that (galv post) on the corner of the fence where I have my TH. Sank it about 4' down, then built a square column around it. Solid as a rock about 200# of cement int there.
-
Rather than bury a steel column why can I not bolt a steel flanged post to the slab??
Sent from my iPhone using Tapatalk
-
Having dug/extracted several rotten posts/concrete from my fence the last few summers, I HIGHLY recommend using some form of metal solution!
-
Rather than bury a steel column why can I not bolt a steel flanged post to the slab??
Sent from my iPhone using Tapatalk
My uneducated guess would be that the stress/force is better spread across more of the beam and concrete instead of a small section of studs/bolts susceptible to flexing in high winds. Think weak spot like your wrist versus your forearm.
-
Rather than bury a steel column why can I not bolt a steel flanged post to the slab??
Sent from my iPhone using Tapatalk
That’s what I was trying to convey
Ken has a legit idea here, wait did I just say that? :huh:
You could dig or auger footers where the columes go, toss in some rebar on the heavy side. Then use square tube or even drops of I-beam. Note: if you can find a structural fab shop they will have all sorts of i-beam drops in the 4’-6’ range, check out scrap yards too. Weld a flange to the base or end of tube / I-beam and anchor into concrete. Build posts on or around them. Essentially the base is anchored well and then the upper & exterior is a fabricated wood post. Easy to replace when they rot out ten years down the road versus trying to dig up a wood post that was set in concrete.
-
So with a minimal structure up top and 6 posts for a 12x22 structure, a beam all around the perimeter of the slab, I should be ok with an 8x8 flange bolted down and then make a cap out of treated for the flange and some 1X material around the square post.
Sorry Shawn, I missed that, but great minds think alike.
That will keep me from being detoured and rushed to sink some posts before the pool crew gets the hole in the ground and ready for the concrete deck crew.
I just need to make sure the beam they put in the slab is directly under the post locations.
-
like this (https://i.ytimg.com/vi/FbUJIdkiS9s/hqdefault.jpg)
-
Correct, move the holes out to the corners though....
-
exactly. Probably used epoxy like I did connecting the beams to the concrete pillars on the casita.
-
That would save lots of work and the bigger the footprint the better.
-
So got some more done on the hardie. Rest of the corners assembled and installed. Ripped hardie for the kick out on the first course on the remaining two sides and got the first course started.
Then sawed all the trim for the remaining windows and started trimming the windows. Got the first floor 3x3 kitchen window and the dormer window done. While I was on the dormer started working on the corner trim for the dormer and the final flashing/trim pieces for the metal roof where the roof intersects with the dormer. Trim work is tedious and slow, so when the trim is all done the planks will go quickly.
Today will focus on the remaining roof flashing/trim on the dormer and more trim work and then some planks under the porch and on the front of the house.
Need to order the shake shingle hardie for the dormer but I will do that last since it involves getting back up on the 12/12 roof
Progress pics to come.
-
Today, it seemed that I was making lots of mistakes. ruined a few pieces of hardie but then got in a rythem. Finished a few pieces of trim and then started on the gable end over the front porch.
Still have to finish the dormer and trim one last window on the back gable and then there's just planking the kitchen side and rear.
I had to stop on the underside of the porch until I get the soffit and hardi panel on the ceiling. Those hardie panels are about 73 pounds so I need to figure out a way to hoist them up and hold them so I can nail them to the ceiling of porch.
So far so good. Here is where I left it today
(https://uploads.tapatalk-cdn.com/20180121/f7c4e07a389e44fa751b3d0590d3a7fc.jpg)
-
Awfully nice looking guesthouse there Charles!
-
Here are some tricks on the ceiling hardi. Use H vinyl. Before sliding the piece into the h vinyl take a grinder to the hardi and make sure it will fit in the h vinyl. Usually the ends are mushroomed from the factory and they will not go in, just buzz around the perimeter and clean it up. Grind as fast as you can walk around it is all it takes. A heat gun helps massage the plastics if needed. That ceiling hardi is horrible to do with less than two guys. It is very flexible and breaks easily and is expensive. A 2x4 cut to ceiling height with a flat 3-4’ piece on the top can be used as a prop. It is almost impossible to do alone and have it look good. Without H vinyl the joints look wavy and the nails have a tendency to blow the edges out. Start with a chalk line for reference and mark it 4’1/2” from the beam or wall where you will be starting. If the first row is stair stepped the rest is more difficult.
Wish i was closer to your end of Texas. I would lend a hand.
Here is one i just did. Zoom in and you can see the h vinyl and how i staggered the joints. (https://uploads.tapatalk-cdn.com/20180122/5f2eb65b3dc5d4ef58e98e995c5e5c72.jpg)
(https://uploads.tapatalk-cdn.com/20180122/6034eccaa86718617fb20d5b7a570cc3.jpg)
-
Before starting mark every ceiling joist around the perimeter. These are hard to find when fighting the sheet. Then install your first piece. Nail 12” in from the edge and only nail the perimeter at the 8”-12” in from the edge making sure each nail is good. Do not nail the field. If it is deep it will pull through so add another fastener and adjust the guns depth driver. If it is shallow set it. Then before the next piece goes in install the h vinyl. Nailing 12” away from the edge will allow this piece to slide in. The h vinyl gets cut to about 4’ and a notch is made in the part that is tucked up in the material. This will allow the perpendicular row to fit without hitting the 4’ butt joint piece. Just keep going like this using the previous piece of h vinyl to help hold the next sheet. When you are done use a chalk line preferably white chalk or a non oil chalk and mark every joist row. This makes every fastener hit lumber and not blow a hole through the material. From here finish nailing the fields and also nail the edges.
-
What do you mean H?
Sent from my iPhone using Tapatalk
-
Heat transfer according to google.
Why are we trying to transfer heat on the porch? Should we not be blocking or deflecting ?
Sent from my iPhone using Tapatalk
-
Jared. Thanks. H is the profile of the trim. It provides a support from one panel to the next. Hadn’t thought of that Jared. I may call in some help.
Sent from my iPhone using Tapatalk
-
Yes, it is the profile. There are two different sizes. As far as i know it is the smaller of the two. The larger looks bad when installed as it hangs down. Just trim it with a razor knife and cut it with a circular saw. Do not cut it real cold this time of the year as it will crack. Warm it up if needed.
-
Good thing is that at just under 8 ft Deep I only have the 3 seams as the 4 panels meet
Sent from my iPhone using Tapatalk
-
Dave, I think framers and mechanics have similar brains. :embarrassed
Sent from my Pixel using Tapatalk
Still waiting for big brother to come and delete it. I noticed a bit ago a curse word gets deleted pretty fast
Sent from my iPhone using Tapatalk
:popcorn:
There’s actually a word swap function that we use.... that’s why it seems weird when somebody says bullshoot lol
Sent from my iPhone using Tapatalk
-
Dave, I think framers and mechanics have similar brains. :embarrassed
Sent from my Pixel using Tapatalk
Still waiting for big brother to come and delete it. I noticed a bit ago a curse word gets deleted pretty fast
Sent from my iPhone using Tapatalk
:popcorn:
There’s actually a word swap function that we use.... that’s why it seems weird when somebody says bullshoot lol
Sent from my iPhone using Tapatalk
Kyle,
Feel free to change that all up if you want.
I created out "Bad-word List" and made the automatic substitutions. Wasn't giving it all that much thought, and frankly the feature was really only for Shawn ;-)) and one or two others, so do with it as you may
-
I created out "Bad-word List" and made the automatic substitutions. Wasn't giving it all that much thought, and frankly the feature was really only for Shawn ;-)) and one or two others, so do with it as you may
Want me to REALLY test out that word swap feature?! It might decide to go AWOL...
-
crap
Sent from my iPhone using Tapatalk
-
Sh$t is now crap. I think if we could adjust this to my texting on my phone it could be a good thing.
Sent from my iPhone using Tapatalk
-
Sh$t is now crap. I think if we could adjust this to my texting on my phone it could be a good thing.
Sent from my iPhone using Tapatalk
That's funny...and pretty dang accurate some days I'd suggest too... :beercheers:
And would likely be a pretty good idea.
-
Not much car replace a well placed four letter word sometimes
Sent from my iPhone using Tapatalk
-
So true, but some just might be a bit over the wall.
-
They’re not cuss words, they’re sentence enhancers ;)
Sent from my iPhone using Tapatalk
-
Like racing strips on Honda’s? Just makes things sound better right?
Sent from my iPhone using Tapatalk
-
They’re not cuss words, they’re sentence enhancers ;)
Sent from my iPhone using Tapatalk
Elsewhere, true!
Here: The reason you can no longer access the site ;-)))
Hashtag: Banned
-
They’re not cuss words, they’re sentence enhancers ;)
Sent from my iPhone using Tapatalk
Elsewhere, true!
Here: The reason you can no longer access the site ;-)))
Hashtag: Banned
Well I certainly hope not! Enjoy all you knuckleheads too much! :D
Sent from my iPhone using Tapatalk
-
They’re not cuss words, they’re sentence enhancers ;)
Sent from my iPhone using Tapatalk
Elsewhere, true!
Here: The reason you can no longer access the site ;-)))
Hashtag: Banned
Well I certainly hope not! Enjoy all you knuckleheads too much! :D
Sent from my iPhone using Tapatalk
Send me a pm and I’ll share my log in and we can have double trouble
Sent from my iPhone using Tapatalk
-
Send me a pm and I’ll share my log in and we can have double trouble
Sent from my iPhone using Tapatalk
LOL... I don’t think that would work so well.
Sent from my iPhone using Tapatalk
-
Hashtag: Banned
So I've noticed something peculiar concerning Chief recently.
1. Acknowledged that he knows and listens(ed) to Beyonce songs.
2. Now wears an Apple smart watch, as opposed to a more sensible durable watch
3. Now uses the term "hashtag"
4. Trying to color-coordinate things down at the farm in colors other than OD green...
Something must be wrong.....
-
Hashtag: Banned
So I've noticed something peculiar concerning Chief recently.
1. Acknowledged that he knows and listens(ed) to Beyonce songs.
2. Now wears an Apple smart watch, as opposed to a more sensible durable watch
3. Now uses the term "hashtag"
4. Trying to color-coordinate things down at the farm in colors other than OD green...
Something must be wrong.....
What’s your prognosis doc? :popcorn:
I just assumed it was pilut stuff, maybe Duane could give us his input too?
-
Hashtag: Banned
So I've noticed something peculiar concerning Chief recently.
1. Acknowledged that he knows and listens(ed) to Beyonce songs.
2. Now wears an Apple smart watch, as opposed to a more sensible durable watch
3. Now uses the term "hashtag"
4. Trying to color-coordinate things down at the farm in colors other than OD green...
Something must be wrong.....
My theory is that this is the longest period of his life where he has been in the same place for multiple years in a row without the rigorous standards of the military over his head. He’s becoming re-domesticated. There’s also a few serious blows to the knoggin - most recently over the Dodge Demon incident that could have triggered a serious personality shift frequently associated with head trauma.
Serious
Oblivion to
Former self
Trauma
:laugh:
-
Boss wearing Apple watches and Nate driving Vdubs.... I wish there was something I could do. #Quitesadreally
Sent from my Pixel using Tapatalk
-
Has anyone looked this up in webMD?
Sent from my iPhone using Tapatalk
-
Boss wearing Apple watches and Nate driving Vdubs.... I wish there was something I could do. #Quitesadreally
Hey now, i still have the duramax!
Dont be hattin on the Fahrvergnügen now, cause i am sure you would be glad to have one as well......
-
Ok for the urgent purpose I used my best resources, I had the two year old tell me where they hurt as a relation to where don hurts
Eyes for the color coordination, wrist must be in pain from that watch and of course back pain from sitting in the chair in the basement while the boys do all the work and he writes poems about skid steer tractors
My findings
(https://uploads.tapatalk-cdn.com/20180127/dcdc491aae52666f0ec4f7dce5ba6381.jpg)(https://uploads.tapatalk-cdn.com/20180127/926c674b4788d5e4545f52221aebe2e9.jpg)
(https://uploads.tapatalk-cdn.com/20180127/6aa1064a390d200486b831e349932fd7.jpg)(https://uploads.tapatalk-cdn.com/20180127/5fcd5f37fb2fa3e385bebb447e677647.jpg)(https://uploads.tapatalk-cdn.com/20180127/3935985c2a7c8001342cceec189c64eb.jpg)(https://uploads.tapatalk-cdn.com/20180127/60fa85f81e93bcb25b8401652c41492e.jpg)(https://uploads.tapatalk-cdn.com/20180127/b8c43153901cdb717771929e82037dd9.jpg)(https://uploads.tapatalk-cdn.com/20180127/8ca2e6301ba3462aa9ba563e32a63639.jpg)
Max and my guess is methanol poison
With all the painting he has been doing? The water leak from the Chevy and who knows what could have been given the boss when he was knocked out from that hellcat demon comment.
Heaven only knows where the Apple watch thing came from. Could it be some type of tracking system from cnn for all of dons politically charged coffee rants? Maybe someone from “the other place” is trying to find out if #Square_D is finished?
How does the boss magically run over everything? Is this a trend.
Should I look up or add to the WebMD list forgetful?
Sent from my iPhone using Tapatalk
-
It could be this also (https://uploads.tapatalk-cdn.com/20180127/8fac184166411903925ad8a63633d603.jpg)(https://uploads.tapatalk-cdn.com/20180127/2336e25dcc0b3eb4384f8ff67097de6a.jpg)(https://uploads.tapatalk-cdn.com/20180127/ca7fdad6beaf5a7427cd1e46bb693314.jpg)
We could have a serious problem here men.
Sent from my iPhone using Tapatalk
-
Alright, DOT army, back at the casita this weekend. It’s rainy today so I’m working some electrical inside and on the porch. Got two gooseneck farm lights. One to go over the door and one over the window on the second floor. They’ll have those low watt Edison bulbs where you can see the elements. Then the porch has two small can lights and some outlets in the ceiling. Instead of ceiling fans I plan to get some wall mount oscillating fans that put out much more than ceiling fans. (https://uploads.tapatalk-cdn.com/20180127/61e997ccd1002c766416682a84f23c54.jpg)
(https://uploads.tapatalk-cdn.com/20180127/4058622456e375b2e8949357833f5f9d.jpg)
Sent from my iPhone using Tapatalk
-
Those fans will make a good mosquito repellant, as well as helping keep you comfortable after a hard day.
-
Do your lights have a light sensor on them? So they turn off and on automatically when the sun is out
Sent from my iPhone using Tapatalk
-
Hashtag: Banned
So I've noticed something peculiar concerning Chief recently.
1. Acknowledged that he knows and listens(ed) to Beyonce songs.
2. Now wears an Apple smart watch, as opposed to a more sensible durable watch
3. Now uses the term "hashtag"
4. Trying to color-coordinate things down at the farm in colors other than OD green...
Something must be wrong.....
My theory is that this is the longest period of his life where he has been in the same place for multiple years in a row without the rigorous standards of the military over his head. He’s becoming re-domesticated. There’s also a few serious blows to the knoggin - most recently over the Dodge Demon incident that could have triggered a serious personality shift frequently associated with head trauma.
Serious
Oblivion to
Former self
Trauma
:laugh:
First of all, I am obviously paying no attention to the Airborne SSGT...
Next, what the heck is wrong with a little color anyway??
Wife sez I need to get in touch with my feminine side! (Didn't know men had one!)
OK, as for being in the same place too long absence of incoming: Check! Its weird, I will admit
But I think that problem is about to fix itself.
And, there is nothing wrong with a little personality shift once in awhile
You people seem like a bunch of girls! Always noticin' how others are doing this or that!
Mind yer own bees wax, my daddy used to say. Not sure what that means, but he said it with authority, so it must apply
And, no I don't like the D__med watch. THing is either dead or malfunctioning. SO if any of you ever call, and I don't answer, the reason is about 40% I'm not movin' fast enough to get to my phone, and 60% because no matter how many buttons I push or how many times I do it, my tore up, hard as leather fingers can't make the tactile connection to actually answer the F__akin' call.
I can see how the well pedicured or manicured, or whatever procedure applies to girly-man hands can answer the phone, but the rest of we men cannot!
Rant over, CM...
-
Add denial to the webMD list
Sent from my iPhone using Tapatalk
-
Bring down dat ban hammer!!!!!!!!!
This has to be the ultimate DOT thread, ever. Sorry for my (small) part in this cluster, Tex.
-
Dave. I don’t plan on using photo cells. I don’t like to leave lights on for potential criminals when I’m not there.
Sent from my iPhone using Tapatalk
-
Oh, this was a build thread. lol
Sent from my iPad using Tapatalk
-
What about motion and timers? I don't like dusk-dawn either.
Motions take you off guard, add a timer and a camera here and there and you have mug shots of trespassers/targets.
-
Well I got 12 cans inside installed, the box for over the sink pendant light, most electrical boxes, the cans on the porch and electrical boxes in the ceiling of the porch. Started stringing some 14/2 and bought the 100 amp panel but where I wanted the panel to go on the inside it wouldnt fit between the two studs. So I'll be returning that and getting a panel for the outside. No big deal, except that it's double the cost. But then I'll put it closer to the front side corner so the amount of 3-3-3-5 cable will be about 12 foot less which will be about a wash since the cable is $5/ft.
JR I have a motion on the shop for when the wife arrives in the dark. She doesn't ever seem to have the flashlights I put in her car....
I may put a three way switch and run the traveller over to the porch on the main house or outdoor kitchen to allow for turning the lights on when moving from the house to the casita
Or I can have dusk/dawn led stair lights just to give enough light to see the steps in the dark.
We'll see. I'm making this stuff up as I go
-
(https://uploads.tapatalk-cdn.com/20180128/5b0ef78ca562711126b2d1707c59664f.jpg)
(https://uploads.tapatalk-cdn.com/20180128/1e92554f417026a09952f2276432fafe.jpg)
(https://uploads.tapatalk-cdn.com/20180128/c3b685e48dc08fa528d51bf5741321f9.jpg)
(https://uploads.tapatalk-cdn.com/20180128/55df5a3142e02bd1b93c4bb13d048430.jpg)
Need to string more wire but it was too
Nice a day to be working inside.
So I built stairs. Tired of making that one 26 inch step to the porch. Gets old when you are going in and out and in and out.
Once I get the cans wired I’ll probably run an extension cord to them so I can light them up and see better until I get the 100amp subpanel, water, and Ethernet run.
Sent from my iPhone using Tapatalk
-
Stair progress today. Did I mention I hate manual post hole diggers?
(https://uploads.tapatalk-cdn.com/20180128/1732b0a8f7dd5b30a0417b6303c51267.jpg)
(https://uploads.tapatalk-cdn.com/20180128/3f83b5f58a72f84a7869838ef03d3c99.jpg)
(https://uploads.tapatalk-cdn.com/20180128/ce008c6d1a18e12e66aad411795067be.jpg)
(https://uploads.tapatalk-cdn.com/20180128/5dac1c3800d2758f9736ed5f010371fa.jpg)
(https://uploads.tapatalk-cdn.com/20180128/8297ccec9be4c1111c4a3d63f87ac58a.jpg)
Still have to do some railing.
The brass stair gauges for my framing square worked like a charm.
Sent from my iPhone using Tapatalk
-
so are you going to use the pink roll fiberglass insulation or are you going to have it spray foam?
-
The main house is spray foam. The casita and the shipping container will both be spray foam as well. 18 seer two zone mini split and it will be very energy efficient.
Sent from my iPhone using Tapatalk
-
And here it is at the end of work day 52
(https://uploads.tapatalk-cdn.com/20180129/dc18f15c2b8399ac89c875eca3fc6d9e.jpg)
Sent from my iPhone using Tapatalk
-
IMPRESSIVE!
-
I agree, looking great!
-
So jared was right. Handling those 4x8 hardie panels is tough and I was unable to get them lifted into position on the ceiling of the porch. I put a cleat on the wall and tried to rest one end on that cleat and pivot the panel up. No dice. Too flimsy and risked breaking it in the middle.
So I think I'm going to build a rig that has 2 2x4s with hinges that gets temporarily screwed into the wall. Place the panel and pivot it up. Supported by the 2x4 it should be easier to get pivoted up and put another 2x4 underneath to hold it in place then I can nail it..
We shall see. Probably going to trench for power, water and ethernet soon to get that out of the way as I need to be able to work inside with some lighting.
-
I wish they would make a foam contoured for containers. They have got so popular it should be a no brainer. Of course spray foam is better, but $$$.
Getting ready to hook up my split. Just 15 ser single.
Looks good !
-
They do JR. It's stupid expensive.
https://insofast.com/products/container-inserts/
I can get spray foam for 1.25 sqft to fill 2x4 cavity, 1.40 to fill 2x6 cavity.
I plan to install studs (skinny side) in the recessed part of the corrugation and then bridge across the top with 2x4, in essence making a drop ceiling to install electrical and insulation.
I'll need a mini split that senses humidity and find a way to introduce a small amount of fresh air as it will be a big Styrofoam cooler
Looking for ideas on how to attach the studs to the steel container. thought about drilling and screwing from the outside but that would be about 100 holes.
-
They do JR. It's stupid expensive.
https://insofast.com/products/container-inserts/
I can get spray foam for 1.25 sqft to fill 2x4 cavity, 1.40 to fill 2x6 cavity.
I plan to install studs (skinny side) in the recessed part of the corrugation and then bridge across the top with 2x4, in essence making a drop ceiling to install electrical and insulation.
I'll need a mini split that senses humidity and find a way to introduce a small amount of fresh air as it will be a big Styrofoam cooler
Looking for ideas on how to attach the studs to the steel container. thought about drilling and screwing from the outside but that would be about 100 holes.
If you have a few minutes this evening, i can give you a call and explain how i did it in afghanistan?
-
Will do Nate.
Sent from my iPhone using Tapatalk
-
An air powered drill will knock out a 100 holes in no time flat if you have enough air to power it, just a thought.
-
Would there be anything against just using some contractors adhesive?
Sent from my iPhone using Tapatalk
-
They make a hilti anchor for direct on steel.
Not sure on what all types of fastener options.
The speed of the shot fuses the anchor to the steel.
Used a lot for electrical straps on steel beams.
What I don't know is if there is a stud that's long enough to go through a board.
-
Could you use the walls for supporting the roof, then add self tappers from the top if additional support needed?
Sent from my Pixel using Tapatalk
-
I think the idea of breaking the outside layer of steel defeats the entire purpose! Do you really want holes in the sides and roof? :facepalm:
-
No different than steel on pole barn......
-
I can live with holes in the side and put sealant over them. I won’t put holes in the roof. Walls will support inner roof. Just need to make sure wall studs are secure as I will be sheathing the inside in plywood and attaching shelves etc.
Sent from my iPhone using Tapatalk
-
Oh, Charles I misread. I thought you were looking for a way to mount studs to the roof..my bad.
Sent from my Pixel using Tapatalk
-
here yah go charles
-
here is the site where that pic came from.........
http://www.bergco.com/conex.html
-
You could weld bolts to the walls on the inside and than drill holes in the studs to bolt them to the walls. Maybe countersink the nut so it doesn’t interfere with the drywall
Sent from my iPhone using Tapatalk
-
Why not just use body pulling studs to the walls? No holes and cheap enough. Drill holes to match, bend the ends over and still glue them on.
I like the insert there. Wouldn't really be that hard to cut foam. Cut the angle and you flip for the other side, then a sheet across the top. Just need a BIG can of glue!
-
JR, he said "skinny" side, so the bolt/stud would have to be over 3-1/2"+ long. ...at least that's what I got from it.
I think that no matter how you mount them, a couple of those semi trailer spreader bars might come in handy.
-
I’m thinking that I may wedge and glue the studs, and then use Simpson hangers to hold the roof joists vertical to gain more strength and a deeper insulation cavity. Will start mocking some stuff up soon
Sent from my iPhone using Tapatalk
-
Ok. Yesterday I cleared a few cedars to make room for the outdoor kitchen slab. Moved my construction materials out of the way. Moved the firewood rack and started marking off underground obstructions for the big dig.
(https://uploads.tapatalk-cdn.com/20180203/df9acdcc9af0e9f9b9d69d300a881f42.jpg)
So this morning I got back to working on the hardie. I’m determined to get the ceiling panels up. After some thought I came up with a jig.
(https://uploads.tapatalk-cdn.com/20180203/321a12938a1a6f3dca81e402efaa1516.jpg)
Some door hinges and 2x4s and a small angle bracket to hold the panel when vertical.... and then voila!
(https://uploads.tapatalk-cdn.com/20180203/79a3613588a8890fc3c11c3927cd3bfa.jpg)
Walk it up the ladder and screw in a stop to hold it.
(https://uploads.tapatalk-cdn.com/20180203/c2af1d818f26d26337363aa4691a5fc6.jpg)
(https://uploads.tapatalk-cdn.com/20180203/569154e31d40407d4eeee3724896b313.jpg)
Sent from my iPhone using Tapatalk
-
great way to hold them in place Charles :likebutton:
-
Nice Jig Charles, you gunna name that jig? :tongue:
-
Clever! I would have said rent a drywall hoist, but this was practically free!
Sent from my iPhone using Tapatalk
-
Very smart
-
And here is where I left it today. Grilling some chicken for lunch with the parents and sister tomorrow.
(https://uploads.tapatalk-cdn.com/20180203/71ebaa5eda7c66b884bfe92bd81270d9.jpg)
Got the inside of the porch completely trimmed out and now just need to cut the last 3 rows of siding to finish.
Then I’ll finish the outside of the porch. Soffit got done today so all that is left is the trim on the beam and to cut a panel to cover the side piece.
Sent from my iPhone using Tapatalk
-
(https://uploads.tapatalk-cdn.com/20180203/d3ff5443265d4719f6515d88f2ac5b98.jpg)
Sent from my iPhone using Tapatalk
-
Looks great Charles, per usual.
Sent from my Pixel using Tapatalk
-
Yep, great job. Just curious, sheetrock outside and not the green stuff?
-
It’s hardi
Sent from my iPhone using Tapatalk
-
It’s hardi
Sent from my iPhone using Tapatalk
Missed that! :embarrassed:
-
Nice Jig Charles, you gunna name that jig? :tongue:
Hmmm...patent pending...ROH3
Redneck One Handed Hardi Hanger
-
Well got some fuel capability added to the spa/hide....
(https://uploads.tapatalk-cdn.com/20180206/e16a1846e80569092ea1f4727127672e.jpg)
(https://uploads.tapatalk-cdn.com/20180206/e02f929b1113db39f06527bbd200d999.jpg)
Sent from my iPhone using Tapatalk
-
1k?
-
No. The 500 was $900 and they wanted like $2600 for a 1k. I told them I’d add another 500 later.
Sent from my iPhone using Tapatalk
-
Pool got marked on the ground today. The big dig commences 0800 tomorrow. They are going to excavate for my utilities to the casita while they are at it.
Sent from my iPhone using Tapatalk
-
Oh and I’m going to go ahead and have them pour a walkway and hardscape for the fire pit. Well basically they are destroying mine and building all new pit with matching flagstone. SMH. I’m going to get kicked out of the neighborhood for not being redneck enough.
Sent from my iPhone using Tapatalk
-
No. The 500 was $900 and they wanted like $2600 for a 1k. I told them I’d add another 500 later.
Sent from my iPhone using Tapatalk
Copy, also if you ever need to move them my skid loader & mf4609 would both pick a 500 full. They were both maxed out but it was doable.....
-
I think my Kubota would pick it up empty but I'm struggling to justify a bigger tractor until I get either parcel on the north or east of me...or both. Not to mention, did I mention I just paid for a pool? SMH.... I hope I don't have to move it. Its pretty strategically located. central to the house, shop, casita and outdoor kitchen.
If I add a second would you just tee the lines together and draw from both? I'm running a 10PSI regulator on it and will step it down at each point of use, eg. backup gen, pool heater, outdoor kitchen...
-
Wow, a pool....So who gets to keep it clean. Every needle, twig, creepy crawler in the county will be in it if it is an outdoor model. I like the idea of two 500 gal tanks, regulators do fail and that pool better be warm for the family.
-
Charles,
Like ALL you do: top notch! Quality doesn’t exclude you from Redneck STATUS! That’s about attitude and not intelligence. My students ask me if I’m a redneck and I don’t feel it’s an insult, rather a compliment regarding my attitude and convictions!
-
As ususal Bob, all maintenance falls to me.....
Mike, that was a tongue in cheek statement for sure....No one can take away my redneck card....Its my license plate....
As I see it, being a redneck is a homage to a simpler time where integrity and values mattered more than material possessions and other worldly trappings.......
-
Well even if the duty falls on you, it will be a nice place for the family to relax and enjoy the Hide. You have been doing a great job fixing up the place, thanks for sharing...Keep the fires under control...
-
Charles, double check with your local pane dealer but I ran a line from each tank outlet into a T. Then on that T I had a regulator as it went towards house actually my regulator on tanks was large enough to supply two separate lines that went into my house at two different locations. At each location going into house I had another regulator.
-
Not trying to be negative, but a pool heater will burn through that tank like a ford burning fuel on flat ground...at least that's the feedback I've received from friends (yes my wife is trying to get me to go down the same path...I've been fighting her off for about 6 years now)
-
Could you plumb a second heat source and use wood boiler to keep the temp right. My friend in WA uses a wood stove with coils as an only heat source for his pool.
-
Solar heater would do the trick, and free
-
I keep forgetting about solar being from wet side of Washington.
-
(https://uploads.tapatalk-cdn.com/20180207/2eb00cdd9f6bc9ee90c5a775772035eb.jpg)
(https://uploads.tapatalk-cdn.com/20180207/205574a56b9170d7d0e38e5b7f8e2e87.jpg)
Snap. No turning back now.
I don’t plan to heat the entire pool just the hot tub. But we’ll see what drain that has on the tank. Too many woods right now for solar but every tree that drops leaves in the pool may find a sudden demise.
Sent from my iPhone using Tapatalk
-
What about a wood boiler for the hot tub? How often will you be at the site? Not like you have to heat it all the time anyway right? I don't know how fast it would come up to temp but that might be doable.
Please looks really great Charles!
-
Any bet takers on the sat dish cable getting cut? :tongue:
-
^^^^ :beercheers:
For a moment I thought Don may have driven the Kobelco down from the tuck!
-
Any bet takers on the sat dish cable getting cut? :tongue:
Since I buried it I knew it was going to be a casualty.
Just so happened to be the very first bite when they yanked the cedar stump out by the porch.
Sent from my iPhone using Tapatalk
-
Any bet takers on the sat dish cable getting cut? :tongue:
Since I buried it I knew it was going to be a casualty.
Just so happened to be the very first bite when they yanked the cedar stump out by the porch.
Sent from my iPhone using Tapatalk
Lol, sorry.......
-
No damage when things tore loose I hope. It had to be moved anyway right...Don't want it under that nice pool.
-
How come that thing will just pop a cedar stump out, and I’ve gotta dig all around it with my tractor?
Looks like it’s going to be a real nice layout, I’m not letting my wife look at this thread.
-
^^^^ :beercheers:
For a moment I thought Don may have driven the Kobelco down from the tuck!
Wonder how long that would take???
In "rabbit" mode I think it only does like 3 mph
-
Hole is finished. Rebar crew in it. Plumbing tomorrow, Gunnite tomorrow or friday. (https://uploads.tapatalk-cdn.com/20180207/52a3c18944ba22de9513885cbb500ba0.jpg)
Sent from my iPhone using Tapatalk
-
Wow these guys are fast. (https://uploads.tapatalk-cdn.com/20180207/a7953641216b27fbad3b6cbcd4116053.jpg)
Ready for plumbing and gunnite
Sent from my iPhone using Tapatalk
-
If you had known they worked that fast you would have negotiated better.... :popcorn:
-
When they were the only company willing to come this far, I was negotiating with myself.....
-
That will be really nice when its done!
-
They are working fast. How come cement vs FG?
I have solar for my pool and it was all diy. Got everything off CL. Works great but you need about the same area in panels as pool sf.
I have a heater but have yet to install, just to get it ready earlier in the year and extend a few weeks.
-
Would like more intel on the solar.
I debated FG for a long time and ultimately the ability to get warranty work and some stated issues with finish along with very few people willing to work with us this far out, I chose I local company that has been building pools, under the same name, for nearly 40 years.
-
Nice looking pool/cabana house in the background
Sent from my iPhone using Tapatalk
-
Where's the rough-in for the duck blind?
-
Where's the rough-in for the duck blind?
He just covers the spa
-
Solar is easy. I find used panels fro around $50, new they are about $200 on ebay. I like the roof but any sunny area is fine.
Tap into the filter inlet and I run a small 110v pump on a timer. The pool pump will work too, but that costs a lot more.
-
Looks good Tex. If you cut all the trees that drop stuff into the pool you will have lots of room for solar.
-
Sorry Tex but I had to laugh. All of this time I thought the house (shed) you have been building was your primary dwelling. I thought you also had a shop / garage there also as a stand alone. Then you were going to bring in containers for storage and gun/re loading room. Then I see the pictures of the actual house next to the pool and then the light bulb goes off that you have a retirement house there and the rest is all add on's.
Very nice!
When I lived in NJ I had a very large pool and heated with Natural Gas. No spa but the wife likes 80 degree plus water or she won't go in. That thing cost me about $1000 a month to heat 5 months of the year. Plus another $1000 a month in electrical for the two pumps and 26 stations of sprinklers. I was always looking for a pool heater that was the type that floated on top of the water when you were not using it. Tons of lilly pads and other floaty types but I wanted one where you could hook up the return water line from the pump to it, it then circulates the return water through a series of dark floating pads and then returns the water back into the pool after it heats up.
Similar to these but instead they would be like air mattresses with water flowing through rather than air. Scale able to whatever size of pool you had.
https://youtu.be/bUZd_fAQnQk
Thank god I'm in Minnesota now where you don't need a pool. (sarc)
-
I just realized I never posted the original house photo.
(https://uploads.tapatalk-cdn.com/20180209/6af6e6ab4a5ac29ed46788f0457e1ce7.jpg)
The day we closed.
Throwback Thursday.
Sent from my iPhone using Tapatalk
-
Nice getaway place, or even a main home for that matter. I really like the covered porches and the metal roofing. Once you get all that grass on the side of the house turned into a pool the mowing time will be reduced....
-
With the dually lurking in the background...
Sent from my iPhone using Tapatalk
-
The pool decking will mirror the full width of the house with the decking matching up to the porches on the front and back. Then when they do the decking in flagstone they'll also cover the porches in flagstone to match. The outdoor kitchen will be a 14x24 slab, also covered in flagstone, angled and centered between the main house and the casita to form a kind of arc of buildings that look out over the pond.
They'll tie the kitchen to the pool with a walkway and on the far side of the pool they'll pour a walkway and 18ft diameter area for a 6ft diameter fire pit.
Its going to rain some this weekend so I'm hoping they get gunnite shot today. Then hopefully I can get back to wrapping up hardie or wiring electrical.
-
Obviously, watching this and all of the threads, I have to say I expected better of the men here
What we have here is a bit of disorganization
Yes- Sadly
But, True!
A military leader spends a lot of his time training his men to be able to take over in the absence of something. Someone gets hurt, the next highest ranking guy steps in for hopefully what is a seamless transition.
Others, seeing need, takes action. No fortifications down on the high speed avenue of approach into your logger, and some NCO will tell some private to set a machine gun to over-watch it, then set about making sure he is supported as well
I have tried to build that into you, "People." I would have expected that from most of you, (Excepting the "Salt lake City kid" of course, but the rest of you have shown yourselves to be somewhat disciplined and focused.
Charles here is building a pool, a rather dangerous and complex and expensive undertaking, I think we can all agree.
And where is the oversight, I ask? Anything organized...anywhere?
No just things from the SLC kid like, "Can I come and play!"
There should have been some of you who organized into the "Construction committee" Self starters who would have seen the need to get involved to provide the quality information Charles needs to build this thing. And much the same as you have done with me with the building of SquareD, that counsel should arrive well after the decision was made, the concrete is in the ground and all thoughts of that phase had vanished...like that!
I'm disappointed
And what of those (none of you) who are knowledgeable about laws rules, laws, regulations, and things of this sort, where are you I ask? There should have been something to advise Charles of all the things he has to consider which would constitute guidance. Information coming from JR's unregulated state, common pool practices from Sam and those in Minnesota, and some HOA member. Matters not that none of that is accurate, the effort should have been made and there should be a "committee of crap-house lawyers."
But its not here...Sad, really
Where are the psychologists who know everything there is to know about the mind of a woman who might have given good advice to Charles on how this all fits into his marriage (Of which you know absolutely nothing?), where are you. We should have seen a mental health advisory committee form somewhere populated with guys like Phil. I mean if he can land a rocket going like ten thousand miles an hour that way, back here a few minutes later, figuring out a woman's mind should be child's play.
Everyone with me here?
I had hundreds of "Tips and advice" when building square D from peeps who wouldn't know a mig welder from an enema. I had paint experts commenting who were color blind, or just plain blind. I had 14 year old kids telling me about what they thought about how the military tires I selected would hold up. I even had a lieutenant comment about something, but I tossed that out years ago.
Lets get organized, lets get our brain power engaged, and lets get this man the quality help this web site is well known to provide
Move out!
-
HAHAHAHAHA...........
Someone's up early and probably had a bit too much coffee since he cant be havin none for none for a while anyways, or possibly in to the pre op drugs a little early.......
Or he migh be boo boo lipped that we havent D.O.T'd this one up like he thinks we did with square d.........HAHAHAHAHAHAHAHA
-
HAHAHAHAHA...........
Someone's up early and probably had a bit too much coffee since he cant be havin none for none for a while anyways, or possibly in to the pre op drugs a little early.......
Or he migh be boo boo lipped that we havent D.O.T'd this one up like he thinks we did with square d.........HAHAHAHAHAHAHAHA
Oh, what you all did (Do) to the SquareD thread is well documented
Causes me ptsd (Pressure n' tension started delusions!)
-
So if I read the earlier rant correctly, Don wants us to make this into such an audaciously huge project that it isn’t going to end well. Sorry to break it to you, Don. He did that just by starting to dig a hole for a pool. But if it makes you feel any better, I’ll give it a shot:
Instead of just adding a pool, put a hot tub on the side of it. Darn it, already done.
Oh, I know. You should put a flagstone surround and a huge fire pit and walkway, then redo your porches with said flagstone too. Dang it, he beat me to it.
Sorry to say it, but I think he’s already chosen to do all the really big add ons already. I’ll keep looking though.
-
I think the difference is Charles has not built a tac topper yet (yep I just went there). Add in the fact the biggest injury we have witnessed him commit is a smashed thumb (was yours the motorcycle wheelie accident or the fire in the house?). Anyhow either way I guess what I’m
saying is we are giving him quite a bit more lead way than you Don! :popcorn:
Add to the fact you did nothing but complain about all our DOT efforts of the past & here we are, you even managed to run my second in command of DOT efforts off (Ashley) and I was left with Ken who has become a turncoat with Charles now diligently contributing to the chaos we work so hard to keep up here. :facepalm:
But hey, good luck with that surgery!
-
I seem to remember something about don openly admitting his testing of the concrete hardness in his garage with his head and back.........
-
I seem to remember something about don openly admitting his testing of the concrete hardness in his garage with his head and back.........
Yeah, I think it’s a toss up at this point!
-
...So you're sayin I'm gettin no support here? :rolleyes:
-
...So you're sayin I'm gettin no support here? :rolleyes:
Quite the opposite, we give you a ton of support. It’s Charles that’s getting left out on the support! :knucklehead:
-
Not to mention that just saying we can’t DOT up his thread is in itself DOTing up his thread. :facepalm:
-
"Hey guys here's a pic of the house we boug..."
-
If it weren’t for the labels, I would have thought that was Hillary’s political career.
-
Now Don, I did ask where the duck blind was and JR already mentioned brushing in the hot tub. Have you considered that since Charles isn’t a pilot, he’s used to the concept of nobody else is going to service his abused equipment and therefore avoids using his slide rule as a hammer? Now, granted YOU fix whatever you break and mostly on your own, but you still need to master the art of Broke Stuff avoidance. You know.....how to avoid BS!
Heavenly Father, guide Don’s surgeons and restore your servant to health in rapid fashion so he may continue to serve you .......... AND entertain the DOT Army you’ve placed in his life!
In Jesus name, Amen!
-
Tate, you forgot to mark SD parked over to the right there,,,,,,,,,,,,,
Don, know whats in a woman's mind? :facepalm:
Is this from the hospital? On meds?
-
:popcorn
mistakes abound. I assure you the pool, guest house and outdoor kitchen, when finished, will have cost more than the main house.....
Oh and not even a rocket scientist can decipher the mind of a woman....
-
Here are some pics the wife sent. (https://uploads.tapatalk-cdn.com/20180209/a18c75ebda369870bda9d7b61de10142.jpg)
(https://uploads.tapatalk-cdn.com/20180209/110879b6dc85a18f1bfafbb4fd859eb6.jpg)
(https://uploads.tapatalk-cdn.com/20180209/fbbf08623e2e8097cbf7d3ed896fc1ba.jpg)
(https://uploads.tapatalk-cdn.com/20180209/785da25e45d1d66e668b38d919076028.jpg)
Sent from my iPhone using Tapatalk
-
:popcorn
mistakes abound. I assure you the pool, guest house and outdoor kitchen, when finished, will have cost more than the main house.....
Oh and not even a rocket scientist can decipher the mind of a woman....
Ah I believe we have one of those; Phil? any comment?
-
Who is the “salt lake city kid”?
I feel hurt. I wouldn’t drive to Texas to swim a pool full of Lilly pads and a duck blind. A little to redneck for my type
Sent from my iPhone using Tapatalk
-
(https://uploads.tapatalk-cdn.com/20180210/6f4bfac948d3666431033898df98ac82.jpg)
(https://uploads.tapatalk-cdn.com/20180210/85c0ebf5868d8dbbf7a24698d2b96bdb.jpg)
(https://uploads.tapatalk-cdn.com/20180210/fc95a1dfe41b22d79a8f4d98f6ba987a.jpg)
Today I ran a temporary satellite cable to restore tv. Then started clearing the porches in advance of the flatwork. Empty shipping container came in handy. Also straightened up the shop a bit and am either going to hang some hardie or work inside on the electrical at the casita.
Sent from my iPhone using Tapatalk
-
Tate, you forgot to mark SD parked over to the right there,,,,,,,,,,,,,
Don, know whats in a woman's mind? :facepalm:
Is this from the hospital? On meds?
Its from the TBR procedure I think, I'm workin' on a new make-up base, leave me be, you're always criticizing and picking on me!
-
Just some input for ya is all. We all want to see SD run!
TRN, whens the pool party?
-
About mid March me thinks
Sent from my iPhone using Tapatalk
-
Went back to hanging a little hardie and got the 100 amp sub panel hung and hole cut to the inside of the house to run romex. Silicone sealed around the conduit running inside the house and across the top of the panel where it meets the house.
(https://uploads.tapatalk-cdn.com/20180211/918fe44fe1ed4601d91806ed08c5b664.jpg)
Sent from my iPhone using Tapatalk
-
What colors are you planing on putting on the exterior? Your getting close to finish paint the exterior
Sent from my iPhone using Tapatalk
-
I wish I had dirt like that at my place.
Those guys sure kicked butt on that pool. Nice design.
Sent from my Pixel using Tapatalk
-
Wish I was moving as fast as you. This DIY really slows you down sometimes.
-
Looking good Charles, what's the finish plan for the interior surface of the pool, tile?
-
Thanks guys. Really starting to take shape. Boss lady is still debating exterior color. It will match the house. The question is whether I get to paint both the house and casita or just the casita to match the current color on the house. She wants to wait until the pool is in to see the color of the flagstone to make that call.
Pool will be pebble sheen finish. She’s still debating the color on that and has to make a decision in the next week or so. She likes the dark colors but since the pool is shallow she is concerned about it being too hot.
Ken that “dirt” is pure red clay. Good thing is there aren’t any real rocks to contend with.
Temp is 30 degrees cooler than yesterday and the wind is blowing. Looks like I’ll wire some circuits indoors today
Sent from my iPhone using Tapatalk
-
For the color, you have to do some planning. First find the color you really want (but don't tell her). Then start looking at camo designs.....leave brochures around with pictures. Then say you made your decision and tell her that as this is a bug out place you want to keep everything hush hush and quiet so you then show her the camo design so that it won't easily be seen from the air. After she calms down say "well we could do this color....." (the one you wanted to begin with). She'll be do happy you're not going with a camo design she'll say yes.
Lemme know how that works out. Haha.
-
Thanks Wilbur, I didn't want to take the #666 post. :)
Tex, the dirt at my place, and my brother's which is were I'm working now, is straight up powder. It won't compact, nor absorb water. Really difficult to work with... actually extremely difficult, and it goes down between 3 and 6 feet before hitting Az clay/concrete. Not sure if Tex red clay is better, but it looks nice. Lol
Sent from my Pixel using Tapatalk
-
Had to pave the way for ya Ken! ;)
-
You got it anyway. Must be the common core.
-
Well, worked on some wiring yesterday. Stupid cold and humid yesterday. The thing about Texas cold is near freezing and 70% humidity and a light wind.....I'd rather it be 20 and no humidity and no wind.
I've run electrical many times but this is the first time that I've had to plan circuits and execute from scratch. Keep getting into analysis paralysis, but as with most things it will be over engineered. Electrical is where I am most critical of builders not planning ahead like location of swithes, 3 way circuits, planning for undercabinet lighting, floor recepticles, etc. If I miss one I'll kick myself forever.
Keeping to NEC code standards is pretty complicated and not always common sense. Bathroom has to have a dedicated 20amp GFCI, but can power other bathrooms, but not any fixtures outside the bathroom, but can't power other bathrooms if you put the bathrooms lighting fixtures on it and then the fixtures can only be a certain wattage....
Plus you have to have a dedicated circuit for the refrigerator....plus a 120v outlet within 25ft of the AC unit not downstream of equipment cut off.
Yadi yadi yadi.....
Pics later....
-
Good luck but i think youre smart to plan it all out before you start pulling any wire. Do you have a friend you can send them to for a check to make sure you haven't missed anything?
I don't get what some places do so diagrams can be key. My FIL had tripped a GFCI on an outside outlet in his mfd house. None of the outside outlets had the reset. Fortunately the paperwork provided to him included a full wiring diagram, the reset was in a wall outlet in the MBR....um what? Thank God for the diagram, but no rhyme or reason to my way of thinking. Course I'm no electrician.....and I don't play one on TV. Ha
-
I’ve never planned out a whole house, plenty of single runs here or there in homes & shops. I agree I think making a diagram and planning is just the right thing to do.
-
When we did out remodel I planned/ ran new wires for the hole house. Just make it make sense when you do it really isn't that hard. Being a smaller dwelling it shouldn't be to complicated. For where I live and doing a remodel I didn't have to have anything inspected so I didn't need to worry to much about the odd requirements. Just making sure everything is safe etc.. I did have a licensed electrician friend at work that I was able to run stuff past/ ask questions which was nice.
Don't try and split stuff up into to many circuits though. They will quickly add up and fill up the box.
-
we used to have an electrical guy named Darren around here, but he hasn't been on since dec 2016......want me to reach out to him for you Charles?
-
Thanks guys. No need Nate I have a EE friend with a master electrician license that I can have look at it. I have a 20/40 circuit 100 amp panel so I’m ok being somewhat conservative. And will still have room to run the outdoor kitchen off that panel and leave room for future expansion. I think I’ll end up around 10 circuits.
Sent from my iPhone using Tapatalk
-
Not much going on this week with rain off and on all week. Some dirt work happened yesterday in prep for flatwork. Electrical and some coping work might get done today. (https://uploads.tapatalk-cdn.com/20180214/3972e8e83e6a9475a93e58fa6081e12f.jpeg)
(https://uploads.tapatalk-cdn.com/20180214/9a9188bd81394e95b7952273b053ec5f.jpeg)
(https://uploads.tapatalk-cdn.com/20180214/9ec0f067da558512601d4f4726cdef1d.jpeg)
Sent from my iPhone using Tapatalk
-
looks like that same nasty staining red dirt they got up there in south western oklahoma
-
For some reason I pictured the cabin out a little more.
-
Success! Pool holds water!
-
Success! CEE-ment pond holds water!
FIFY! :beercheers:
-
I can see the CTL track marks everywhere
That
s torture to me
Seeing that
Looking at my recovering knee
And knowing I own one which has never seen the first minute of dirt...
Killin me...
-
I can see the CTL track marks everywhere
That
s torture to me
Seeing that
Looking at my recovering knee
And knowing I own one which has never seen the first minute of dirt...
Killin me...
Well, on the bright side you haven’t broke anything on it or drove over anything orange with it yet. :popcorn:
-
Ha! Don you’ll get
Yours soon!
Some tile work got done today. Pics later.
Sent from my iPhone using Tapatalk
-
For some reason I pictured the cabin out a little more.
The plan is that the casita, the outdoor kitchen and the main house will form an arc of buildings that all face the cement pond...
-
Some tile work got started yesterday. (https://uploads.tapatalk-cdn.com/20180216/9687d59dff0def3c188a57d0240d9d45.jpeg)
(https://uploads.tapatalk-cdn.com/20180216/5fc84645a004b693225c621abcb93bfb.jpeg)
Sent from my iPhone using Tapatalk
-
VERY nice tiles and stone!
-
reminds me of a charred whiskey barrel, looks great.
-
Here a little more progress today. I came up to smoke some pork butts for a charity event tomorrow.
(https://uploads.tapatalk-cdn.com/20180217/095e91df952e4a088307e324fcf4b583.jpg)
(https://uploads.tapatalk-cdn.com/20180217/bbad10793d7ca68a30419cbed6774430.jpg)
Preview of final grade
Not as bad as I thought.
(https://uploads.tapatalk-cdn.com/20180217/670977ef8303e8bb5a4daca84477e538.jpg)
Sent from my iPhone using Tapatalk
-
How many gallons of water do you expect that to hold? What chemical set are you going to use to keep it clean?
Sent from my iPhone using Tapatalk
-
You and your wife have great taste. Looks good.
Sent from my Pixel using Tapatalk
-
:likebutton:
-
Dave, I'm going to guess about 20,000 gallons and it is a salt water pool.
Ken its all my wife. I can't take credit.
-
Been raining pretty consistently for a week. No progress on the pool. Did get some more wiring done. Bought a spool of #1 AL wire to run the sub panel. Rated 110 amps which will do fine for my 100amp panel. Just need to finish the conduit but it’s a mess outside. So I’m wiring circuits indoors.
Feeder wire
(https://uploads.tapatalk-cdn.com/20180224/20cf0d6cc0e51abfe14ecebe929cf529.jpg)
Ground bars since sub panels need local ground. Will ground locally with 8ft rod and #4 copper
(https://uploads.tapatalk-cdn.com/20180224/bfa36614a4a09be37d1bf219fd8fa87d.jpg)
NOT UL approved. Have an extension cord wired to the panel for now just so I can use the lights and outlets. Note the jumper from common to ground since I’m using the ground back at the main panel via the extension cord
(https://uploads.tapatalk-cdn.com/20180224/3d47faec4085b2f38a40db6ae2f2d420.jpg)
There’s a lot of wire in that small kitchen. Got a wall up where the little fridge will sit.
(https://uploads.tapatalk-cdn.com/20180224/e29c685bdd004cf470eb088ac7005b04.jpg)
The two orange wires are 10ga to feed dual 28gal water heaters. One in series with the other. Will run just one unless girls have a few friends over.
Sent from my iPhone using Tapatalk
-
Dried up a couple of days. Forms down for decking, fire pit and kitchen.
(https://uploads.tapatalk-cdn.com/20180302/7710c5bc66195be77f4caea33b8436af.jpeg)
(https://uploads.tapatalk-cdn.com/20180302/b6e0ec6295e45333e20b527b6fba0024.jpeg)
Should pour tomorrow and lay stone next week.
Sent from my iPhone using Tapatalk
-
With the water heaters. Are you going to plumb a by-pass around the second one that will only get occasional use. Then just turn it on and turn a couple valves when you want to use it? Why not a tankless set-up? I know I was advised against it for the home water heater when we were remodeling the house but it seems like it would be fine for something like this.
-
Bear, no bypass. From what I can tell, just running them in serioes (hot from the first into the cold of the second) is good enough and will allow me just to flip the breaker when I need more water. If I ran in parallel I would need a bypass set up to isolate the non working heater when running only one.
I have tankless at the city house and I'm tired of the girls taking 45 minute showers. This way, they learn what its like to run out of hot water so they can take a 10 minute shower.
-
After a little more thought I can see how it could work. Maybe I am interpreting what you wrote wrong, but would you want the heater that is "off" to be the first in line, and the heater that is always "on" second. This way you are drawing cold water from the first water heater to be heated in the second, and not dumping hot water from the first water heater into the cold second one.
I had not considered that "perk" of a standard tank water heater before. Maybe just stick with the single heater then. The summer we lived in a camper I was surprised how long the little 10 gallon heater would last.
-
Shouldn’t that wire bed be elevated 2” or so?
-
Shouldn’t that wire bed be elevated 2” or so?
It should be but on small pours such as that it’s not uncommon to drop a few piles then lift the wire up as you continue the pour.
-
Looking good!
Not to DOT this thread up, but what tankless water heater do you have in your home? We're making that final decision in the next few days and any insight would be appreciated. You can respond over on my house thread if you don't want to muddy this one up.
-
I would have thought tankless too. Maybe add a timer to it?
And whats wrong with a 45 min shower? :beercheers:
-
JR, on septic a 45 min shower is no bueno
Don I have a Norritz. Works great going on 10 years. Only issue was an igniter. Fixed it myself and cost me $12
I would check with local plumbing supply houses. I found that there is usually a regional preference and you want what ever is most prevelant in your area so that parts and service familiarity work in your favor. There are several good brands like Rennai and Bosch and Norritz etc
Sent from my iPhone using Tapatalk
-
Looking good!
Not to DOT this thread up, but what tankless water heater do you have in your home? We're making that final decision in the next few days and any insight would be appreciated. You can respond over on my house thread if you don't want to muddy this one up.
Made that same choice for tankless. After all dad is usually the last one to shower, I am done with cold showers.
Most research and friends I know that have them say about $30 saved on the bill. However you have to yell at kids as Tex refers to.
Sent from my iPhone using Tapatalk
-
Local supply house and plumber pointed us toward Bosch. Hot showers are something I'm looking forward to again!
-
Well a lot got done on the pool today.
(https://uploads.tapatalk-cdn.com/20180302/55bcb83d82eb069499424e2ecdbd5f41.jpg)
(https://uploads.tapatalk-cdn.com/20180302/725b06ebbe30f11b24471789df987e99.jpg)
(https://uploads.tapatalk-cdn.com/20180302/e9756eaa676da608cca2c631f55cc2f9.jpg)
(https://uploads.tapatalk-cdn.com/20180302/6397ad8eeef2093985587fd6a4a780eb.jpg)
Sent from my iPhone using Tapatalk
-
Very nice Charles
-
Thanks Shawn. They should start the overlay with the flagstone next week.
-
Real purdy TRN. Gettin done just in time for the heat to hit!
Sent from my iPad using Tapatalk
-
Am I seeing a heli-pad for my MD-530 in the foreground??
-
It kinda looks like that doesn’t Don? It’s where the fire pit is going. It’s only 18ft in diameter. Probably bigger than some places you’ve put a chinook
Sent from my iPhone using Tapatalk
-
Really looks nice, ties it all together.
-
What is the third area of concrete for? Is that the outdoor kitchen area?
Sent from my iPhone using Tapatalk
-
the rectangle piece between the casita and the main house is the 14x24 outdoor kitchen slab
-
It kinda looks like that doesn’t Don? It’s where the fire pit is going. It’s only 18ft in diameter. Probably bigger than some places you’ve put a chinook
Sent from my iPhone using Tapatalk
Man, a Hook takes up a lot of real estate...Unless you're talking about doing a aft wheel landing and hanging the forward gear in the breeze. Then, ya, it has been on some tidy little spots in the world.
-
So how's it feel having your own personal resort? :beercheers:
-
VERY nice there Charles! Is the PVC on Don’s landing pad for drainage or gas feed? The other question is, if you’re burning wood, and a pyro like I am, won’t the concrete spall and crack from heating and cooling cycle?
-
Not there yet Ken. Hopefully by the middle of summer the casita will be done and I can actually enjoy all this.
Mike the pipe is a landing beacon for Don
It’s actually a drain. They will be lining it with fire brick all around so I think that will take care of the cracking issue. They do a lot of them and this time for a change I’m just writing a check.
Sent from my iPhone using Tapatalk
-
Dang that will be nice when it's done. Congrats!! Really great forethought in this. So when it's done I think ya need a RMTS "break in" get together. I'll bring some pig and bourbon!
-
Might not be a bad idea.
Got some hardie done today.
(https://uploads.tapatalk-cdn.com/20180304/f643db7c59a35c917e46c418c61a7892.jpg)
Sent from my iPhone using Tapatalk
-
Not there yet Ken. Hopefully by the middle of summer the casita will be done and I can actually enjoy all this.
Mike the pipe is a landing beacon for Don
It’s actually a drain. They will be lining it with fire brick all around so I think that will take care of the cracking issue. They do a lot of them and this time for a change I’m just writing a check.
Sent from my iPhone using Tapatalk
FYI, I look for an IR Strobe. Anything else is either the wrong landing pad, or someone shootin' at me!
-
On second thought, I'll just use the top of the connex if its OK with you Tex...
-
Either one Don. I have a Surefire IR strobe, just tell me where you want it. Connex is between some tall trees, so we may want to put you on the pond berm......
-
Dang that will be nice when it's done. Congrats!! Really great forethought in this. So when it's done I think ya need a RMTS "break in" get together. I'll bring some pig and bourbon!
Reminds me of the shed scene in Caddy Shack - got a pond and a pool.....the pond would be good for you! LOL!
-
well I dang sure aint sitting in a hot tub full of men.......
-
Ah, come on buddy, don't become a JH.
(Jacuzzi Hermit)
Sent from my Pixel using Tapatalk
-
well I'd rather sit with you all than Hildebeast.....
-
I will second that!
-
Poor Ken and these tough decisions....... :huh:
:popcorn:
-
Either one Don. I have a Surefire IR strobe, just tell me where you want it. Connex is between some tall trees, so we may want to put you on the pond berm......
Yea...I've hit my share of pine trees with Bell and Boeing rotor blades in my lifetime!
-
Well slowly but surely.
(https://uploads.tapatalk-cdn.com/20180309/29ef6b7893306abdb644d78a0344fbd3.jpg)
(https://uploads.tapatalk-cdn.com/20180309/9b5ab011fda20e54c604d00e9351f3bb.jpg)
Sent from my iPhone using Tapatalk
-
Total class there Charles!
-
Total class there Charles!
^^^^^^ agreed
-
Thank you sirs. My kids better get a scholarship
Sent from my iPhone using Tapatalk
-
That is sweet!!
-
Tomorrow I’ll pull the #1 AL cable from the main panel to the sub panel and the casita will be running on it own power. 100 amp breaker.
Btw. After careful consideration I will probably use a 3.5gpm norritz tankless heater with a 15 minute timer on the ignition circuit. 15 minutes of bliss and then.....ice cold.
Sent from my iPhone using Tapatalk
-
That is really nice RN
-
When we are done. I will have room for 8 to have their own bed. Then maybe an RV hookup. Might have to have a RM reunion.
Sent from my iPhone using Tapatalk
-
When we are done. I will have room for 8 to have their own bed. Then maybe an RV hookup. Might have to have a RM reunion.
Sent from my iPhone using Tapatalk
And a helo pad/landing area...No hook up required!
-
Looking very nice man. Our hide sight looks like a tent LoL
-
When we are done. I will have room for 8 to have their own bed. Then maybe an RV hookup. Might have to have a RM reunion.
Sent from my iPhone using Tapatalk
And a helo pad/landing area...No hook up required!
You let me know when you are headed this way and I’ll give you the grid coordinates. I can pop smoke on your approach.
Sent from my iPhone using Tapatalk
-
When we are done. I will have room for 8 to have their own bed. Then maybe an RV hookup. Might have to have a RM reunion.
Sent from my iPhone using Tapatalk
And a helo pad/landing area...No hook up required!
You let me know when you are headed this way and I’ll give you the grid coordinates. I can pop smoke on your approach.
Sent from my iPhone using Tapatalk
Won't need it...I'll be on ya before you can dim the lights...
-
Because Vampire. I forgot.
Sent from my iPhone using Tapatalk
-
(https://uploads.tapatalk-cdn.com/20180310/fbb6ef973b693ea59fa50d6fac8a170c.jpg)
(https://uploads.tapatalk-cdn.com/20180310/fcfd1c64fa1c38fd8096ecd93b396006.jpg)
100 amp. Casita running under own power.
Sent from my iPhone using Tapatalk
-
1 of those boxes goes to the casita, where is the other one?!
-
Maybe the main panel from the house?
-
Lol. Yup the main panel the main house. 100 amp breaker bottom right. Runs #1 AL to the 100 amp sub panel.
Crazy to have a 200 amp panel on the main house when it’s only 1550 sq ft but I’m glad they did. Plenty of room to run sub panels for shop and guest house and pool. And eventually the shipping container
The guest house will never pull more than about 40 amps if everything runs at once. Main house may draw 65-70 with AC and Oven both on. Pool may draw 30 and the shop won’t run more than 10 unless the welder is going.
Sent from my iPhone using Tapatalk
-
I have the same, a 1650sf house with a 200main and 100 sub to the garage.
-
More flagstone down and some grouted.
(https://uploads.tapatalk-cdn.com/20180313/75820f970af9cde2c4b71845a24e9562.jpg)
(https://uploads.tapatalk-cdn.com/20180313/a1c58758fcf8fcb2bf941d2d41da953b.jpg)
(https://uploads.tapatalk-cdn.com/20180313/61ebae00eea0f93a0745fb5ba30e1194.jpg)
Sent from my iPhone using Tapatalk
-
So what goes down in between the stone Tex? What holds them in place? Weed control? Slip and falling on a sharp corner?
Sent from my iPhone using Tapatalk
-
So there is a 4 inch slab. Then mortar the flagstone and then mortar between the stones to finish. It’s just an overlay like tile but a lot thicker.
Sent from my iPhone using Tapatalk
-
I was picturing just on sand and pouring sand in between the stones,
Sent from my iPhone using Tapatalk
-
Got a little more done. Last side before getting the shingle hardie to finish the dormer.
(https://uploads.tapatalk-cdn.com/20180315/f097e73267384161044a722f6127baf2.jpg)
Sent from my iPhone using Tapatalk
-
Charles, is this building you are doing for the landscape/pool guy/security quarters for the mansion in the woods you call a hide site? Sure is coming together nice.
-
Bob, its a multi purpose building.
For the kids as they have friends over. Potentially a parents/in law quarters as they get older, and potentially a caretaker in my own old age.....
Or for me when my wife and girls are just to much to bear.....
-
I think I knew that, just jabbing a bit. The place sure is looking good, I think the pool is going to be a bear to keep clean but there are machines and/or people that can do a good job when you get tired of trying to keep up.
-
I think I knew that, just jabbing a bit. The place sure is looking good, I think the pool is going to be a bear to keep clean but there are machines and/or people that can do a good job when you get tired of trying to keep up.
With a self-cleaner/robot and daily pH testing, keeping a pool clean is fairly simple......let it get outta whack and it requires a couple days of more steady attention to get back on course, but not horrible.....spend the money on the robot!
-
Mike thanks for that. It’ll have the Polaris cleaner and will be a salt water pool. Any advice there?
Sent from my iPhone using Tapatalk
-
Forgot about that salt thing........stock up on blocks of salt?.....good for deer season too! No experience with that other than keep a good stock of oranges around to get that taste outta your mouth upon exit? :grin:
-
(https://uploads.tapatalk-cdn.com/20180316/e5957c0c94ca2995865d3e1640562c67.jpg)
Backside done.
Few pieces under porch and then the dormer to go
Sent from my iPhone using Tapatalk
-
Wow you do have a nice back side, I mean, quite a large back side, I mean....oh nevermind
Sent from my Pixel using Tapatalk
-
Mike thanks for that. It’ll have the Polaris cleaner and will be a salt water pool. Any advice there?
Sent from my iPhone using Tapatalk
TRN, We had a very large saline pool when we lived in NJ and it was the easiest to keep maintenance on it. We rarely had to add salt because the evaporation only takes out the H2O and not salt. You could hardly tell it was salt water but kept the crud out. We ran the pumps about three hours a day. We had a Polaris also like this.
It worked easy also. We also had many trees and it took care of all of it.
I think you are in good shape!
-
Mine is salt water also. I like to keep it covered so it stays really warm!
I have the same style sweeper, but the pump needs new bearings.
-
Well onward and upward!
Hardie shingles for the dormer. I should have reconsidered. Those things are expensive. That little architectural touch set me back $650 more than just putting the planks on it.
(https://uploads.tapatalk-cdn.com/20180316/6b6606946c8c7a4a0b52e3c129ae0d19.jpg)
Sent from my iPhone using Tapatalk
-
Well finished up the porch today. Not a very productive day but now I need to calk the front side. That will leave me with just the dormer to finish
(https://uploads.tapatalk-cdn.com/20180316/72710849d46526dea7e97c7c0f841a9d.jpg)
(https://uploads.tapatalk-cdn.com/20180316/aebf1b4897712e96ed2c82fea99ebd5d.jpg)
Then i hosed off the outdoor kitchen. So much pollen and dust. It looks much better. Will probably want to seal it.
(https://uploads.tapatalk-cdn.com/20180316/5583c4b701587b0449cfa078c7043af4.jpg)
Sent from my iPhone using Tapatalk
-
Looks great!
-
Looks great!
:like
Sent from my Pixel using Tapatalk
-
Today was a slow day. Mom and dad decided to pay a visit. So I drove to the feed store and bought plants for the garden. I harvested spinach, lettuce and turnip greens today and planted three different types of tomatoes, hatch chili, Goliath jalapenos, regular jalapenos, zuchini, bell pepper, cucumber, basil, and cilantro.
went to lunch with the parents for burgers.
Then i cleaned the shop a bit and moved firewood with the youngest. cleaned the pine needles off the roof and out of the gutter, burned all that stuff i blew in a pile. Smoked some chicken legs,
Watching Ferris Bullers day off with kids. I figure they are old enough now to watch it.
-
https://www.google.com/amp/s/thehomestead.guru/companion-planting-2/amp/
Take a look at this link charles
-
Interesting Nate. Thanks.
BTW, you never notice how much foul language is in an old classic movie until you watch it with your kids
Sent from my iPhone using Tapatalk
-
what movie were you watching?
-
I watched ol Smokey and the bandit with my boy one day. It was much the same way, we had a language time and place conversation
Sent from my iPhone using Tapatalk
-
what movie were you watching?
Ferris Bueller’s Day Off
Sent from my iPhone using Tapatalk
-
what movie were you watching?
Ferris Bueller’s Day Off
Sent from my iPhone using Tapatalk
Classic, foul language yes but unfortunately it is a part of society
-
Yeah, we lead by example. My children have never heard that language out of my mouth
OK menses.
Need advice. Have a 8700lb high cube shipping container sitting on RR ties, one at each end. Need to move it back 3 ft. Have trees behind it. gravel in front. Don't think I can push it with the dually because it would spin on gravel and the tractor just digs a hole with the wheels.
I thought about putting two 4 ton cable pullers, one on each corner and tensioning it to the trees and then if it doesnt move, give it a shove with the tractor or the dually
Any advice on how to move this thing that I have not thought of?
-
That's the way I would do it, or, use a high lift to put some pipe on the ties...it would break friction and possibly give it just enough momentum to go 3 feet.
-
Like Ken, if the cable pullers don't work, set up rollers under it and roll it into place. I moved a shed with 4 inch pipe rolling on 6x8 timbers, hardest part was trying to stop it before it ran into the apple tree which actually stopped it.
-
I was thinking that I would be worried about stopping with the pipe rollers as well Bob.
Looking good TRN those shakes get pricey fast. The trim pack for our house cost more than the siding. It all adds to the look as well as the bill.
-
I was just thinking rollers on the 2 timbers..the pipes would fall after it starts moving
Sent from my Pixel using Tapatalk
-
Snatch block off each corner to two separate trees one either side of container, truck pulling one & tractor pulling the other. I would think it would move it that way as your splitting the load in half then multiplying the force with the blocks.
-
I can't say, just nudge it with the new SVL-95...Sorry...
-
Yeah. I need one of those.
Maybe I’ll sell the tractor.
Sent from my iPhone using Tapatalk
-
Ok so last night we had big rain. Today I cleaned up in the shop, changed the oil in the HH6 minivan. Test fit some 2x4s in the shipping container. (https://uploads.tapatalk-cdn.com/20180319/d48fbca864aad7bfca5bd09af2e3a519.jpg)Bible study about charismatics. Cleaned up outside some misc junk. Then moved a stack of firewood to a new location and cut up 5 cedar trees and stacked them up. And cut two small cedars near the pool.
Hope they get this thing done this week. (https://uploads.tapatalk-cdn.com/20180319/24b6c0d080e9c9f7a43002947560e481.jpg)
Found this big ass tarantula lurking on the side of the pool. (https://uploads.tapatalk-cdn.com/20180319/1ad5911ae9d2acc7cb35951bc5904944.jpg)
Sent from my iPhone using Tapatalk
-
Four inch pipes.
We move all kinds of stuff on them.
As long as the ground is reasonably flat two will do.
Depending on grade, you could push it with a golf cart.
-
Are you saying your scared of spiders....he may just be thirsty and was lookin for a drink
-
If you do use the trees to help move the thing put something between the chain or cable and the tree to protect the bark from tearing.
-
If you do use the trees to help move the thing put something between the chain or cable and the tree to protect the bark from tearing.
6” wide x 10 foot long lifting strap ie tree savers are what we use when winching
-
Are you saying your scared of spiders....he may just be thirsty and was lookin for a drink
Spiders scare me more than snakes. Especially ones that measure more than 3.5 inches across. Nothing good has that many legs.
My wife made me promise not to kill it. I wanted to take the flamethrower to it.
Sent from my iPhone using Tapatalk
-
Yeah. I need one of those.
Maybe I’ll sell the tractor.
Sent from my iPhone using Tapatalk
Keep the tractor
But there is a point to be made here
A CTL and possibly a wheeled loader can do almost everything a tractor can do.
I'd say if you were just starting, as in punching into raw land, then by all means get 75-95HP CTL with the attachments you need. It will clear land, create flat spaces, dig basements and cut in roads. It can hoist heavy stuff like a bridge beam is you're unlucky enough to have to build that, and it can spread gravel.
But when you get the place where you can drive back and are starting to shift from raw clearing to building sone nice things, then a tractor is the right choice.
So: for planning...Starting out?? CTL
Ben there for awhile and have a place to live: Tractor
-
Yeah Don, it only took you 5 years to take your own advice (and there might have been a few of us pushing that direction). :)
-
Yeah Don, it only took you 5 years to take your own advice (and there might have been a few of us pushing that direction). :)
If I dropped that kind of coin on something like this back then you would have been saying, "Now when was Don killed? Was it four or has it been five years now???
-
Haha. Nah, we would've thought it was standard Don procedure. :cool:
-
Little more progress.
Fire pit cut down and topsoil spread and more flagstone delivered. Flagstone should be done tomorrow and pebbletec shot next weekend.
About to try out the fire pit
(https://uploads.tapatalk-cdn.com/20180323/a6c7ce56d43da74c45a2954147a03904.jpg)
Sent from my iPhone using Tapatalk
-
Inaugural Fire
Feel all uppity with a real firepit and a crystal glass.
(Don’t tell anyone. I’ll have to change my license plate. )
Sent from my iPhone using Tapatalk(https://uploads.tapatalk-cdn.com/20180324/d5551a2da967dd4302ae2abe097375e8.jpg)
-
Sneakers to add
Sent from my iPhone using Tapatalk
-
what you don't like my Saloman's?
-
Didn’t say I liked or disliked, just noted they are not boots like a name like Tex lol implies
Sent from my iPhone using Tapatalk
-
TexasSnootyTooty..
....nah, doesn't roll off the tongue the same
-
Hey I’m all for comfortable footwear. You won’t hear a peep out of me in that regards. I wore leather work boots in a steel shop for close to twenty years, seven days a week and now I sport merrell’s from slip ons to sandles year around. Just be aware Ken likes to throw hippy accusations around like it’s his full time job for such things.
-
Ha Ken. I’ve seen your palatial patio and fire pit
Sent from my iPhone using Tapatalk
-
But you haven't seen me holding crystal while sporting purdy shoes. :tongue:
-
(https://uploads.tapatalk-cdn.com/20180324/b7991be680276453896b2751f3945d75.jpg)
It’s just a shoe.
As for the glass, I have no excuse.
Now back to hanging hardy
Sent from my iPhone using Tapatalk
-
Check out hoka’s, I bought a set on the recommendation of a couple of neighbors. When I was jogging my left hip and knee were hurting and it was limiting my runs. So I finally dropped the money on a set (don’t buy anything less then the $120 version I was told) they are amazing. Feels like I’m walking and running on a cloud of air, I run with no joint pain (only doing a mile or two currently).
-
Does the pit have propane or NG or is it straight up??
Reason, I am about to level a section of ground (Read: Add dirt up to level, and it would be a great time to lay in the gas lines for a propane initiating device to get things cookin'
-
Just firebrick lined concrete with dry stack mortared to the outside and flagstone on top. No propane, just a center drain to relieve it of water. I do have a big weed burner I used to start fires
-
I just purchased these on sale (https://uploads.tapatalk-cdn.com/20180324/0ac959502502bf54698fb239af6494bf.jpg)(https://uploads.tapatalk-cdn.com/20180324/8875f30553e1171043b63772d763abea.jpg)
Wore them on our March today. Maybe four miles. But I needs some shoes to frame houses in so these should do the trick for walking walls.
I have owned some of your brand shoes and liked them a good bit. Mine were convertible to fold the back heal down and use as slippers. Took me to the Grand Canyon twice on the same shoe
Sent from my iPhone using Tapatalk
-
Well. If I had to do over again I’d just run hardi plank all the way. This stuff is a pain.
Almost 8 hours to do this one side.
Just the two dormer sides to go and those will probably be worse.
(https://uploads.tapatalk-cdn.com/20180325/2b27ba86062b5f1f6667308d41463fc6.jpg)
(https://uploads.tapatalk-cdn.com/20180325/0c723529aa96125a55e408c199c1f010.jpg)
Sent from my iPhone using Tapatalk
-
Looks good Tex. Yeah the sides won’t be fun having to work from the slope of the roof.
Sent from my iPhone using Tapatalk
-
I like the dark window in there, are you going to give the shakes a boarder between the two styles?
Sent from my iPhone using Tapatalk
-
Dave, my wife asked the same thing. I could have trimmed all the tabs even at the bottom but decided against it and just leave it like it is. I reckon at least 40-50 trips up the ladder today at 20ft. Legs are feeling it but the whiskey is helping....
-
Anyone wanna take bets till the boss sends Tex back up the ladder? Lol
Sent from my iPhone using Tapatalk
-
That looks good and I like the uneven break on the bottom.
Those shoes looks nice Dave. I got some other shoes from them but my feet are giving me issues, may have to go custom.
-
What part of your feet Jr? I was having issues with my arches. Like can’t stand up bad. Did some calf stretches And helped a bunch
Sent from my iPhone using Tapatalk
-
My arches are screwed, the whole foot hurts when I walk for awhile. Told I have bad circulation too.
-
Try some calf raises for kicks.
Sent from my iPhone using Tapatalk
-
Do you have proper orthotics (arch supports)? They can make all the difference in the world.
Sent from my iPhone using Tapatalk
-
Tried all the crap, never helped. Going to do PT on the right knee next week, got better, now bad again.
-
Well the sides went much quicker than I thought, even with the compound angles where the pieces hit the 45 degree roof and the 4/12 soffit.
I finally stopped advertising for Lowe’s. 6 months from start of framing to complete shell. Just have the front side to finish caulking and then paint.
(https://uploads.tapatalk-cdn.com/20180325/9d450d8cc3adac12d19d877802b4c5fe.jpg)
(https://uploads.tapatalk-cdn.com/20180325/42e887ad4e90e5266ee61ccc892a4bfc.jpg)
(https://uploads.tapatalk-cdn.com/20180325/3d7c0ea84241c3d7b7bd5e340b730288.jpg)
Sent from my iPhone using Tapatalk
-
That looks good, really good. Now just the inside!
As much as I use Lowes, HD seems to have more of what I need right now.
-
In my neighborhood HD is where most of The illegals hang out.
Wife needs to pick pant colors. I Suspect I’m painting both the casita and main house.
Sent from my iPhone using Tapatalk
-
Those poor guys are only looking for a days work...Give them a break, isn't that what the USA is all about????? While my son was in the brush business, it was the circle K to find day labor.
-
Don’t mind them as much as them leaving trash everywhere. It’s just a junky store compared to Lowe’s.
Sent from my iPhone using Tapatalk
-
If you can find anyone inside,,,,,,,,,,,,
Remember the Jarad has the paint deal at HD.
-
I've always been a big fan of Sherwin Williams Duration. I'm open to use other paint, but paint is like tires. No sense being penny wise and pound foolish.
-
I painted for years and years, I like duration and super paint from sherms. I don’t buy anything else.
Sent from my iPhone using Tapatalk
-
Bought some grass
(https://uploads.tapatalk-cdn.com/20180326/0050b0070ee384ff06656323ab6a8d7b.jpg)
Sent from my iPhone using Tapatalk
-
Now you need to drive over to Home Depot and hire some help....
-
Bought some grass
(https://uploads.tapatalk-cdn.com/20180326/0050b0070ee384ff06656323ab6a8d7b.jpg)
Sent from my iPhone using Tapatalk
Charles, that phrase means a whole different thing here in hippy land.... :facepalm:
-
Yeah. Went to the Royal Gorge a few years ago and there were teens with their parents wearing pot leaf t shirts saying “my money grows on trees”
Sent from my iPhone using Tapatalk
-
Yeah. Went to the Royal Gorge a few years ago and there were teens with their parents wearing pot leaf t shirts saying “my money grows on trees”
Sent from my iPhone using Tapatalk
RG is neat, you ride the train?
We moved here just south of boulder in early June of 15 into an apartment. So first holiday the 4th we drove up to boulder and went to pearl st. (Neat brick paved street with trees planted down the middle & you walk it). So we’re walking down pearl st and they have entertainers (guys juggling flaming sticks & music people etc). It’s about supper time and we see this little ny style deli with glass windows you can people watch from. Right below via and outside stairs I notice there is a pot shop in the basement as we walk into the deli. So we’re sitting there and my oldest Baylee who was 13 sees a panhandler on the corner with a sign. It says “why lie, I need drugs” so our first real experience in the hippy culture. So as we’re eating I’m watching the stair well. All age groups & socioeconomic backgrounds coming and going. After 15 minutes someone comes up with a little brown bag and hands it to the panhandler. I guess what surprised me the most was the police walking the beat, they just glanced at the guy and kept going.
-
Rode the train and did the zip line across.
What a rush.
https://youtu.be/hQG6D_6lTVc
Sent from my iPhone using Tapatalk
-
One day while flying out of Peterson AFB in Springs, we were up on El-Magre a 12,700 foot mountain, which is kind of behind NORAD, the taller one to the right. We were doing ridge top landings which is a fun thing to do. Anyway afterward, with a lot of fuel still remaining we had a choice, go up to Leadville and land there at the highest airport in the US, or down to Royal Gorge to fly under the bridge...
We went south
Got to the bridge and was circling it and trying to figure out if there were cables or the like under that bridge, but couldn't... Anyway, I'm sure that as long as we poked around there someone had us on video...A video which would have clearly shown a special operations Armee helicopter, which most folks were denying actually existed at the time...
Funny, but we didn't get in trouble for that one, because of all the noise abatement complaints coming from the good people of Colorado Springs, bless their socialist hearts!
-
Laid some sod
(https://uploads.tapatalk-cdn.com/20180327/4410a81c30334108eb2cf500aa36387f.jpg)
Found my little friend. He had an unfortunate accident and lost a leg to the landscape rake since I didn’t see him in the dirt.
(https://uploads.tapatalk-cdn.com/20180327/ea8a3ab2a2ca8d75c536d4b8ce32c43e.jpg)
They cleaned the pool out to get it ready for pebble tec Thursday. (Hopefully) and start to fill it Friday.
Last of the flagstone going down today.
-
that looks really really good
-
Rabbits just love grass!! Is there a plan between them and the hogs?
-
Rabbits just love grass!! Is there a plan between them and the hogs?
Story I heard Tex was buying goats, think he’s planning on using em as bait....... :popcorn:
-
One word
Cabrito
Sent from my iPhone using Tapatalk
-
One word
Cabrito
Sent from my iPhone using Tapatalk
Nate sent me to some business version of Costco in downtown Denver. So I go there because he told me they had bone in butts for sale there (price was ok but not great) & then I saw the halal goat carcass for sale & left without any meat.......
-
The grass really set off the whole area. Excellente'
-
One word
Cabrito
Sent from my iPhone using Tapatalk
Nate sent me to some business version of Costco in downtown Denver. So I go there because he told me they had bone in butts for sale there (price was ok but not great) & then I saw the halal goat carcass for sale & left without any meat.......
was that costco business?
-
One word
Cabrito
Sent from my iPhone using Tapatalk
Nate sent me to some business version of Costco in downtown Denver. So I go there because he told me they had bone in butts for sale there (price was ok but not great) & then I saw the halal goat carcass for sale & left without any meat.......
was that costco business?
It was, glad you put me on to it for other stuff regardless. The halal crap freaks me out a bit, I've read about that process.......... https://www.barnhardt.biz/2015/04/12/notes-on-food/ granted she loses me on the catholic thing much but she usually is pretty factual otherwise.
as such I refuse to buy anything halal, granted I doubt the butts were from the same processor obviously.
-
So off to the right of the picture is where they have all the pallets of stone and their trailer and mortar mixer and where the gunnite/pebbletec truck will land. That will require more grass. I figure another 6 pallets. Since they weight 2500 each I can only haul about 2 1/2 at a time on my trailer since it has 3500# axles and no trailer brakes.
Sent from my iPhone using Tapatalk
-
(https://uploads.tapatalk-cdn.com/20180328/6f444c6c224d472dad4a8baace03c64a.jpg)
Sent from my iPhone using Tapatalk
-
Lookin good....
-
Isn't the rules of trailer ownership that if it fits it ships. Such as if you can fit 5 pallets it should go?
-
I see the lawn chair awaits another visit.
-
The most weight i ever towed with my 2500 was four pallets of wet sod. The last pallet could not be pushed in far enough so it was even with the edge of the trailer. I told the guy loading me it looked heavy. He said each pallet was 2000 pounds. I pulled that trailer through the Texas hill country and it swayed a ton. In fact i had to keep hitting the trailer brake switch to straighten the trailer out. When i got where i was going the trailer brakes were smoking. I returned for more pallets and had the owner loading me this time. He said that guy was wrong on the estimated weight. Each pallet was just over 4000 pounds because it had recently rained and the sod was much wetter than usual.
We have guys sitting out by Ace Hardware that are illegals looking for work. I have never used them. I believe we need borders and hiring these guys only drives them harder to be here illegally and gives them money to stay. I have heard they all run about $15 per hour. Lunch is also required and cash is at the end of each day. I will say that there are tons of Americans here with families paying taxes and obeying the law that will work just as hard for that same money.
I had a friend from high school working for me for years. I had his SS number and filed the necessary reports. One day i get a call from the Texas Workforce Commission and get an audit. His number was invalid and he was illegal. I never knew that. I got fined and had to pay more tax on that one. I was told that if i ever get caught again paying illegals on payroll or through contract labor i would receive their highest penalty because i had been warned. They were not messing around at all. This was around 07 or 08. I am still to small to be required to E verify but that process has helped identify fake numbers. IMO hiring daily help is a good way to get high schoolers involved and excited about work and earning pay. It also builds work ethic which is needed more and more these days.
-
Yikes, I don't think Charles would allow any illegal close to his place. My comment was tongue in cheek, yours is well taken however. Although, I will say those guys do work in some areas where it is very hard to find a legal person to preform the tasks.
-
As far as a two axle tag trailer I once had close to 18k on a 12k trailer. Fort Wayne to KC, MO 6 tires later......
On a 25k deck over gooseneck we had it over 35k, 5 mile trip to scrap yard no tires blown
Can’t recall the 28k flat bed trucks but we loaded them heavy routinely.
Then DOT got their crap together & it wasn’t as much fun...... :tongue:
-
I used to work as a mech for a sod company. We went around the scales all the time out of Hemet Ca. (suburb but gone now)
Almost all the hires were illegal but I was just an employee too and worked next to them when mech work was slow.
We loaded trailers all the time to 120k and it showed!
-
Illegal immigrants are a tough subject. You feel for the ones trying to make a better life but we are either a nation of laws or we aren’t.
Republicans (as opposed to conservatives) want cheap labor and Democrats want cheap votes
I don’t mind paying $40 for my lawn to be mowed. Saving $10 by hiring illegals is not worth it.
Get in line, immigrate legally, learn English
Studies show speaking English in the US as an immigrant will double your earnings
Sent from my iPhone using Tapatalk
-
Agree Charles.
.. and it's not the same as 20 years ago. Those guys are charging full price around here, or they work for a contractor that charges full price, then they send all the tax free money back home, spending very little here.
Sent from my Pixel using Tapatalk
-
Yep, no reason they have to teach in 100 other languages. Fast tract to english I understand.
Keep thinking on using some for a couple things, but would rather hire a couple HS students to get their feet wet. There are so many illegals where my kids go to school, they think its normal. When asked how I feel I warn them you are not going to like what I say, but I say it.
If I where in their shoes though I am sure I would do the same, we all want better!
We have a city and a county here in Kali who are fighting back this this stupid santuary crap, Orange ( my birth place!!!) and Los Alomitas. Hammer down AG!!!
-
Had a bit of a run-in with some (likely) illegal lawn care workers yesterday morning. I live on a culdesac, and you can barely fit 3 cars wide across the end of the street. They show up to take care of some yards and park 2 trucks, one on each side of the street. One of these trucks has a trailer full of bark mulch with a gate that swings open, over a foot into the remaining lane of travel. I had to squeeze through very slowly, dodging the gate. I laid on the horn for a few seconds to make my disapproval known. When I came back a few minutes later, one of the guys was at the trailer shoveling bark into a wheelbarrow, so I rolled down the window and said nicely “you need to park somewhere else because your gate is blocking the lane of travel” and then he responds with something in Spanish. So then I may have lost it a little bit on him. They think they own the place and it just pisses me off. Can’t wait to pull a Charles and get out of the city.
Sent from my iPhone using Tapatalk
-
Ryan I’m as deep in the middle of Houston as you can get and deal with that all the time. I live in a neighborhood that is undergoing gentrification (original homes built in the 40s that are being torn down. So we have construction all around and deal with the double parked contractors all the time.
I can teach you a few choice words in Spanish that might help
The weekend place is aspirational for when I punch out if the city
Sent from my iPhone using Tapatalk
-
You’re also a lot closer to the source... ;)
Sent from my iPhone using Tapatalk
-
Well today is an exciting day. Supposed to shoot Pebbltec today on the pool. Have a breakfast meeting, then I pick up a little more sod and head up to the house to watch. Should be filling the pool tomorrow....and the day after
-
So in my area we don’t have a bunch of pools. Swim season is short or something like that. But the guy up the street has always filled his pool from the fire hydrant. What will you use as a water source?
Sent from my iPhone using Tapatalk
-
Pebbletec done and another pallet of sod down and mowed.
(https://uploads.tapatalk-cdn.com/20180331/c4f18a880e4456178682d0e9aede4b65.jpg)
Tomorrow they acid wash and start
To fill
Sent from my iPhone using Tapatalk
-
Nice.
How are they filling it?
-
Water hoses
Sent from my iPhone using Tapatalk
-
Water hoses
Sent from my iPhone using Tapatalk
This guy.....lol
-
Dumb question dumb answer right? Lol
Sent from my iPhone using Tapatalk
-
No I’m in the middle of nowhere. So two garden hoses and the pool fill is all I can do
In the mean time last fire
Of the season.
(https://uploads.tapatalk-cdn.com/20180331/73e9a99e5a74a0c3cb5755019d8dc3df.jpg)
Sent from my iPhone using Tapatalk
-
Why is this the last fire of the season?
Sent from my iPhone using Tapatalk
-
Pool looks great. Can't be that warm yet for no more fires?
-
Sounds like he might be heading back to the concrete forest for a while, to pay for the pool.
Sent from my Pixel using Tapatalk
-
No kidding,Ken.
It really is getting that warm here. Lows have been in the 70 range, highs in mid 80s
We just got a little cold snap and it was 52 last night
Sent from my iPhone using Tapatalk
-
Charles, what did you go with for a pool water heater? We used solar water heaters on the roof to help with the community pool heater. Poor installation or winterizing resulted in freeze damage so we now only use the propane heater. The solar didn't work all that well up North with the trees and so many cloudy days, but they did help.
-
Solar works great here and no real freezing issues, just a quick frost now and then. If you have the sun, go for it! Plus you can run at night to cool down too.
-
Heating is like a gazillion BTU propane heater.
Filling about 6-7 inches every 3 hours.
Kids are getting impatient
(https://uploads.tapatalk-cdn.com/20180401/0896e5d729fa3267ac1a378a19a9c680.jpg)
Sent from my iPhone using Tapatalk
-
Is it ready yet? :tongue:
-
I want one...I want one...I want one
-
Pool party at Charles house. Nate bring the meat, I’ll bring asparagus to tell us if some one pees in the pool.
Sent from my iPhone using Tapatalk
-
Pool is full. Somewhere around 20 hours to fill. Filling the spa now.
(https://uploads.tapatalk-cdn.com/20180401/3a0474ce527f8fb84741ab9e1743a4a0.jpg)
Spa full now too
Sent from my iPhone using Tapatalk
-
As a semi famous fisherman once said, a million times, Booyah.
Sent from my Pixel using Tapatalk
-
Very nice, am betting heading back to work on Mondays just got a bit harder.
-
I ran a dedcated 3/4 line to mine. It tops off so fast it is scary.
Sure looks good, tying to get mine clean now, always had an algea issue. Ordered another set of filters.
-
Thanks guys. I have to say guys, the stone work was an arm and a leg but now that it’s done it was well worth it. The fire pit and the outdoor kitchen and porches all matching makes a huge difference.
I mulched the beds today (just to keep Don occupied) and power washed the shop front. Got a couple of rockers for the fire pit area but will probably get some Adirondack chairs and put the rockers on the porch of the casita.
They come tomorrow to pick up all the leftover stone and debris and put chemicals in the pool and start the pump
Also having the septic pumped tomorrow.
Making progress for sure. Gonna have dinner with the guy that built my house tomorrow and get the name of the plumber he uses. Probably going to just stroke a check to get the plumbing and sewer roughed in so I can get to insulation and Sheetrock sooner.
Sent from my iPhone using Tapatalk
-
I like how your rock turned out, weed free, smooth enough to walk on bare foot, doesn’t spread to be slippery when running around the pool edge.
Sent from my iPhone using Tapatalk
-
Very nice TRN. Nice place to look forward to spending time! :likebutton:
-
They came yesterday and removed all the debris and started up the pool and worked on some finishing details. Stone guy has to come back and mortar in the skimmer kids and raise up an area that’s holding a little water in the porch.
I’m also thinking about adding the automation equipment. I can see now that the wife won’t want to turn valves and flip switches. She’d rather have a remote control
(https://uploads.tapatalk-cdn.com/20180403/015a5cd630cdcfce0726c948a4b54cc5.jpg)
(https://uploads.tapatalk-cdn.com/20180403/967c572703cfb66a748c05ca073039fe.jpg)
(https://uploads.tapatalk-cdn.com/20180403/848fa0d466c5099149e2f7f4ca6be527.jpg)
Now I need about 6 more pallets of sod
Sent from my iPhone using Tapatalk
-
:likebutton: very nice
-
Which one of you moderators can fis the title of this thread?
I need someone to draw a solid line through the part that says "Hide site" as it clearly has evolved far, far beyond anything like that! ;-))
-
Well, if we start down that slippery slope Don then we would have to change the name on your thread to include something about extreme equipment testing or carnage or destroyer of worlds, you know something along those lines. :popcorn:
-
What do we change square D to? Dodge dust bucket?
Sent from my iPhone using Tapatalk
-
Wow. That escalated quickly.
Don I still have a shipping container. That counts for something, right? It’s emp proof....
Sent from my iPhone using Tapatalk
-
Looks good TRN. My kids love swimming at night with the led doing its thing.
Honestly, I would just get a good solar cover for the pool. It keeps the junk out, keeps the heat in and will help warm it up more than you think.
-
Well, if we start down that slippery slope Don then we would have to change the name on your thread to include something about extreme equipment testing or carnage or destroyer of worlds, you know something along those lines. :popcorn:
Hey, no one asked ya!
;-))
-
Wow. That escalated quickly.
Don I still have a shipping container. That counts for something, right? It’s emp proof....
Sent from my iPhone using Tapatalk
Definitely worth some points!
Until you plush it out and add a sound system, 50" flat screen and lounge chairs!
-
Charles.
This is amazing! Well done, ah that’s all I got.
-
Thanks Sam.
Decided to improve the ride quality of the dually.
(https://uploads.tapatalk-cdn.com/20180404/d92f18c154efb0e65e612b5619e3fa5e.jpg)
Sent from my iPhone using Tapatalk
-
Reminds me of my ex, wide hips and a whole bunch in the middle.
-
Reminds me of H, wide hips and a whole bunch in the middle.
FIFY
-
Who said she is an ex?
-
I just threw up a bit in my mouth
Sent from my iPhone using Tapatalk
-
Who said she is an ex?
I knew it! :knucklehead:
-
Oh Shawn, don’t defile Tex’s sweet ride like that!
Good thing H isn’t a redhead.
Sent from my iPhone using Tapatalk
-
Looks great Charles! I'm sure your kids are going to love it.
If you don't mind sharing...
How much are you paying for sod in your area? I'm thinking of ordering up to another 10,000 sq/ft. 10k delivered is running $2,500 for me right now, if I return the pallets.
-
Tommy I’m paying 135 for common Bermuda per pallet 425 sq ft
Your deal sounds pretty solid.
I get to keep the pallets....they make for a good redneck bonfire.
So here’s the latest taken from standing at the firepit. They finished today and replaced the hardy they broke. I didn’t have them paint it because I’m about to repaint the entire house and casita....as soon as the wife decides on paint.
(https://uploads.tapatalk-cdn.com/20180406/3e87f3a6bb458e8965e40eb1d3654f12.jpg)
Sent from my iPhone using Tapatalk
-
Looking like an Expedia ad: “Redneck Holiday Texas Style”
-
I am waiting for the Air B&B ad to come out. Everything is looking great. Resort style.
I know nothing about salt pools. Is there a way to remove the salt and make the water drinkable in a survival situation? Short of distilling it i guess.
-
Sometimes you can taste the salt but you can drink it as is. The salt is just turned into chlorine by the system and is supposed to regenerate, but I add salt every year and still shock.
-
Kids are begging for the inaugural swim and we just got a cold snap. 39 tonight. So I fired up the 400,000BTU heater at 10:45. Pool water was 57 hours later it’s 67.
Sent from my iPhone using Tapatalk
-
Nothing like steam coming off the pool when its cold out. I got a heater for mine, but not ran the gas pipe yet.
-
Well this is a special inaugural swim occasion. I ain’t running a heater for the whole pool often if ever again
7:24 am ambient temp 40. Pool temp 78
Roughly 2.3 degrees an hour increase.
Roughly 4 gallons an hour to run the heater.
At current cost of propane here that’s just under $10 an hour for the heater to run.
I gues $100 to heat the pool once ain’t the end of the world but it’s pretty silly IMO
Of course it’s been cheaper if it was 60 outside and no 40 :eek
Sent from my iPhone using Tapatalk
-
You knew this was a slippery slope when you agreed to get a pool...... :popcorn:
-
As I like to say ( and did to the guy that shot himself in the leg re-holstering his pistol) hard to feel sorry for someone with a self inflicted gunshot wound.
Sent from my iPhone using Tapatalk
-
It's only money Tex. I told my wife, a pool is like a broken slot machine, keep throwing money in it and get nothing in return.
So now I'm raising the backyard a few inches in anticipation of the upcoming pool (to keep the wash from filling it with sand)
:facepalm
Sent from my Pixel using Tapatalk
-
Anybody else notice the complex digital grass cammo pattern Tex did there?
Should disguise him from orbit!
-
(https://uploads.tapatalk-cdn.com/20180408/b7c604d47baf28cbf96938a204ab81f9.jpg)
I’d say it’s been a hit today.
Sent from my iPhone using Tapatalk
-
Mama better not find out that your puttin bathing suit pics of here online......as a matter of fact, send me your addresse, because i have a feeling i will have to show up in black in a few days once they have released your body from the morgue
-
I’m prepared for the consequences.
And don’t think the good booze will be left. I’ll have finished it
Sent from my iPhone using Tapatalk
-
Notice they’re in the hot tub... pool still too cold?
Sent from my iPhone using Tapatalk
-
I’m prepared for the consequences.
And don’t think the good booze will be left. I’ll have finished it
Sent from my iPhone using Tapatalk
:grin:
-
Mama better not find out that your puttin bathing suit pics of here online......as a matter of fact, send me your addresse, because i have a feeling i will have to show up in black in a few days once they have released your body from the morgue
He lives in HOG country Nate - no body, just teeth and memories!
-
Pool was 88 and spa was 92 since that was where most of the heated water flows
They spent time in both. The pool was just the right depth. 3’9” on the ends and 5’ in the middle.
Sent from my iPhone using Tapatalk
-
I'm thinking you need to splice in a wood fired boiler/pool heater
-
Or use the BBQ to heat it up, double duty!
I figured the same on mine to heat. But mainly got it for getting open earlier and a little later use. Using a cover really helps!!! I dodn't use it last year and you could tell.
-
:likebutton:
-
More grass. Sad my trailer can’t handle 3 pallets. Will be looking for a gooseneck
(https://uploads.tapatalk-cdn.com/20180413/bf6e5d446f8d2eb870b1fd811d754a81.jpg)
Sent from my iPhone using Tapatalk
-
Got a little better than two pallets down. Rest of the third will go over by the casita.
(https://uploads.tapatalk-cdn.com/20180414/da5b06de326f5eae060c0a97ea901aa1.jpg)
Sent from my iPhone using Tapatalk
-
Looking good - gotta be a great feeling getting close to finishing the large scale operations!
-
I appreciate the happy thoughts but I still have to paint both the casita and main house then finish electrical and plumbing and insulation and the interior of the shipping container and on and on.....
Sent from my iPad using Tapatalk
-
House projects never end... and you have two houses! :cookoo
Sent from my iPhone using Tapatalk
-
So today, I took some PTO after I had a breakfast meeting with a business associate.
Hauled $600 worth of paint and my airless sprayer up to the hide. caulked some joints and nailed a few loose pieces of hardi and then got after it. Started about 2:30 and finished about 7. All the eaves, main parts of the house are painted now. I just need to get paint selected for the trim and do that part by hand. I love my titan 400i that I bought from sherwin williams in 2003. I've painted 2 houses and some cabinetry with it and it has more than paid for itself and I still have a great tool.
Tomorrow I'll reinstall some of the downspouts, lights and stuff that I removed to make painting easier. Then I may pressure wash the casita and get it ready to paint.
-
(https://uploads.tapatalk-cdn.com/20180418/c4f0357353fc7c8042966dfbc5be40f1.jpg)
New color below. Old color up top. Didn’t like the orangeish red tone. This is much more brown.
Sent from my iPhone using Tapatalk
-
(https://uploads.tapatalk-cdn.com/20180418/c4f0357353fc7c8042966dfbc5be40f1.jpg)
New color below. Old color up top. Didn’t like the orangeish red tone. This is much more brown.
Sent from my iPhone using Tapatalk
I like the brown better also. :likebutton:
-
I like them both
THe top color is what I expect from a cabin I'd find in Colorado on some lofty setting, but the more subtle brown looks like it is more a part of the earth, whereas the more orangey color seems to make a break from the ground.
I'd be happy with either.
Good work!
-
Thanks. Tried out a trim color today.
Then reinstalled downspouts and lights and cleaned up equipment.
Then cleaned overspray from windows and automated the pool.
The guy never explained about pool automation and I’m glad he didn’t. I did for $750 what he was going to charge $2500 for. Now I have a floating waterproof remote that I can control the settings.
(https://uploads.tapatalk-cdn.com/20180418/5e1e36567117c36222f5928f77991237.jpg)
(https://uploads.tapatalk-cdn.com/20180418/a5676f17076e67b234f8fcb0e4823f36.jpg)
(https://uploads.tapatalk-cdn.com/20180418/f07b1415bce495d4358cd77d3920330f.jpg)
Sent from my iPhone using Tapatalk
-
That brown looks a lot better at that angle, especially with the upper painted.
-
You going to put some kind of cover over the PVC pipes to protect them from the sun?
Sent from my iPhone using Tapatalk
-
Nice work there with all digital. Even auto controlled valves! Looks like we have the same heater with the nickel core, better for salt systems. Just paint the pipes.
They did a standard timer on mine. I do need to upgrade it for real time info and running the solar.
Honestly, get a cover for it to keep the heat in and gunk out. Just cut to fit leaving a hole for the heated water.
-
Thanks guys. That area stays in the shade. I plan to build a little privacy fence around it but that’s about it.
I also have the home internet interface that will allow me to monitor and operate it remotely from anywhere in the world.
Not sure I want or need that but I may send it back.
Sent from my iPhone using Tapatalk
-
Just thinking the UV rays would make the pipes degrade over time and then one little bump... crack!
Sent from my iPhone using Tapatalk
-
Makes sense Ryan. I’ll do it when I build the fence around it.
Sent from my iPhone using Tapatalk
-
Looking great! Personally think the paint color is a big improvement.
I might have missed it somewhere, but are you planning a sprinkler system? I'm enjoying the new lawn, but it might get old moving sprinklers around. For now that is the plan but after the savings recovers a bit I might start researching a more permanent irrigation system.
-
I swore I wouldn’t be a slave to the grass but I fight the urge to manicure it. I want it to get established but I’ll probably wait until I get a well drilled before I think about sprinklers for the grass. I have a 6 zone controller and 2 zones running already for the garden and the landscape beds. It would be easy to add on. Just some pvc and sprinkler heads and I have a lot already laying around.
Sent from my iPhone using Tapatalk
-
When you get ready to do sprinklers, look at the Hunter PGP-ADJ heads. Yes Orbit carries a knock off at Home Depot or Lowes, but not the same quality. Place really looks nice Charles.
-
I got those heads in the back, wish I had em in the front. Easy to adjust and can cover a good area.
-
When you get ready to do sprinklers, look at the Hunter PGP-ADJ heads. Yes Orbit carries a knock off at Home Depot or Lowes, but not the same quality. Place really looks nice Charles.
Yes. Hunter or rainbird - they’re pretty much interchangeable - at least the pop up ones.
Sent from my iPhone using Tapatalk
-
When you get ready to do sprinklers, look at the Hunter PGP-ADJ heads. Yes Orbit carries a knock off at Home Depot or Lowes, but not the same quality. Place really looks nice Charles.
Yes. Hunter or rainbird - they’re pretty much interchangeable - at least the pop up ones.
Sent from my iPhone using Tapatalk
I have my entire lawn around the house, make it about 1.0-1.5 acres on a 9 zone water sprinkler system.
You will have problems
Every year, possibility of freeze damage.
My pump has broken several times
The electronics buried in the lawn at various points fails regularly
I mow over and crush heads like all the time
Over a winter, some heads will no longer work or (and this is weird) come up crooked!
I winterize it with air pressure, making sure to blow vegetable oil and WD-40 throughout the system in the fall. Last two years I stopped using it. I guess I really don't care about the nice suburban lawn any more. I'll let the 40 somethings compete all they want. My goal is to park a junk car on my front or side lawn just to mess with them this summer '-))
-
Right now I'm just using a couple hoses and tripods. It's working fine and really makes the investment in a system seem silly. We'll see if my resolve holds when the heat starts.
-
Right now I'm just using a couple hoses and tripods. It's working fine and really makes the investment in a system seem silly. We'll see if my resolve holds when the heat starts.
At some point you will get tired of moving hoses, forgetting to turn off the water, or change sprinkler locations.
-
"I have my entire lawn around the house, make it about 1.0-1.5 acres on a 9 zone water sprinkler system.
You will have problems
Every year, possibility of freeze damage.
My pump has broken several times
The electronics buried in the lawn at various points fails regularly
I mow over and crush heads like all the time
Over a winter, some heads will no longer work or (and this is weird) come up crooked!
I winterize it with air pressure, making sure to blow vegetable oil and WD-40 throughout the system in the fall. Last two years I stopped using it. I guess I really don't care about the nice suburban lawn any more. I'll let the 40 somethings compete all they want. My goal is to park a junk car on my front or side lawn just to mess with them this summer '-))"
1. Freeze damage possible but if blown out properly should not happen and not sure you need to have oil blown into the lines
2.Set the system up with water manifolds for the valves in a shrub bed and run wire loom for the valves laid under the main water line for protection.
3.Driving over heads and hitting them with the mower, or shoving them down on one side so they come up crooked, and broken water pump ....Just some more Don things...
-
Well. Got the casita prepped and started shooting paint at 8 am saturday. Was done with main areas by 10:30. Then went to town to get paint for the dormer. Along with several paint color samples to test on the trim.
Got on the roof again and taped and papered off the area and shot the dormer.
Getting closer. Picked the trim color. I took the two the wife kinda liked and dumped them in a container and mixed them 50/50. Boom. Done. Now I have to get a couple of gallons and finish the trim and I’m done with the outside of both houses and can move to plumbing and finish electrical.
Also installed the 2 LED can lights on the porch and installed gooseneck lights over the door and the gable window.
(https://uploads.tapatalk-cdn.com/20180429/a362a4b2fb9257949eaa83b9b3cae881.jpg)
Sent from my iPhone using Tapatalk
-
Looks good TR
Sent from my iPhone using Tapatalk
-
Thanks Dave. As soon as I get the facia painted over the porch I can install the gutter on the sawhorses in the foreground and get all that picked up.
Sent from my iPhone using Tapatalk
-
Glad to see that "Club Red" is moving right along!
-
:likebutton:
-
:likebutton:
-
I’m growing less patient and am going to start sub contracting.
Got a plumber coming Sunday to give me an estimate on the plumbing rough in.
Then I’ll finish the electrical and contract insulation and Sheetrock.
Sent from my iPhone using Tapatalk
-
so what your really saying is..................HH6 has put her foot down and said no more shenanigans
-
Kind of ironic there Nate... shenanigans starts with ‘she’...
Sent from my iPhone using Tapatalk
-
Doing it all yourself gets to you, I know!
-
Kind of ironic there Nate... shenanigans starts with she...
Sent from my iPhone using Tapatalk
right
-
Doing it all yourself gets to you, I know!
It’s not so much the doing, which I really enjoy. It’s wanting it to be done so the girls can invite their friends and I have place to put he little hormonal womens so that I am not driven insane
Sent from my iPhone using Tapatalk
-
Doing it all yourself gets to you, I know!
It’s not so much the doing, which I really enjoy. It’s wanting it to be done so the girls can invite their friends and I have place to put he little hormonal womens so that I am not driven insane
Sent from my iPhone using Tapatalk
Nice try!
Everyman's challenge who has multiple females
Won't work
Prayers sent!
-
The only things that work well are, for the most part, against the law, and the Bible. Suicide, homic...........
Sent from my Pixel using Tapatalk
-
Keep the big house stocked with Chocolate and hunker down in the little house, secured behind steel doors and hurricane shades, with Bourbon, meat, firearms, ammo, and your favorite movies! Only come outside in the wee hours of the morning to watch the sunrise by your fire as you sip coffee and fry an egg......you have until 9am before you must retreat back inside your compound before the zombies might rally for a swim.....prayers sent your way.
-
Doing it all yourself gets to you, I know!
It’s not so much the doing, which I really enjoy. It’s wanting it to be done so the girls can invite their friends and I have place to put he little hormonal womens so that I am not driven insane
Sent from my iPhone using Tapatalk
Nice try!
Everyman's challenge who has multiple females
Won't work
Prayers sent!
I'm in that same boat... but at least I have a few more years until it reaches critical mass (they're 8 and 4).
-
Yeah, I feel for you. I have five at home, a couple old enough to cause trouble(16,15,10,5,1). And gotta watch out for momma on occasion too. That’s where having a little acreage comes in handy. And like was said above, just keep the house stocked for their needs and the garage or little house stocked with yours and you might survive.
-
So I left my 4 for 4.5 days, I’m surprised someone hasn’t been murdered....
-
Doing it all yourself gets to you, I know!
It’s not so much the doing, which I really enjoy. It’s wanting it to be done so the girls can invite their friends and I have place to put he little hormonal womens so that I am not driven insane
Sent from my iPhone using Tapatalk
Nice try!
Everyman's challenge who has multiple females
Won't work
Prayers sent!
I'm in that same boat... but at least I have a few more years until it reaches critical mass (they're 8 and 4).
So I had three little ladies at about 18 months separation between each of them, and the momma. When I flew commercial airliners, I could bid a four or a five day trip at around the third week if I have that memory right. That was the ONLY way I (well, maybe they...) survived that retched time.
Then, and I thank God, someone started a couple wars and I was outta here. Got to play Armee while the madness went on without me! So you see, my memories of warfare all all good ones! ;-)
-
Interesting Don. However I don’t think they let me enlist at my age now.....(although getting shot at seems like a good trade off )
Sent from my iPhone using Tapatalk
-
Starting to make some progress
(https://uploads.tapatalk-cdn.com/20180505/c98597a78a1cbef8ae5f0be3fb35aff8.jpg)
(https://uploads.tapatalk-cdn.com/20180505/2869324ed8e3f49d873f5f490fb9d042.jpg)
Got to paint the trim on the back and the straight side.
Then I can move to the house.
Sent from my iPhone using Tapatalk
-
Casita is officially finished on the outside save for the threshold extension and the last deck board.
Got almost all the house trim painted. Still have the area above the hip roof where I’ll have to make a platform to set a ladder on to get to the peak.
Then the window and door on the rear porch. 86 today. Getting warmer.
(https://uploads.tapatalk-cdn.com/20180506/4059dd8d30425989165c89cdd4314ab8.jpg)
(https://uploads.tapatalk-cdn.com/20180506/929556de36402428882ea6189e9cff4d.jpg)
Sent from my iPhone using Tapatalk
-
That grass sure looks green! What type of Hand rail are you going to do ?
Sent from my iPhone using Tapatalk
-
Looks like something from a movie, very nice!
-
I agree, very nice Tex!
-
Sure do like the covered porch patio areas. But I am from the rain country...
-
Thanks guys, Dave probably use a 2x6 treated top rail and some 2x2 rails and a 2x4 lower stringer. Not sure if I'm going to put railing around the porch yet or not. Wife thinks I should, I think if you are dumb enough to fall off a porch then you should sprain an ankle...
Still have a bit of sod to buy and lay down.
I ordered a sewage lift pump station(casita sits below the septic tank level) to move sewage up to the main system. Also ordered a Norritz 3.5gpm tankless water heater, a KBRS composite shower pan, shower drain and shower valve. Then I picked up a 30 inch door and pocket door system as I need to frame the bathroom walls out so I can mount the shower valve before the plumber comes in.
This weekend I have to finish painting the remaining trim on the main house and then will probably tackle the framing for the bathroom and the pocket door to get the shower drain and shower valve installed so I can get the plumber out soon.
Then I can move on to the man door in the shipping container and framing the inside of the container to be ready for the spray foam guy for the casita and the shipping container.
-
Picked up the sewage lift station, check valve and high water alarm for the casita plumbing along with a shower rough in valve.
Then swung by the metal supply and picked up a 36 inch man door, frame and a stick of 2x4 steel tube to install a man door in the shipping container
Got the painting finished on the trim for the main house and went to framing the bathroom walls and pantry walls.
Ready for the plumber to rough in and install the sewage lift station. Won’t be there next weekend but will probably schedule him out the week after.
Then gotta just finish up the electrical before shifting my attention to the shipping container and install the studs and man door and get ready for spray insulation for the casita and the shipping container at the same time.
(https://uploads.tapatalk-cdn.com/20180513/bf486cfa7857c533e4e611054fd53a04.jpg)
(https://uploads.tapatalk-cdn.com/20180513/22c56cf071cf96bd1e0f6f01a0c9ea3e.jpg)
Sent from my iPhone using Tapatalk
-
Definitely osha approved.
Sent from my iPhone using Tapatalk
-
Definitely osha approved.
Sent from my iPhone using Tapatalk
Shudder at the thought of that.
-
That is why I’m going have to hire a painter - I can afford hydraulic scaffolding like that! :likebutton:
-
Something wrong with ladders in tractor buckets???
-
Something wrong with ladders in tractor buckets???
I don't think there is anything wrong with them, probably just doesn't want to run over them so in the bucket is a safe space...... :popcorn:
-
Something wrong with ladders in tractor buckets???
I don't think there is anything wrong with them, probably just doesn't want to run over them so in the bucket is a safe space...... :popcorn:
Lol. Thank you. Just thank you.
Sent from my iPhone using Tapatalk
-
Hey, I saw that on youtube a couple times. Well what happened right after!
-
Hey I think it’s a clever solution to a common problem! I like it!!
Sent from my iPhone using Tapatalk
-
Well it was cheaper than renting a lift or building a platform
:eek
Sent from my iPhone using Tapatalk
-
Well it was cheaper than renting a lift or building a platform
:eek
Sent from my iPhone using Tapatalk
I seem to remember you bought climbing gear, I also saw trees. But I also see a roof that could have a fall arrest system mounted to provide a safe and effective system to facilitate a safe working environment for someone to paint and for further upcoming maintenance.
-
yeah Bobby, I'm old enough to know better but still to young to care. I figure at 17 ft I can survive the fall as I bounce off the metal roof and then the final 9 feet to the ground. It would take longer to rig up the harnesses and anchor points than to slap a ladder in the bucket and start painting.....
-
Well as long as you don't let Don run the tractor, you shouldn't have to worry about the hydraulic lines blowing, causing a gravity test with the cowboy riding the ladder. : popcorn
Sent from my Pixel using Tapatalk
-
Well it was cheaper than renting a lift or building a platform
:eek
Sent from my iPhone using Tapatalk
I seem to remember you bought climbing gear, I also saw trees. But I also see a roof that could have a fall arrest system mounted to provide a safe and effective system to facilitate a safe working environment for someone to paint and for further upcoming maintenance.
Bobby,
You sound like some safety Nazi
You're an Airborne grunt, act like one! ;-)
Ladder in the bucket is fine!
-
I think the rule of thumb is as long as you don't leave anything under it to impale yourself on when you fall it's considered safe.......
-
Bobby,
You sound like some safety Nazi
You're an Airborne grunt, act like one! ;-)
Ladder in the bucket is fine!
Probably cause I'm a Safety Trainer and Fall Protection is part of my purview. However, I can say that during the last blizzard I was shoveling dense wet heavy snow off the roof in windy slippery conditions.. So maybe I don't have much leeway either..
For the record, I can still PLF and walk away... TRN maybe not so much.
-
So I probably shouldn’t mention the day I was standing on that little hip roof power washing the siding. The grip on metal roof is tenuous at best and when it gets wet it turns to owl snot. One moment I’m standing upright and the next I’m face down flat on my stomach slide towards the edge at a high rate of speed. Still amazed at the human mind and the speed of thought. In that millisecond I thought “point your toes, maybe you’ll catch the lip of the gutter and that will keep you from going over”
Fortunately it worked. Thus led to the improvised scaffolding which provides much greater purchase than friction on metal roof....
Sent from my iPhone using Tapatalk
-
As I’ve never been trained what does PLF consist of ? Assuming it is a duck & roll keeping arms in similar to a skate board or roller blade tumble?
& yes, I realize I’m opening myself to vast criticism by mentioning skate boards & roller blades :facepalm:
-
As Ive never been trained what does PLF consist of ? Assuming it is a duck & roll keeping arms in similar to a skate board or roller blade tumble?
& yes, I realize Im opening myself to vast criticism by mentioning skate boards & roller blades :facepalm:
here yah go shawn: https://www.youtube.com/watch?v=FPfm5J9ixdI
-
Bobby,
You sound like some safety Nazi
You're an Airborne grunt, act like one! ;-)
Ladder in the bucket is fine!
Probably cause I'm a Safety Trainer and Fall Protection is part of my purview. However, I can say that during the last blizzard I was shoveling dense wet heavy snow off the roof in windy slippery conditions.. So maybe I don't have much leeway either..
For the record, I can still PLF and walk away... TRN maybe not so much.
Good point!
Maybe you can teach him the PLF via YouTube or something.
-
So I probably shouldn’t mention the day I was standing on that little hip roof power washing the siding. The grip on metal roof is tenuous at best and when it gets wet it turns to owl snot. One moment I’m standing upright and the next I’m face down flat on my stomach slide towards the edge at a high rate of speed. Still amazed at the human mind and the speed of thought. In that millisecond I thought “point your toes, maybe you’ll catch the lip of the gutter and that will keep you from going over”
Fortunately it worked. Thus led to the improvised scaffolding which provides much greater purchase than friction on metal roof....
Sent from my iPhone using Tapatalk
I hate working on metal roofs
I found out that a leather sofa cushion laid down and my kneeling on it provided the grip I needed until the droplets of sweat migrated underneath...Then comes a couple of two inch slips, and that precedes the final break and slide...
-
As I’ve never been trained what does PLF consist of ? Assuming it is a duck & roll keeping arms in similar to a skate board or roller blade tumble?
& yes, I realize I’m opening myself to vast criticism by mentioning skate boards & roller blades :facepalm:
here yah go shawn: https://www.youtube.com/watch?v=FPfm5J9ixdI
:likebutton:
-
Just because I’m too smart to jump out of a perfectly good aircraft doesn’t mean I don’t know how to fall. Feet together, arms in and collapse under tension as you meet the earth feet first (hopefully). Did it just a few months ago when my ladder rolled off the tree at about 12-13 feet in the air. Decided that I was going to the ground on my own terms and bailed off feet first.
Helped having Airborne relatives. And falling off stuff since I was about 8 years old.
Sent from my iPhone using Tapatalk
-
So plumber came out yesterday and started on the rough in. Laid the 2 inch line from the septic to the lift station and put the lift station in the ground. Then proceeded to rough in the waste lines in the casita and will come back Monday to finish.
So I started tackling this today. I’m fighting a bad cold and 92 heat and humidity didn’t seem to help.
First up. Mark the opening and proceed to cut it out with a small grinder with a cutoff wheel. Makes me wish I had bit the bullet and got a plasma cutter. But it got done.
(https://uploads.tapatalk-cdn.com/20180527/4f6c5c7efad750af98025c0fb48ac02b.jpg)
(https://uploads.tapatalk-cdn.com/20180527/96d43e9748d568f2e73ee6a6e7e4f899.jpg)
Then clean up the leftover welds on the base beam and clean the paint off the edges where I’ll be welding.
Door is metal with a metal knock down frame.
(https://uploads.tapatalk-cdn.com/20180527/a7943218ec91c62b508a0d45d3cbac12.jpg)
Then start mocking up the sub frame out of 2x4 square tube
(https://uploads.tapatalk-cdn.com/20180527/ef6245e6cd9574da751f9daa93d9c6f3.jpg)
Then install the frame and door.
Got the left side plumb and installed and then on to the right and then lastly the top.
(https://uploads.tapatalk-cdn.com/20180527/6a4fa796a1f1332ba3312d16efa636a1.jpg)
Sent from my iPhone using Tapatalk
-
And semi finished.
Have to install the weather stripping and cut the hole in the jamb for the latch and then clean up some welds and prime it.
(https://uploads.tapatalk-cdn.com/20180527/80e696f72582f2ef1e89cd0f0813b371.jpg)
Sent from my iPhone using Tapatalk
-
Then, when I'm finished I'll start installing the stud walls in the shipping container and get it ready for insulation at the same time the insulator is spraying the casita. Getting closer to being able to install AC and sheetrock...
-
AC, insulation & Sheetrock that’s gunna be one nice shipping not container...... :tongue:
-
Then, when I'm finished I'll start installing the stud walls in the shipping container and get it ready for insulation at the same time the insulator is spraying the casita. Getting closer to being able to install AC and sheetrock...
Lol. The Sheetrock is for the casita. The shipping container will be finished with 7/16 OSB over studs and insulation.
Sent from my iPhone using Tapatalk
-
Then, when I'm finished I'll start installing the stud walls in the shipping container and get it ready for insulation at the same time the insulator is spraying the casita. Getting closer to being able to install AC and sheetrock...
Lol. The Sheetrock is for the casita. The shipping container will be finished with 7/16 OSB over studs and insulation.
Sent from my iPhone using Tapatalk
I know, was picking on you. The one armed bandit is away on disability leave so I think he’s currently protected by FMLA from me for the time being..... & we’ll after that serial prefix on his new tool I figure it’s karma at the very least.
-
Nice work!
-
Ok. You all know about putting the zero turn in the pond so I’ll not repeat the drama here.
On to the shipping container. Got most of the studs and ceiling joists in. Got to cut a few more of the tie down hooks off to get the last studs in.
(https://uploads.tapatalk-cdn.com/20180616/aa2e1ecc64d51fcb0cf7ca7ac3b31900.jpg)
Sent from my iPhone using Tapatalk
-
What are your inside dimensions of this?
Have you seen the houses people build out of these? Pour a heated concrete pad stack two on one side two on the other and two for a back wall. Metal roof over the top and a very large open floor plan for a patio type living area and a giant set of garage doors on the open end.
This is about the coolest one I have seen and I really like the idea of its layout and open space
(https://uploads.tapatalk-cdn.com/20180616/12896dc8f9c642cd6398e1b65aff54e2.jpg)
Sent from my iPhone using Tapatalk
-
Finished interior dimensions will be 7’4”wide 8’4”tall and 38’ long
Yes there are many web sites dedicated to building with shipping containers. I like the modern look where they cantilever the second story containers.
No need for a heated slab in the south :wink
Eventually I may cut enough trees to put another parallel to it 30 ft apart and weld C purlin between them and install R panel roofing to give me a 30x40 covered storage/parking area.
Sent from my iPhone using Tapatalk
-
They are building a 3 story unit near my sons school.
-
The cost is really a lot less than new build homes.
Sent from my iPhone using Tapatalk
-
Looks like progress.
We know the story about your swimming hole, but,
I think your wife needs an account on here so we can get some zero turn pics. If not from this time , maybe the next.
Sent from my Pixel using Tapatalk
-
Ken third times a charm. I’ll go down with the ship. Dealer called and it’s ready to pick up. He said he was amazed there was no damage
Here’s the container ready for spray foam
(https://uploads.tapatalk-cdn.com/20180616/28c0133f710a97842f0ac627e6c55ab5.jpg)
Sent from my iPhone using Tapatalk
-
(https://uploads.tapatalk-cdn.com/20180616/8d7049d12f48c3ac6335000803e83f1c.jpg)
Little time to relax while the pork butt finishes
And don’t be jealous. Not everyone can have sticks that look as good as these!!
Sent from my iPhone using Tapatalk
-
You shouldn’t call your wife names like that. I second Ken’s idea. We need a mrs redneck on here
Sent from my iPhone using Tapatalk
-
You shouldn’t call your wife names like that. I second Ken’s idea. We need a mrs redneck on here
Sent from my iPhone using Tapatalk
Preferably one who is quick with a camcorder, we need more videos....
-
You laugh. Mowing by the pond is like don piloting his chinook thu enemy territory. It’s rough terrain and danger is everywhere. Only the fearless tread where I send that mower
Sent from my iPhone using Tapatalk
-
What enemy? Deer? Squirrels? Long weeds?
Sent from my iPhone using Tapatalk
-
Raccoon
Sent from my iPhone using Tapatalk
-
You laugh. Mowing by the pond is like don piloting his chinook thu enemy territory. It’s rough terrain and danger is everywhere. Only the fearless tread where I send that mower
Sent from my iPhone using Tapatalk
The bottom of the fish pond? Carp maybe?
-
Take the guards off that mower and make raccoon burgers
Sent from my iPhone using Tapatalk
-
You laugh. Mowing by the pond is like don piloting his chinook thu enemy territory. It’s rough terrain and danger is everywhere. Only the fearless tread where I send that mower
Sent from my iPhone using Tapatalk
The bottom of the fish pond? Carp maybe?
New obstacles in BUDS school
Sent from my iPhone using Tapatalk
-
Here I was thinking fish breeding habitat
-
Did you place the 2x4's short side or side side against the steel?
Did you wedge them in and glue them like we were talking about, or what way did you go?
-
Short side against steel to give more depth of insulation.
Wedged in and then tied together at the top with the joists.
No glue. But I shot a screw in the bottom of each one into the wood floor.
Seems legit and solid.
Sent from my iPhone using Tapatalk
-
Once you get all the plywood up, it will be nice and solid
-
Time to finish mowing around the pond
(https://uploads.tapatalk-cdn.com/20180617/c31a20bc41810fd45009428a3abc896e.jpg)
Sent from my iPhone using Tapatalk
-
I don’t see M/Ts on the drive tires of the mower yet...
Sent from my iPhone using Tapatalk
-
Looks like they washed it for you also?
Sent from my iPhone using Tapatalk
-
Does anyone else see this as a viable solution to the problem
(https://uploads.tapatalk-cdn.com/20180617/b38d65122ae236df2462d9975372e924.jpg)
Plus (https://uploads.tapatalk-cdn.com/20180617/4df0810ee7f4a730f9029452cab6a2c6.jpg)
Sent from my iPhone using Tapatalk
-
I don’t see Paddle tires on the mower yet...
Sent from my iPhone using Tapatalk
FIFY
-
Bahaha. You guys are ruthless!
Sent from my Pixel using Tapatalk
-
How about something like this? My wife wants one because we have some nice hills on the property, and she wants to be safe. Oh well, more toys for me. (https://uploads.tapatalk-cdn.com/20180617/a002419cbeb6a6d913aafd56cbb9e2c3.jpg)
Sent from my iPhone using Tapatalk
-
Dave, is that 4 wheel drive? Buddy if mine in SE KY had to have one that was to mow his mountain side yard.....
-
Dave, is that 4 wheel drive? Buddy if mine in SE KY had to have one that was to mow his mountain side yard.....
I have seen some similar to that eight wheel monster up at Weberstate as it’s mostly steep hill, they seem to do pretty awesome
Sent from my iPhone using Tapatalk
-
Time to finish FISH mowing around the pond!
(https://uploads.tapatalk-cdn.com/20180617/c31a20bc41810fd45009428a3abc896e.jpg)
Sent from my iPhone using Tapatalk
Fixed it for ya there BUDSy!
-
Dave, is that 4 wheel drive? Buddy if mine in SE KY had to have one that was to mow his mountain side yard.....
Yes, it’s hydrostatic drive 4x4 hydraulic articulates in the middle for steering. They are rated to 20 degrees slope sideways or up down without the dual tires. With the duals, they are rated to 30 degrees.
Sent from my iPhone using Tapatalk
-
But are they amphibious?
Sent from my Pixel using Tapatalk
-
But are they amphibious?
Sent from my Pixel using Tapatalk
Not that it would help Charles but I think H would float, just a consideration in case you get stuck in a flood Ken.
-
There were two canoes in the picture too. Maybe a weed eater and a canoe would be better around the pond? :)
Sent from my iPhone using Tapatalk
-
You laugh. Mowing by the pond is like don piloting his chinook thu enemy territory. It’s rough terrain and danger is everywhere. Only the fearless tread where I send that mower
Sent from my iPhone using Tapatalk
I feel ya on that!
Not the part about the hook
But piloting the mower over hazands...Def been there and did that!
-
I used to mow a lot of side hills around the farm with a zero turn. A lot of those areas were impossible to mow before we had a set of better tires installed. They will tear your lawn up more then the standard turf tire, but they help a ton on side hills.
-
Just put floats on it,,,,,,,,,,,,,,
-
Today finished the rough in of the electrical. 97 degrees and high humidity. Inside the house with no AC was closer to 102-104.
Ran smurf tube to the upstairs where the AV and computer equipment will be.
Only got lit up three times working in the hot electrical panel because I didn’t want to kill the music by cutting the main breaker.
(https://uploads.tapatalk-cdn.com/20180624/0e93b1d988d5b5bfe76c7a30c6b9eeb2.jpg)
(https://uploads.tapatalk-cdn.com/20180624/e3a74e881f0de340a0c2fbb29c754a00.jpg)
Still have a few circuits outside the house to run. The sewage sump pump and the mini split and the outdoor kitchen circuits. The ill properly label them.
Maybe a little overkill. 10 circuits in a 625 sq ft guest house. And that’s before the AC or stove should I put one in
Sent from my iPhone using Tapatalk
-
Looks clean. I don't like turning my stuff off either, whats a little tingle now and then.
Actually did socket upgrade today for my sons room for LED, got away zap free!
-
So official update.
Foam insulation guy came Friday for an estimate. Now I’m on the schedule in about 2 weeks. This house and shipping container will be tight. Fortunately I’ll be running mini splits that can dehumidify
Open cell inside and a 2 inch layer of closed cell underneath
Then I’ll work on the AC and pause the guest house project and finish the inside of the shipping container. Gotta get all my reloading equipment from my BIL and off load some long term storage stuff from the main house.
Got gravel delivered and spread in anticipation of heavy rain... and then it passed us by.
(https://uploads.tapatalk-cdn.com/20180704/c21dd91fdaa052bb47f12ef10d68f783.jpg)
(https://uploads.tapatalk-cdn.com/20180704/b860ef63810bb5a693eb26ab23aa2066.jpg)
Last night met up with a buddy from Kansas who had picked up a LB7 motor I plan to rebuild.
Nothing says red neck like a lifted old red truck with a motor in the back and a ton of fireworks in the back seat
(https://uploads.tapatalk-cdn.com/20180704/a4c28f14d923cdee8941b5f3780de8f0.jpg)
Sent from my iPhone using Tapatalk
-
So after a day of hot hard work in the shop I get a call at 7:30 from the insulator that he’s freed up and coming at 8 am tomorrow. Great, had to go do some clean up and a bit of work to get ready. Will get up at first light and finish.
Sent from my iPad using Tapatalk
-
Got the casita swept out and ready and built my end wall in the container.
(https://uploads.tapatalk-cdn.com/20180706/296fff014244109ed068ccfb08caec7d.jpg)
Ordered a mini split for the shipping container. Fredrich 9000 btu. About double what it needs but hard to find a 6000. The variable speed should make it workable
Then it’s on to running electrical to the container. Led lights , outlets , cat 6,
I’ll weld up the end doors so the only way in is through the man door.
Sent from my iPhone using Tapatalk
-
Charles, you need your own page. "Texas Resort Retreat" would be a lot better page name than having it posted inside the hide site page.
-
Charles, you need your own page. "Texas Resort Retreat" would be a lot better page name than having it posted inside the hide site page.
Bob it’s like most things in life. When women get involved, things get a lot more complicated. And expensive.
Sent from my iPhone using Tapatalk
-
Insulation guys almost done. Casita is finished. Shipping container almost done.
I have a window unit I’ll probably run in the guest house until I get the mini splits installed.
Sent from my iPhone using Tapatalk
-
(https://uploads.tapatalk-cdn.com/20180706/37df6923cae6797038d10ee29919c591.jpg)
(https://uploads.tapatalk-cdn.com/20180706/45be00b2cee8bef56e4af70f4a2d084b.jpg)
(https://uploads.tapatalk-cdn.com/20180706/b0393004e0bfabc46073390e39418cae.jpg)
Sent from my iPhone using Tapatalk
-
(https://uploads.tapatalk-cdn.com/20180706/051bac5191d9dd961fef9b7cf112281a.jpg)
Shipping container almost done
Sent from my iPhone using Tapatalk
-
Wow, looks really well done from here.
-
Very nice, per the usual we expect nothing less from you.
-
Really nice job all around.
Sent from my iPad using Tapatalk
-
I can’t take credit. I just wrote the check. Tomorrow I’ll start a materials list for finishing the sea can. 7/16 osb interior, led lights, 6 duplex outlets, shelving, sub panel. Then pressure wash and spray the outside in emerald green. I’ll rent the trencher from HD to run power and Ethernet next weekend.
Sent from my iPad using Tapatalk
-
Here’s the finished sea can.
Going to start hanging 7/16 osb for interior
(https://uploads.tapatalk-cdn.com/20180707/5645eddc67d0974bf6703dd87f93cfd5.jpg)
Sent from my iPhone using Tapatalk
-
Here’s the finished sea can.
Going to start hanging 7/16 osb for interior
(https://uploads.tapatalk-cdn.com/20180707/5645eddc67d0974bf6703dd87f93cfd5.jpg)
Sent from my iPhone using Tapatalk
Charles, is that a 40 footer? Any idea what you’ll have in total cost for that & are you costing the roof day with like that silver roofing rubberized covered paint? Just thinking for long term leak proof & to reflect some heat.
-
Sean, I'll be in it for close to $7k when its completely finished out with mini split, insulation, osb interior, electrical, lighting etc.
I'll pressure wash it for paint here soon and inspect the roof. Its a CWO container, so its in great shape and I doubt the roof needs much. Its in the shade for the most part and the 6 inches of foam insulation on the interior roof should make it as cool as a Yeti cooler.
The long term plan may be to buy another one just like it and put it parallel to it about 25 ft apart and cover both and the open area with c purlin and R panel roofing to create a covered parking area for the equipment. That'll be a few years away more than likely
-
Ok menses. This is not a redneck test.
Some of you may recall that I need to move my seacan about 3 feet back lengthwise to accommodate future expansion of the shop. It tares at 9600 and probably 10500 with the lumber in it. It currently rests on a rr tie at each end.
There is a conveniently placed tree that I can attach to.
I was going to rent 2 six ton lever hoists but I got to thinking. I have a 25 ton log splitter.
I was thinking of attaching the base end of the beam to the tree with straps or chain and then using the ram to press the chain( pulling it) forward about 1 ft at a time then re connect the pulling chain and pressing again. You get the idea.
I’d have to make a metal cover for the wedge so the point doesn’t cut the chain.
Is my logic off base? Why wouldn’t that work?
Sent from my iPhone using Tapatalk
-
Could you use some large logs to roll it back on, if it’s on RR ties already, lift it up more to the log height slide under and push.
Sent from my iPhone using Tapatalk
-
Dave I think 25 tons of force would move it if it was glued in place.
Lifting it is as much of a challenge as pulling it. The plan is to lay 2 more rr ties and drag it onto them.
Just wondering if I’m overlooking some safety aspect of using the log splitter.
Sent from my iPhone using Tapatalk
-
I think it would work, even if you had to set up a double pull with wire rope. Protect the tree bark too unless it is history after the move.
Added: Call in a friend with a good sized winch on their truck. Rig it up and be done.
-
Depends on how strong the log splitter (trailer?) mount/strap setup is. If it won't hand at least 20k of compression or stretch, then it might be sketchy. Sounds like a high lift might be safer...and that's sayin' somethin'. Of course if we had a crayon drawing of the situation we would be of greater help....or you can just try it and post pics of the carnage after.
-
Sounds like it would work as long as you mount the chain/straps in the right place and not bend the splitter.
-
It will probably work, hope you don’t tweak your log splitter. But just in case the whole thing goes south and the splitter ends up in the pond or something similiar. Can we request the wife unit video this for us? :popcorn:
-
I’ll make sure and get video.
I’m going to split a piece of heavy wall pipe to fit over the wedge edge and make sure the vectors are linear with the main beam. Use a recovery strap on the tree and chain to the container.
Sent from my iPhone using Tapatalk
-
single cut length of pipe should work, it will spring open and should fit blade good...
-
Hum...What would Don do..Stay away from that and all should be good.
-
Hum...What would Don do..Stay away from that and all should be good.
:popcorn:
-
and why cant your tractor not push it back the foot or 2 that you need?
if you place the bucket on the bottom frame portion of the container you should be good? just go slow and don't ram anything?
if all else fails, give boone a call and see if he can come down with something?
-
and why cant your tractor not push it back the foot or 2 that you need?
if you place the bucket on the bottom frame portion of the container you should be good? just go slow and don't ram anything?
if all else fails, give boone a call and see if he can come down with something?
Getting to close to what Don would do....
-
Bob's feeling froggy today. lol :beercheers:
-
Well maybe...If it don't move ya got to hit it harder.
-
I thought Charles owned like 12 chevy trucks? Can’t you hook a couple to it and tug it?
Oh wait, I forgot. Sorry
-
Shawn, aside from the Chevy poke. There’s simply not enough weight to get traction. Plus the direction I’m going is further into the woods and not accessible by truck. It would have to be a push, on gravel no less.
I have a 30000 lb tow strap and will probably pick up another and a couple 6 ft 1/2 inch grade 80 chains
Those will hook to the corners of the seacan and then to the tow strap which will allow adjustments as the container begins to move.
That’s probably a couple weeks away but I promise to get video.
In the mean time got started on the ceiling with some osb I had on hand. Then went to Lowe’s and got 30 more sheets
(https://uploads.tapatalk-cdn.com/20180707/abea4ddb090bc9af4b83230d5676f8b2.jpg)
Sent from my iPhone using Tapatalk
-
Thirty sheets? What did you pay per sheet?
What truck did you put them in, or flatbed trailer
My truck squats a whole lot with that much in the bed. Enough I won’t do more than that
Sent from my iPhone using Tapatalk
-
I sure would like to see the action, don't think one truck will move it unless it is tied to a tree with a wrecker between the truck and the load. BUT I am from Washington so just need to see it on video to believe it.
-
I believe in the power of hydraulics. Video will be available.
Dave I put the 30 sheets in the trailer.
7/16 osb is 46lb a sheet. Little over 1300 lbs. should be an easy load for a 3/4 ton if it’s set to factory rake
The dually just laughs. That weight just makes it ride better. IIRC the payload on the dually is 4700lbs
Sent from my iPhone using Tapatalk
-
Hum...What would Don do..Stay away from that and all should be good.
Well, not so quick there Tonto!
I'd take a run at it with the rubber track loader and it would move as far as I wanted!
But that contraption Tex is talkin' about sounds like it would work, but we'd need a vid just in case it didn't! ;-))
-
Tex,
How about two RR ties longways and jack up the end with a bottle jack and put some 1” conduit under for rollers ( like the Egyptians). A couple come a longs should move it pretty easy.
You’re not lifting 10k just moving some of it.
-
Let’s put it up on peg legs. Three footers. Than you just push it over and it should fall the distance of the legs it’s standing on
Sent from my iPhone using Tapatalk
-
So let's add a couple thousand pounds to it before we try to move it, maybe it'll be easier. : Knucklehead
Sent from my Pixel using Tapatalk
-
Hum...What would Don do..Stay away from that and all should be good.
Well, not so quick there Tonto!
I'd take a run at it with the rubber track loader and it would move as far as I wanted!
But that contraption Tex is talkin' about sounds like it would work, but we'd need a vid just in case it didn't! ;-))
Now that is what I am talking about. Two rubber tracks laying in the woods and Don scratching his head wondering what went wrong.
-
So let's add a couple thousand pounds to it before we try to move it, maybe it'll be easier. : Knucklehead
Sent from my Pixel using Tapatalk
I was thinking the same thing!
Why not double or triple (maybe 4x?) over some line in pulleys to a big tree behind the sea can? Will increase your pulling power with less effort.
Sent from my iPhone using Tapatalk
-
Regardless, as long as it’s not digging in the dirt it should move pretty easy. I do agree a couple snatch blocks would help. Another thought is hire a local wrecker (as cheap as buy more gear) to come in with his truck winch. Between that and rigged off a couple trees I’m sure you could make it work too if he can anchor his truck to a tree on the front end or several chevys (ironic I know!).
Honestly, the log splitter may work but it would not be my first choice for the record. Too each their own and we’ve been promised video so on the other hand it should be interesting either way.
-
All good ideas. I’m trying to do this without spending a ton on rigging that I don’t have.
Yes, Ken, I added 2000 pounds to the interior finish just to make it a challenge. :wink
I may use the hi-lift to raise each corner and put some lubricant on the RR ties just to help.
All in all I’ll take it slow, check angles and bail on it if it looks like it’s not working. Worst case is pay a mover $650 to pick it up and set it down.
Sent from my iPad using Tapatalk
-
Here’s a question for you- how are you going to anchor the log splitter? It’s going to need more anchor force than the combined weight and lateral forces you’re putting into play or you will only move your splitter. That cylinder rate is between the ram and the fixed anchor points with the log rack.
-
The end of the beam(left side circle) will be strapped to the tree horizontally like it sits. The wedge (right circle) will actuate the pulling strap which will be attached to the corners of the seacan
(https://uploads.tapatalk-cdn.com/20180708/b281e6b8ce08848ab95d8c33ab2fc22a.jpg)
Sent from my iPhone using Tapatalk
-
Have you considered a crane? My crane guys only charge per hour and $120 bucks in time and safety go a long ways. Plus he could pick it up and set it down where ever you want with out damaging equipment, the weight might not work so well in that new gravel road. But maybe it needs compacted too
Sent from my iPhone using Tapatalk
-
I think it would be kind of hard to pick up the container with the tree cover it already has?
-
I say let Charles use the splitter. We could start a wager if there are any takers?
I'm leaning against this working at the moment for the record. I owned a 40 ton splitter and have stalled it out more than once so even though it states 40 ton or less in Charles case I'm not sure that is relevant to this equation. Interesting non the less though, good luck Tex!
-
If I lose I win a Darwin Award. What to I win if I win?
Sent from my iPhone using Tapatalk
-
Can't you rig a long line on the go handle of the splitter. You then could get out of the path of flying chain or hot oil from broken lines. If you win the container ends up where you wanted it and you get an I told you so moment. :beercheers:
-
A couple of pipes on rr ties and you could push it almost by hand.
I moved a 2900# shed on grass with a quad. Shed was on 4 x 4” pipes moved quite easy.
I’m all for Darwin videos, but not at TRN’s expense...
-
It’s getting heavier
(https://uploads.tapatalk-cdn.com/20180708/b571564c6f4399cf6cb82d06e80e642a.jpg)
Sent from my iPhone using Tapatalk
-
Yeah that should work fine .
I was trying to picture how you were going to attach it since I've never owned, or used a log splitter before. Probably have to make sure the tail end of the beam can't flip out of the strap.
...as long as you quit adding crap, like, we don't want the next pic to show a concrete floor and a lead liner around the perimeter.
Sent from my Pixel using Tapatalk
-
If I lose I win a Darwin Award. What to I win if I win?
Sent from my iPhone using Tapatalk
Hardy handshake and a toothy smile!
-
Charles, if you are going to use the splitter use only chains. The strap will stretch more than you think it will and you’ll go almost nowhere very slowly.
-
Well you won’t have to wait long. Tomorrow the container gets moved. Got a buddy coming up to help.
Also picked up a trencher and conduit to run electrical and Ethernet
(https://uploads.tapatalk-cdn.com/20180714/83a6e5bb1cb2d9c495d752dce590c1c4.jpg)
Sent from my iPhone using Tapatalk
-
(https://uploads.tapatalk-cdn.com/20180714/179c91e7ec0b53e846fe3a29a01153d6.jpg)
Well that was easy
2 1/4 inch pipe. RR ties for runners.
Shove it with the tractor. Set it back down. Done.
Have video later.
Sent from my iPhone using Tapatalk
-
And started on trenching. More like root clearing. It is slow going.
(https://uploads.tapatalk-cdn.com/20180714/455f61179580162ddf58387f7d02dbea.jpg)
Sent from my iPhone using Tapatalk
-
(https://uploads.tapatalk-cdn.com/20180714/179c91e7ec0b53e846fe3a29a01153d6.jpg)
Well that was easy
2 1/4 inch pipe. RR ties for runners.
Shove it with the tractor. Set it back down. Done.
Have video later.
Sent from my iPhone using Tapatalk
Bummer, wanted to see the log splitter in action.
-
:tongue
-
(https://uploads.tapatalk-cdn.com/20180714/179c91e7ec0b53e846fe3a29a01153d6.jpg)
Well that was easy
2 1/4 inch pipe. RR ties for runners.
Shove it with the tractor. Set it back down. Done.
Have video later.
Sent from my iPhone using Tapatalk
Bummer, wanted to see the log splitter in action.
Yeah. You’re no fun if there isn’t any carnage for the peanut gallery. Looking good!
Sent from my iPad using Tapatalk
-
Break time. Thermometer says 97 already. Finished the inside except the base board
Now working on conduit and sub panel
(https://uploads.tapatalk-cdn.com/20180715/c62fb687853060b42d6d929859d5ff4d.jpg)
Sent from my iPhone using Tapatalk
-
What color are you going to paint the inside ?
Sent from my iPhone using Tapatalk
-
Ok
Drilled the container to mount the sub panel and route the wiring inside.
(https://uploads.tapatalk-cdn.com/20180715/1e9b53de5271e28247262553722006fa.jpg)
Got about 90 ft of conduit laid and another 40 feet to go. Break time for bible study and to cool off
(https://uploads.tapatalk-cdn.com/20180715/66a6140bf93a81063a06587c71927bad.jpg)
Sent from my iPhone using Tapatalk
-
What color are you going to paint the inside ?
Sent from my iPhone using Tapatalk
Haven’t decided if I’m going to leave it alone or paint it white for reflectivity.
Sent from my iPhone using Tapatalk
-
Ashley and his wife just gutted a place and redid the whole house here a year or so ago. She has a large craft room of similiar size to your container. They just sealed up the osb and it turned out very nice.
-
Interesting. The printed side(the side I have out)Seems to have some sort of sealant on it. It certainly looks different than the other side.
I have 7led light fixtures going in it that are 4 ft long and 4400 lumens each. I’m Thinking it will be plenty bright.
Sent from my iPhone using Tapatalk
-
I think it would function better painted personally but that’s me
Sent from my iPhone using Tapatalk
-
Break time. Thermometer says 97 already. Finished the inside except the base board
Base board!?!? IN A SHIPPING CONTAINER!? :shocked:
-
well if you notice there is a gap at the bottom. This is a 9'6" high cube and when I dropped the ceiling enough to spray foam insulaion and install a ceiling it happened to come out to 8'3-1/2" so perfect space at the bottom for a 1x4 base board to finish the wall and provide a good protection at the bottom of the particle board.
-
Interesting. The printed side(the side I have out)Seems to have some sort of sealant on it. It certainly looks different than the other side.
I have 7led light fixtures going in it that are 4 ft long and 4400 lumens each. I’m Thinking it will be plenty bright.
Sent from my iPhone using Tapatalk
With that many lights some might call that a tanning bed. :beercheers:
-
Looking good Charles! :likebutton:
-
Hey Tex, keep the dually and do a 6-door conversion?
(https://uploads.tapatalk-cdn.com/20180719/488e297fd74c121fb0df2261fb5bd0e1.jpg)
(https://uploads.tapatalk-cdn.com/20180719/8c4345cf8b7e5c7bd09b2a75ffd79ca3.jpg)
Sent from my iPhone using Tapatalk
-
If you could do an eight door conversion on it, I might be interested. At least then there would be enough seats for everyone in the family. Of course I might need escort vehicles and a couple of people with flags for directing parking in the grocery store lot.
Sent from my iPhone using Tapatalk
-
Alright. 104 here today but still going at it. Just a lot slower and more water breaks.
Wall unit mounted and hoses and wire through the wall
(https://uploads.tapatalk-cdn.com/20180721/d51dc74ea0389d61cc62821c31ded91c.jpg)
Everything connected except wiring
(https://uploads.tapatalk-cdn.com/20180721/30168a5e44cc0d32a63ab180c5e5d6aa.jpg)
Vacuum pulled and held so good to go there.
(https://uploads.tapatalk-cdn.com/20180721/7492c0d0f0e2b0349f229692e2b12759.jpg)
Now about to pull cable to the sub panel so I can make all the electrical connections. Hope to be in AC late tonight.
Sent from my iPhone using Tapatalk
-
If you could do an eight door conversion on it, I might be interested. At least then there would be enough seats for everyone in the family. Of course I might need escort vehicles and a couple of people with flags for directing parking in the grocery store lot.
Sent from my iPhone using Tapatalk
I found this post interesting, the two main points being the amount of people in the family & in the next sentence the grocery store! :tongue:
-
:likebutton: looking good Charles!
-
(https://uploads.tapatalk-cdn.com/20180721/3d01bb4ed5fef1081086937586348b57.jpg)
Sub panel connected. Drove an 8 ft ground rod for local ground. Need a ground buss for the inside of the panel and some grounding clamps.
I Jerry rigged the ground enough to get the ac running. Hose clamp and solid wire to the rod and since I’m just running the AC at the moment I attached the ground for that circuit directly.
Will make a run to the store tomorrow and get a few things and also get a light circuit going
Sent from my iPhone using Tapatalk
-
Went and checked on the seacan and it was downright cold in there! Less than 2 hours running and it went from 100 to 72. Its going to be a lot better to run lights and electrical in the cool air.....
-
Nice work Charles. I am sold on split systems. You could paint the walls red?
-
Jr that’s my first mini split and I am amazed. It’s super quiet and very effective.
Sent from my iPhone using Tapatalk
-
I would venture to say its efficient because of the spray foam insulation?
-
It’s effective because of the insulation. It’s efficient because it’s inverter powered variable speed compressor.
In any event it works.
Put a brisket on last night at 6. Pulled it at 165 internal and wrapped it and put it in the oven at 225. Then put 4 racks of ribs on at 6. Family coming over at 12. Should be good to go.
Sent from my iPhone using Tapatalk
-
Tex what is this putting it in an oven? I guess after it gets smoke flavor it’s good to cook in an oven?
Sent from my iPhone using Tapatalk
-
As a general rule, meat will only take on smoke for about 3-4hrs (remember, the smoke ring is the byproduct of the chemical reaction of smoke/oxygen/meat). Also at 165 deg (or as some call it, "the stall") is where the collagen starts to breakdown and liquify in the meat/muscle fibers.
Once the brisket hits this point, it is very easy to wrap it and finish it in the oven at a very low temp like 225 deg. You are able to catch a few hrs of sleep, you dont have to worry about staying awake because of the fire you have burning, etc, etc.....
-
So the same can be done with butts then too
-
Correct.
I do mine to 165, then cover to finish. But i also do mine in steamtable pans
-
Correct.
I do mine to 165, then cover to finish. But i also do mine in steamtable pans
Copy, I use those same pans buying in bulk at Costco
-
Correct.
I do mine to 165, then cover to finish. But i also do mine in steamtable pans
What?
Sent from my iPhone using Tapatalk
-
Correct.
I do mine to 165, then cover to finish. But i also do mine in steamtable pans
What?
Sent from my iPhone using Tapatalk
Everything i cook in my smoker gets cooked either on a pan or in a pan to make cleanup a lot easier.
Or were you asking about the pans?
-
Not sure what a steam table pan is. I use the throw away tin pans for things from time to time
Sent from my iPhone using Tapatalk
-
The metal pans that are used on a steamtable.....like a buffet line.
https://www.google.com/search?ei=MJ1UW-qOGaWb_QbYnr2gBQ&q=steam+table+pan&oq=steam+table+pan&gs_l=mobile-gws-wiz-serp.3..0l5.50283.58958..60744...0.0...560.2527.20j0j1j0j1j1......0....1.......3..41j0i131i67j0i131j0i67j46i131j46i67.jaCM8tR-gsQ
-
Yes they cost a little more, but they are reusable and your not wasting/throwing money away like the aluminum pans
-
Well heck, I thought you were talking about the throw aways...
-
See are t we all glad I asked
Sent from my iPhone using Tapatalk
-
Nate what do you use to keep the meat up off the bottom so not to soak in the grease and drippings?
Sent from my iPhone using Tapatalk
-
It’s effective because of the insulation. It’s efficient because it’s inverter powered variable speed compressor.
In any event it works.
Put a brisket on last night at 6. Pulled it at 165 internal and wrapped it and put it in the oven at 225. Then put 4 racks of ribs on at 6. Family coming over at 12. Should be good to go.
Sent from my iPhone using Tapatalk
Just wonderful, what you have going on down there in that infernal heat!
-
I use these
https://www.google.com/search?ei=oa5UW83eEYPajwT9vpawBg&q=steam+table+pan+wire+racks&oq=steam+table+pan+wire+racks&gs_l=mobile-gws-wiz-serp.3..0i71l5.924267.928049..929147...0.0...0.0.......0....1.twG269zcYN4
They make them for the different size pans as well. You can find a limited selection at sams or costco, but i get mine from an actual restaurant supply store.
-
Thanks Nate. I’ll go by the restaurant supply.
In the mean time
(https://uploads.tapatalk-cdn.com/20180722/9afd0aa68e6021adc1348b1c09b1e93a.jpg)
My family says they’ll keep me around a while longer.
Sent from my iPhone using Tapatalk
-
Talking about a thread going sideways........
...and not a single one of you said anything about the three runs of Red wire.
That's a heck of a man cave Charles. :likebutton:
-
Why would we say anything Ken? He had the ground labeled, kinda hard to screw it up otherwise... :wink:
-
The color is what I was referring to knucklehead!
-
The color is what I was referring to knucklehead!
I’m aware, what difference does the color of the wire make on the two legs of 220 single phase was what I was asking?
-
None on 220 single, as long as its not the ground wire,,,,,,,,,,,,,
-
Ken. They just didn’t get your humor. Red being my favorite color and all. I bought a roll of 500 ft 6 ga and they didn’t have black in stock. Only red and green. And I’d rather have red than green since green is usually ground although any color can be used and still be code compliant as long as neutral is wrapped in white tape.
Sent from my iPhone using Tapatalk
-
I didn’t know about the white tape code, good info
-
(https://uploads.tapatalk-cdn.com/20180723/605c1f5e2b1d7f75b22c7fbd9593a438.jpg)
(https://uploads.tapatalk-cdn.com/20180723/6ce482e4df90a5ea05e6e6762c9f83db.jpg)
Today went back and brought the ground up to code and used a 6 ga solid copper ground. Went ahead and grounded the whole seacan too. The. Went back to the condenser and ran liquid right conduit to the condenser and added a weather proof plug. Although technically not up to code since the AC should have a separate disconnect at the wall and the outlet should be in a separate circuit for servicing. Although I am so far outside any jurisdiction and it’s not a living quarters so I’m not worried that anyone will ever worry about it.
Sent from my iPhone using Tapatalk
-
Was the box not already ground to the container via steel bolts or lags?
-
Yes but you can never have too much ground. Amperage through a small screw may not be enough. I feel better with a clamp and wire that will handle 70 plus amps. I’ll add more grounds later when my amateur radio goes in along with antennas. For lighting protection on antenna it requires a lot of grounds. Even 2 inch strips of copper buried in the ground and attached to multiple rods. Along with a shunt that send the electricity to ground should the antenna take a hit.
The station at the main house has an extensive ground system. I have a 70cm/2m antenna at the top of an 80ft pine
Sent from my iPhone using Tapatalk
-
You know, something that is lacking on this site is detail comms info. Just a thought, hint, hint.
-
It’s here. I just need to dust it off and up date some things.
Sent from my iPad using Tapatalk
-
You know, something that is lacking on this site is detail comms info. Just a thought, hint, hint.
Oh, its there, he is just not "Detailing" it...
-
Jr that’s my first mini split and I am amazed. It’s super quiet and very effective.
Sent from my iPhone using Tapatalk
Those are in use every where in Europe and the Middle East, I have never seen them give much problems and always worked well.
-
Jr that’s my first mini split and I am amazed. It’s super quiet and very effective.
Sent from my iPhone using Tapatalk
Those are in use every where in Europe and the Middle East, I have never seen them give much problems and always worked well.
I think the US Army purchased several million of them for we desert campers
I discovered them over there and swear by them! Best idea since the stapler!
-
One of the big things is they are not open to outside air like a standard window AC.
I wold not consider that tin can a ground until grounded like you did.
-
Agreed JR. I am considering some fresh air exchange mechanism since there are no windows and the door is well sealed. I’m sure it would take hours to deplete the O2 but just in case.
Sent from my iPhone using Tapatalk
-
Smart idea. Planning on another and a center area right? Are you painting the outside to blend in?
-
Might add another in the future. I’m just ready to get done with the guest house and seacan and rest for a while.
I have the paint already. Just need to pressure wash and spray.
Sent from my iPhone using Tapatalk
-
Made some progress. Still working. Lights and low amperage outlets are in. Have to do the 20amp outlets in the work area
(https://uploads.tapatalk-cdn.com/20180728/3063c47bd4d38f1a33955864b2c4a63e.jpg)
Sent from my iPhone using Tapatalk
-
Clean work, but why 3 one way and 3 the other?
-
Clean work, but why 3 one way and 3 the other?
Storage at one end with shelving both sides & opposite end work area?
-
Correct Shawn. Actually there are 4 at the work station end. After that pic was taken I bent and installed conduit and double duplex boxes for a separate 20 amp circuit in the workshop area. All I have to do now is pull 12 ga wire and install the outlets. Then I’ll install the 1x4 around the bottom of the walls and sweep and vacuum. Waiting on my shelves to come in so I can get all that set up and then I have to go get my reloading stuff from my bro in laws.
Then on to pressure wash and paint the outside.
Sent from my iPhone using Tapatalk
-
:likebutton:
-
And it sure was nice working in 73 degree space today......since it was 101 and we had a 5 minute shower that upped the humidity to near 100 percent...
-
Charles, I hear you. We’ve had a high in the upper 70’s and it’s been raining every day for last week. I think we hit 74% humidity, this is crap I tell you! I didn’t move to hippy land to deal with humidity. :popcorn:
-
I'd paint those walls white... jus sayin'. The amount of reflective light would make it sooo nice for reloading/gun work.
-
Just 99 hear today, but add that half the state is burning and it feels nasty as heck.
-
I find it interesting that every where there is beautiful mild weather seems to be liberal infestations.
-
I find it interesting that every where there is beautiful mild weather and or a college campus there seems to be liberal infestations.
FIFY
-
Because they’re snowflakes and can’t stand the extremes. Look at Portland... rainy/cool most of the year.
Sent from my iPhone using Tapatalk
-
Sad part is where it burns the snowflakes just visit. Now if LA and SF would take a turn.
-
Here it is. Inside finished.
(https://uploads.tapatalk-cdn.com/20180729/b1e9ffe58a0fa381df82ec6e5dac1619.jpg)
Ken. No need to paint it white. There is 17,600 lumens in the 8x12 workshop area.
Sent from my iPhone using Tapatalk
-
nice
-
:likebutton:
-
Looks good, simple toe kick.
If he painted it the dirt would show,,,,,,,,,,,,,,,,,
-
Raptor line it with a grey ish color.
Sent from my iPhone using Tapatalk
-
I may paint the floor but that's about it. once I get the shelves and reloading and amateur radio stuff in then I can reassess.
I will probably add some fresh air venting that I can control when I'm working.
-
I may paint the floor but that's about it. once I get the shelves and reloading and amateur radio stuff in then I can reassess.
I will probably add some fresh air venting that I can control when I'm working.
I think Don had a solar powered vent fan left over from the tac topper you might be able to score cheap! :popcorn:
-
Wow. Shots fired!
-
Why would you load the place up than think about paint? So you can have to unload it again?
Sent from my iPhone using Tapatalk
-
JR, you sayin Charles is filthy?
-
Nice progress TRN! Looks like a lot of room and well lit! :beercheers:
-
JR, you sayin Charles is filthy?
Its a shed and in Tx, it WILL get dirty.
-
I may paint the floor but that's about it. once I get the shelves and reloading and amateur radio stuff in then I can reassess.
I will probably add some fresh air venting that I can control when I'm working.
I think Don had a solar powered vent fan left over from the tac topper you might be able to score cheap! :popcorn:
^^^ The boy certainly has a long memory ;-/
-
Yesterday I began the process of weaponry relocation (what wasnt already at the hide....err...spa and resort) and moved my big gun safe on the trailer with the help of 2 friends and a furniture dolly. Sketchy for sure. One thing for sure once it was flat on its back on the trailer it didnt need to be strapped to anything....
Bought another smaller safe and put just the essentials in it at the main house so I can fight my way to the next location. My Wilson Combat 870, an LMT AR and a couple of Glocks along with several loaded Magpul 60 round mags, glock mags, in a chest rig and a shell bandolier for the shotshells should be enough. If not then it wouldn't matter anyway since that's all I can carry at once anyway.
This morning I was able to lift the safe off the trailer with the tractor....barely. And now I'm trying to figure out rigging to get it nosed into the seacan door so I can shove it with the tractor. Then I'll get my daughter to help me stand it up on the furniture dolly. When I weighed 30 pounds more I could tip it myself but I just don't have enough weight at 220 to tip it. She put a shovel under the other end and put her weight on it to help and I was barely able to get it tipped.
I also have about half my reloading stuff which took up the entire back seat area in bins and the front seat too. This week I'll get down to my BIL to pick up the majority of my reloading stuff. Looking forward to some berger 175 VLD load development in my 308. And maybe some sub sonic 210 VLD that Ive had sitting around. I need to get another scope for the GAP 300 win mag since I traded off the US Optics I had on it. Then that will lead to a new can cause that bad boy packs a punch. Probably a 338 can to get some extra volume.
That will probably be next year at the earliest since I still need to finish the inside of the casita
-
(https://uploads.tapatalk-cdn.com/20180804/c395e899038f4ab5f28e95c960d2b10a.jpg)
And this is my reloading bench I’ll be retrieving this week along with my other reloading supplies.
(https://uploads.tapatalk-cdn.com/20180804/7cafd35b46b44c18eb53705e5ab7634a.jpg)
(https://uploads.tapatalk-cdn.com/20180804/3fe06b9b468b03c667dbf01c06fcbfe8.jpg)
Sent from my iPhone using Tapatalk
-
Rollers Charles, 3/4” pipe I’m sure you have some around.
Slope the grade if it isn’t to be flush with door, couple planks or sheet of ply and a few chunks of pipe. Roll to location and stand it up.
-
Does your door not come off in any way? I know your safe isn’t cheap like mine but that is a selling point to me was that the door came off
Sent from my iPhone using Tapatalk
-
Dowels vs pipe, won't tear up the finish. I had to use 2 dolly's, one wasn't strong enough or steady enough upright.
-
good luck man, I know my new safe (National Safe ) was all two guys could handle from the truck through the garage into the wreck room. After all was said and done, it looks nice either from the room or outside looking in. If it is druggy, they want it now, so will move along to the neighbor hopefullyr, if not, well they would find it anyway.
-
So my question is........why are you trying to kill yourself when you can rent stuff like this?!?!?!?!
https://www.sunbeltrentals.com/equipment/detail/1225/0440098/stair-climber-1500lb/
-
Good info, didn’t realize they rented those.
-
Dowels vs pipe, won't tear up the finish. I had to use 2 dolly's, one wasn't strong enough or steady enough upright.
Dowels much better idea.
Now the rental dolly looks like the real deal.
-
So my question is........why are you trying to kill yourself when you can rent stuff like this?!?!?!?!
https://www.sunbeltrentals.com/equipment/detail/1225/0440098/stair-climber-1500lb/ (https://www.sunbeltrentals.com/equipment/detail/1225/0440098/stair-climber-1500lb/)
Why not just hire the safe sales place to move it for you, less to worry about and they know what they can and can not do?
-
I had to pay 600 to have mine delivered Bob, and that was only 65 miles. Pretty sure they charge by the pound, and mine weighs 1600 lbs . Lol
Sent from my Pixel using Tapatalk
-
Then his hide place wouldnt be a hide any more
-
I think getting into the container is the trick. When I got mine we laid it down for the ride home. Getting it out and upright was the work and I painted the bottom which was done at the factory.
Once upright in the garage it was easy on 2 dolly's, left it on the pallet!
-
Then his hide place wouldnt be a hide any more
The pool company, sod company, the day labors, the drywall folks, conex delivery driver, cable company
All them know where the “Hide” is lol
Sent from my iPhone using Tapatalk
-
Unless they never left,,,,,,,,,,,,,,,,,,,,,,,,
-
Like I tell the girls about dating,
Daddy has a backhoe a bag of lime and I live next to 18,000 acres of national forest
Sent from my iPad using Tapatalk
-
So I had this old work bench with butcher block style top I’d had stored in the shop for 4 years and dusted it off and sanded the top and applied porch paint to it. Second coat this morning and then I’ll clean the base and reassemble. I think I’ve lost some of the leveling feet so we’ll see how it sits when it goes in the seacan
(https://uploads.tapatalk-cdn.com/20180805/7e412ee3bfb773385eb672ab5bf38af9.jpg)
Sent from my iPhone using Tapatalk
-
Well pressure washed the entire seacan including the top. Gonna spray it tonight or tomorrow. Will likely leave the top alone until I can get some edpm coating to roll on it.
Then I’ll put the big circle and H on top so Don can land
Sent from my iPhone using Tapatalk
-
Suppose he can trim the trees on the way in. :Bugeyes
-
I resent that! I just have a hatred for lawnmowers.....
Sent from my iPad using Tapatalk
-
I think you might have misunderstood my jab at Don....think rotors vs pine trees. Lol
Sent from my Pixel using Tapatalk
-
Getting ready for all that now. Shows no interest for now in front of us but it is there.
Tell them I am retired cop and I know how to hide the body.
-
Love airless sprayers. Hate running short of paint.
Needed about another half gallon
(https://uploads.tapatalk-cdn.com/20180805/54e572b0cbf6e23cc12d077063d7354c.jpg)
Sent from my iPhone using Tapatalk
-
Charles, did you weld the clasps on those end doors?
-
Not yet. There’s a metal plate(visible in the middle of the doors) that I’m going to weld that will connect the two doors together. Might as well tack the clasps too.
Sent from my iPhone using Tapatalk
-
That green will look great dirty,,,,,,,,,,,,,,
-
At least I didn’t paint it red....
Sent from my iPhone using Tapatalk
-
At least I didnt paint it red....
you are correct! But we all know that the thought entered your mind and was most likely demolished by HH6 when she saw the gleam in your eyes.......HAHAHAHAHAHA
-
Well pressure washed the entire seacan including the top. Gonna spray it tonight or tomorrow. Will likely leave the top alone until I can get some edpm coating to roll on it.
Then I’ll put the big circle and H on top so Don can land
Sent from my iPhone using Tapatalk
Funny, but over at the BlackWater Compound in N.C. they use a SeaCan with an "H" on the topside to train new littlebird pilots to land to...Similates landing on the superstructure of a ship...which they may or may not own several of...
-
Well I painted myself into a corner....
Since I had to go to town to get more paint I went ahead and got enough to paint the top and a second coat on the side facing the shop since I got a little skimpy when I tried to stretch to the end .... and ran out anyway.
You’ll have a hard time finding it now don unless it’s giving off a heat signature
(https://uploads.tapatalk-cdn.com/20180806/a290e09899e463ad18bb86c62585078d.jpg)
Sent from my iPhone using Tapatalk
-
(https://uploads.tapatalk-cdn.com/20180806/2be6e3a64d767ae32e0345cb767fed77.jpg)
Sent from my iPhone using Tapatalk
-
You’ll have a hard time finding it now don unless it’s giving off a heat signature
Sent from my iPhone using Tapatalk
Just look for the cabana boys and fu fu drinks...... :tongue:
-
Only if Ken happens to be here :wink
Sent from my iPhone using Tapatalk
-
Well with all those trees, Don won't be landing anything on there except for a paper airplane!
-
Yeah I tipped the driver well for threading the needle and getting it back there.
Sent from my iPad using Tapatalk
-
So today I’m having another belly dump of crushed limestone delivered which hopefully will get me 90% done with the driveway.
A little loader work is in my future
Sent from my iPhone using Tapatalk
-
Watch out for boulders coming through your windshield will ya. Seems to be a thing these days
Sent from my iPhone using Tapatalk
-
Lol. No windshield, no cab , no AC. Doing it like a real man!
(Ps and the rocks are 3/4 inch. )
Sent from my iPhone using Tapatalk
-
Lol. No windshield, no cab , no AC. Doing it like a real man!
(Ps and the rocks are 3/4 inch. )
Sent from my iPhone using Tapatalk
Shots fired! :tongue:
-
So today I’m having another belly dump of crushed limestone delivered which hopefully will get me 90% done with the driveway.
A little loader work is in my future
Sent from my iPhone using Tapatalk
In my minds eye, I can see that SVL-95 of mine back dragging
You won't believe how nice a job a rubber track machine can do spreading gravel and leveling a driveway
I see one in your future
Just a good used SVL-75, 90, 95 or a Cat 279, 289, 299 or similar... (Get a wide track machine, stay away from the smaller ones)
-
Lol. No windshield, no cab , no AC. Doing it like a real man!
(Ps and the rocks are 3/4 inch. )
Sent from my iPhone using Tapatalk
Hey, I was a real man once...I have pics to prove it! ;-))
-
Lol. Would I ever make fun of Don??
Wait, don’t answer that.
This showed up at 07:00
(https://uploads.tapatalk-cdn.com/20180807/2ff6386e885cf369e7d741003db18fec.jpg)
Think I need one more to finish
Sent from my iPhone using Tapatalk
-
Lol. Would I ever make fun of Don??
Wait, don’t answer that.
This showed up at 07:00
(https://uploads.tapatalk-cdn.com/20180807/2ff6386e885cf369e7d741003db18fec.jpg)
Think I need one more to finish
Sent from my iPhone using Tapatalk
I'm gonna fire ya for something...Just as soon as I come up with something...
-
I’m just jealous Don. Pay no mind. ;-)
Sent from my iPhone using Tapatalk
-
I continually under estimate. Need one more load but can’t get it until next week.
(https://uploads.tapatalk-cdn.com/20180807/580c6c5606c2296060ce3775a4e3d0cb.jpg)
On top of that I have a puncture in the left front tire. Will keep air in it and hopefully finish working and then take it somewhere to be tubed
Oh and the dually makes a nice compactor for the gravel.
Sent from my iPhone using Tapatalk
-
Carrep
Got my first puncture on the tractor tire. You guys with tractor experience think a plug is ok?
Sent from my iPhone using Tapatalk
-
bias ply tires accept plugs very well. steel belted radials chew them up a bit and tend to work loose. just rasp it good and jam the thickest one you can get in there. it's a temporary fix at best though and will lose air over time.
-
Like Tate said, it’s a get you by fix until you patch it & tube it.
-
Carrep
Got my first puncture on the tractor tire. You guys with tractor experience think a plug is ok?
Sent from my iPhone using Tapatalk
Heck yea!
A tractor tire without at least one plug is unused!
-
Carrep
Got my first puncture on the tractor tire. You guys with tractor experience think a plug is ok?
Sent from my iPhone using Tapatalk
Heck yea!
A tractor tire without at least one plug is unused!
Don buys them by the gross, probably basket weaves them together prior to installing them in fist sized punctures! :popcorn:
-
On those little tractors I just un mount them and toss a patch on them, good as new.
I do use plugs on my skid loader...I have ine very bald very well used tire on there with more than 20 patches/plugs LoL
-
I have a bunch of plugs in the front tires of the 4720, none in the fluid filled rear tires, and some more in all four tires on the JD2720
-
Norms probably got those tractor tires figured out, but if you've ever tried to replace one, or break one down, by yourself, you'd probably burn the tractor to the ground.(my local tire shops will do them, but only if you pay a healthy premium)
I guess what I'm trying to say is stick a plug(s) in it. Some holes require multiple...I've even used a sock one time. lol
-
Yeah I’ve heard about how hard they can be to break down and re seat. The hole is fairly small so I may have to drill it out a bit first. I’ve always preferred patches
Sent from my iPad using Tapatalk
-
Yeah I’ve heard about how hard they can be to break down and re seat. The hole is fairly small so I may have to drill it out a bit first. I’ve always preferred patches
Sent from my iPad using Tapatalk
Don't over think it.
Ream, shove in a plug and as they say in the New Yark
"Forget ah-bout it"
-
Been off all week and getting things done.
Installed my old spare window unit in the casita to make working inside bearable as it’s back to upper 90s and humidity this week. That unit has been around for 10 years as an emergency backup for hurricanes and power outages. Well worth whatever I spent on it. Will be putting up the pony walls upstairs to make the code compliant 5 ft minimum wall height and create storage space.
(https://uploads.tapatalk-cdn.com/20180808/400fd119911f054adeebdb9f447c8380.jpg)
Caulked the entry door to the seacan and then made a step out of a piece of RR tie and 2x12
(https://uploads.tapatalk-cdn.com/20180808/39f5bacb239c0c1af4720ba7b3eb1da9.jpg)
Then put up a new feeder
(https://uploads.tapatalk-cdn.com/20180808/f2e44481f4e834863b2fcfc244e97f23.jpg)
Gonna make fried chicken fingers for my helper. Youngest has been hanging out with me all week.
Oh and I spread topsoil and made a stone path to the garage and will spread some seed to get grass growing.
(https://uploads.tapatalk-cdn.com/20180808/27ab4511919fb47545d59e7811bc973f.jpg)
Tomorrow I’m hoping my shelving units finally show up and I’ll get my reloading set up from my BIL place.
Sent from my iPhone using Tapatalk
-
So much progress!
Need to purchase one of those window units as well...
-
Anyone else seeing double posts? And missing posts? The post with the pics of the AC and feeder etc disappeared?
Sent from my iPhone using Tapatalk
-
everything is kosher on this end? try a restart of whatever device, and if it persists give me a call.
-
Weird. Now it’s showing.
Sent from my iPhone using Tapatalk
-
Anyone else seeing double posts? And missing posts? The post with the pics of the AC and feeder etc disappeared?
Sent from my iPhone using Tapatalk
Looks OK on my puter
-
I have been getting double posts when I read things, also things that pop up out of order than re shuffle later. Who knows.
Sent from my iPhone using Tapatalk
-
I’ve been using Tapatalk exclusively this last week and this morning it would throw an error when I’d post something and act like it didn’t post, but then the post would go through... seemed fine over on DF when I posted some stuff last night.
Sent from my iPhone using Tapatalk
-
I have been getting double posts when I read things, also things that pop up out of order than re shuffle later. Who knows.
Sent from my iPhone using Tapatalk
I had a tech guy put a virus on your account
Sorry...
or
Maybe I didn't
;-))
-
Dave,
BTW, the thing sometimes does not allow me to add a second post
Like when first I start chewing on your butt for screwin' up again
Then the second post, where I fired you, somehow doesn't show up
Weird!
Same thing happened with Shawn for a long time
I don't get it...
But, seriously, I watch peeps try to register, then nothing comes through. As if there is some filter blocking them. Makes me thing the devil is at work keeping good men from joining up with other strong men in the name of the Lord.
Sounds like something he would do...
-
Ok. Today I disassembled the reloading bench and cut 12 inches off the depth from 36 to 24. Got that installed in the seacan and started assembling the shelving units. Rest
Of the family came up and so the youngest and me cleaned house and tidied up so mama didn’t feel like she had to clean when she got here.
(https://uploads.tapatalk-cdn.com/20180811/dc35736dae14e48bdaac7772d6e7b1d2.jpg)
3 done and now on to the 3 on the other side.
(https://uploads.tapatalk-cdn.com/20180811/b0035397750ce81ecf103883132db788.jpg)
Sent from my iPhone using Tapatalk
-
Well developed space there
But
Its giving Nate, Me, Bobby and Sean the shivers
We lived out of those things! You're bringing back memories of a plywood life at 20 and 40 feet...
-
I actually kind of like it. No windows and quiet space. My family thinks I’m anti social
Sent from my iPad using Tapatalk
-
I like it, I need a couple & some land to sit them on too.
-
I think two next to each other with some big holes in the middle would be nice, otherwise it closed in real fast and in the photo I feel trapped
Sent from my iPhone using Tapatalk
-
So apparently Obama made me a hoarder. Most of this stuff I haven’t seen in four years.
In this pile is 55,000 primers and 103lbs of powder and 20,000 projectiles.
(https://uploads.tapatalk-cdn.com/20180811/35aa9dd8e18249efabf0890b74b74536.jpg)
In this pile is 15,000 rounds of brass
(https://uploads.tapatalk-cdn.com/20180811/201b89bb0385b5d12a2259d1ff6dec5f.jpg)
And I apparently have a nice reloading set up. Bad thing after not using it in four years I need to go through setting and calibrating it all over. Same with the brass. Not sure which was fully prepped/sized and what wasn’t.
(https://uploads.tapatalk-cdn.com/20180811/2efe3329cb627b53c649ee2f16c7b4de.heic)
Got the shelves done this morning too
(https://uploads.tapatalk-cdn.com/20180811/f98a636275fdc328c1abd87fa13bea17.jpg)
Sent from my iPhone using Tapatalk
-
Good Golly, Miss Molly!!!!!!!!!
-
Yeah. Need to do some shooting. That doesn’t account for the loaded rounds I’ve hoarded. I’d be embarrassed to admit what I have stored in loaded rounds.
Sent from my iPhone using Tapatalk
-
you may want to get some boards cut and put on those shelves with the particle board. those things will start to bow in about 3 months.
-
Only thing missing is a fire suppression system!
Sent from my Pixel using Tapatalk
-
Since I’m storing my surplus fireworks that might not be a bad idea. Halon pipe right down the outside long wall. Shouldn’t take much in an enclosed space like that.
Now I have the can finished and I’m filling it up with stuff the kids are asking questions. Interesting convo with them about my concentric circle planning and where the next piece of property will be for the last circle. I did have to detour a bit to “resort up” the place because life with kids, ya know!
They used to joke about my “phases” as they would call them. Weapons, reloading, HAM radio, Ready Store, etc. now they are starting to see all of it put in order in the “plan”
Will run inventory on all my stuff with a eye towards one year self sufficiency here. Next step is looking for some acreage in ID or MT as the last and final circle.
In retirement it will be the summer get away from the heat for a couple months and the permanent get away if something really really bad happens
Sent from my iPhone using Tapatalk
-
That shipping container give a whole new meaning to "A Can of Whoop A**" :likebutton:
-
Looks sweet. Nice set up and I will bet it great to get everything out of storage.
Sent from my iPhone using Tapatalk
-
Since I’m storing my surplus fireworks that might not be a bad idea. Halon pipe right down the outside long wall. Shouldn’t take much in an enclosed space like that.
Now I have the can finished and I’m filling it up with stuff the kids are asking questions. Interesting convo with them about my concentric circle planning and where the next piece of property will be for the last circle. I did have to detour a bit to “resort up” the place because life with kids, ya know!
They used to joke about my “phases” as they would call them. Weapons, reloading, HAM radio, Ready Store, etc. now they are starting to see all of it put in order in the “plan”
Will run inventory on all my stuff with a eye towards one year self sufficiency here. Next step is looking for some acreage in ID or MT as the last and final circle.
In retirement it will be the summer get away from the heat for a couple months and the permanent get away if something really really bad happens
Sent from my iPhone using Tapatalk
Having been through both of those states in the last week, the heat during summer isn’t much less than Texas. Still hits the low to mid 90’s. The southern parts of both are pretty blah, but up north it is very nice.
We’re contemplating moving to Montana...
Sent from my iPhone using Tapatalk
-
I’m thinking up near Grangeville at some altitude. Much cooler there than Boise. Finding the right piece of land will be the trick. Has to be in the area where it gets sufficient rainfall for crops and high enough elevation to be cooler and flat enough in at least 1 acre to be farmed.
Sent from my iPhone using Tapatalk
-
I was really surprised that our new place up there hit *102 last week. That's pretty hot for the panhandle area me thinks, especially when it was in the upper *90s here.
Sent from my Pixel using Tapatalk
-
Black hills Dakota. Let’s all be neighbors
Sent from my iPhone using Tapatalk
-
I was really surprised that our new place up there hit *102 last week. That's pretty hot for the panhandle area me thinks, especially when it was in the upper *90s here.
Sent from my Pixel using Tapatalk
Yes it was hot up there Ken. Spent 3 days in the area last week. That is some very nice country for sure and that new mini will surely help the looks of your new place.
-
You know Charles, if you're only attempting to plant an acre the actual amount of rainfall wouldn't be that important as long as you have a good well. At my farm in Indiana we installed a windmill powered hand pump which the design also could build pressure. IE you could run a small irrigation off of it if you had wind. The amish still make them and some have them plumbed into their house and a pressure tank for indoor plumbing.
-
Shawn that sounds interesting. As I learn more about space requirements I may have to increase that area but I think that’s sufficient for my family.
Sent from my iPhone using Tapatalk
-
Welded up the latches in the seacan
Put the gutter on the front of the porch on the casita and then started installing the knee walls upstairs and finishing out the storage space with OSB
(https://uploads.tapatalk-cdn.com/20180819/95c6ba579dfa802ab77c80223101ff34.jpg)
Sent from my iPhone using Tapatalk
-
Looking good!
-
I like
-
Impressive collection C
Idaho....is basically Colorado light. Another 10 years it will be a mess i'd bet.
just food for thought
-
Nice work Charles. Whats wrong with hoarding a little,,,,,,,,,,,,,,,,,,,,,,,,,,
-
What’s interesting is that the seacan fulfills the original mission of climate controlled storage and reloading facility. The casita is full on mission creep and has taken on a life of its own. Next month will be one year since I started the structure. I’m tired of working this project and am ready for it to be done. It’s much bigger Than I imagined and weighing on me like a brick. It’s taken most of my free time and I’m ready for it to be over.
Oh, and I just threw on some ribs for a little team meeting at the office today at 11
(https://uploads.tapatalk-cdn.com/20180820/09061348c384307cccee6c411408b0ed.jpg)
Sent from my iPhone using Tapatalk
-
can I work for you?.... from home? Wait then I would miss out on the food...ugh
-
can I work for you?.... from home? Wait then I would miss out on the food...ugh
:likebutton:
-
Food porn
(https://uploads.tapatalk-cdn.com/20180820/4957451df8032e2b928753316974e1c8.jpg)
Sent from my iPhone using Tapatalk
-
So I'm getting ready for sheetrock. This I will sub contract to guys that do it for a living. 2000 to rock it, tape and float and texture. I have to supply the rock. 1650 sq ft of rock so I think its reasonable.
-
(https://uploads.tapatalk-cdn.com/20180826/62a95079ba01028ba53f45e46ac97f9d.jpg)
For the ceiling I dropped the ceiling down by about 10-12 inches so I could install recessed cans
Sent from my iPhone using Tapatalk
-
Smart move Charles to have the sheetrock done by others. Sure looks good, a lot of work but it shows.
-
I would pay that in a second again, it is hard work!
-
So I’m trying to make sure that everything is ready for Sheetrock.
Going to use a composite shower basin that is made by KBRS and guaranteed never to leak. It gets set in thinset and then tile over it. I got the corner seat and shampoo niche as well.
Also had to install a few outlets outside on the porch and the rear where a the AC is going to be.
I have 1 inch smurf tube coming in from underground conduit for cat 6.
I plan to make the casita the nerve center for the network. The 100mb connection will start in the main house and switch will send internet to the casita where another switch will distribute network cameras, a wireless access point, and send internet to the shipping container where more cameras, internet and distributed TV will be.
All the AV sources will be in the guest house and a matrix switch will send any of the 4 sources to any of the 4 TVs. 2 in the main house, one in the guest house and one in the shipping container. TV will be sent over CAT6 to bakuns.
Here is the smurf tube where it enters. It goes up and across and to the upstairs storage where all the computer rack stuff will be
(https://uploads.tapatalk-cdn.com/20180902/dd0263fcad49b8ebbf9c052423269ae1.jpg)
Ran out of romex so went to Lowe’s to get more and will finish the upstairs wiring tomorrow along with the ceiling fan mounts and can lights.
Sent from my iPhone using Tapatalk
-
Sounds like plan. What about internet/wifi in the tin can? Wifi might not work in there so will it be hardwired?
-
Yes. The can will have a WiFi access point and will probably have a cell phone repeater like the one in the main house since no signals get through. Although I do like being un reachable
Sent from my iPhone using Tapatalk
-
Sometimes I miss the days b4 cell phones.....
-
Sometimes I miss the days b4 cell phones.....
Hey Shawn - push that button on the side for awhile and POOF you’re unreachable!
-
Not the same, I can drive up in the mountains and do that too in many places.
You know the days when you had a landline phone with a tape recorder attached. The really nice part was if you didn’t want to be reached then someone else in the house must have deleted that message......
As the saying goes you don’t know what you had until it’s gone!
-
:beercheers: :grin:
-
Here’s the KBRS shower basin. One piece some kind of foam core with composite material covering it. It better be good. This shower pan was $600
(https://uploads.tapatalk-cdn.com/20180902/75432a31b86e50ff10732330d4bca2ee.jpg)
It has the curb molded in which should make for a stable curb. Most showers have trouble keeping tile on a site
Built curb when it’s wood with membrane
Also added a double stud where the tile backer will end and the Sheetrock begins to give me solid place to anchor the shower doors.
Sent from my iPhone using Tapatalk
-
Finished roughing/finish electrical upstairs. Outlets and lights in the storage space behind the knee wall are done and tied all the commons and grounds in the 3 gang box for lights and fans
It’s a good thing I double checked before Sheetrock. I found I omitted a piece of romex that I needed to tie the storage area lights on one side to the other. That way I have one switch that turns on the storage lights all together. Would have not been able to tie those together after Sheetrock.
Double checked all the edges for nailing surfaces and declared it ready for Sheetrock
(https://uploads.tapatalk-cdn.com/20180903/877e11edf7baddedc2477cea116b231c.jpg)
All that’s left downstairs is to install the drain in the shower, lay the pan in thinset and hang the tile backer board and then finish the pocket door framing. All the electrical rough in and vent fan got done Saturday.
Sent from my iPhone using Tapatalk
-
Looks good.
I don't see any steel plates where each stud has a romex running through (to keep drywall screws from hitting wires) it's code out here, no matter how thick the stud is. Not sure what they're called.
Sent from my Pixel using Tapatalk
-
Getting close. When does the ladder go?
-
Looks good.
I don't see any steel plates where each stud has a romex running through (to keep drywall screws from hitting wires) it's code out here, no matter how thick the stud is. Not sure what they're called.
Sent from my Pixel using Tapatalk
Simply called nail plates Ken.
Sent from my iPhone using Tapatalk
-
Yes. Thanks for the reminder. Those were on my list. JR the spiral stairs go in last.
Got the shower pan installed and backer board going up. Pics later.
Sent from my iPad using Tapatalk
-
(https://uploads.tapatalk-cdn.com/20180904/fcca14c4b1fe2a4dc771e50884f5e215.jpg)
(https://uploads.tapatalk-cdn.com/20180904/aa20ae14fcf90a3aa0b3a03408bf3d42.jpg)
Still have to waterproof the seams with tape and sealant and then use thinset to set the corner seat
Sent from my iPhone using Tapatalk
-
Got the pocket door installed and the nail plates on. Ran about 8 short and will get those this week and order the Sheetrock.
(https://uploads.tapatalk-cdn.com/20180909/89658b6dc58deb26e64b1acff8373768.jpg)
(https://uploads.tapatalk-cdn.com/20180909/32f91067e93db0c9fadbee13dccfc1a8.jpg)
Sent from my iPhone using Tapatalk
-
Today the rockers showed up at 7:30. There is a separate crew for hanging and floating/texturing.
It is really starting to look good. I did smile at one compliment today as the rockers talked about how straight and square it was which made it easier to hang the rock.
I also thought i ordered about 5-10 extra sheets just to be sure but they used every last one. It came out perfect. 80 sheets, granted they said a few were buggered but it was good to have some extra!
(https://uploads.tapatalk-cdn.com/20180928/7950a004acda19ae9acc3c6f1b83b74c.jpeg)
Sent from my iPad using Tapatalk
-
(https://uploads.tapatalk-cdn.com/20180928/120ccf5836b0e14e0f8804d337ed6dc1.jpeg)
Sent from my iPad using Tapatalk
-
(https://uploads.tapatalk-cdn.com/20180928/2bb8dddadcadcc12e8c14f729aea326e.jpg)
(https://uploads.tapatalk-cdn.com/20180928/20d5768607eecd9a6cac8cfbd0f1aeec.jpg)
(https://uploads.tapatalk-cdn.com/20180928/858fba08cb36bba6a1b6e3c10d1e339e.jpg)
(https://uploads.tapatalk-cdn.com/20180928/19007774d0140ed23dc293b8c2b187b1.jpg)
Sent from my iPhone using Tapatalk
-
9’ ceiling downstairs? Like advice in many of Don’s threads (ie, too little, too late)... ya know they make 4.5’ tall pieces so you only end up with one seam on those walls? :) Looks good though! Will look even better once it is mudded, textured and painted!
Hope they used screws and not nails on the ceiling pieces. I spent some time last Saturday pulling nails, replacing with screws and repairing about a dozen pops on my ceiling.
Sent from my iPhone using Tapatalk
-
Yeah thanks Ryan. Smh
But since I didn’t hang it I’m not sweating the extra seam.
They did use screws on the ceiling.
Sent from my iPhone using Tapatalk
-
Looks good, let me know when I should plan my trip south to stay and visit! Maybe I can swing over and pick up Ken too... :likebutton:
-
Looks good!
Sent from my iPhone using Tapatalk
-
That's alright Shawn, I'll pass. He said that it's a Casita, not a love shack. Maybe Ryan swings that way....?...(although he'd be distracted by all of the sheet rock seams)
Sorry Charles, looks good.
Sent from my Pixel using Tapatalk
-
Looking good. Throw a little mud and paint on there!
-
Ok. Swept the debris out and measured for the trim and cabinets. Gonna have the trim rough sawn in pine just like the main house.
Finished pulling cable to the seacan and terminated the pull box and sealed it to the outside. Made a drip edge out of some 2x2 angle over the door
Need to work on ordering the AC this evening.
And the mud crew shows up tomorrow am.
Sent from my iPhone using Tapatalk
-
(https://uploads.tapatalk-cdn.com/20181001/f828cbeab11261e4eea0d362be862e35.jpg)
(https://uploads.tapatalk-cdn.com/20181001/5b6b325e16028b38a7bc4f2fb166e03f.jpg)
(https://uploads.tapatalk-cdn.com/20181001/94802e4014827fbef5197bb7a7926826.jpg)
(https://uploads.tapatalk-cdn.com/20181001/dd1ad299b5b0a0319a470bc84bb32a33.jpg)
First coat of mud on. Will be back Wednesday to finish.
Then on to texture.
Sent from my iPhone using Tapatalk
-
Colors don’t match, you might have to paint it. :)
Looks good
Sent from my iPhone using Tapatalk
-
Glad I didn't do it, wouldn't look as good or be done!
-
So I got the PVA primer sealer and broker out the airless sprayer. And man if I didn’t run out of primer mid job and have to make a run into town. But about 8 1/2 gallons later and it’s primed. I’ll roll the ceiling in the morning and start working on the finish electrical
(https://uploads.tapatalk-cdn.com/20181013/cbeeeec3d8aaae5a9e1309359c91a64f.jpg)
(https://uploads.tapatalk-cdn.com/20181013/3b55789b78a7d33fdbd14776133a6677.jpg)
Sent from my iPhone using Tapatalk
-
Seems I used more than I thought too, but they sure work good!
-
Fired up the 5 watt porch lights
(https://uploads.tapatalk-cdn.com/20181014/a1297e32b18618067490eb83d5310882.jpg)
Sent from my iPhone using Tapatalk
-
Looks good Charles :likebutton:
-
That is really looking nice!
-
Looking sharp!
Sent from my iPad using Tapatalk
-
hard to tell but I rolled the ceiling with good ceiling paint this morning and then started on the electrical. Got all the led lights in the cans and all the duplexes installed. Just need some 20 amp receptacles and some switches. I was pleased that all my wiring was where I expected it to be and all the receptacles and fixtures were wired correctly. All breakers on and nothing tripped or burned down.
(https://uploads.tapatalk-cdn.com/20181014/2323ff0ec945f829b048adc93b6169cd.jpg)
(https://uploads.tapatalk-cdn.com/20181014/130027f08c185c87d19d15d4f4948a2f.jpg)
(https://uploads.tapatalk-cdn.com/20181014/2fa94a1f5db2690451963b5b92afe641.jpg)
Sent from my iPhone using Tapatalk
-
Now its the details, but looking good.
-
Having lights light up is a great mile stone imo.
-
Having lights turned on is a better milestone!! I sure wish I had circuit breakers
Sent from my iPhone using Tapatalk
-
Alright. Got switches in and the three way switches for the stairwell light wired.
Bought the pantry/closet door and hung it. Had to buy full size doors and cut them down and build my own frames.
(https://uploads.tapatalk-cdn.com/20181022/28d034a9c9a6f387b2406db9a36f3c38.jpeg)
Took me a while to get the first one made and then the others started taking shape a lot quicker before I ran out of daylight.
(https://uploads.tapatalk-cdn.com/20181022/f97a21005daf6d437898fdae31900e0c.jpeg)
Got the first left hand one set in place. Have to shim and nail tomorrow
(https://uploads.tapatalk-cdn.com/20181022/fb9c86689d2dc9f0ecc8af0bbff8245a.jpeg)
Wired up the stairwell pendant light with a LED 100w equivalent bulb
(https://uploads.tapatalk-cdn.com/20181022/8c3a5360ae973641547ef0499b8d5eb3.jpeg)
Sent from my iPad using Tapatalk
-
I took off tomorrow so I can go down to the saw mill and see about ordering the mill work for the casita. Will hopefully finish making the doors and installing the 20 amp fixtures in the kitchen area.
Sent from my iPad using Tapatalk
-
Really coming together, very nice
-
That’s Turing into be the nice little house man, what are you doing as far as other appliances. ? Fridge? Kitchen area? Shower,
Sent from my iPhone using Tapatalk
-
Thanks guys. Trying to make it match the main house as much as possible.
Will have an apartment fridge, about 24 inches wide and 5 ft tall. Nice sink and disposer and granite counter tops in the bath and kitchen. All the trim and cabinets will be rough sawn pine.
The floor will likely be tile planks that look like wood and Im not sure about the shower yet. I’m not going to match the main house for the shower as I not thrilled with the tile selection in the house.
In the upstairs it will be carpet and bunk beds, Then a metal spiral staircase
Because its on wood subfloor I plan to install an isolation membrane, which will help it last and flex a bit. But of course its twice the work.
Sent from my iPad using Tapatalk
-
Great looking work. The light is on at the end of the tunnel.
-
You gunna live there?
-
Thanks. It’s a guest house. I hope to have the girls have their friends there and we have a couple of families that we are close to that might come visit.
My cave is the shipping container.
Sent from my iPad using Tapatalk
-
My cave is the shipping container.
:likebutton:
-
Finished the electrical. Had to go get 20 amp switches and outlets since the kitchen is all 20 amp branch.
Some numb nuts at Slowes tried to tell me I could use 15 amp outlets and switches. I just walked away. Wast worth arguing.
Finished making my doors. Most went it without a big challenge. One rough opening was a bit tight. I need to take about 1/16 off the edge of the door.
Then went to a local saw mill and ordered 950 linear feet of rough sawn pine. Did a double take when the guy told me $150 for all of it. I was like...SOLD!
(https://uploads.tapatalk-cdn.com/20181022/1a85869d6418dd6ddfee8fcdd83c856e.jpg)
(https://uploads.tapatalk-cdn.com/20181022/1a406b966306be72f1657bc014ba2a94.jpg)
Sent from my iPhone using Tapatalk
-
$150 for that much. Gotta be a typo! Lol.
Looking good for sure.
-
That might be worth the drive!!
-
I REALLY, REALLY, like those doors. Such a wonderful result emerging from all this great work!
-
I may not be that good but at least I’m slow!
Yesterday evening I rented an orbital floor sander and sanded the casita floor to get all the drywall mud and crud off the floor to prepare for tile.
today I built a server for the hide in a 2U rack case. It will be the backbone of the security system and. Misc document storage.
Then I finally installed the matching door to the casita on the house. Worked perfect. Glad the existing frame had an adjustable threshold.
(https://uploads.tapatalk-cdn.com/20181027/1c2e0f41baf380fb6c1b23702576f9b8.jpg)
(https://uploads.tapatalk-cdn.com/20181028/e8a2119b97aa5d9d964967a42b813bc0.jpg)
(https://uploads.tapatalk-cdn.com/20181028/46cc721b2f0fd5d11c14a0d580461326.jpg)
Sent from my iPhone using Tapatalk
-
Purty door, but shouldn't the star be red??
Nice work, and like me, slow and steady,,,,,,,,,,,,
-
Purty door, but shouldn't the star be red??
Nice work, and like me, slow and steady,,,,,,,,,,,,
...No
-
Your right, me bad!!!!!!!!
-
Your right, me bad!!!!!!!!
:beercheers:
-
Well it’s not like I’ve been on vacation...
So I picked up my order of rough cut lumber. Also bought a dewalt miter saw stand and started cutting trim.
Stained some as well as the doors upstairs.
Also spent some time at the floor store looking at tile and carpet. Wife went today and picked out tile
Installed the LG dual zone mini split today and yesterday. Took my time and got it right. It’s running as heat pump and warming the space up quickly.
(https://uploads.tapatalk-cdn.com/20181120/84dba71114f97bb6eac1c1b4fc1ba295.jpg)
(https://uploads.tapatalk-cdn.com/20181120/29e0a81e1125bbdb05c098bfce42b0eb.jpg)
Sent from my iPhone using Tapatalk
-
(https://uploads.tapatalk-cdn.com/20181120/77aeeace6a6d83326115900dd6028fd0.jpg)
(https://uploads.tapatalk-cdn.com/20181120/01cc6ccc30a0700a225b62e3ab1ce64e.jpg)
(https://uploads.tapatalk-cdn.com/20181120/23da6692094715296dd23a942385c3d0.jpg)
Got a new clutch type anodized aluminum flare tool. Works like a champ
(https://uploads.tapatalk-cdn.com/20181120/7172839464b5777c5726a72ecc71c85d.jpg)
(https://uploads.tapatalk-cdn.com/20181120/8e225181c1712e960bfa4210bad23304.jpg)
Sent from my iPhone using Tapatalk
-
:likebutton:
-
Nice looking flare tool, I have bought and thrown away way too many of those tools. I hate working with brake lines anyway and then not being able to make a good flare connection.....WELL.. Saltwater or salt air makes brake lines turn bad even when you are extra careful.
-
New tools are always good. Why is the head unit off center?
Bob, why not go to SS?
-
To accommodate the supply and drain lines to the side of the window.
Sent from my iPhone using Tapatalk
-
So your going to do the lines through the wall then recenter?
-
Lines to the side of the window. Lower level unit lines up with it and they’ll both go down the same channel cover to the compressor
Sent from my iPhone using Tapatalk
-
I think JR wants it symmetrically pleasing to the eye. :popcorn:
-
Yeah the window and peak made it less than ideal
Sent from my iPad using Tapatalk
-
Looks and function TRN!!
-
We are great armchair quarterbacks! :popcorn:
-
We are great armchair quarterbacks! :popcorn:
No, Mike, not great ;-/
Kinda of average in an aggravating sort of way ;-)
-
:likebutton:
-
Bob, why not go to SS?
Never thought about using SS. Was just replacing brake lines on old cars with what was on them. Next time JR, some one else will for me.
-
Little update.
Went to spiral stair place and got quote. Reasonable at $1800
This is for a locally sourced one piece welded stairs with balcony railing. Painted black.
Too bad it’s a 4 week lead time. Maybe they’ll beat estimate.
Finished the trim upstairs except the parts around the stairwell. Once stairs are in I’ll finish that trim and carpet will go down.
(https://uploads.tapatalk-cdn.com/20181127/480f502fd8f4d1ff0ed65121ade5e6e0.jpg)
(https://uploads.tapatalk-cdn.com/20181127/70ebe52a1bb0265bd27aa16b4868b3a9.jpg)
(https://uploads.tapatalk-cdn.com/20181127/47173387b444186a5a6a4ef8c652a28a.jpg)
(https://uploads.tapatalk-cdn.com/20181127/178a7f32b061fdddbdacff2bddcf8b82.jpg)
Sent from my iPhone using Tapatalk
-
Nice, what flooring?
-
What is the wire hanging from the ceiling? Cat6 for Wifi AP?
-
Really like the matching window casing.
-
Nice catch Ryan, You must have a really big monitor....you always catch detail. It is cat6 for a ubiquity AP. The closet to the right is the nerve center for the entire property. 100mb connection, video matrix switcher, HDMI baluns, all the , NVR, Satellite-DVR, DVD, network server, stereo, etc. It will then be piped to the main house and the seacan. Will be installing all Ubiquity POE camera's and access points
Thanks Ken, The stain turned out darker, much darker than what it was supposed to be but can't change it now. downstairs will have an arch top with a keystone over the windows and doors.
Standby JR, pics of the floor coming. It the upstairs its a Shaw carpet frisee with memory foam pad. Downstairs will be tile with a reclaimed wood look.
-
I was looking at digital security systems this weekend. Price about doubles over the standard stuff.
-
(https://uploads.tapatalk-cdn.com/20181127/b648c1d2361007c2ccff524fe38c86c6.jpg)
Here is the floor, the glass insert for the shower and backsplash and the pebble floor of the shower
(https://uploads.tapatalk-cdn.com/20181127/d07ffeb2c021a8364213c6e209077b53.jpg)
Biscuit colored subway tile for backsplash and a larger version for the shower.
Sent from my iPhone using Tapatalk
-
JR, i used Simply Safe for the alarm. I really like it. Outside cameras won't be linked but they will text me photos of motion events and store video on the NVR
-
Nice catch Ryan, You must have a really big monitor....you always catch detail. It is cat6 for a ubiquity AP. The closet to the right is the nerve center for the entire property. 100mb connection, video matrix switcher, HDMI baluns, all the , NVR, Satellite-DVR, DVD, network server, stereo, etc. It will then be piped to the main house and the seacan. Will be installing all Ubiquity POE camera's and access points
Thanks Ken, The stain turned out darker, much darker than what it was supposed to be but can't change it now. downstairs will have an arch top with a keystone over the windows and doors.
Standby JR, pics of the floor coming. It the upstairs its a Shaw carpet frisee with memory foam pad. Downstairs will be tile with a reclaimed wood look.
Dual 24’s and a 22” flipped portrait ;) And yeah, I’m a stickler for details as you have noticed (anal/OCD whatever you’d like to call it).
I almost pulled the trigger on a Netgear Orbi system this weekend then discovered it isn’t true mesh, so I scrapped that idea and think I’ll just add a few ubiquity APs like the one I have now. Slowly working on getting my house retrofitted with cat6 runs for data and cameras to a central smart panel.
Sent from my iPhone using Tapatalk
-
Little update.
Went to spiral stair place and got quote. Reasonable at $1800
This is for a locally sourced one piece welded stairs with balcony railing. Painted black.
Too bad it’s a 4 week lead time. Maybe they’ll beat estimate.
Finished the trim upstairs except the parts around the stairwell. Once stairs are in I’ll finish that trim and carpet will go down.
(https://uploads.tapatalk-cdn.com/20181127/480f502fd8f4d1ff0ed65121ade5e6e0.jpg)
(https://uploads.tapatalk-cdn.com/20181127/70ebe52a1bb0265bd27aa16b4868b3a9.jpg)
(https://uploads.tapatalk-cdn.com/20181127/47173387b444186a5a6a4ef8c652a28a.jpg)
(https://uploads.tapatalk-cdn.com/20181127/178a7f32b061fdddbdacff2bddcf8b82.jpg)
Sent from my iPhone using Tapatalk
I know you thought of this, but make sure it fits through the door, or window
Hint: You can actually buy one larger than the door opening as long as it remains a spiral for its entire length. You simply "Screw" it through your opening.
I built a timber frame house in Tennessee and had a spiral staircase brought in after the walls, doors, and windows. It was too large, but we twisted it right through with nary an issue.
-
I really like the SS idea but have not pulled the plug yet. Had Vivint for a few years, but service was $$$. Live and learn,,,,,,,,,,,
I think a little about hacking with wireless cameras, but not sure if I should. With wired it is easy to add a camera and not pricey.
-
I really like the SS idea but have not pulled the plug yet. Had Vivint for a few years, but service was $$$. Live and learn,,,,,,,,,,,
I think a little about hacking with wireless cameras, but not sure if I should. With wired it is easy to add a camera and not pricey.
In a real life issue where someone comes to your home with ill intent what in the large scope will the difference between WiFi vs hard line, secured self contained be?
Will either stop someone?
I know I ran a bunch of stuff to hard wire cameras but my thought was to not need to change batteries. My only thought was the power source.
Sent from my iPhone using Tapatalk
-
My outside cameras are hard wired and the Simply Safe cameras are wifi but they have a metal lens cover that makes a big click when it opens so you know if someone is watching
-
I really like the SS idea but have not pulled the plug yet. Had Vivint for a few years, but service was $$$. Live and learn,,,,,,,,,,,
I think a little about hacking with wireless cameras, but not sure if I should. With wired it is easy to add a camera and not pricey.
In a real life issue where someone comes to your home with ill intent what in the large scope will the difference between WiFi vs hard line, secured self contained be?
Will either stop someone?
I know I ran a bunch of stuff to hard wire cameras but my thought was to not need to change batteries. My only thought was the power source.
Sent from my iPhone using Tapatalk
WIFI can be hacked, there is no true encripted wifi as of yet....(read the military still does not run on WIFI, but is testing.).
a lock will only keep an honest person honest?
-
Call me cautious but I won't have a Siri enabled device in my house and won't install a Ring type doorbell or consumer "Internet Accessible" camera that connects to my WiFi. Most newer routers provide for the plug and play type of port forwarding (UPnP) that you had to have some expertise to set up before and ensure encryption in active on that data stream. Typically the default is to have that on.
So when you buy a device and then just have to push a button and enter your WiFi password it uses UPnP to create an encrypted tunnel to that device (Ring Door Camera) to their Host server in the cloud.
The same approximate thing happens with any device you attach to your WiFi where you can access it remotely without using an actual VPN client like Cisco Anywhere Connect.
If you are at your site you can use this website to just check to see what ports if any you have open.
https://www.routersecurity.org/testrouter.php
-
Working on a few things this weekend
First is the line set cover. Glad I got the 6 inch. Made it easy. When it got to the first floor unit I used a hole saw to cut a hole for the first floor units lines to join in the cover cover with the 2nd floor lines. May paint it later but it on the backside that faces the forest.
Now working on trim for the first floor and around the stairs.
(https://uploads.tapatalk-cdn.com/20181201/808006ed08cb4954b9372ab8aa9c0a3f.jpg)
Sent from my iPhone using Tapatalk
-
Nothing wrong with that, pretty clean.
-
Looks so nice!
-
Alright. Back to finish work.
Paint downstairs and outlet covers. Stained a batch of trim for the windows and ends of crown mounding
About to varnish the first batch
(https://uploads.tapatalk-cdn.com/20181202/1eab7f37f30daea4b46c0121f3e45344.jpg)
(https://uploads.tapatalk-cdn.com/20181202/8243fb4eaf7552ad5777e7f6f0021000.jpg)
(https://uploads.tapatalk-cdn.com/20181202/5ef7c41ef618187c4dd514473c7175c8.jpg)
(https://uploads.tapatalk-cdn.com/20181202/bf6537d3af9e9cafa014273218faaf61.jpg)
Have the estimate from the flooring company. Likely have them do the carpet and floor tile. They are smoking crack on shower tile labor.
Sent from my iPhone using Tapatalk
-
(https://uploads.tapatalk-cdn.com/20181202/f162d399940bb90bb3715f46696d2d7e.jpg)
Next batch of trim stained and varnished.
Sent from my iPhone using Tapatalk
-
:likebutton:
Keep up the hard work Charles!
-
Laid some stone for a path
(https://uploads.tapatalk-cdn.com/20181202/32dd1c233a8348ff29429dbf81bf5726.jpg)
Sent from my iPhone using Tapatalk
-
For some reason I can’t quite find as much time to get things done as you do.
Which mini split are you using? I might have to replace the unit in my little house(~1000sqft) but not sure it would work with our heating needs up here in KY.
Sent from my iPhone using Tapatalk
-
Dave. I have a friedrich in the seacan and LG in the casita.
Depends on how insulated your place is. Between the 2 zones on the LG I have 18000 btu in 768 sq ft
I get stuff done because I only sleep 5 hours or less. Blessing and curse
Sent from my iPhone using Tapatalk
-
Was over at Duane's garage-ma-hall today. THink of it as a garage that Tex would build and you get the idea.
Duane has tow Friedrich mini splits, one up and one down. Can drive him out in the cold or freeze him out in the summer. took him a few hours to install. Way easy. So much so, I'm putting them in my "Shed" before summer.
-
Based on those recommendations and the fact that I’m in the same area/climate zone as Duane, I’m going to say that they should handle heating my place in winter. I’m going to see what exactly I need. I’m In the process of seeing if the existing LP furnace/central air is worth saving, or do I replace with mini split. It would save me the $500 for filling the LP tanks.
Sent from my iPhone using Tapatalk
-
Based on those recommendations and the fact that I’m in the same area/climate zone as Duane, I’m going to say that they should handle heating my place in winter. I’m going to see what exactly I need. I’m In the process of seeing if the existing LP furnace/central air is worth saving, or do I replace with mini split. It would save me the $500 for filling the LP tanks.
Sent from my iPhone using Tapatalk
Dave, the mini split is so much better that I wouldn't even begin to look at repairing old junk
FYI, I am looking to remove the old duct/vent system in my daughters home and installing a mini split.
Its what I used in Afghanistan and Iraq at various elevations and climates. It never failed in its mission and so easy to install/repair.
-
Now that you have mentioned it, I remember those were all over the place in Afghanistan. That would have answered my question without having to ask if I had remembered that.
Sent from my iPhone using Tapatalk
-
Now that you have mentioned it, I remember those were all over the place in Afghanistan. That would have answered my question without having to ask if I had remembered that.
Sent from my iPhone using Tapatalk
Yea, what would you estimate, a few hundred thousand of them there?
-
At least, after all, each Air Force hooch has to have a couple each. ;)
Sent from my iPhone using Tapatalk
-
At least, after all, each Air Force hooch has to have a couple each. ;)
Sent from my iPhone using Tapatalk
A-firm!
-
Well up at 04:00 and after a cup of coffee I headed to the hide to install the trim for the inside of the windows and crown end pieces that I had stained and varnished last week.
(https://uploads.tapatalk-cdn.com/20181209/8e32295065d7e94a17560a0d9a181fed.jpg)
(https://uploads.tapatalk-cdn.com/20181209/34e3f0bb5a967e155e0e5d6ea8a68ee5.jpg)
Then I measured and cut and stained the rest of the trim and crown mounding. Will varnish it next weekend. Headed baxk for bible study with the extended family tomorrow.
(https://uploads.tapatalk-cdn.com/20181209/c33a85c3869d125b7fd9bb13fa8e5dad.jpg)
Sent from my iPhone using Tapatalk
-
(https://uploads.tapatalk-cdn.com/20181215/3d2afc1aa0ae8b611577491b1c9a9206.jpg)
(https://uploads.tapatalk-cdn.com/20181215/2dd16d596f45e479570114e25208dba5.jpg)
(https://uploads.tapatalk-cdn.com/20181215/072f4e4ff14a86c58f8df1c54341f1bc.jpg)
Got the trim varnished last night. Put it up this morning
Got to unbox the new saw.
(https://uploads.tapatalk-cdn.com/20181215/ba4d6f8f2ae2cf860cb7a871ce3b4ba8.jpg)
Sent from my iPhone using Tapatalk
-
Great saw. Love mine!
And of course everything else is looking great, Tex.
Sent from my iPhone using Tapatalk
-
Nicest little "Cottage" I think I've ever seen anyone build
Commendable
Like that saw too, I have one...
-
So really the only big project are the stairs now?
Heck, who needs a main house!
-
Nicest little "Cottage" I think I've ever seen anyone build
Commendable
Like that saw too, I have one...
Your going to need to step up your quality on the farm side projects bud.
Sent from my iPhone using Tapatalk
-
Thanks guys. I have the 12 inch standard compound miter saw that is 23 years old now (Man, I'm getting old, bought that saw in '95 to remodel my first house) Wife and girls got me the sliding compound for my birthday.
Stairs are on order. Should be ready either next week or week after, I think. They are one piece welded so should be a matter of threading them through the door and standing them up and bolting it down. Carpet should be in before the stairs go up which will complete the upper floor.
That leaves tile floor, tile in the shower, cabinets, countertops, toilet, shower glass enclosure, them base molding and trim on the doors.
Then I'll have to run the LP line to the tankless water heater
-
Those should be nice and less work!
I need to address my moms house (mine now) Not sure if I want to upgrade and sell or just sell. (Its clean but a little dated)
-
Nicest little "Cottage" I think I've ever seen anyone build
Commendable
Like that saw too, I have one...
Your going to need to step up your quality on the farm side projects bud.
Sent from my iPhone using Tapatalk
I'm a hillbilly
You studs have me beat
But I can dig a hole and stack a stone or two ;-))
-
Those should be nice and less work!
I need to address my moms house (mine now) Not sure if I want to upgrade and sell or just sell. (Its clean but a little dated)
Possible rental/airbnb?
-
Thanks guys. I have the 12 inch standard compound miter saw that is 23 years old now (Man, I'm getting old, bought that saw in '95 to remodel my first house) Wife and girls got me the sliding compound for my birthday.
Stairs are on order. Should be ready either next week or week after, I think. They are one piece welded so should be a matter of threading them through the door and standing them up and bolting it down. Carpet should be in before the stairs go up which will complete the upper floor.
That leaves tile floor, tile in the shower, cabinets, countertops, toilet, shower glass enclosure, them base molding and trim on the doors.
Then I'll have to run the LP line to the tankless water heater
Didn’t you say you’ve had 12 houses? That’s like moving every couple of years on average....
-
Ordered the carpet last night. It MAY make it on the truck for Tuesday the 18th. If it doesn’t it won’t get here until 1/8/2019 because two holidays on each of the next two week’s Tuesdays. And they only get shipments on Tuesdays . Bummer.
Hoping the stairs will be done next week.
Sent from my iPhone using Tapatalk
-
LOL yeah Shawn at one time I was moving about every 2-2 1/2 years, plus a lake house and now this second house. I never stayed in a house long enough for it to need a refresh, but now that I'm in my current house going on 10 years, the crap is multiplying exponentially. Good news is that it has appreciated 30%
-
So cleaned out all the overspray mud from the Sheetrock guys to get ready for tile in the shower.
(https://uploads.tapatalk-cdn.com/20181216/623ea500128415986770f03a0810ef06.jpg)
Then stained the doors and then varnished one side.
(https://uploads.tapatalk-cdn.com/20181216/e89f44d377ce84777da6aca72b5cec31.jpg)
Now I’m sipping 130 proof whiskey and watching Star Wars phantom menace.
Sent from my iPhone using Tapatalk
-
Lol, our average was 7 years roughly (building 4th home now) although it’s been 3.5 in this current home which is about what I expected when we moved in as we bought small in case we needed to flip it if things didn’t work out.
30% is pretty good, ours sold for about 7% more than we paid 3.5 years ago. But things are softening up a bit here on the front range...
-
130 proof ? Of what!
Sent from my iPhone using Tapatalk
-
Love real wood features. Know it's not the in thing, but neither am I.
-
https://www.qualityliquorstore.com/jack-daniels-single-barrel-barrel-proof/
Here ya go, Dave.
-
That’s looks great, Utah’s has some goofy liquor laws. Like it only can be sold in government run liquor stores, higher taxes on purchases and stuff. I think the supply is limited also
Sent from my iPhone using Tapatalk
-
Well, it is run by the Mormons, so there is that.
Sent from my iPad using Tapatalk
-
Well, it is run by the Mormons, so there is that.
Sent from my iPad using Tapatalk
:popcorn:
-
JR, if we wait long enough everything comes back in style. Now where’s that bag of skinny ties I had......
Sent from my iPhone using Tapatalk
-
Well, it is run by the Mormons, so there is that.
Sent from my iPad using Tapatalk
:popcorn:
Just an observation. If it were the Catholics they’d have one on every corner and none of it were the Baptists.
Sent from my iPhone using Tapatalk
-
Here in Wa we were state run liquor stores too. Now most grocery stores have product for sale. The Dems voted it in, they can't face reality while sober.
-
Well, it is run by the Mormons, so there is that.
Sent from my iPad using Tapatalk
:popcorn:
Just an observation. If it were the Catholics they’d have one on every corner and none of it were the Baptists.
Sent from my iPhone using Tapatalk
Know how to keep your Baptist fishing buddy from drinking all your beer? Bring along one of his Baptist buddies!
-
Lol that’s shz is funny right there
Sent from my iPhone using Tapatalk
-
Redneck table saw for working full sheets.
(https://uploads.tapatalk-cdn.com/20181223/3c10330ed598535c4b9291cf880cd361.jpg)
Sent from my iPhone using Tapatalk
-
Really not that redneckish, other than its on a trailer.....
It’s how we setup our big table saws in the cabinet shop. Just built a larger table around the saw body so not uncommon.
-
Yeah I noticed the rails of the trailer were not too far off the height of the saw. Built a jig that I can reuse that. The saw sits on and the MDF top lays on and rests on the sides of the trailer.
Sent from my iPhone using Tapatalk
-
Got to work on the vanity in the bathroom
(https://uploads.tapatalk-cdn.com/20181224/bafe776753dca9cf3ac4ac5c1949c442.jpg)
(https://uploads.tapatalk-cdn.com/20181224/2e871c82e4cb62907c9d59bf7d93872e.jpg)
Sent from my iPhone using Tapatalk
-
Are you building it from scratch, or did you buy it and just broke it down for staining/install?
-
Building it from scratch. The vanity is a bit of a test run for the kitchen cabinets. I need to get some pipe clamps so I can clamp the cabinets. I use biscuits and glue and prefer not to use many nails.
Sent from my iPhone using Tapatalk
-
Headed to MIL in the morning. Pray for me that I hold my tongue as there is much drama in that household. Between the always complaining MIL and the ungrateful and unhelpful SIL that is still living at home at 45 years old.
Sent from my iPhone using Tapatalk
-
Cabinet looks great!
Good luck tomorrow, Charles!
Sent from my iPhone using Tapatalk
-
Nice job on the cabinet :likebutton:
-
Good work and good luck!
-
A follow-up to my good luck wishes earlier... ;)
(https://uploads.tapatalk-cdn.com/20181225/b3b63f9c8a153c80882e05e39072cfd7.jpg)
Sent from my iPhone using Tapatalk
-
Headed to MIL in the morning. Pray for me that I hold my tongue as there is much drama in that household. Between the always complaining MIL and the ungrateful and unhelpful SIL that is still living at home at 45 years old.
Sent from my iPhone using Tapatalk
Patience for you in your DAY of need TRN! I had a SIL living with us for several weeks/months on and off a few years ago...... I know your pain!
-
I survived the trip. So much disfunction in that house and a weak but compassionate father figure.
Today I ripped plywood and made the box parts for the kitchen cabinets.
Since I’m in a bit of a rush (impatient) I bought a Kreg joiner. I like biscuits and glue and will use the Kreg to hold everything so I can keep building without having to clamp and wait overnight. I’ll build the boxes and get them in place and then use the rough sawn lumber to build the faces and then lastly build the drawers and doors.
Carpet gets installed Monday and rain is on the way so with all the box pieces cut I can get to making the boxes indoors out of the elements tomorrow.
Now I’m about to make flank steak fajitas
Sent from my iPhone using Tapatalk
-
So put the boxes together this morning and will stain them this afternoon. One they are stained and varnished on the inside I’ll level and attach the boxes to the wall and then start to build the face frames
I really like that Kreg jig. I’m still using biscuits and glue but the pocket screws let me complete without having to clamp and wait overnight.
(https://uploads.tapatalk-cdn.com/20181230/dc84304a6a7abb71b81c42130bc4620a.jpg)
(https://uploads.tapatalk-cdn.com/20181230/1c8a1163b90f5be55659280731d541ab.jpg)
(https://uploads.tapatalk-cdn.com/20181230/5c189945053b4df649971613690bd361.jpg)
Sent from my iPad using Tapatalk
-
As we all know, I just got intro'd to the kreg gig. I love it. Plan to get a couple other models for mo-better cabinet joinin'
-
They are a nice little unit, been eyeing for years.
So TRN, carpet in the guest house?
-
Carpet upstairs. Tile down. Gotta wait on the stairs to get finished and installed before I can install tile.
Carpet has to go in before stairs. Once stairs are up it will be next to impossible to get a roll of carpet upstairs.
Then stairs in and then tile.
Sent from my iPhone using Tapatalk
-
Carpet installed. Much nicer and quieter upstairs.
Unfortunately they dinged my wall and will have to come back and repair.
(https://uploads.tapatalk-cdn.com/20181231/559d7ae357dc47039e98b30847899e74.jpg)
(https://uploads.tapatalk-cdn.com/20181231/a088d08ae6192c89b8e6e1b8086fd8a9.jpg)
Now back to cabinet making
Sent from my iPhone using Tapatalk
-
If you want something done right... ;)
Sent from my iPhone using Tapatalk
-
You sure have a bunch of space between those kregg holes, hope it don't come apart!!
:)
-
You sure have a bunch of space between those kregg holes, hope it don't come apart!!
:)
:popcorn:
-
Ha!
-
Boxes are in. Floor is pretty level high spot was about 1/8 inch. Kreg screwed the sink cabinet to the subfloor to give a rock solid base for the sink and for the other cabinets to reference.
Gotta start working on the face frame with the rough sawn lumber.
Interesting that this plywood had some kind of up coating or something that was spattered and didn’t take stain evenly. Not a big deal since it’s all inside the cabinet but something to keep an eye on in the future should I use that type again. These things are solid as a rock.
(https://uploads.tapatalk-cdn.com/20190101/3f9b10e724c5e6116a3918ecb9e708f3.jpg)
(https://uploads.tapatalk-cdn.com/20190101/ae9957d9e64e989404db84e04ce711de.jpg)
Oh and kept up the family southern tradition. Black eyed peas
(https://uploads.tapatalk-cdn.com/20190101/64929fc6f18a9dd46574edcde5e3ab39.jpg)
Sent from my iPhone using Tapatalk
-
You sure have a bunch of space between those kregg holes, hope it don't come apart!!
:)
Lol. Where did that evil emoji go?
Sent from my iPad using Tapatalk
-
Oh and since I installed the cabinets before the floor, I adjusted the cabinet height by 1/2 to account for the difference. Not that it matters since there won’t be any appliances, like a range, to worry about height issues.
Sent from my iPad using Tapatalk
-
So today the plan was to move all the AV and security cameras and internet to the structured wiring closet in the casita. Recall that I ran 6 CAT6 cables between the main house and the casita and then 3 more CAT6 between the seacan and the casita.
I have one directv receiver and one dvd player that also streams. I have a 4x4 switching matrix that can send any of 4 signals to any of 4 tvs,which will work out fine once I add the 3rd tv, which will be in the casita. Depending on how bad the teen years are, I may add a 4th in the seacan.
The 100Mb connection comes into the main house and then is sent to the casita and distributed to the computer, av equipment, a wireless access point for the outdoors and guest house and outside cameras as well as to the seacan for wifi access point and camera. I also have a rack mounted computer that will serve as the security video recorder and network storage device. The baluns inside the main house also send IR/remote signals to change settings and channels to the video equipment
in the main house it also is connected to security cameras around the exterior of the house.
I still have a lot of configuring and aiming of the cameras to be done but the bones are done.
(https://uploads.tapatalk-cdn.com/20190113/168432a75ed7d4fe1eef9662a5dca631.jpg)
(https://uploads.tapatalk-cdn.com/20190113/84f35492c18d8a95b8da8a39a6b16b21.jpg)
Sent from my iPhone using Tapatalk
-
May come to moving the reloading stuff to the casita and locking the girls in the seacan. Just kidding of course but the thought might pop up.
-
May come to moving the reloading stuff to the casita and locking the girls in the seacan. Just kidding of course but the thought might pop up.
I raised three girls...Seacan is a viable option for a week every month...
-
Doing this all yourself TRN?
-
So today the plan was to move all the AV and security cameras and internet to the structured wiring closet in the casita. Recall that I ran 6 CAT6 cables between the main house and the casita and then 3 more CAT6 between the seacan and the casita.
I have one directv receiver and one dvd player that also streams. I have a 4x4 switching matrix that can send any of 4 signals to any of 4 tvs,which will work out fine once I add the 3rd tv, which will be in the casita. Depending on how bad the teen years are, I may add a 4th in the seacan.
The 100Mb connection comes into the main house and then is sent to the casita and distributed to the computer, av equipment, a wireless access point for the outdoors and guest house and outside cameras as well as to the seacan for wifi access point and camera. I also have a rack mounted computer that will serve as the security video recorder and network storage device. The baluns inside the main house also send IR/remote signals to change settings and channels to the video equipment
in the main house it also is connected to security cameras around the exterior of the house.
I still have a lot of configuring and aiming of the cameras to be done but the bones are done.
(https://uploads.tapatalk-cdn.com/20190113/168432a75ed7d4fe1eef9662a5dca631.jpg)
(https://uploads.tapatalk-cdn.com/20190113/84f35492c18d8a95b8da8a39a6b16b21.jpg)
Sent from my iPhone using Tapatalk
Looks good TRN. Where is your UPS?
Sent from my iPad using Tapatalk
-
Yeah pretty much. I have some friends that are experts. If I get stuck I call them. Installed a few more cameras today. Here’s the one in the seacan. Also got most of my bookcase built
It’s where my reloading books and scales etc will go
Just need to face frame it.
(https://uploads.tapatalk-cdn.com/20190113/77a549f65e5012c79c36d71f4ccafa9f.jpg)
(https://uploads.tapatalk-cdn.com/20190113/c5f2a3d34f3c1b74fc8213009b69d095.jpg)
Sent from my iPhone using Tapatalk
-
Now all the Cat6 is powered via the wire right?
Contemplating my hide stuff when not around.
-
Mike, no UPS. I have whole home surge protection and am working on auto switching back up generator set.
JR, camera's and access points are POE (power over ethernet) meaning they only require a single CAT6 connection with a 24v power injector, or a ethernet switch with POE capability like this one.
Ubiquity makes all the components and they all work together and can be configured and monitored remotely. Highly recommend them.
-
(https://uploads.tapatalk-cdn.com/20190114/efa2f4fb7e3653256cf021b032d3422d.jpg)
Sent from my iPhone using Tapatalk
-
I'm thinking that and wireless for a few prime spots with solar power. Since I won't be there some of the time I want to see what/who comes and goes in realtime and game cameras.
Might not even have any power at first, so gen and solar will be options.
Don, do you have a few cameras setup just for fun? Specially with all those machines just sitting there.
-
Mike, no UPS. I have whole home surge protection and am working on auto switching back up generator set.
JR, camera's and access points are POE (power over ethernet) meaning they only require a single CAT6 connection with a 24v power injector, or a ethernet switch with POE capability like this one.
Ubiquity makes all the components and they all work together and can be configured and monitored remotely. Highly recommend them.
Thank it sweet. As long as your equipment is tolerant of being dropped and then booting back up when the backup fires up you are good.
Sent from my iPad using Tapatalk
-
Never thought I'd say this, but, nice rack Charles.
-
Never thought I'd say this, but, nice rack Charles.
I told him that very same thing a year or so ago..... :knucklehead:
-
But he had to buy them,,,,,,,,,,,,,,
-
Best kind
Sent from my iPhone using Tapatalk
-
:laugh:
-
Mike, no UPS. I have whole home surge protection and am working on auto switching back up generator set.
JR, camera's and access points are POE (power over ethernet) meaning they only require a single CAT6 connection with a 24v power injector, or a ethernet switch with POE capability like this one.
Ubiquity makes all the components and they all work together and can be configured and monitored remotely. Highly recommend them.
Thank it sweet. As long as your equipment is tolerant of being dropped and then booting back up when the backup fires up you are good.
Sent from my iPad using Tapatalk
Now I’m looking at UPSs. Maybe just enough to keep it live during the xover. Power drops out all the time up there but since I have more invested now it makes more sense.
Sent from my iPhone using Tapatalk
-
Mike, no UPS. I have whole home surge protection and am working on auto switching back up generator set.
JR, camera's and access points are POE (power over ethernet) meaning they only require a single CAT6 connection with a 24v power injector, or a ethernet switch with POE capability like this one.
Ubiquity makes all the components and they all work together and can be configured and monitored remotely. Highly recommend them.
Thank it sweet. As long as your equipment is tolerant of being dropped and then booting back up when the backup fires up you are good.
Sent from my iPad using Tapatalk
Now I’m looking at UPSs. Maybe just enough to keep it live during the xover. Power drops out all the time up there but since I have more invested now it makes more sense.
Sent from my iPhone using Tapatalk
It doesn’t look like your equipment would draw a lot. Something like this should work.
https://www.newegg.com/Product/Product.aspx?Item=42-111-344
Good insurance.
Sent from my iPad using Tapatalk
-
Perfect. Saw that one on Amazon.
-
OK so installed software and booted up cameras and access points. It’s an enterprise set up so it was a bit more intensive to get it going but the management of it is so easy.
I have 3 WiFi access points that are controlled from a web GUI and I can clone settings and update all the software from the web page and a click of the mouse.
Cameras are a little more complicated but essentially the same. Can program for motion video recording and adjust sensitivity and area of the camera view that triggers motion.
Also have an app on the phone and iPad that gets motion alerts, can view all the cameras and view recorded events.
(https://uploads.tapatalk-cdn.com/20190121/0c1529738660213d92c6b6316d96027f.jpg)
Sent from my iPad using Tapatalk
-
Those are some really clear camera images!!
Sent from my iPhone using Tapatalk
-
And the garage is till cleaner than mine.
-
Yeah, the shop is a bit of a mess since I've been working on the casita.
-
Top notch setup! If the whole insurance thing doesn't work out you always have a job in the tech field! :beercheers:
No rush but if you have a chance could you post up a component list unless that is classified. :)
I'm always looking for a nice camera setup.
-
Ok here you go.
https://www.ui.com/unifi/unifi-ap/
I’m using the UniFi AC Lite. They are POE and come with their own POE injector. They will mesh with each other and you can clone settings with a click of a button.
If you need a mesh network and you can’t get a CAT 6 cable to each point they have a repeating mesh network set up too.
I was able to put cable to each one with no problem but if you are in a big warehouse you can use a mesh/repeater set up.
So get the first one plugged in and powered up and then you download a UniFi software app to your computer and then access it on the network and set your SSID, password, etc. Then everyone you add after that will show in the software utility and you just click “adopt” and then you can go in and select the first one to clone settings to.
For the security cameras I use the G3 Dome and the G3 bullets. They make a all in one NVR that has all the software and hard drive on it and its about $300. Or you can download the NVR software to a network computer and run it from there (I did this for the hide, the house in Houston I have the all in one NVR). You can also download an app to your android or apple device and monitor your cams and get motion alerts. The software will also email you alerts if it detects motion and it will auto record if you set it up that way.
More to come
Sent from my iPad using Tapatalk
-
I’m also using the ubiquity POE switches to power everything.
I also have the dongle that you plug into the network and then you can manage, upgrade and modify your settings from anywhere.
As soon as I upgrade the OS on the rack computer I built I will run Remote Desktop and be able to access files and manage the whole system from anywhere.
Sent from my iPad using Tapatalk
-
I’m also using the ubiquity POE switches to power everything.
I also have the dongle that you plug into the network and then you can manage, upgrade and modify your settings from anywhere.
As soon as I upgrade the OS on the rack computer I built I will run Remote Desktop and be able to access files and manage the whole system from anywhere.
Sent from my iPad using Tapatalk
TRN.
I honestly never heard of Ubiquity hardware and I have been doing this a long time. Sounds like you have a great experience with. I will definitely check it out.
Thanks
Sent from my iPad using Tapatalk
-
Interesting Charles, quick question do you find yourself logging in and looking at the live feeds often?
We had cameras setup at my old facilities (mainly to make sure automated machines were running 24-7). After leaving there I’m glad I don’t have cameras.
My new shop has them (whole facility does in fact) but I won’t download the app. John who owns the development obsesses over those cameras too....
New house is setup with amazon and ring on the front door which as you know can be expanded (not sure I like any of it, we’ll see)
-
Think about all this fancy stuff and who can watch whats going on besides us? I really like the idea, but don't trust cloud stuff.
-
Got the shower sealed yesterday and ordered all the tile for the floor, shower and backsplash.
Supposedly the stairs will be done this Friday and I hope to get them installed this coming weekend.
Tile will be here on or about 1/30. It’ll really start looking close to finished when the floor goes down.
(https://uploads.tapatalk-cdn.com/20190122/4c721a5bc9ad7714d3d8d55e3ba401bf.jpg)
Sent from my iPhone using Tapatalk
-
Been to Dachau?
Eekes!!!!
Looks like a gas chamber
But, yes, I know this is only inprocess and will arrive at something north of spectacular
Ya know, thinking about it, Tex, you have screwed yourself! :facepalm:
Ya, really
Unlike me, you never screw anything up. Your work is always top notch, better than imagined, over the top and surprising. :angel:
Mine is, well, I work on stuff
So we all have expectations of you completing something fit for the pages of "Southern Living" magazine. :likebutton:
I pray for you to be comforted in the day when you finally (if ever) screw somethin' up. :rolleyes:
Oh what a sad that day will be :cry: :cry: :cry:
Good work!
-
Interesting Charles, quick question do you find yourself logging in and looking at the live feeds often?
We had cameras setup at my old facilities (mainly to make sure automated machines were running 24-7). After leaving there I’m glad I don’t have cameras.
My new shop has them (whole facility does in fact) but I won’t download the app. John who owns the development obsesses over those cameras too....
New house is setup with amazon and ring on the front door which as you know can be expanded (not sure I like any of it, we’ll see)
I think I have mentioned that I am not a fan of Siri, Ring, or any of the new device that listens to you 24X7X365... but here is a very good article to back that up...
You can put in any fake gmail address to read it.
https://www.theinformation.com/articles/at-rings-r-d-team-security-gaps-and-rookie-engineers?jwt=eyJhbGciOiJIUzI1NiJ9.eyJzdWIiOiJtdGNsZWF2ZXJAZ21haWwuY29tIiwiZXhwIjoxNTc5NzI0OTM2LCJuIjoiR3Vlc3QiLCJzY29wZSI6WyJzaGFyZSJdfQ.oROwA84pw7ujN0uYvliy5BS_M9izLkcBg986lSNOrqQ&unlock=ed6570bc58b449cf
Do you really want this person listening in on your house?
-
Copy, one other question? Where did you get that picture of Ken? :popcorn:
-
Copy, one other question? Where did you get that picture of Ken? :popcorn:
Well... it is a long story... and I happened to be in AZ actually looking for a H rally when here comes Ken directing traffic and then discovers Trump WON! OMG the humanity of it all... I gave him a hanky and left. :popcorn:
Wait... did Ken just hear me type that via my iPhone microphone...
-
Been to Dachau?
Eekes!!!!
Looks like a gas chamber
But, yes, I know this is only inprocess and will arrive at something north of spectacular
Ya know, thinking about it, Tex, you have screwed yourself! :facepalm:
Ya, really
Unlike me, you never screw anything up. Your work is always top notch, better than imagined, over the top and surprising. :angel:
Mine is, well, I work on stuff
So we all have expectations of you completing something fit for the pages of "Southern Living" magazine. :likebutton:
I pray for you to be comforted in the day when you finally (if ever) screw somethin' up. :rolleyes:
Oh what a sad that day will be :cry: :cry: :cry:
Good work!
No necessarily so, Don. I just don't post the mistakes....except maybe that pond thing with mowers....
There is no doubt that if i were the subject of interest by some agency they could likely hack my camera system. One reason only exterior cameras. I don't want the chinese seeing me walking around naked in my house.....
I don't find myself checking cameras all that often. Because they have motion detection, i get alerts if they detect motion and the sensitivity and area of detection can be adjusted.
Don, that shower is coated in a rubberized coating by KBRS, who also made the one piece composite showe pan. Guaranteed leak proof. There is fabric mesh seam tape that goes on all the seams and then you roll on the sealer and put about 3 coats on it and its essentially a monolithic rubberized box. Even if water penetrates the grout or mortar, there is zero chance water reaches the stud cavity. Once its dry you just tile right over it. I spent a lot of money on the shower system because I've seem my fair share of poorly constructed showers and the damage they can do. The 3x4 composite shower base kit alone was $600 but it will last longer than I will.
-
I picked up the Ubiquiti AC Pro just before Christmas after seeing what you were using. I had never heard of them before but after doing my research and looking at them, decided to give it a shot. So far I’m really happy with it. The range is better than my old three node meshed consumer grade network was. Setup was easy enough and POwer over Ethernet is definitely nice, as long as you can get cat6 to it you’re golden. It has given me better coverage in the whole house(~4700 sq ft) than I had before and the throughout I’m getting is much better. I’ll be picking up a couple more, probably the AC lite to extend the mesh into my garage and the back yard.
Are your cameras from ubiquiti as well?
Sent from my iPhone using Tapatalk
-
Yes. Camera, WiFi and switches.
Sent from my iPhone using Tapatalk
-
Copy, one other question? Where did you get that picture of Ken? :popcorn:
Ya know...
I'm thinkin' of throwin' the yellow flag on this one
Guys
What about it
Is that overly cruel or am I wrong
Spank him or let him run for a bit longer?? What do the menses say?
-
No necessarily so, Don. I just don't post the mistakes....except maybe that pond thing with mowers....
Ah yes, I forgot about that noteworthy event
There is no doubt that if i were the subject of interest by some agency they could likely hack my camera system. One reason only exterior cameras. I don't want the chinese seeing me walking around naked in my house.....
Nor would we!
I don't find myself checking cameras all that often. Because they have motion detection, i get alerts if they detect motion and the sensitivity and area of detection can be adjusted.
Don, that shower is coated in a rubberized coating by KBRS, who also made the one piece composite showe pan. Guaranteed leak proof. There is fabric mesh seam tape that goes on all the seams and then you roll on the sealer and put about 3 coats on it and its essentially a monolithic rubberized box. Even if water penetrates the grout or mortar, there is zero chance water reaches the stud cavity. Once its dry you just tile right over it. I spent a lot of money on the shower system because I've seem my fair share of poorly constructed showers and the damage they can do. The 3x4 composite shower base kit alone was $600 but it will last longer than I will.
^^^^^ See! See what I'm talking about^^^^ You and Duane cosmic brothers or something? ;-))
[/quote]
-
I think we all subscribe to the “buy once, cry once” mentality in one way or another. Be it trucks (and the parts for them), tools, or quality building materials. Spending a bit more will often save you some hassle later.
Sent from my iPhone using Tapatalk
-
Well finally got this today. Will go in this weekend and then it’s on to tile (https://uploads.tapatalk-cdn.com/20190125/92d6e189c0106d69fbd3a30f7f472ac6.jpg)
Sent from my iPhone using Tapatalk
-
It looks a little twisted guy.
Sent from my iPhone using Tapatalk
-
Can't wait to see it up!!
-
I’m still wondering how I’m going to spiral it through the 3’0 door opening. We shall see
Sent from my iPad using Tapatalk
-
I’m still wondering how I’m going to spiral it through the 3’0 door opening. We shall see
Sent from my iPad using Tapatalk
Running start and constant momentum usually helps. I mean the careful and skillful application of twisting and retwisting.
-
Bobby I thought you would say drop it in from a high altitude! Will keep you posted.
May require a cutting torch and a BFH
Sent from my iPad using Tapatalk
-
How much you think that screw weighs?
-
#300ish. Got two buddies coming to help. Just stopped and bought 3 ribeyes. Gonna feed em good.
Sent from my iPhone using Tapatalk
-
Screw it through the door!
-
We wanna see video. Maybe re-aim one of those fancy surveillance cameras toward the action?
Sent from my iPhone using Tapatalk
-
Bobby I thought you would say drop it in from a high altitude!
Well that fancy chunk of steel falling from high altitude and reaching terminal velocity would easily get into the casita via the roof, however you'll have to fix the roof and order a new stairway lol.
-
A lot of mental drama for nothing.
(https://uploads.tapatalk-cdn.com/20190126/6929e0a0a2d60b6562e44b4cc1cd0ac1.jpg)
(https://uploads.tapatalk-cdn.com/20190126/b8982ed6a5e3de1c86afe167e171dfd5.jpg)
(https://uploads.tapatalk-cdn.com/20190126/05e51bb81b74fbc25ff1b49c0c9936f5.jpg)
Sent from my iPhone using Tapatalk
-
Turned out nice Charles.
-
Sweet, guess it fit through the door.
-
Thanks.. it wast bad at all. Got it plumbed and then drilled the holes for the landing to bolt to the second floor.
The railing is a little longer than my wood blocking on the floor. I’ll have to replace that one pice with a longer piece and then bolt it down. Not a big deal at all. Really sturdy and decent sized.
Made ribeyes for my boys that came and helped and then we shot a bit of steel and then made a fire and drank whiskey. All in all a good day
Sent from my iPad using Tapatalk
-
Looks really good. Glad it went in smooth.
Sent from my iPad using Tapatalk
-
Beautiful.
-
That does look pretty awesome
What are you going to put on the treads? I ask because I would fall down them slick looking steps
Sent from my iPhone using Tapatalk
-
I had that conversation with the stair guy and he said no diamond plate because it actually makes less traction because your only gripping the raised area with much less surface area. If grip becomes a problem I’ll put grip tape strips on it. I haven’t tried it in socks but with shoes it’s no problem
Sent from my iPad using Tapatalk
-
The local HD sells a sticky tape stuff for stairs. I am prone to slipping on all types of stairs, breaking hand rails, usually in a bath towel only. So on. Size 13 feet don’t fit stair real well.
Shoes would make a large difference for sure
Next is tile?
Sent from my iPhone using Tapatalk
-
Yes. Ordering the toilet today from Lowe’s. Tile is supposed to be here 1/30. I’m paying the labor on the floor but doing the shower and backsplash myself.
Sent from my iPad using Tapatalk
-
Tex, I actually think I had that exact spiral staircase in my Tennessee house. I don't remember ever slipping or falling on it. Open floor plan and had a mezzanine loft above the kitchen that, that staircase serviced. I don't thing it had any friction surface at all. I'd bet you will be OK with that as is
-
Nice, staircase looks good, glad you didn’t have any problems getting it in.
Sent from my iPhone using Tapatalk
-
Ok. Tile guy is three weeks out so I’m working on shower and cabinets.
Installed shower seat with thin set
(https://uploads.tapatalk-cdn.com/20190203/93e7837928fbdc2b0d6f14d50581627c.jpg)
Got the face frames done on the cabinets. Now on to doors and drawers.
(https://uploads.tapatalk-cdn.com/20190203/ab568f5c531764f7f132557a9d8571e4.jpg)
Sent from my iPhone using Tapatalk
-
On the staircase, is there a brace under the lower step after the floor?
-
Negative. Not necessary. Stout.
Sent from my iPhone using Tapatalk
-
Took a few minutes for some impromptu practice. Got a ways to go to get back the skills I’ve let atrophy. 5x8 miniature IPSC at 12-15 yards.
https://youtu.be/OMm3o43d3L4
G17 now officially has 18,500 rounds down it. 19k when I finish this can
Sent from my iPad using Tapatalk
-
Tile guy is supposed to be coming Thursday for the floor. Started on the shower today. OMG.
It’s going to be harder than I thought.
(https://uploads.tapatalk-cdn.com/20190224/8f82935afefd4e151cd187010c9c8438.jpg)
Getting the first course level is the biggest pain.
At least my tile saw still works.
Sent from my iPhone using Tapatalk
-
^^^^^^^^^^^What am I looking at here, Tex? ^^^^^^^^^^^^^^^^^^^^
-
That there is where you set your whisky so you can use both hands to wash your ba.... back yeah wash your back
Sent from my iPhone using Tapatalk
-
Lol Dave. Don that the glass accent tile in the shower niche , where the daughters will not have enough room to put the 6 bottles of hair products
Sent from my iPhone using Tapatalk
-
:facepalm:
So maybe Dave is right then. Lol.
-
Here’s where I left it today. Knee is killing me and I’m moving slow.
(https://uploads.tapatalk-cdn.com/20190224/b68901f48f61c0cea3df5ae019240321.jpg)
Sent from my iPhone using Tapatalk
-
Lol Dave. Don that the glass accent tile in the shower niche , where the daughters will not have enough room to put the 6 bottles of hair products
Sent from my iPhone using Tapatalk
You're a cruel man! But that's funny...
-
Getting a tumbler holder cut out for my shower. Not much better than a crown n coke in the hot shower.
Sent from my iPhone using Tapatalk
-
I would be happy with a shelf (I have), a hole would collect it and warm it up. Mount a stick on up high, maybe neck level with a straw.
-
Well. Tile guys didn’t get started Friday. Now that torqued up my schedule. Gotta catch a plane Monday and they won’t be done until Tuesday. My dad is gonna come let them in Tuesday.
They did come and fix the Sheetrock they messed up installing the carpet
(https://uploads.tapatalk-cdn.com/20190302/abc2f0ff95b04e31d2c64f7e24e6b274.jpg)
(https://uploads.tapatalk-cdn.com/20190302/948595b7ff87bbb6810ef235d83d7562.jpg)
And dropped off the tile and ditra underlayment
I picked out granite and the granite guys came to measure
(https://uploads.tapatalk-cdn.com/20190302/9d7e4e3df97406edc184d5b3de88b933.jpg)
Today I made the drawers
(https://uploads.tapatalk-cdn.com/20190302/d479fb403fd0ea4832902d337b4efa89.jpg)
And re configured the sink base cabinet since the wife nixed the apron sink due to cost. Now going under mount stainless.
(https://uploads.tapatalk-cdn.com/20190302/0a866a707c8aa3fca6dee979096c7b84.jpg)
Sent from my iPhone using Tapatalk
-
That drawer box is good looking. Nice and tight corners
Sent from my iPhone using Tapatalk
-
Thanks Dave. I cheated. The cabinet supply place I went to, had baltic birch sheets 5x5 with both sides poly urethaned. And then I noticed that they had pre made drawer pieces out of that with the dado groove for the bottom panel already it it and the birch tape already bound to one edge. They also had 1/4 inch birch with poly on one side.
All I had to do was measure, cut glue and nail and then slide the bottom panel in.....
-
We use Burch in most of our drawers. I spray instead of getting the prefinished, That way my cut edges get sealer
Sent from my iPhone using Tapatalk
-
That sounds pretty handy. Plan your cuts accordingly so you cover your exposed cuts and nobody would be the wiser.
-
Yeah. Once the drawer fronts go on the only way you see a cut is to pull the drawers out and look at the back. These pre made sides are great for small projects and they come in three heights. 4,7,9 inches.
Sent from my iPhone using Tapatalk
-
Ok. Tile guys started yesterday. I was there to get them started and then left to go to the airport. Dad came over in the afternoon and stayed the night to let them in today. They finished today and dad sent some pics. Can’t wait to see it in person
(https://uploads.tapatalk-cdn.com/20190305/550897f37cd34ae7bfdb7a91e2ef8d04.jpg)
(https://uploads.tapatalk-cdn.com/20190305/2e2f166d5866c71502175e5b3a9f686c.jpg)
(https://uploads.tapatalk-cdn.com/20190305/26ca47cd5d7bee7a2f06cc876588a500.jpg)
Sent from my iPhone using Tapatalk
-
Now it’s time to install baseboards and the door molding
Then finish the doors and drawers for the cabinets
Then finish the shower tile and wait for the countertop guys to get the countertop installed.
Sent from my iPhone using Tapatalk
-
I built some drawer boxes yesterday (https://uploads.tapatalk-cdn.com/20190305/eceb97ec783d2058d9402785793e3a94.jpg)
That tile looks really good.
Sent from my iPhone using Tapatalk
-
Looks great Charles.
-
Charles, looks like them knuckleheads spilled three types of paint on your floor and forgot to clean it up! You ain’t paying them in bourbon are you? :facepalm: :tongue:
-
Man, that floor is all ganked up! Who painted that? Paint all kraked up...Looks like they just used old pieces of wood and left over stuff ;-))
-
I would had I been able to overcome the language barrier
Sent from my iPhone using Tapatalk
-
Probably doesn't help that Dad is still using a polaroid from the 50's. lol
-
Funny Ken. I was wondering why the pictures were that way. Then I realized he was taking pictures through the windows since he couldn’t walk on the floor
Sent from my iPhone using Tapatalk
-
Makes sense!
Well at least he thought it through.
-
Funny Ken. I was wondering why the pictures were that way. Then I realized he was taking pictures through the windows since he couldn’t walk on the floor
Sent from my iPhone using Tapatalk
Couldn’t he open the front door? Lol
Sent from my iPhone using Tapatalk
-
I’m confused by the floor. But it sure looks good! They did a nice job around the stair mount! Needs to be in an old log cabin style house.
What’s the tile called? Old paint splatter mismatched stain??
On a serious note, it looks good. I’ve never seen a tile like that in a store. But have only looked for one job, and he bought travertine.
-
Ryan the 3rd pic in post 1518 was through the front door. It’s the clearer of the 3 :wink
I’ll run down the name of the tile. It was a Shaw floor tile IIRC but will run it down.
Given the variation in color and pattern I’d shouldn’t show dirt as easy as the tile in the main house. Which is good for teenagers.
Sent from my iPhone using Tapatalk
-
Blowing Charles crap aside (I mean it is my job.....) I really like that tile. Would have loved to had that in our 100 year old Indiana farm house. Interesting concept :likebutton:
-
Blowing Charles crap aside (I mean it is my job.....) I really like that tile. Would have loved to had that in our 100 year old Indiana farm house. Interesting concept :likebutton:
That’s what I’m thinking.... well more for a future house as I ain’t puttin a whole lot more in this one.
-
I could see that going in my future Idaho cabin.... I meant my wife's cabin
-
I could see that going in my future Idaho cabin.... I meant my wife's cabin
Lol, yeah you’re just the care taker, contractor, site developer, excavator.... on second thought you’re just the slave labor! But aren’t we all.....
-
Amen!
Sent from my iPhone using Tapatalk
-
Well, at least he doesn't have to sleep in the doghouse!
-
Here is the link to the tile on the floor.
https://shawfloors.com/flooring/tile-and-stone/details/timbered-6x36-cs90w/sourwood
-
Thanks for the link!!! That stuff sure is nice!
-
Ok. Off for spring break for a week.
Today I cut all the wood for the base molding and door trim and put it in the casita to dehumidify. It will shrink about 1/4 inch overall so I want it to shrink before I stain and cut to final length
(https://uploads.tapatalk-cdn.com/20190310/08d87ec6ca7b928726b296b7f1e18e35.jpg)
Then I installed the drawers. Still have a couple to go. These self closing soft close drawer slides are nice. May have to replace the ones in the house with these.
(https://uploads.tapatalk-cdn.com/20190310/3178268703a9a2b4d2c91065d1cc8c16.jpg)
(https://uploads.tapatalk-cdn.com/20190310/9a1ac19aa0e5802c8bd93998767e9430.jpg)
More shots of the floor.
(https://uploads.tapatalk-cdn.com/20190310/fa7abea3589ea39f1ed68fa6371ffa0b.jpg)
Sent from my iPhone using Tapatalk
-
You’ll never have to vacuum as you won’t be able to see the dirt ;)
Sent from my iPhone using Tapatalk
-
Just what I was thinking, can't tell when its dirty unless you step on something.
-
Hidden mess aside, that floor looks great!
-
That’s kind of the entire point. The tile floor in the main house is dark and all the same color. Shows up every speck of dirt.
Little hot tub action and now a fire.
53 degrees.
(https://uploads.tapatalk-cdn.com/20190310/ad474c1c4d592422c3e9f7bcd648c9c0.jpg)
Sent from my iPhone using Tapatalk
-
Looking good
Sent from my iPhone using Tapatalk
-
Trying to replicate the cabinets in the main house has me doing things in a weird order. Made the boxes then installed and then made face frames and then stained and varnish the face frame. Not ideal but it works.
So made some progress on the trim. And got quite a few drawer fronts made. I only have two sets of pipe clamps so it’s slow going as I alternate between other work and gluing up drawer fronts.
(https://uploads.tapatalk-cdn.com/20190313/648c46e399205baf152de7bcc61c2e6f.jpg)
(https://uploads.tapatalk-cdn.com/20190313/b7edee68d53af872256daa11f80a55ee.jpg)
Now I have to make the arch tops for the doors, trim the pocket door height and a few other little details.
I’m doing anything I can to avoid the shower tile.
Countertop guys are fabricating the counters and hope that’s about 1-2 weeks out. I can almost. Almost see the finish line.
Sent from my iPhone using Tapatalk
-
Well granite guys called yesterday and said they’d be here this morning! Wow. One place in east texas that moves with a sense of urgency.
(https://uploads.tapatalk-cdn.com/20190314/33eb1e8e271373e653d9e2564588440e.jpg)
(https://uploads.tapatalk-cdn.com/20190314/6da2fa9d32f8e16092a91bbf5f314d8a.jpg)
Just about done with drawer fronts. Gonna have to get some more wood milled to make the doors.
Sent from my iPhone using Tapatalk
-
:likebutton:
-
Here’s the kitchen
(https://uploads.tapatalk-cdn.com/20190314/972e171263da071bc56ca24ed7817951.jpg)
Sent from my iPhone using Tapatalk
-
Looks good TRN
Sent from my iPhone using Tapatalk
-
That is really sharp TRN. Lots of hard work hopefully coming to an end soon and start to enjoy it. :likebutton:
-
Liking it Charles, very nice
-
Thanks guys. Today’s agenda was remainder of the trim in the living area around the pocket door, the arches over the doors and the drawer fronts install.
Found my first real mistake. I’d never framed a pocket door before and used a kit. A cheap kit but it’s what the door place had. As I trimmed it out I realized it’s about 1-1-2 inches shorter than the closet door. The video from the mfg on YouTube I watched didn’t show a 2x4 wall plate at the bottom so I attached the uprights directly to the subfloor and now it’s 1-1/2 inches lower than it should be. It looks good and other than the height difference there aren’t any problems. It’s way too late to fix now. If it keeps eating at me I’ll take the closet door out and cut it down 1-1/2 inches to match. There’s enough molding to cover the gap.
(https://uploads.tapatalk-cdn.com/20190315/1b75325882befe6452515da1ac67ece7.jpg)
I also bought all the waste and supply plumbing for the sinks.
I also ordered more rough cut pine to make the cabinet doors next.
Punch list:
Fabricate cabinet doors,Stain varnish and install
Install finish plumbing- supply and waste for sinks
Buy and install ceiling fans
Install drawers and fronts on vanity
Run conduit and circuit for sewage lift station
Reconnect shower drain after plumbing a valve in it to divert grey water to the area out back (10 teenage girls can over power a septic with showers)
Handrail on steps to porch
Install railing at top of stairs
Finish tiling shower and grout.
Finish plumbing in shower
Have a glass enclosure fabricated for the shower
Install toilet
Install vanity lights and mirror
Install towel racks and toilet paper holder
Install backsplash
Build and install upper cabinets in kitchen
Sent from my iPhone using Tapatalk
-
At least you haven’t shot 1 1/2 nails into the trim affectivly pinning the door open/closed. Lol
Sent from my iPhone using Tapatalk
-
At least you haven’t shot 1 1/2 nails into the trim affectivly pinning the door open/closed. Lol
Sent from my iPhone using Tapatalk
Experience?
Does look good.
-
While I had surgery they started trim in my house, the kid doing it pinned all my doors open with big ol long 16 G nails. Had to fill a bunch of holes
Sent from my iPhone using Tapatalk
-
Took off today and Monday to try to get some progress in since Tuesday I go in for knee surgery and won’t be able to squat or kneel for 4 weeks. Got trim pieces and drawers varnished and some progress on the shower
(https://uploads.tapatalk-cdn.com/20190323/d3969c0f7ed90040a65cf8365deda3c9.jpg)
Seat was cut to small so they have to recut it and the curb top.
Sent from my iPad using Tapatalk
-
so what your saying is that your about to stroke a check and get the shower finished?
-
I have a backup plan in case I don't finish.......
-
Love 7-7s, had 2 big ones last night. Slept great.
Looks good Charles. That whole guest house is pretty high end. You planning on moving in?
-
LOL JR, I might. one month out of the week when they are all "in sync". Either there or the shipping container....
I hope that while the knee is healing I can be building the cabinet doors. Once the shower is done, its just paint in the bath, install the toilet and trim and hook up the drain and supply plumbing.
-
LOL JR, I might. one month out of the week when they are all "in sync". Either there or the shipping container....
I hope that while the knee is healing I can be building the cabinet doors. Once the shower is done, its just paint in the bath, install the toilet and trim and hook up the drain and supply plumbing.
Plumbing while the knee heals? Cabinets I can see.
-
Batteries went out in the Dmax this AM.
-
Looking good TRN. Good luck on the knee. Speedy recovery.
Sent from my iPad using Tapatalk
-
LOL JR, I might. one month out of the week when they are all "in sync". Either there or the shipping container....
I’m gonna need a guest house too... have a third kid on the way (known since Christmas) and found out yesterday it’s another girl. That makes 4 including the wife... plus one cat and the dog. Just me and the cranky old cat keeping the testosterone in check around here (and he has no balls).
Sent from my iPhone using Tapatalk
-
I had heard about that Ryan but not that is was a girl. Wow. That’s why I quit after two. I’m in the same boat. Just me and a neutered cat to hold the man card
Sent from my iPhone using Tapatalk
-
Looks great Charles.
For your own sake don’t rush back to using the knee.
I have a buddy 47 now, had a third scope about 10 years ago, and only took a week off.
Can hardly walk now.
Cabinets yes.
Reloading bench yes.
Tile, plumbing... I wouldn’t.
-
Roger that. That’s why I’m trying to finish the shower this weekend. Time to get back to it. Drove to Corsicana texas to pick up some LLY heads, valve covers and fuel rails this morning. More stuff for a future build.
Sent from my iPhone using Tapatalk
-
LOL JR, I might. one month out of the week when they are all "in sync". Either there or the shipping container....
I’m gonna need a guest house too... have a third kid on the way (known since Christmas) and found out yesterday it’s another girl. That makes 4 including the wife... plus one cat and the dog. Just me and the cranky old cat keeping the testosterone in check around here (and he has no balls).
Sent from my iPhone using Tapatalk
Reading this...You having another girl...and trying to maintain a TBQ (Testerone balance quotient)
Generated a scene in my minds eye
It was holland I think, because the guy was wearing wooden shoes. He was frantic
He was standing next to a dyke (As in a mass of earth and rock)
He had several fingers on both hands plugging holes in the dyke.
He was looking off to his side at a new leak fountaining forward a little stream of water
His look was more of resignation...
Sorry for your situation (Not really!!)
Oh and another thing
A cat does not the man make. Best not mention it unless talking about this spectacular shot you made when.... ;-)
-
Progress. Either getting better or less anal about perfect alignment.
(https://uploads.tapatalk-cdn.com/20190323/a0f1378e300d75b106a4ac4d31f4699c.jpg)
Or both. Lol. At this rate I should be done except the curb and seat tomorrow.
Sent from my iPhone using Tapatalk
-
I have three teenage daughters, wife and a female golden retriever and that B is red headed too boot so don’t get me started....
-
Shawn, you are really out numbered!
-
I’ve managed (with my wife’s) help to keep the TBQ pretty even, 5 boys, 5 girls. Two of each are teens. However, like TRN, I’m glad I have a guest house at times, and 63 acres to disappear on.
Sent from my iPhone using Tapatalk
-
Just me, the wife, and one B dog, and still outnumbered after the 4 girls moved on.
What was this thread about?
-
Progress. Either getting better or less anal about perfect alignment.
(https://uploads.tapatalk-cdn.com/20190323/a0f1378e300d75b106a4ac4d31f4699c.jpg)
Or both. Lol. At this rate I should be done except the curb and seat tomorrow.
Sent from my iPhone using Tapatalk
If it means anything it looks good from here pal!!
Sent from my iPhone using Tapatalk
-
Right now it's just me and one daughter. There is a little boy on his way to even things out this summer though.
-
A boy, dads happy for sure. My first was a girl too. Now she is driving.
-
Well got busy and made some progress today.
Pebble floor is just dry fit at the moment.
(https://uploads.tapatalk-cdn.com/20190324/cf5b245a7d9a7fa8e297d9d1bc26e957.jpg)
Sent from my iPhone using Tapatalk
-
Looking real good.
One last big push.
-
Very nice.
Sent from my iPhone using Tapatalk
-
Laid the pebble tile today. Then went to town to get paint for the bath and a few things to run electrical to the sewage lift station, a couple of ceiling fans
Duh a trench and laid conduit and ran two circuits. One for the lift pump and one for the high water alarm. You don’t want the alarm to be on the same circuit should the breaker trip for the pump you still want the alarm to function if the lift station is not working.
Painted the bath a lighter color and installed the vanity lights
Tomorrow I’ll grout the shower and then start on the supply and drains to the sinks and maybe get the ceiling fans installed
(https://uploads.tapatalk-cdn.com/20190325/7da9c15dccc6b143566749b0c26add86.jpg)
(https://uploads.tapatalk-cdn.com/20190325/cd7b5cace76ec5d984e8a2cb4df1bdc7.jpg)
(https://uploads.tapatalk-cdn.com/20190325/cbaacb3273688e84b550901ab6cf5c9c.jpg)
(https://uploads.tapatalk-cdn.com/20190325/cbaf085d4ea23a8756348cd027c594cc.jpg)
Sent from my iPhone using Tapatalk
-
Got the drawers mounted and drawer fronts on the vanity today.
(https://uploads.tapatalk-cdn.com/20190326/e9cdede58ba66da9222d88e7c8856b74.jpg)
Got one of the fans mounted
(https://uploads.tapatalk-cdn.com/20190326/3bf651e0a007009a4a435c0c48182138.jpg)
And got both sinks supply plumbed.
Got the vanity waste connected.
Stained crown and base moulding for bath and installed some trim on the inside of the pocket door.
Got started on the grout. It’s harder than I remember and the directions resulted in a mix too stiff so I was only able to get about half done.
(https://uploads.tapatalk-cdn.com/20190326/dc4a502f2d39abdd3454dbc2b817d973.jpg)(https://uploads.tapatalk-cdn.com/20190326/9b1348a8e4911fd6a110cbffce4cdd40.jpg)
Sent from my iPhone using Tapatalk
-
Nice work Charles!
-
Thanks Shawn. Waiting on the seat and curb to be recut and the toilet water supply parts in oil rubbed bronze to show up
I’ll finish the last little
Bit of trim and grout and kitchen sinks drain once the disposal arrives.
One more ceiling fan and. Then I have to build the cabinet doors.
Then I’m going to party like it’s 1999
Sent from my iPhone using Tapatalk
-
It's to nice for me,,,,,,,,,
-
Ok. Back at it. Knee not doing too bad.
Put a new spindle on the zero turn mower deck and mowed for the first time this year last night and then put a coat of varnish on the last of the bathroom trim so it would be ready to install today.
Then this morning mowed the rest of the area around the house since it got dark before I could finish last night.
Then installed the trim in the bathroom, installed the oil rubbed bronze toilet supply stuff, set the granite curb and seat in the shower and while I waited on that set up, I plumbed the waste connections on the kitchen sink and installed the disposer
(https://uploads.tapatalk-cdn.com/20190406/2cb3e92b6cc29a8af434f4d071ff5806.jpg)
(https://uploads.tapatalk-cdn.com/20190406/c39685eb40ba43c22ad4b9414413cc0d.jpg)
then back to grout the shower and now just need to wait for it to dry so I can remove the last of the haze and then set the toilet.
(https://uploads.tapatalk-cdn.com/20190406/a8449ef1be05cdd61a6b646998d817a2.jpg)
And just 2 weeks ago this oak tree was bare. When the spring springs it pops
(https://uploads.tapatalk-cdn.com/20190406/3182c96880200d549bc4b9a540014790.jpg)
Sent from my iPad using Tapatalk
-
Looks good man
Sent from my iPhone using Tapatalk
-
Thanks.. Wife thinks I should have run the glass tile horizontal instead of vertical. She can run it however she wants when she builds the next one.... jus saying
Sent from my iPad using Tapatalk
-
When I come to visit I won’t mention the vertical tile.... :tongue:
-
Thanks.. Wife thinks I should have run the glass tile horizontal instead of vertical. She can run it however she wants when she builds the next one.... jus saying
Sent from my iPad using Tapatalk
The original trend was to run it horizontally around the shower but now folks are doing the waterfall type look. I think both look good.
Sent from my iPhone using Tapatalk
-
Looks good, glad the knee is doing ok.
Just put a down on 52 acers in Palomino Valley.
-
Congrats JR. that’s great news!
Sent from my iPad using Tapatalk
-
(https://uploads.tapatalk-cdn.com/20190407/cc28580f9cdf0de3c372a130525341a9.jpg)
Big hail storm
Sent from my iPhone using Tapatalk
-
Looks good, glad the knee is doing ok.
Just put a down on 52 acers in Palomino Valley.
You know the rules. Picture
Sent from my iPhone using Tapatalk
-
Thanks.. Wife thinks I should have run the glass tile horizontal instead of vertical. She can run it however she wants when she builds the next one.... jus saying
Sent from my iPad using Tapatalk
Looks really good. Glad your knee is not holding you down.
Like my wife. Waits until it is all done then has an idea. I honestly have no idea why she says anything other than to poke the bear. She knows I’m not going to change it.
Sent from my iPad using Tapatalk
-
Looks good, glad the knee is doing ok.
Just put a down on 52 acers in Palomino Valley.
You know the rules. Picture
Sent from my iPhone using Tapatalk
In the morning, on the road.
-
Aaaaaaaannnnnd done!
(https://uploads.tapatalk-cdn.com/20190407/b54b36ef6134d027e41a88e807163866.jpg)
Will seal the granite and grout before use and then I have to adjust the thermostat control on the shower handle once I get the propane run to the water heater
Now on to grouting the line between the granite curb and outside tile. Different color than the shower
Then setting the toilet.
Sent from my iPhone using Tapatalk
-
Did you get the cool floor drain that has a hair catcher built in?
Ebbe- America is the brand our tile shop sells
Sent from my iPhone using Tapatalk
-
Looks great.
Your knee Dr must have known what he/she was doing.
Your place is turning green while everything out here is turning back to brown.
-
Flippin' crazy
The notion of working at all the same calendar year as a knee surgery
Nutz!
-
(https://uploads.tapatalk-cdn.com/20190407/4dab6957b6a6789556392e1b42ccdda9.jpg)
Second ceiling fan in
Toilet in
Had to get oil rubbed bronze lever and grind down one tile about 1/8 inch so the toilet would sit flat.
Turned the water on for the first time. No leaks!
Cut and stained and varnished some wood for shelves in the closet.
Now on to propane connection for the water heater
Sent from my iPhone using Tapatalk
-
No leak is a good thing, good job Tex
-
:likebutton:
-
Bro, I hope that knee isn't making deposits in the pain savings account for later withdrawals!
-
Negative sir. All good. Climbed a ladder with 125lb tile saw today and also jogged from house to shop in the rain. No issues. Only time I had to think about it was when I knelt on the right knee on the tile floor this morning. It barked at me a bit.
Oh and Dave, no on the hair strainer. It’s a Koehler solid brass oil rubbed bronze. It’s going to get discharged outback with a flapper valve to keep the septic from getting over loaded. If I ever need to connect it back to the septic I can as the main branch is plumbed to receive it
Sent from my iPad using Tapatalk
-
Nice idea on the flapper.
-
Nice idea on the flapper.
Yea, good thinking. I did that in Tennessee, and do it now at the farm setup
Gives the term "Clean drinking water" a whole new meaning (For the critters)
-
Ok so, I won't take the time to rant on Home Despot with the pick up process for my buy online and pick up in the store order. Suffice to say it was a 35 minute process to just pick up a prepaid order.
So I'm going to plumb the propane this weekend (I hope) and decided on poly tubing and connectors. The poly tubing is stiff and in a fairly tight roll. Suggestions on how to straighten it? Can I kiss it with the propane torch to heat it gently as long as I don't overheat it? Not sure its hot enough yet in Texas to lay it in the sun and get it to soften....
-
Don't think you need that much heat, they will soak it up.
I used sharkbites on moms house, worked great.
-
He's talking about propane, JR. Can't use Sharkbite on that.
-
Beautiful work there Charles! Glad the knee is a non-issue so far - hope it stays that way!!
-
Got the poly gas tubing and connectors and another secondary regulator. Trying to lineup the mini trencher to rent and get the tankless water heater up and running this weekend. Picked out a frameless glass bypass enclosure. Just have to double check the opening is square since there is no adjustment.
Then hope to pick up my lumber order from the sawmil to get started on the cabinets.
Wife is looking for 5 mattresses and misc furnishing
I can smell the finish line
Sent from my iPhone using Tapatalk
-
Seeing the finish line is great, I'm just getting going.
-
What's the bypass enclosure?
-
That’s what they call the shower door that slides like a patio door across a fixed panel. Not enough room for a swing door
Sent from my iPhone using Tapatalk
-
Gotcha.
-
Ok boys. Getting. Closer. Hope to have hot water tonight. Pressure testing the underground poly propane piping.
Wired the electrical to the tankless water heater. Installed shelves in the closet and wife is mopping cleaning.
I ordered the shower enclosure and wife ordered mattresses and box springs.
Still waiting on wood to be milked for the doors.
(https://uploads.tapatalk-cdn.com/20190420/2c2dc182ff71ebfed5b8d6fa890059ef.jpg)
(https://uploads.tapatalk-cdn.com/20190420/e7c8de89ec31fd668a38401cf1ce6ed2.jpg)
Sent from my iPhone using Tapatalk
-
Texas must be a strange land.... never heard of wood being milked before! :facepalm:
-
Texas must be a strange land.... never heard of wood being milked before! :facepalm:
That makes two of us...
:knucklehead:
-
Milled, you knuckleheads
All the propane connections checked out and the tankless heater works great and the pool heater still works so I didn’t screw that up when I replaced the lines.
Just cleaning and putting tools away now.
Sent from my iPhone using Tapatalk
-
Getting closer.
Cut downspouts today. Of course no gloves. Hands and fingers all nicked up from sheet metal work.
Covered the gas lines cleaned up tools and shop and burned some downed limbs
(https://uploads.tapatalk-cdn.com/20190421/d8aff574f6313a26893344f63918d281.jpg)
Sent from my iPhone using Tapatalk
-
Dang that looks good... I'll head that way. Do I need to bring my own pillow?
-
H arm will do I am sure ken
Sent from my iPhone using Tapatalk
-
Nope. Just ordered towels and linens from Amazon. And put my backup kuerig coffee pot out there.
Sent from my iPhone using Tapatalk
-
So your not telling Ken that he can bring H by for a trip?
Sent from my iPhone using Tapatalk
-
Looks good Charles :likebutton:
So all of you with second “places” wondering what the average age here in which you purchased them? I’m thinking of acquiring at the minimum the ground in the next five years somewhere off the beaten track. That would put me at barely still middle 40’s but depending I could be 50 before it happened too just a lot depends on how the next several years play out.
-
I'm 51 Shawn, and feel like I'm starting 10 years too late... but couldn't afford it 10 years ago.. matter of fact, if it wasn't for my wife's income, I still wouldn't have land.
-
I was in my 50's when I purchased place numba deux. Paid cash for it.
I think that makes a difference. Probably don't want to hold a mortgage on your second/go-to/retirement property. The place in the burbs...Mortgage the heck out of it, but the farm, I'd think it best if you can pay most or all of the money out of the chock blocks
-
I was in my 50's when I purchased place numba deux. Paid cash for it.
I think that makes a difference. Probably don't want to hold a mortgage on your second/go-to/retirement property. The place in the burbs...Mortgage the heck out of it, but the farm, I'd think it best if you can pay most or all of the money out of the chock blocks
Copy guys, yeah this will be a cash deal when it happens. I only plan on having one mortgage. The shop was kinda an unexpected purchase really. I mean it wasn’t totally unexpected but it depleted a lot of reserves for us. So that’s where I am thinking another 5 years to recoup before another large purchase again. Plus I have three kids off to college within next 5 so we’ll see how that goes too.
-
I was 36 when I bought our first second home. Lake house, boat, sea doo, etc. Then kids came along and it was just too much to keep up with with small kids. Held our powder until I was 46 and we bought the second second home when the kids were 10 and 8.
Most people buy a second home and then 5 years later don’t use it as much and wind up selling it. Wait until you have the chance to buy exactly what you want. Do it once.
Sent from my iPad using Tapatalk
-
So far I am paid up with the new land and what goes there.
My current home is my first I got it in 95. Worth 4x times what I paid with about 1/2 mortgage. If Ca goes as I think, I may walk away.
-
I was 36 when I bought our first second home. Lake house, boat, sea doo, etc. Then kids came along and it was just too much to keep up with with small kids. Held our powder until I was 46 and we bought the second second home when the kids were 10 and 8.
Most people buy a second home and then 5 years later don’t use it as much and wind up selling it. Wait until you have the chance to buy exactly what you want. Do it once.
Sent from my iPad using Tapatalk
Copy, as Don stated in another post it’s nice to pee of the back deck and shoot at things. I can’t do that in our new home addition (legally anyhow). At the shop we can as it’s a gun friendly zone but I don’t advertise around there (for the record Ken I’m talking about firearms). So as much as I like and enjoy minimal upkeep at these two places which allow me to focus my time on other ventures. I do plan on ending up somewhere a little off the beaten path a bit in the end. I also would like a place I can take grand kids to some day and teach finer points of things like dirt bikes, cutting wood and shooting things.
-
Here, here,,,,,,,,,,,,,
-
So bathroom hardware came in. Towel ring, TP holder towel hooks etc
Also all new towels, handtowels and washcloths and new bed linens
I’ve been fixated on buying a new chainsaw. Think I have it narrowed down to a Stihl 241, a pro level 40cc saw as a day to day lightweight saw for small stuff. The big Husky with the 28 inch bar is a bit much at about 16 lbs just to cut small trees and limb and trim.
Gonna take off tomorrow and pick up mattresses and go to the hide and mow
Sent from my iPhone using Tapatalk
-
Have you posted about your 28 inch? How do you like those green makita saws?
I think any excuse to buy a new saw is a good excuse. I want a 30 plus bar but haven’t found a reason. Gonna start planting trees soon
Sent from my iPhone using Tapatalk
-
Tex, the longer the bar the less you have to bend over to make the cut. I have a 20 inch Husky and wish it was a 36 inch most every time I use it.
-
Bob I can run a 32 on the saw I have (5.5hp) but holding it upright for 30 minutes is a chore no matter how young you are.
I need a smaller lighter saw for light work on the ground and up in the trees
Sent from my iPhone using Tapatalk
-
You really should consider an electric one for light stuff. I was the biggest skeptic but it is extremely handy. Just used mine today.
-
I also have an electric that came with a pole. It is handy. Works well for hedges also. Also have a 16 Stihl, 18 and 20 Jonesred.
-
I'll get an electric for the wife....jus sayin....
-
You really should consider an electric one for light stuff. I was the biggest skeptic but it is extremely handy. Just used mine today.
Still am a skeptic, simply because I like my saw and it’s that perfect in between of just too small for some jobs and just too big for some, but can be used for both....
That said, neighbor bought an electric from harbor fraught, and dangit, if it isn’t just handy. If I needed a smaller saw I might consider an electric. But for now, I’ll use our stihl, I think it’s a 391 with 20” bar. When we lived in GA I used it all the time to prep firewood to heat the house, and new exactly what it was, now I’m not 100% certain on the bar size.
-
Mine uses it and says she cuts more than me with a bigger one.
-
The DeWalt will keep up with my old school 250(?) with a carbide chain... not exaggerating... without the noise and doesn't bog down. Your wife would cut more than you. ;)
Won't keep up with my 261 but gives it a run for the money.
-
Do it Charles
Sent from my iPhone using Tapatalk
-
:popcorn:
-
I'll get an electric for the wife....jus sayin....
TRN I have an old Stihl Farmboss that I use and works great. I do have a couple different bars and chain combinations but rarely swap them. It is on the heavy side so I tend to cut everything horizontal and let the weight of the saw rest on the wood. I would have never thought of buying a cordless chainsaw for the light vertical stuff until I watched this video.
If you already have the batteries for other tools it might make sense. I haven't gone that route yet so I would appreciate you spending your money and trying it out and letting us know. LOL
https://youtu.be/1RwF5Gg5LFs
Plus if one of your friends see's it in your tool shed you can just tell them it's for "your wife". :)
Don't forget your life preserver if your heading out mowing. :likebutton:
-
I'll get an electric for the wife....jus sayin....
You know the rules...
We need a picture and video of Wife unit actually cutting wood would be great! :popcorn:
-
That electric saw would be sweet to mount on a trail bike. There are a few trailers here that when the snow burns off you find a large tree down and the gas saws are lots more weight to carry on the front forks.
In past I ride around or under tree but that would be helpful for the first ride Justification?
Sent from my iPhone using Tapatalk
-
When Charles goes quiet on his own thread I imagine him saying:
Silence, I keel you!! Hahaha
-
IKU
-
Found a 241 on sale for steel dealer days for like 467 and at 13+ pounds for that battery powered chainsaw my 5 1/2 horse power 372 XP Waze about that and there’s no way that I want to be using a 13 1/2 pound chainsaw just to cut up a little limb
But at the moment I’m hauling a bunch of mattresses with a license plate that says redneck I look like the Beverly hillbillies(https://uploads.tapatalk-cdn.com/20190426/aa18b046b30638d07bbed4a74de76382.jpg)
Sent from my iPhone using Tapatalk
-
But at the moment I’m hauling a bunch of mattresses with a license plate that says redneck I look like the Beverly hillbillies(https://uploads.tapatalk-cdn.com/20190426/aa18b046b30638d07bbed4a74de76382.jpg)
Sent from my iPhone using Tapatalk
Come and listen to my story about a man named Charles...
-
Reddddd that is... big trucks and bronkin' bucks
-
Just needs a couple riders up there!
Could just see granny up there with an old side by side.
-
(https://uploads.tapatalk-cdn.com/20190426/02a1ba27ddccc9617ad2dda7d34c6d11.jpg)
This thing is quite the little bobcat. It screams.
Sent from my iPhone using Tapatalk
-
For you Shawn
https://youtu.be/Wo2DiC74fhU
Sent from my iPhone using Tapatalk
-
So that little black handle looking thing, is that the electric plug in? Nice looking saw Charles, might be a tad big for tree work but time will tell. Nice grabber teeth too.
-
I see you have the proper PPE on too!!! Close toed shoes... should be a great little saw.
On electric, house I’m currently tending to owns all electric yard tools, them worx brand things... blower and weed eater are really quite impressive. Battery lasts a lot longer than expected.
-
But those are too girly for Charles Wyo.
I guess my testosterone is running low... just the thought of pulling a cord makes me tired.
-
For you Shawn
https://youtu.be/Wo2DiC74fhU
Sent from my iPhone using Tapatalk
I’m impressed, it started! :tongue:
-
And it’s 4 pounds lighter than the battery saws....
Now I may try a battery powered pole saw pruner soon. That seems like the perfect type use for a battery saw.
Started making cabinet doors yesterday and found that my second set of pipe clamps were for 3/4 pipe instead of 1/2inch. Need to return and exchange them.
Had some lumber milled for bunk beds and may have over shot the mark. 6x6 posts are stupid heavy and true 2x8 rails are also heavy. Guessing the bunk beds will weigh 400+ pounds. May have to think about that a bit.
Sent from my iPad using Tapatalk
-
6x6 posts are pretty massive for bunk beds. Can’t wait to see what they look like. Have a older lady who came into the cabinet shop and asked us if we could build bunk beds. We plan on it. But don’t have a plan of attack yet
Sent from my iPhone using Tapatalk
-
Yeah, 4x6 might have been a better choice. However, the 6x6 would be really cool looking and if Ken ever brings H over she could sleep on the top bunk w/o anyone having to worry about it collapsing on them! :facepalm:
Maybe some strategically placed removal of wood would help the weight on those posts? Bore holes from the ends in with a large bit or router out some deep grooves in back side possibly? Could even incorporate it as part of the joiner process, get creative to lighten it up but keep the appearance.
-
Take that new chainsaw and carve them up a bit to make them look rustic
Sent from my iPhone using Tapatalk
-
Take that new chainsaw and carve them up a bit to make them look rustic
Sent from my iPhone using Tapatalk
Don’t do this ^^^^^ unless you carve eagles and various animals from tree stumps in your spare time! :knucklehead:
-
And it’s 4 pounds lighter than the battery saws....
Now I may try a battery powered pole saw pruner soon. That seems like the perfect type use for a battery saw.
Started making cabinet doors yesterday and found that my second set of pipe clamps were for 3/4 pipe instead of 1/2inch. Need to return and exchange them.
Had some lumber milled for bunk beds and may have over shot the mark. 6x6 posts are stupid heavy and true 2x8 rails are also heavy. Guessing the bunk beds will weigh 400+ pounds. May have to think about that a bit.
Sent from my iPad using Tapatalk
10 lbs dry...vs
DeWalt 12.2 lbs...
Must be looking at the Milwaukee. 14.4 lbs. Didn't realize how heavy those things are (both brands).
Well, I guess you are getting up there in age... don't wanna twist an ankle carrying a chainsaw around. :wink
-
I’ll ignore that Ken. I have the towel holder and toilet paper holder mounted bedframe assembled and one post finished for the bunkbeds
(https://uploads.tapatalk-cdn.com/20190427/ce670a7ed693dac1554d7373afe728f8.jpg)
(https://uploads.tapatalk-cdn.com/20190427/21e8a23d910617d792db92c34fa20857.jpg)
(https://uploads.tapatalk-cdn.com/20190427/33fb232d83dbe9524ad817bd3bf62c37.jpg)
Well that cuts it down from 115 to about 80 pounds
Sent from my iPhone using Tapatalk
-
Don't get mad when I copy your cabin in the next couple years. Beautifully done my friend.
-
Ken my dream is to build it again in ID or MT. If you want to replicate I’m happy to help you. Would love to come up and help.
Sent from my iPhone using Tapatalk
-
Ken my dream is to build it again in ID or MT. If you want to replicate I’m happy to help you. Would love to come up and help.
Sent from my iPhone using Tapatalk
Such a deal, Ken don't pass that one up. If I can still drive the truck and trailer when you get going on it I will drop over and "WATCH"
-
Ken my dream is to build it again in ID or MT. If you want to replicate I’m happy to help you. Would love to come up and help.
Sent from my iPhone using Tapatalk
Such a deal, Ken don't pass that one up. If I can still drive the truck and trailer when you get going on it I will drop over and "WATCH"
You ok bob?.....or are you talking about the weather?
-
Well got a call from the constable. My huge red oak by the front of the property fell on the road and blocked it. TX DOT was called and they cut the big limbs and pushed them up in a pile by the fence.
(https://uploads.tapatalk-cdn.com/20190502/362e40470f71f886cd999ca7ff7d7b71.jpg)
I had planned to cut it down in the next couple of weeks. It wasn’t looking too well
Sent from my iPhone using Tapatalk
-
DANG!!!!!! That will he some GREAT sippin by the fire pit wood right there!
-
Yeah. I’m not even sure my 28 inch bar will get through the main trunk in one pass. But the new small saw is a real work horse. I worked it 3 1/2 hours and it ate through everthing. Most of the limbs they piled up by the fence are about 10-12 inches in diameter. It was finicky to start a couple times so I’ll keep an eye on it. It sure is nice to have a powerful 10lb saw. Tomorrow I get to run the beast and tackle the main trunk and big forks. If I do it right I may be able to avoid bad damage to the barbed wire fence as it’s stretching the top to strands but the branches are holding it up where they hit the ground.
Sent from my iPad using Tapatalk
-
Lots of work there. Be careful sir.
-
Dang, wish I was closer! I’d love to come help run a saw for a day to cut that up! Always enjoyable work.
-
Can you get alcohol free gas? That'll make start better and last longer.
Guess you have firewood for the season.
-
Like JR said, but I don't think it matters. Just pour it on the tree and light it.
Oh, I think he was talking about the chainsaw. :rollseyes
-
In that instance I recommend diesel
-
In that instance I recommend diesel
Less boom, more burn (actually did that at scouts last weekend)
-
I always cracked the water filter on my fass. Filled up a water bottle and dumped s little on when the kids were not looking. Than I would drop in my match and they were always amazed at my one match fire. Non the wiser
Sent from my iPhone using Tapatalk
-
Yes I have super unleaded no ethanol I get from the farm and fuel store. Gas and oil mix is fresh.
I learned the hard way not to use gas to start a fire. Almost blew myself up. Had a pile of leaves about 10 ft in diameter and 4 ft tall that I poured gas on and then realized the match box was empty. By the time I went to the house and retrieved another box it had all vaporized and was trapped between all the leaves.
One match and it exploded loud enough to bring neighbors of their houses from 3 doors down. I must of looked like that cartoon character with soot face and white, wide open eyes.
Sent from my iPad using Tapatalk
-
Been there before Charles. I have a 4-5' deep burn pit in the back yard. All I had was a gallon of white gas, a propane torch, a couple dead Christmas trees, and 4 semi drunk buddies around the perimeter of said hole. I'm no longer allowed to start camp fires.
-
I started a fire once with gas, once.
-
Been there before Charles. I have a 4-5' deep burn pit in the back yard. All I had was a gallon of white gas, a propane torch, a couple dead Christmas trees, and 4 semi drunk buddies around the perimeter of said hole. I'm no longer allowed to start camp fires.
Recipe for a hold my beer moment there.
-
I know he’s lying now....
“Semi” drunk....lol..
Sent from my iPad using Tapatalk
-
Do you have a “sawmill” bar attachment Charles?
An oak like that will have some nice wood in it if you are inclined to oak.
Also makes some great wood fire steaks too.
-
Even better Sam. I have a sawmill about a mile down the road and I know the owner. He’d mill what ever I wanted.
I do need a table,maybe that would work. I’ll see how big a slab I have to work with
I have a 20ft trailer piled high with just the wood 4 inches and better from the limbs and haven’t touched the mains yet.
Sent from my iPad using Tapatalk
-
Best way to start a huge bonfire at an outdoor bachelor party- Gallon of gas poured on huge brush pile, 1/4 gallon of gas set 3 feet away, light candle behind 1/4 gallon - one well placed shot from shotgun from a suitable distance and BANG! Instant blaze, no burnt appendages and lots of bugged out eyeballs magically return to their sockets amid laughter and another cold beer!
-
Or a Roman candle into the brush pile
Sent from my iPhone using Tapatalk
-
Can’t have those in Illinois - they’re DANGEROUS you know :laugh:
-
I always cracked the water filter on my fass. Filled up a water bottle and dumped s little on when the kids were not looking. Than I would drop in my match and they were always amazed at my one match fire. Non the wiser
Sent from my iPhone using Tapatalk
Sneaky...Effective...Good ;-)
-
Can’t have those in Illinois - they’re DANGEROUS you know :laugh:
Have to protect that shrine of political wisdom...
Please move... ;-)
-
Got up at 04:00 and drank quoffee until 05:00 then left for the hide. Made good time but along I-45 there was a large pine tree down on the northbound side in the dark. I came up on it about 5-10 minutes after it happened. A few vehicles were pulled over with flashers on. An ambulance stopped and blocked the freeway to keep others from hitting it. Miracle no one was killed.
Stopped for breakfast in Trinity at a little place where old men drink coffee and chat loudly.
Made it here about sun up and got to work on cabinet doors and while some were glued up I tackled the shower enclosure. It really was a two man job handling 1/2 thick panels of glass but I managed to dodge a bullet.
(https://uploads.tapatalk-cdn.com/20190504/27638a4a40dfdbcd1f0ed0df7570275a.jpg)
Then adjusted the temp on the water heater
Sent from my iPhone using Tapatalk
-
Barn door style, cool.
-
Thanks.. It went up by more than $100 the week after I ordered it on Amazon...
Sent from my iPad using Tapatalk
-
That finished off the shower nicely.
-
Well between gluing up cabinet doors and staining I tackled this today. My 28 inch bar would not get through it in one pass.
Sharpened the chain and took some height off the depth gauges and that made a huge difference. It went through 30 plus inches of red oak like butter. (https://uploads.tapatalk-cdn.com/20190505/d46fa844cc80251ccbb9f0f554ba6ba3.jpg)
And I was able to save the fence.
Sent from my iPhone using Tapatalk
-
That's some nice looking wood Charles. (Be nice)
-
Red oak. Hard. That piece on the other side of the fence is about 6 foot long I’m going to see if my tractor will move it and I’ll take it to the mill and have it milled into wood for a table
Sent from my iPhone using Tapatalk
-
Charles,
How would you process the wood? as in drying to avoid cracking, how thick to make the slabs? I'd like to make a few things likewise, but to buy one kiln dried slab of oak is stupid expensive like 150 iirc.
-
Hey Steve, How’s the dually? I have a guy down the road that has a mill. I figure 4-5 inch thick slab won’t have much warping, but I will ask the miller. Seems like the bigger the lumber the less warparge
Sent from my iPad using Tapatalk
-
Dually's fine not driving much working in NC I was talking to a guy at a local sawmill and he told me that in the winter the trees have less sap and when they dry they are less prone to crack. I don't know how that will work for Texas oaks, but i was just wondering. Keep us updated on how that works.
-
Charles,
How would you process the wood? as in drying to avoid cracking, how thick to make the slabs? I'd like to make a few things likewise, but to buy one kiln dried slab of oak is stupid expensive like 150 iirc.
With that, square up the sides and make 2" pases
Stack them under a roof with stickers at 2' intervals along the length.
Let them sit a year then plane them and build the ark if you so desire.
I'm doing the same thing with the Ash trees the borer killed in my yard. Have two nice 8' and 10' logs. Going to make a kitchen and a coffee table out of them.
-
I have a buddy with a mill.
He said same as Don, except one year per inch thickness for oak.
I’d slab it in around 2 inches. Heck of a lot of board feet there.
And it looked like a really healthy tree.
If the loader can’t lift it...there are ways...
-
Well. Got the cabinet doors installed and the granite countertops sealed
(https://uploads.tapatalk-cdn.com/20190511/fd6d9dd9be3aaf0376f6e3ee067521ca.jpg)
(https://uploads.tapatalk-cdn.com/20190511/90764777e87dab93276d2f0bd3cab369.jpg)
Making the drawer/door for the last spot. It’ll hold cutting boards and knives.
Went ahead and made the upper cabinet for the right side. Not sure about the left. I’m contemplating cutting the counter and cabinet and putting the fridge there instead of to the side.
Sent from my iPhone using Tapatalk
-
I won’t recreate the log splitter drama but the new carb showed up today. It will run this weekend or get blown up
Sent from my iPhone using Tapatalk
-
I won’t recreate the log splitter drama but the new carb showed up today. It will run this weekend or get blown up
Sent from my iPhone using Tapatalk
I sat blow it up, long range :tongue:
-
I sat blow it up, long range :tongue:
Tannerite!!!
Sent from my iPhone using Tapatalk
-
Leave the tank full!
-
Please place an action camera about 10yds away from its final moments! And maybe a video from your long range perspective. Of course, it will run, but if not.... the video would be fun!
-
But it needs to be one of those crazy expensive high-speed cameras like they used on Mythbusters whenever they would blow something up.
Sent from my iPhone using Tapatalk
-
But it needs to be one of those crazy expensive high-speed cameras like they used on Mythbusters whenever they would blow something up.
Sent from my iPhone using Tapatalk
Im sure don could give some good recommendations on cameras that can/cant take a beating...... :popcorn:
-
But it needs to be one of those crazy expensive high-speed cameras like they used on Mythbusters whenever they would blow something up.
Sent from my iPhone using Tapatalk
Im sure don could give some good recommendations on cameras that can/cant take a beating...... :popcorn:
Just had a panic attack just hearing about cameras (or chain saws, or tractors, or...) ;-)
-
So, mowed today. Some rat had chewed through the top of the tank on the push mower.
String trimmed today for the first time since last fall. Going around the pond was a bear with grass at least 2 ft tall.
Then piled up all the limbs from the big oak out front and put some diesel on it and lit it. 6 hours later and all we have left is this
(https://uploads.tapatalk-cdn.com/20190519/b90f7645f50d519068255051b167434e.jpg)
I also stained and varnished the upper kitchen cabinet and doors for the casita and hung a shelf over the toilet to hold towels and installed smoke detectors that link to the alarm.
Pretty much done except making the bunk beds
Sent from my iPad using Tapatalk
-
How did you not end up color matching more parts on this pickup?
Sent from my iPhone using Tapatalk
-
I bough it how it sits other than wheels and I changed the color matched handles for black
Front is pretty peppered up with rocks and bugs. At some point I may have it painted, but then I’d be anal about not scratching it which would be tough since I use this like a truck.
My Denali is the pavement princess. It’s one year old next week and has 10,400 miles on it
Sent from my iPad using Tapatalk
-
Got cabinet mounted and one door. Didn’t realize I was out of hinges.
Made the crazy thin drawer to hold cutting boards. Getting all 4 slides on correctly was a bear.
Then realized I made the drawer front too big. Had to go make another. After the glue dries I’ll stain and varnish.
Made the railing and stiles for the stairs.
Hung the mirror and the smoke detector that’s connected to the alarm via the internet.
(https://uploads.tapatalk-cdn.com/20190519/fc224aaea9697e482f392183f58f28b0.jpg)
(https://uploads.tapatalk-cdn.com/20190519/69446572b2e679e3f34e98fa868de652.jpg)
(https://uploads.tapatalk-cdn.com/20190519/f4b4cd6a4cae2afdbb33cdbe1959de81.jpg)
(https://uploads.tapatalk-cdn.com/20190519/5515d845058140399548c603d016f8bf.jpg)
(https://uploads.tapatalk-cdn.com/20190519/e83faca2ef924ee322b9e73d58c147e9.jpg)
Sent from my iPhone using Tapatalk
-
That place looks outstanding Charles! Really beautifully done-
-
Thanks Mike. I’m soooo close to being done. Almost 2 years.
Sent from my iPhone using Tapatalk
-
Thanks Mike. I’m soooo close to being done. Almost 2 years.
Sent from my iPhone using Tapatalk
I’m just building a truck and I tell myself the same thing.
Nice job Charles!!!! You clearly have a career after your existing one if you so chose it! Your work is great.
-
X3
Truly an outstanding project, start to (nearly) finish! :likebutton:
-
Ok. So I didn’t give up on the Kohler engine. But I changed carb and plug and still not working.
So since I needed a no doubt solution I stopped today and bought this
(https://uploads.tapatalk-cdn.com/20190524/3bd4ddcb4f91f3f4ae11c3273f25ef88.jpg)
Sent from my iPhone using Tapatalk
-
So I get here about 12pm and swap it out. Fill her up and add oil and.......
Nothing
Shoot ether in it. Starts and sputter a dies
Same as the old
Then it hits me. I could swear I added new ethanol free super unleaded to the can that I was filling both engines from. But when I drained the tank into a bucket that was white it looked awfully yellow.
Went to the station and bought fresh gas and can.
Filled it and it fired right up just like a Honda should.
So apparently neither the Kohler or the Honda has enough compression to run.....on diesel. :eek
:tongue
So I drained the Kohler and filled it and it fires right up.
At least now I have a spare. That will fit the splitter, the pressure washer or the tiller. I’ll drain it and spray it with oil in the cylinder and put it on the shelf
Sent from my iPhone using Tapatalk
-
It’s already got oil in the cylinder from the diesel... :knucklehead:
Sorry did have prior to you refueling and running. CM
-
Think I have the same issue with the Polaris. Starting running bad after I filled it, just gas I had laying around.
-
Man if I only had a nickle for every gas motor I serviced with diesel... :facepalm:
-
Got the other door on the upper cabinet mounted, got under cabinet LEDs installed and the small sliding drawer face built and stained. Will varnish today and install.
Added a second security keypad in the casita with siren and a camera to go with the smoke detector.
Will pressure wash the outside and porch to prep for tinted stain on the deck and call this project done!
At least until I decide whether to add the second upper cabinet on the left or cut the countertop and sink the fridge into that space instead of leaving it setting to the side. I can never have too much shop space and the wife can never have too much fridge space apparently. I wanted a smaller fridge but now that i have the larger one, she doesn’t want to get rid of it.....
Sent from my iPad using Tapatalk
-
Split a bunch of red oak today. Gonna be sore from muscling the big rounds on the splitter. 24 inches thick and 28 inches wide red oak. Will feel it tomorrow still have a bunch to do but stopped and got in the pool with the family and then grilled burgers and dogs and now working on a bit of muscle relaxer (130proof)
(https://uploads.tapatalk-cdn.com/20190525/29d7f4b040aa5651979a6edbfab737e0.jpg)
Sent from my iPad using Tapatalk
-
Now I know why I hurt so bad. I just calculated the weight of the logs I was pushing around. 61 lb/ft3 for wet red oak. Means the biggest rounds were about 400lbs
Sent from my iPad using Tapatalk
-
Charles will you please do a walk though of the complete casita taking photos and post them in one group
It’s really hard to scroll through all the posts and show my wife lol
Sent from my iPhone using Tapatalk
-
Ok Dave. Tomorrow.
Sent from my iPhone using Tapatalk
-
You know Charles, all that work will make a man of you,,,,,,,,,,,,,,,,,
:knucklehead:
-
Thanks guy.
Sent from my iPhone using Tapatalk
-
You know Charles, all that work will make a OLD man of you,,,,,,,,,,,,,,,,,
:knucklehead:
Fixed it-
-
Back at it
(https://uploads.tapatalk-cdn.com/20190526/9e606d7d14802e863dd427973504c23b.jpg)
Sent from my iPhone using Tapatalk
-
So Dave, here is the (mostly) finished product.
(https://uploads.tapatalk-cdn.com/20190526/76eea2e64800c80a62cbc34ee456a59a.jpg)
(https://uploads.tapatalk-cdn.com/20190526/63bca89ee7f7e037c7d1768700c99629.jpg)
(https://uploads.tapatalk-cdn.com/20190526/ff94ad7a1f9bb47d92f6ed037fc9add1.jpg)
(https://uploads.tapatalk-cdn.com/20190526/9b6d902472c29eb525eedde44b90d648.jpg)
(https://uploads.tapatalk-cdn.com/20190526/4b07701960e46d35f58414d9d45beddb.jpg)
Sent from my iPad using Tapatalk
-
(https://uploads.tapatalk-cdn.com/20190526/bab9a0064ccf989e5edfaa94d76f4111.jpg)
(https://uploads.tapatalk-cdn.com/20190526/000db22a3336ec0368938e9b0a7e4cda.jpg)
(https://uploads.tapatalk-cdn.com/20190526/08686922a7b4fecdbd92ea3fd21d2338.jpg)
(https://uploads.tapatalk-cdn.com/20190526/f644e6b0894c644e4965d75e5100f007.jpg)
(https://uploads.tapatalk-cdn.com/20190526/0b2b642b7a923cb3a83bb789baa50d1d.jpg)
Sent from my iPad using Tapatalk
-
(https://uploads.tapatalk-cdn.com/20190526/8b5ce15faa6f3f3e6ad22a17f4d0eab2.jpg)
(https://uploads.tapatalk-cdn.com/20190526/c773efc40d1be32add759d793f343088.jpg)
(https://uploads.tapatalk-cdn.com/20190526/6e39f43e8933911a90c87c5bd6ba99f8.jpg)
(https://uploads.tapatalk-cdn.com/20190526/f2733d82ae6efd3c36daafe74df0c8a6.jpg)
Sent from my iPad using Tapatalk
-
Just a few odds and ends to put the finishing touches.
I have two more of those barstools, we’ve been hanging on to those for 10 years since it took us more than a year of looking to find them and then we moved and the current house does not have a bar height counter. Going to have a bar height table in that space.
Tv will mount in the corner
Can’t decide yet wether to leaver the fridge where it is or cut the countertop and sink it in the left side of the counter, in which case, no second upper cabinet. Once that decision is made I’ll tile the backsplash. Same tile as the shower and the glass insert.
Upstairs I just need to finish the bunk beds I’m building and then some bean bags and a storage trunk.
Once the handrails on the porch season, I’ll stain the porch and posts and railing.
Sent from my iPad using Tapatalk
-
Looks great. To bad you couldn't just sink the fridge into the wall its at. Isn't that a MW behind it?
-
Thanks. It’s the pantry/closet. Can’t give that up.
Sent from my iPhone using Tapatalk
-
That is a very nicely built “casita”! I air quote that because it is way above the average home in quality. Job well done sir!
-
I'd live in that on a bet!
And be darned happee!
-
TRN. Very nice work. Really amazing. How is the knee doing?
Sent from my iPad using Tapatalk
-
Thank you for posting photos The wife and I like it, I don’t remember why you didn’t pour a foundation. Did that get covered a year ago when we started this?
Sent from my iPhone using Tapatalk
-
I'd live in that on a bet!
And be darned happee!
Yes sir. Feel the same here.
-
Thanks guys.
Dave I decided on post and beam because of the slope and because I wanted to do it all myself without hiring out foundation. Seems to fit the theme even though the main house is on slab.
Remember this started small and got out of hand quick.
Knee is almost 100%. Still taking it somewhat easy. Doing some moderate leg presses at the gym, about 330 with higher reps. Not running yet but about to start.
Finished all the wood splitting. Man that was a lot of wood.
Pressure washed the casita and porch and then pressure washed all the flagstone around the pool, porches and kitchen area.
Smoked a pork butt overnight and now chillin and about to head home in and hour.
Sent from my iPhone using Tapatalk
-
Starting to get some finishing touches on it. Still have to stain the porch and install a small amount of finishing trim (will get done tomorrow). Stain will have to wait for the wood to dry after today’s rain.
Gotta get after the bunk beds.
Today assembled some chinaman furniture for the porch. Matches what’s on the porch of the main house.
(https://uploads.tapatalk-cdn.com/20190605/f465b5411ce676aa0b13582c561774a5.jpg)(https://uploads.tapatalk-cdn.com/20190605/26b490eafd1be882c85aa600902a2045.jpg)
Sent from my iPhone using Tapatalk
-
I lied. Installed the keystones and cabinet trim tonight.
(https://uploads.tapatalk-cdn.com/20190606/5d95fcaf78cdb2c9d6a39fd8a0556890.jpg)
(https://uploads.tapatalk-cdn.com/20190606/db97a163375ffcb8ea97232851c528e3.jpg)
Sent from my iPhone using Tapatalk
-
Today I loaded the 6ft section of log onto the trailer and took it to the mill
(https://uploads.tapatalk-cdn.com/20190607/e670cb9a1dc85d04173e8a4cd984264b.jpg)
(https://uploads.tapatalk-cdn.com/20190607/dd0357bc71dc3275b6e85507a9df4e89.jpg)
The bottom was a bit too big for the mill. Those pieces are 4 inch thick 6 ft long and 28-30 inches wide
Sent from my iPhone using Tapatalk
-
Did you lay down to take that picture?
-
If he lifted those, he should be!
Is that off the red oak?
-
Yea. The last of the red oak. It’s really pretty. Those slabs are about 250 each.
Sent from my iPhone using Tapatalk
-
250 lbs or $250.00?
-
Maybe both Lol. They weigh 250. Miller tells me they aren’t cheap either.
Sent from my iPhone using Tapatalk
-
Maybe both Lol. They weigh 250. Miller tells me they aren’t cheap either.
Sent from my iPhone using Tapatalk
korrekt!
Once milled, that firewood takes on a new life, a very spendy one
-
Working on bunk beds.
Not even Ken’s girlfriend could break these.
(https://uploads.tapatalk-cdn.com/20190609/7fe9819bf700fd61ce66050b3d865f73.jpg)
True 6x6 and true 2x8. True 2x6 for the steps.
Sent from my iPhone using Tapatalk
-
Are you going to use the loader on the tractor to move them?
Sent from my iPhone using Tapatalk
-
Wouldn't it be cheaper and lighter to just put your kids on a diet?
-
Wouldn't it be cheaper and lighter to just put your kids on a diet?
Charles was planning ahead in case you brought your gf for a visit, sure he will rent front end loader to get her in and out of it too.....
-
Man that’s big!
Whoa, that's serious! What are you naming it, USS North America? Does it come with its own zip code, what's the area code for that thing? I bet it creates its own mini gravitational field! Do things suddenly pop off the ground and start to orbit around it?
Does ATC offer clearances for low flying jets to safely clear that thing? You know you have to put blinking lights on anything taller than 200 feet! Have you ever seen mini weather systems forming on the inside? What sort of viewing system (Telescope??) do you use to see from one end to the other?
What about communications?? I assume you have several cell phone towers erected here and there on the inside! Have you ever lost a small child on the inside? Does it require climbing lessons to be able to get to the sleeping areas? And when you get there do you require oxygen to stay there? Do you ever see birds of prey swooping about on the inside?
Do you get a decent quality echo? HELLO, HELlo. HEllo, hello... Has the national park service ever contacted you about allowing visitors to view the vast interior expanses?
Do the people living on the inside all speak English? Any river or mountain systems forming in there? Is there enough room to do a full stop landing or perhaps a go around with a full traffic pattern?
Is there cultural diversity between the various people living on either end? Has the US navy asked to use it for night landing practice for F-18's? If you had to turn it would it require an addition to the national highway system? Has it showed up on any police or FBI Intel report as a UFO?
Has the military ever been sent to investigate it? Do people in white coats ever show up to drill core samples in it to determine its make-up? If it were to move, then stop suddenly would it show a tic on the Richter scale? Say in China? Is it visible from space? And have you ever noticed the formation of polar caps on either end?
Man be careful with that thing, its big!
-
Don, what ya drinking this evening?
-
Sounds like the coffee rant the other morning!
-
Tex - looks outstanding on all accounts! I agree that the rotation of the fridge into line with the sink/countertop will look/flow better. You could put up a couple shelves and some coat hooks where the fridge now stands if you go that route.
Those slabs of wood look like they're really special and will make beautiful furniture when you decide what to use them for!
-
Well here is it’s permanent resting place.
(https://uploads.tapatalk-cdn.com/20190615/e0439a82197aa613b0278bfdf6aec30f.jpg)
Sent from my iPhone using Tapatalk
-
Will H fit on the bottom bunk? We know she won’t on the ladder
Sent from my iPhone using Tapatalk
-
She might. The stairs to the second floor may not hold her.
Assembled some poly wood Adirondack chairs and tables today.
(https://uploads.tapatalk-cdn.com/20190616/bd420ce92289796f4c87a2de57d0e295.jpg)
4 chairs and two tables total.
20 year warranty. We shall see
Sent from my iPhone using Tapatalk
-
Love that bunk setup.
Chairs look great also.
:doublethumbsup
-
(https://uploads.tapatalk-cdn.com/20190616/6f9644d7ac6253eb941108090732d288.jpg)
Thanks Ken.
Here’s all 4
Burning the boxes they came in. It’s 96 and fire doesn’t help
Sent from my iPhone using Tapatalk
-
Looks very inviting even at 96*
-
I am buzzed ! I can’t stand up, sitting in one of those chairs for the rest of the evening sounds like an amazing start to the weekend of Father’s Day. I hope to be in a home that’s finished as nice as yours. Well don Charles. WELL DONE SIR.
Sent from my iPhone using Tapatalk
-
Nice finished bunk bed there - top bunk will certainly NOT be hot under that chiller unit! :likebutton:
-
Nice finished bunk bed there - top bunk will certainly NOT be hot under that chiller unit! :likebutton:
that is honestly exactly where I would sleep.
-
Don, what ya drinking this evening?
OK, you got me...Baileys...
-
You sir are more than entitled to do that if you wish. Hope the home front is coming around , better to keep up than just use up.
-
Tex,
Just completely over the top in a classy way.
Double thumbs up on one really nice build.
Everything well thought out and sorted. We all have learned so much watching this come together.
(All your photos of the brown stuff reflecting the evening fire got me to enjoy some of those moments myself)
I give this whole thing the coveted and just created"TBERM" award (The best ever on Real Man).
And you are competing in some tall cotton. Salt Lake Daves home, Shawn's, well, his wife's place, well, his wife and daughter's place, JR's palace on the roof, my shed (Just kiddin' with that one), and so many more.
Well done indeed!
Oh and along with receiving the award you also get a hardy handshake and a toothy smile from you'r truly, a rare glimpse of "the Duane" and immediate pay raise of 10%, complimentary additional posting, and one get out of fired card which you can use for yourself or pass along to some Dave or Ken or J named people, or just anyone else that you may choose which, of course I will subsequently disapprove
Congratulations!
-
Don dipping into the Baileys again? :)
Sent from my iPhone using Tapatalk
-
Probably. He sure seems generous. Thanks for the encouragement Don. It started small and quickly grew into a beast. Just glad to put the final touches and call it done. For those keeping score it took the better part of two years. Not exactly setting speed records.
Daughter took the inaugural shower last night. She approves. And I realize I was right to be worried about a tankless water heater. Wife had to run her out after 30 minutes.
I have a box full of receipts. The next fun episode will be to sit and tally all that up and determine the real cost.
I may want to build it again someplace in ID.
Sent from my iPhone using Tapatalk
-
Got room on my spread...but ...
Reasons. Lol
-
Don dipping into the Baileys again? :)
Sent from my iPhone using Tapatalk
Jest a wee wittle! ;-))
Weird. I don't really drink, like almost not at all. But that Baileys someone shoved in my hand one evening in Kandahar started something. I can drink the stuff, no problem. Feel all warm and smiley all over...
-
Ken, maybe the next 150 acres over....just a 20 minute ride by SXS....
-
I dare you. We could tag team a couple more casitas.
-
So today i installed a 6ft 8 blade 10,000 CFM outdoor ceiling fan on the back porch.
Brushless DC motor.
Muuuuuuuuch better than the Mickey Mouse piece of garbage fan that was up there
(https://uploads.tapatalk-cdn.com/20190629/accf0a5c3096358288cc8a4036fe41a3.jpg)
Sent from my iPhone using Tapatalk
-
So today i installed a 6ft 8 blade 10,000 CFM outdoor ceiling fan on the back porch.
Brushless DC motor.
Muuuuuuuuch better than the Mickey Mouse piece of garbage fan that was up there
Sent from my iPhone using Tapatalk
I need that in our living room! We haven’t turned the AC on yet this year because it had been cooling off well enough at night. But I think that has finally past, last night didn’t drop below 69.
-
First time with the new rig.
(https://uploads.tapatalk-cdn.com/20190630/c636fe4d1c9d03dfd369225a898a1beb.jpg)
(https://uploads.tapatalk-cdn.com/20190630/9e071ad4ecd6d57de08014e20ade7693.jpg)
(https://uploads.tapatalk-cdn.com/20190630/35ac506ab18168b29013fe18bc3ad7ce.jpg)
(https://uploads.tapatalk-cdn.com/20190630/1ddde4273ebb4dee1004e8dccea7bb21.jpg)
(https://uploads.tapatalk-cdn.com/20190630/f1b01bbbaaade7ab3ff11356b64c68a5.jpg)
Sent from my iPhone using Tapatalk
-
Did you even put it on the grill?
-
60 seconds under the salamander on each side and then 90 seconds on top of the coals for each side. Done. Medium rare.
Steaks need to be 1-1/2 thick
Sent from my iPad using Tapatalk
-
So today i installed a 6ft 8 blade 10,000 CFM outdoor ceiling fan on the back porch.
Brushless DC motor.
Muuuuuuuuch better than the Mickey Mouse piece of garbage fan that was up there
(https://uploads.tapatalk-cdn.com/20190629/accf0a5c3096358288cc8a4036fe41a3.jpg)
Sent from my iPhone using Tapatalk
That bring back memories ;-)
-
Sitting at Sac waiting 1.5hrs till our flight and looking for food. That doesn't help
-
First time with the new rig.
(https://uploads.tapatalk-cdn.com/20190630/c636fe4d1c9d03dfd369225a898a1beb.jpg)
(https://uploads.tapatalk-cdn.com/20190630/9e071ad4ecd6d57de08014e20ade7693.jpg)
(https://uploads.tapatalk-cdn.com/20190630/35ac506ab18168b29013fe18bc3ad7ce.jpg)
(https://uploads.tapatalk-cdn.com/20190630/1ddde4273ebb4dee1004e8dccea7bb21.jpg)
(https://uploads.tapatalk-cdn.com/20190630/f1b01bbbaaade7ab3ff11356b64c68a5.jpg)
Sent from my iPhone using Tapatalk
Leave it to the TX Redneck to make an analog salamander. well done sir! or should I say, medium rare
-
Thanks Sam.
Today, I transported the second bunk bed from the shop to the casita where I assembled it.
Starting to get my shop back. This week I intend to install that Grizzly locker that’s been sitting on the shelf for 6 months.
Then I installed some can lights on the back porch since the fan I installed didn’t have lights and there were none on the porch.
That lead to all kinds of drama. Once I selected the locations, and cut the holes,of course directly above the holes were bracing that I couldn’t cut so I had to go back to the store (2 hr trip) to get low profile recessed cans.
Then I spray painted the bezels oil rubbed bronze metallic krylon and got them installed along with a dimmer switch.
much better.
(https://uploads.tapatalk-cdn.com/20190702/61fc1310ef08ac3e671a6c7312751025.jpg)
(https://uploads.tapatalk-cdn.com/20190702/26b8f95481c9310602baf2932dcd46b7.jpg)
Sent from my iPad using Tapatalk
-
Railing upstairs was just not fitting on the wood trim along the opening of the stairs, so I cut the railing and welded it back up.
Now that I figured out that welding with gas and solid wire requires a polarity change, (DOH!) my gas welding is getting better. Still need some practice..
(https://uploads.tapatalk-cdn.com/20190703/77f69f1ecfb14ea059072be1af1769a9.jpg)(https://uploads.tapatalk-cdn.com/20190703/a1cf9688879d50dfe05d4c83c4f01f4d.jpg)
Sent from my iPad using Tapatalk
-
So today, after spending an hour in a parking lot with the oldest teaching her to park between the lines, I stopped in at harbor freight and bought the kit with the small and large HVLP guns in a blow molded case for $49.
Took a bit of adjusting but got it dialed in and sprayed the railing where I welded after using some self etching primer from a can.
Then took it back upstairs and installed it with HeadLok screws (like timber lock but with a large flat head). 12 screws into the wood triumph it sits on and the subfloor and in a couple of instances, the engineered joists, and that thing would support Ken’s girlfriend..
(https://uploads.tapatalk-cdn.com/20190704/91328c3fcef751686485f31efeff8774.jpg)
Sent from my iPad using Tapatalk
-
So the finishing touches continue installed 40 inch smart TV upstairs for the girls USB duplex outlets because I’m tired of my wall warts disappearing and blackout cellular shades
Sent from my iPhone using Tapatalk
-
Then took it back upstairs and installed it with HeadLok screws (like timber lock but with a large flat head). 12 screws into the wood triumph it sits on and the subfloor and in a couple of instances, the engineered joists, and that thing would support Ken’s girlfriend..
(https://uploads.tapatalk-cdn.com/20190704/91328c3fcef751686485f31efeff8774.jpg)
Sent from my iPad using Tapatalk
Pics or we know it’s not true!!!
-
(https://uploads.tapatalk-cdn.com/20190715/2e1bcffeab4708fe5c28d72ef19df6fc.jpg)
(https://uploads.tapatalk-cdn.com/20190715/1b98e95834d780318868f9171e07958e.jpg)
Sent from my iPhone using Tapatalk
-
Really like the keystone styled casement.
-
Well now that the casita is done there are a few housekeeping items to attend to. The seacan has never been properly organized and all my reloading stuff was just kinda thrown in there. Today I started organizing and cleaning. I also took time to clean a few weapons just to make sure the other enemy (rust, as opposed to politicians) didn’t get a hold of my stuff. Started with the most expensive and working my way down. So far they all were fine from when I put them away a couple of years ago but I cleaned the bores and oiled them again.
This is the prettiest gun i own.
(https://uploads.tapatalk-cdn.com/20190721/b1f15553730fb2a3ab79175a4f0d3e01.jpg)
Weatherby MkV 460. Very few rounds down it. The bluing is like a mirror. Check out the bolt.
(https://uploads.tapatalk-cdn.com/20190721/9f76bed520d9f60d0614dd008501526a.jpg)
Thing is massive.
This thing slings a 400gn bullet at 2700fps. 115gns of powder iirc
Sent from my iPhone using Tapatalk
-
Is that a custom stock set, very nice either way. I didn’t know you guys hunted elephants down there. Even with the brake I bet you feel it take off. :likebutton:
-
Thanks Bob. That’s a laser engraved stock. It came that way from the factory. And yes. 5-6 rounds sighting it in is about all you I can handle and then some. Not sure how old it is. I bought it NIB from and estate sale. It has maybe 15 rounds down it.
Sent from my iPhone using Tapatalk
-
That has to be crazy brutal!
-
Ok back in the seacan and working through trying to remember all I forgot about reloading
(https://uploads.tapatalk-cdn.com/20190805/61849af0b83ac3ef870bcbde51df146d.jpg)
Thought I would start with some 308 brass and prep it in the single stage while I try to remember how to set up and run the progressive.
(https://uploads.tapatalk-cdn.com/20190805/763665340e25b0ad8e834e4ca32ef64f.jpg)
I really want to get a bigger tumbler but may settle on multiple smaller ones. The Thumlers Tumbler is top notch just a bit small for the amount of brass I have to process.
(https://uploads.tapatalk-cdn.com/20190805/270d99118629c4cb3f8b54377e489e80.jpg)
So after tumbling and body sizing and neck sizing I use the RCBS case mate prep center to uniform the flash hole clean the primer pocket and be burr the opening and chamfer the inside of the neck
(https://uploads.tapatalk-cdn.com/20190805/5364fea8c3887753ec84d5f9a646d2e0.jpg)
(https://uploads.tapatalk-cdn.com/20190805/5b2ce0d5b14c0776bdaba54d2f61ab75.jpg)
Sent from my iPhone using Tapatalk
-
cement mixer
-
I’ve got one. You really think that would work?
Sent from my iPad using Tapatalk
-
Sure just add media
-
I have heard of several who use the smaller plastic one for it.
-
Dish washer dedicated to brass? Couple small baskets on the bottom rack you can do large quantities in no time....?
-
Dish washer dedicated to brass? Couple small baskets on the bottom rack you can do large quantities in no time....?
Never thought of that...Darned good idea!
-
Response to Shawn's post:
Like the New York times?
Or will concrete be more uniform?
Hehe, haha
-
https://www.markvii-loading.com/loading-presses/revolution/101-1023.html
Just drop this here for some drooling....
I do think I'll get 50 lbs of media and see if I can use the cement mixer. Gonna need more brass....
-
And if you get that super press, you best be buying a few more pieces to help recycle the brass more quickly.
-
Response to Shawn's post:
Like the New York times?
Or will concrete be more uniform?
Hehe, haha
Truthfully as soon as I posted that I thought to myself “CNN”..... as in a few of those commentators should be in that mixer with some cement
-
(https://uploads.tapatalk-cdn.com/20190817/ff509ebeb4ac897f37061b8387925d2d.jpg)
Got some new Klipsch bookshelf speakers for the seacan to go with the onkyo TXH receiver and subwoofer.
Working on shelves for the amateur radio set up as well.
Brought an old desktop and upgraded to windows 10pro and it has my internal external ballistics software.
All I need is a hammock in the seacan and I can live out there.
Already have a coffee maker and mini fridge. Maybe I just need a microwave and a hammock.
Sent from my iPhone using Tapatalk
-
And after last nights teenage hormone fest I remember why I have the seacan. Solitude and I have the only key
Sent from my iPhone using Tapatalk
-
Sent from my iPhone using Tapatalk
-
That's a hard word to say, "Klipsch"
What is that, German?? Chech? Polish?
Keeps soundin' like something else
Not sure I like it...
-
'Merica
https://www.klipsch.com/founder
-
'Merica
https://www.klipsch.com/founder
Sounds like an interesting dude! BTW, he went to a rival high school of mine. LOL!
-
Got the shelves done. Got reacquainted with the Dillon 650, the powder scales and had to find the ac adapter for the electronic scale.
Loaded 5 230fmj rounds and 5 230 Hornady XTP rounds over 4.5gn of Titegroup to test.
Set up the pistol dies on a new toolhead for the 650 and sorted a batch of brass. Only found two small primer cases.
Now I’m reacquainting myself with the Oehler 35P crono getting ready to test the rounds.
(https://uploads.tapatalk-cdn.com/20190818/9311ef9710b317290b93401d27bb2d63.jpg)
(https://uploads.tapatalk-cdn.com/20190818/765f1c2d4dd04ec8265d3075ee47eea5.jpg)
Sent from my iPhone using Tapatalk
-
Charles, something to consider maybe is running a strip around front three sides of those shelves. I use 1.5 x .75 stock keeps the shelves straight over time and keeps things up on the shelf too. I normally countersink and screw it on every 12” with short drywall screws.
-
Thanks Shawn. Not my best work there but it’s 3/4 ply with brackets every 24 inches.
Should have used my big level to get the brackets exact but I was in a bit of a hurry.
You talking about. Leaving the face flush at the bottom so as to create a lip on the top to keep stuff from sliding off? Might have to think about that.
Sent from my iPhone using Tapatalk
-
Correct, you can leave it flush at bottom for a decent lip around top. Can be added at anytime too.....
Edit: if it’s plywood glue may be helpful
-
Pick up some rough sawn poplar and cut it down, good wood for not much $. Any cabinet that we paint gets made out of poplar.
Sent from my iPhone using Tapatalk
-
Something else to consider is using the chrono outside. Might be a little loud in there.
-
Something else to consider is using the chrono outside. Might be a little loud in there.
Quite.
4.5 sounds about right Charles. Maybe 4.6. Haven’t rolled those in a while.
-
Thanks Sam, you’re right 4.6 would probably be ideal. I may turn it up a bit when loading the XTP HP Rounds. 4.5 was a nice safe load averaging about 775fps. I was just a bit nervous with that Titegroup since its so compact. Using that powder thrower on the 650 aint perfectly consistent and I didnt want a hot load. theres only 8 tenths between starting and max (4.0-4.8) Figured I'd split the difference. Its a nice little load I can load a bunch of.
Loaded about 200 rounds. Will pump out another 800 next weekend. Time to get some more ammo cans...
-
(https://uploads.tapatalk-cdn.com/20190818/9c68f86d1c1f8f1e892ee9da7e1d0faf.jpg)(https://uploads.tapatalk-cdn.com/20190818/55d0aa7919a9d37e10288c071e8f587b.jpg)
Sent from my iPhone using Tapatalk
-
The way to read the chrono output is:
Each shot is logged on a line
first number is the proof screen velocity (the 35p measures each shot twice and compares the two to make sure the data is as accurate as possible) You can see on the first shot on the right ticket it only measured the proof and errored on the primary, thus the asterisk which means it was not included in the summary at the bottom.
the middle is the shot number
the last is the measured velocity used for the calculations
then below the dashed line is the summary of the string of shots
fastest
slowest
extreme spread
average
standard deviation
A little overkill for pistol, but for precision rifle work, it really helps in load development
-
In addition to ordering 5000 rounds of once fired 45ACP, I also found that The Ready Store was running a sale on some #10 cans of meat products.
So I picked up 6 cans of freeze dried meat.
https://www.thereadystore.com/
-
In addition to ordering 5000 rounds of once fired 45ACP, I also found that The Ready Store was running a sale on some #10 cans of meat products.
So I picked up 6 cans of freeze dried meat.
https://www.thereadystore.com/
I just hate that stuff
Its one of the few things that looks the same coming out as it did going in!
-
You are talking about the brass right
-
Don, I have to tell you the freeze dried stuff is incredible. I've used it quite often on camping trips and the kids love the pasta with meat sauce. My little reactor stove heats water in 3 minutes and then we pour it in the pouch and voila! dinner in less than 5 minutes.
I looked at the home freeze driers but decided against it just because of time constraints.
I have a ton of MREs and those are hit and miss , but the tortellini are awesome
-
TRN, make sure you keep an eye on those mre's...they do have an expiration date.
and to keep them good for as long as possible, keep they in a temp controlled area
-
Roger that Nate. 5-7 at 72 degrees. I eat them occcasionally but they are good well beyond that date. There are documented stories of people eating 20-30 year old MREs.
I don’t buy the meals anymore. I buy the entrees and heaters separately
Sent from my iPhone using Tapatalk
-
Freeze dried foods have come a long ways. It really depends on the brand you use. We use them regularly in our house, for dinners and such. The freeze dried onions get used at least once a week, we love them!
-
Good friend of mine was a SeaBee in the early 80’s and swears they ate Vietnam era rations......
-
Finished the 1000 rounds of 45 I was loading. Then re oriented the flag in the frame to display it vertical and hung it in the sea can.
I guess it’s finished since I’m decorating. (https://uploads.tapatalk-cdn.com/20190901/7f30c6d02bea01fbad5ea2ee2c931845.jpg)
(https://uploads.tapatalk-cdn.com/20190901/db6678514523dd7fdf1c4d5e8419ddeb.jpg)
Sent from my iPhone using Tapatalk
-
^^^ I like that!
-
So today I cleared a little piece of land behind the pond for a new pistol range.
Now I can move and shoot and take cover.
(https://uploads.tapatalk-cdn.com/20190901/c0aea1f6284b575282ae34e7c0f97267.jpg)
Sent from my iPhone using Tapatalk
-
What kind of back stop do you have? Are you shooting downhill so the ground is your impact point or is it and extended section of woods behind you? Just curious as this is something I need to complete as well.
Sent from my iPhone using Tapatalk
-
Its an extended piece of woods but I’m down in the valley of a creek and the other side of the creek behind there, rises about 40 feet total so its a backstop of sorts
Sent from my iPad using Tapatalk
-
(https://uploads.tapatalk-cdn.com/20190902/9c61cc9667e5818fa7586815f9c5ad33.jpg)
Prepping for some fun tomorrow.
And yes I know #7 is missing. It’s in the safe with jhp loaded in it.
Sent from my iPhone using Tapatalk
-
Another 1000 rounds loaded today.
I’ll make seating depth adjustments and run 500 Hornady XTP JHP 230gn
(https://uploads.tapatalk-cdn.com/20190907/6eb731201b250bb8e3dcf6de43aa9a49.jpg)
Sent from my iPhone using Tapatalk
-
So today I finished my compressor condenser.
Transmission cooler with the output from the compressor head to the top then out the bottom into an automatic water separator and then into the tank. Will make a wall mounted copper tube condenser to get additional moisture out.
(https://uploads.tapatalk-cdn.com/20190921/c227dd15f48b30b537c04037256ef5a6.jpg)
Sent from my iPhone using Tapatalk
-
Interesting concept Charles
-
Stole it from utube. Dude demonstrates the improvement in temp and moisture. My media blast cabinet has never worked right because of the moisture. (Easily 70+% humidity a good bit of the time )
Sent from my iPhone using Tapatalk
-
Only in TX, right?
Not a bad idea at all though. Just AC units for the pressure?
-
Great idea there Tex!
So, air primarily for the blast cabinet then?
BTW, mine has never worked correctly either
I get a lot of water out of that monster V4 compressor of mine
-
Check out youtube and there are several videos with part numbers. I used a transmission cooler and an auto drain. I plan to add a copper pipe manifold on the wall to further cool the air.
-
Well with the shelter in place and us spending a lot of time here I decided it was time to put up a mailbox.
Bought a mailbox and then scrounged some pipe and C purlin and voila
(https://uploads.tapatalk-cdn.com/20200328/485cfd988baf3a018ae8eea4c26e0984.jpg)
(https://uploads.tapatalk-cdn.com/20200328/82a24a0ed162c7614f718eb367292c8f.jpg)
(https://uploads.tapatalk-cdn.com/20200328/8a9751ae1326f02e46c2eb4c63be6842.jpg)
Used the auger on the tractor to dig the hole and got it in the ground and then mounted the mailbox. Will take finished pics later after the rain
Sent from my iPhone using Tapatalk
-
Proper looking country mail box stand
-
And done. Just need to get my property address on it and some reflective tape on the pole
(https://uploads.tapatalk-cdn.com/20200329/0949acce4992c14550398a914a8c281b.jpg)
Sent from my iPhone using Tapatalk
-
Looks legit!
-
(https://uploads.tapatalk-cdn.com/20200330/d65dc023bde8210e7abab18aba9c45d0.jpg)
Installed a new gate up at the far side of the front where the cleared land is. This is how we’ll get loads of materials and equipment in when we start large scale gardening. First up will be fruit trees and berry bushes along the fence. Then I’m investigating square foot gardening and other high density high performing methods. Not sure which way I’ll go.
Will get more pics tomorrow. Got the second post in and the H. brace made. Fence stretcher is a piece of garbage. The metal on the cams are too soft and they won’t grip. May have to use come along to get it right.
Garden is coming along nicely.
(https://uploads.tapatalk-cdn.com/20200330/5ca733d94d33f2cba83b11b322dc0d88.jpg)
Lots of tomatoes, peppers,spinach, chard, purple cabbage, cauliflower, cucumbers and yellow squash.
Sent from my iPhone using Tapatalk
-
I thought a come along was “the fence stretcher”? :huh:
-
(https://uploads.tapatalk-cdn.com/20200330/83dc6e581780e56bd7fbc8a50999b5f0.jpg)
Sent from my iPhone using Tapatalk
-
(https://uploads.tapatalk-cdn.com/20200330/83dc6e581780e56bd7fbc8a50999b5f0.jpg)
Sent from my iPhone using Tapatalk
Ya, copy was being a smart butt. We always used a come along......
-
Finished the gate today.
Need to adjust the lowest wire strand
(https://uploads.tapatalk-cdn.com/20200331/84aa9ad17c7c7bbe60bbd6b03aee4f88.jpg)
Sent from my iPhone using Tapatalk
-
Good work!
So green already down there.
-
My office for the next while.
No green in sight here for a while.
(https://uploads.tapatalk-cdn.com/20200331/d0a5f5168b00a14e63781d6fd009771a.jpg)
Oh. Brisket in the smoker for dinner tonight.
Sent from my iPhone using Tapatalk
-
Lol. It was 90 here last week.
Today I built a package drop for the Amazon fairy.
Still need to clar
The outside in R panel and put some treated feet on it
(https://uploads.tapatalk-cdn.com/20200401/992d7360e1df6913fde87d7ed97dab05.jpg)
It’s 36x24x36
Sent from my iPhone using Tapatalk
-
(https://uploads.tapatalk-cdn.com/20200401/27eb29c69b9001173bf3fc1cdc7f89bb.jpg)
The couch ornament decided to move to the open kitchen sink window
Sent from my iPhone using Tapatalk
-
How’s that HF blast cabinet work for ya Tex? I think you said you had to make some tweaks to it? I’m thinking of picking one up to finish up some projects.
-
Yeah. Go with a TP gun and it works fun. Bigger is better on the compressor.
Sent from my iPhone using Tapatalk
-
TP is Tacoma Products right? I’ve seen them mentioned various times in conjunction with the HF cabinet.
Never mind, it’s Tacoma Company. TP is something else...? Not the white stuff everyone thinks they need to buy right now.
-
And this is why my shop never gets clean. In the process of cleaning I find some cedar that was in the way and it winds up being a little project that distracts me.
(https://uploads.tapatalk-cdn.com/20200404/602dec12f3b3da40ec2835c7d9c0ee6a.jpg)
Sent from my iPhone using Tapatalk
-
Ok so added some additional security cameras and power washed the back porch and the casita and rebuilt an 18v dewalt nicad
(https://uploads.tapatalk-cdn.com/20200413/bc1528f497f653836c50c3eebb22f35f.jpg)
Sent from my iPad using Tapatalk(https://uploads.tapatalk-cdn.com/20200413/5f870a58d86931b93836bbd4bb7228ac.jpg)
(https://uploads.tapatalk-cdn.com/20200413/dda0f3a56a55989daea9b2a591d58c64.jpg)
-
Is that auger you get from TSC? Been looking but I have more rocks I bet.
Nice box and far enough off the road for drive bys.
-
Yeah TSC special. I have the 10 inch auger. Need the 12 Want an 18 when I go to do the cantilevered sliding gate at the entrance.
Amazing. Amazon will find me long before the FBI does.....within 2 days I got brown Santa dropping packages...
Sent from my iPad using Tapatalk
-
Yeah TSC special. I have the 10 inch auger. Need the 12 Want an 18 when I go to do the cantilevered sliding gate at the entrance.
Amazing. Amazon will find me long before the FBI does.....within 2 days I got brown Santa dropping packages...
Sent from my iPad using Tapatalk
Of course the reality is that if the FBI wants to find me they will and the CIA will hack all my internet connected devices and the spec ops crew will use all the IR from the cameras to sneak up on me with the NODs. Nah, they’ll just drone in a missile and call it done.
Sent from my iPad using Tapatalk
-
So I had mothballed the ice maker from the days when I had the 5er. Since we’ve been quarantined I dug it out and it’s been awesome. I’ve used it to make ice to keep the Yeti topped off with ice and cold drinks cold on the back porch. (https://uploads.tapatalk-cdn.com/20200413/2b7c73caa50137bff51293d9acc18ff6.jpg)
Sent from my iPad using Tapatalk
-
Source on batteries for the Dewalt rebuilds?
Yes the camper ice special.
Ours still kicking as well. Been without camper for several years now.
It racks ice all summer for us.
-
Sam amazon as always. Sold in 15 packs. Perfect for rebuilding an 18v batter. Just search Sub C NiCad. These were 3400mah
Sent from my iPhone using Tapatalk
-
Wouldn’t it be more efficient in the long run to use the adapter to a lithium ion?
DEWALT 18v to 20v Adapter - Bare (DCA1820) https://www.amazon.com/dp/B016K1UD0E/ref=cm_sw_r_cp_api_i_DntMEbVH5W1JV
-
Put Nichol metal hydride in there. Usually more capacity and can use the same charger. What we used in models before lipos hit the sceen.
-
Just caught up on your thread Charles, everything looks great! Really top notch work.
-
Thanks Kyle. Ryan the adaptor is more than what I spent to rebuild this one but eventually I may go that route. JR, nimh I’ll have to look at the form factor since the spacing is really tight in the case
Sent from my iPad using Tapatalk
-
A Kyle sighting!!
-
Same size batteries, just better ratings.
-
Ok finally did something with the pile of rocks that was the fire pit before we had all the pool and fire pit built.
Just had some paver base laying around. Will water it in and then get some smaller decomposed granite to finish
(https://uploads.tapatalk-cdn.com/20200427/cc50b0e4197313ee7dfa5e900aa611a3.jpg)
(https://uploads.tapatalk-cdn.com/20200427/a9a430c7b383c5458d73a0175e07ac8a.jpg)
(https://uploads.tapatalk-cdn.com/20200427/c259842354bf6ad109570b187d85e781.jpg)
Sent from my iPhone using Tapatalk
-
Nice,,,,
-
Nice pattern Red
What are you using to lock them in place? Sand? Crushed stone? Something else?
-
I had some paver base laying around but will finish with fine decomposed granite.
Sent from my iPhone using Tapatalk
-
Very nice Charles, bet you will be glad when you are finished and not walking in dirt or mud to get wood for the fire.
-
Looks great to me. They have that glue concrete type sand. I have used that with pavers. Worked good from my experience
Sent from my iPhone using Tapatalk
-
I’ll look into that Dave. I’ll probably just stick with crushed granite since I didn’t plate compact. These will probably settle some and I’ll need to make spot repairs I’m sure.
Sent from my iPad using Tapatalk
-
What Dave is talking about is called polymeric sand. It locks everything in place once it gets wet.
-
Looks great to me. They have that glue concrete type sand. I have used that with pavers. Worked good from my experience
Sent from my iPhone using Tapatalk
I used the same on my patio, held up great for years now. My pavers are pretty tight though.
-
Just for kicks I added a WiFi access point at the pond/garden. I have a shielded direct burial cat 6 cable already out there. The run is right at the max of about 330 ft. for POE. Works great. Good signal. Will probably add a 3 port switch and the. Piggyback a camera too.
(https://uploads.tapatalk-cdn.com/20200510/412799b47a88ae3d131d507b979f57d6.jpg)
Sent from my iPhone using Tapatalk
-
And enjoying what is likely to be the last fire of the season. Been a cool spring. Gonna get to the upper 40s tonight. Note the big D welding crocs(https://uploads.tapatalk-cdn.com/20200510/71d00b266ffd4c9920d532a8fe23baeb.jpg)
Sent from my iPad using Tapatalk
-
Just for kicks I added a WiFi access point at the pond/garden. I have a shielded direct burial cat 6 cable already out there. The run is right at the max of about 330 ft. for POE. Works great. Good signal. Will probably add a 3 port switch and the. Piggyback a camera too.
(https://uploads.tapatalk-cdn.com/20200510/412799b47a88ae3d131d507b979f57d6.jpg)
Sent from my iPhone using Tapatalk
Someone's gonna think you're a spook!
-
Well with all the IR Illumination real spooks should be able to walk right up like it’s daylight. Or a laser designator would find it an easy target.
Sent from my iPhone using Tapatalk
-
Hmm. Seems my last post is a little different than I remember. I’m any event.
So time to build the outdoor kitchen starting with the structure.
I debated the engineering because there is no sheer wall to create rigidity. Four posts and a roof. Like a table of sorts.
14x24 structure with one post per corner. The attachment of the post to the corner is key to rigidity. So the traditional post attachments won’t create any real structure. 4x6 nailed into a Simpson post base is not rigid.
So I decided I’d use steel columns with a base plate bolted with epoxied all thread into the concrete. The columns will have beam pockets welded out of 10ga with nail holes to fasten.
I ordered prefab base plates that came in today. Gonna weld these on and then start working on the pockets
(https://uploads.tapatalk-cdn.com/20200602/42ec22e026fc4c20d4d5b49b5f6dda47.jpg)
Sent from my iPhone using Tapatalk
-
Wish my build was this far along.
Wonder what Dons farm looks like??
-
Wish my build was this far along.
Wonder what Dons farm looks like??
I’m sure antifa has taken over by now.
Sent from my iPhone using Tapatalk
-
Plus he has no Dozer to chase em with. THAT would be fun!!!!
-
He would smash his chainsaw and camera first anyway
Sent from my iPhone using Tapatalk
-
Tag the protesters with orange, GTG.
OK Charles, we'll stop the DOT for now,,,,,,,,,,,,,,,,,
-
Ok boys. Here it is at the moment
Got the base plates down. Concrete drilled and 3/4 stainless all thread cut. Used the diamond wheel to level the stone so the plate sits flat and level. Just need to clean the holes and epoxy.
Dave this May answer your question. Here is the first column. 10 ga pockets 13-1/2x3-1/2 for a LVL beam 3-1/2x14
(https://uploads.tapatalk-cdn.com/20200613/e2fa86f1e8ef11e33c42986df26ec85c.jpg)
(https://uploads.tapatalk-cdn.com/20200613/a8efa5be260da4566e076bbb2b701817.jpg)
I’ll stand them up and brace them and then weld them to the base plates to make sure I get them plumb
Sent from my iPhone using Tapatalk
-
Charles, turn up your heat and/or slow down a little on your welds. Beads look a bit stringy atm, ideally it should be a flat 45 degree fillet laid in that corner.
-
Thanks Shawn. Heat is all the way up. I may have too much wire speed.
Sent from my iPad using Tapatalk
-
Thanks Shawn. Heat is all the way up. I may have too much wire speed.
Sent from my iPad using Tapatalk
:likebutton:
-
Watching :)
Sent from my iPhone using Tapatalk
-
Thanks Shawn. Heat is all the way up. I may have too much wire speed.
Sent from my iPad using Tapatalk
:likebutton:
So I was getting good penetration on next to the hottest but wanted to put more heat on the 1/4 inch tube. Cheated in that direction a bit and let the rest of the heat onto the 10ga. Plus I think the weld you are looking at is on top of the adjoining weld in the other long plate. In any event the most important welds are the ones on the small bottom plate where the beam will rest. I fully welded both inside and outside seams on those..
Sent from my iPad using Tapatalk
-
I don’t think it’s going anywhere. Just constructive criticism, I know you’re anal about quality of your work so just trying to help as all. If you would have slowed up how fast you were moving the gun forward it probably would have been perfect.
-
Where is your flops and wood table ?
Sent from my iPhone using Tapatalk
-
I don’t think it’s going anywhere. Just constructive criticism, I know you’re anal about quality of your work so just trying to help as all. If you would have slowed up how fast you were moving the gun forward it probably would have been perfect.
Greatly appreciate the feedback. I’m not an expert welder and I want to get better.
Dave, I was wearing short and tennis shoes if that helps...
Sent from my iPad using Tapatalk
-
Flip flops are not considered appropriate welding work wear? :huh:
-
I don’t think it’s going anywhere. Just constructive criticism, I know you’re anal about quality of your work so just trying to help as all. If you would have slowed up how fast you were moving the gun forward it probably would have been perfect.
Greatly appreciate the feedback. I’m not an expert welder and I want to get better.
Dave, I was wearing short and tennis shoes if that helps...
Sent from my iPad using Tapatalk
Flip flops are not considered appropriate welding work wear? :huh:
At least hes not wearing mandals with socks like don and his cardboard welding tables
-
You have a lot of weld length so I am sure it is not going any where. Were you pushing or pulling and what type of pattern were you using? I'm guessing most of those welds will be somewhat exposed and visible. Just wanting to help make them as pretty as possible. The easiest way to make the best looking weld for me is to set my piece up so I am welding a bit down hill and then pulling the weld.
-
Mostly pulling and a little wobble like writing a cursive e. Mostly flat horizontal welds. Going to work on the next column and will play with wire speed a bit. None of the welds will be exposed. It will all be covered with treated or hardi when finished.
Part of the problem is likely welding outdoors with a good breeze. May pull it inside on saw horses.
Sent from my iPhone using Tapatalk
-
Charles, only problem outdoors gas welding is porosity “if” wind blows shielding gas away. I saw no pics of any. There will be small pin holes in the welds. To help combat this try to push the gun forward. By definition pulling away the gun from the direction the gas is blowing can cause issues.
Bear mentioned pulling downhill, gravity helps in this scenario. It helps move the weld puddle in direction you want to go and gas is heavier than air so the shield gas tends to drop back around weld. So there is some science to back up his statement.
I’d try to keep settings the same and just move slower, watch your puddle not the flash of light and let it fill in a bit more by moving gun a tad slower.
-
What welder do you have? Dial settings
I like pulling my welds too. Maybe a little pre heat will help?
-
Lincoln pro mig 180. Today was better. Need to clean the rollers and adjust a bit. It still surges occasionally
(https://uploads.tapatalk-cdn.com/20200614/61cff7b04741c63d4c2336a36689d140.jpg)
. Moved indoors today as well.
(https://uploads.tapatalk-cdn.com/20200614/47e7ebd230b8b4bf3ac4f324221c72e3.jpg)
Sent from my iPhone using Tapatalk
-
By my calculations each pocket will have less than 400 lbs on it so I think it’s going to be fine.
Shawn I got a bunch of porosity in one weld today as though I had forgotten to turn on the gas. Turns out the tip was caked with spatter and once I cleaned it I was GTG.
JR I may preheat the column base plates a little when it comes time to weld the columns. Plates are 1/2 inch and columns are 1/4 and I’ll run .035 flux core for a little better penetration.
The plan is to stand up the columns and brace them plumb and tack them in place. And then set the LVL and nail those in place and then finish welding the plates. Going with 3-1/2x14 LVL/Parallam. Way overkill me thinks but I don’t want any sag in a 22ft span.
Sent from my iPhone using Tapatalk
-
I would saw you ae fine, not bad welds by any means.
Watched a youtube where the guy lifted like 10k with a 1in weld on 1/4 plate just to see what it would hold. Never actually broke it. (carmarata)
-
Well. Epoxied the stainless all thread this morning. Stood up the first column and started welding it in.
Forgot how messy flux cored wire is
(https://uploads.tapatalk-cdn.com/20200620/f15dd36853c5689f41d1c064a7adfbf2.jpg)
Sent from my iPhone using Tapatalk
-
Maybe stick weld using 7018? Flux just rolls off.
-
Yeah I’d like to get a 250-300 amp stick welder for those special occasions when it’s more about penetration that purdy
Sent from my iPhone using Tapatalk
-
Did you put bolts on the thread first then you can raise post off the Crete and level the post with the turn of a nut. Then put nuts on the top to hold it
That how they do street lights
Sent from my iPhone using Tapatalk
-
Dave you’re fired. I thought of that after I cut the all thread but I’ve got everything level so far.
Two up. Two to go
(https://uploads.tapatalk-cdn.com/20200620/963f82c23d5af182e20b647718e7dd17.jpg)
Will get the lumber this week
Sent from my iPhone using Tapatalk
-
Lol that doesn’t work!!!
You can use washers as shims too
Sent from my iPhone using Tapatalk
-
I think you mean you have them plumb ;)
-
I think you mean you have them plumb ;)
Correct.
Sent from my iPhone using Tapatalk
-
Maybe too late to mention but I usually weld multiple passes on uprights like that at least 3. There can be crazy leverage on those plates.
-
Not too late. That was the plan. I laid down a root pass and will back it up with one on each side.
All four up and pretty plumb all around.
(https://uploads.tapatalk-cdn.com/20200621/ce7615b9719d8fa6aa08adf4525be2d1.jpg)
Hope to pickup lumber this week and get framing started next weekend
Sent from my iPhone using Tapatalk
-
What do you have for a footing under the pad?
-
Nothing. 5 inch slab with rebar 16oc. Should be plenty for my little cover.
Sent from my iPhone using Tapatalk
-
I might reinforce the corners with a little more cement. Just for a wider print since its on the corner. Lots of weight there and it will never show.
-
I agree with Charles, shouldn’t go anywhere and won’t weight much. Should be gtg as is, no snow load etc.
-
Entire weight of the structure is under 4000 so under 1000 per column.
Sent from my iPhone using Tapatalk
-
Not so much the weight, just thinking about when the wind blows just a little like it does there.
-
I’m ok with it on the pad as is. Five inch is a good bit of concrete, I’d put a car lift on it and be ok
Sent from my iPhone using Tapatalk
-
I’m ok with it on the pad as is. Five inch is a good bit of concrete, I’d put a car lift on it and be ok
Sent from my iPhone using Tapatalk
So would I, but not on the corners. Up to TRN, just giving our opinions.
-
5 inch slab shouldn't go anywhere.
Sent from my Pixel 2 XL using Tapatalk
-
It's probably too late to change anyway
-
It's probably too late to change anyway
100% agree. No pouring a footing under it really easy now anyway
Sent from my iPhone using Tapatalk
-
And after the cracks appear it will be too late anyway
-
If that lad is like anything else TRN does, it’s probably over engineered even beyond what he told us. I don’t think he’ll run into any issues, like someone said, there is no snow load, rain will run off and not add any load, and I really think 4000 pounds total load for his roof is overestimating. Heck, Don said his trailer only weighs about 250 pounds or something, right? ;)
Sent from my iPhone using Tapatalk
-
Er, were is Don?
-
I have not seen him or anything
Sent from my iPhone using Tapatalk
-
Last I seen on a island from a post from the boss lady he was tagged in. So fishing?
Sent from my iPhone using Tapatalk
Welp, there goes this years pay increase..... :tongue:
-
Playing in the mall mulch?
-
Harvested a few tomatoes this morning. Think I’m going to jar some salsa.
(https://uploads.tapatalk-cdn.com/20200625/ba8b8de75d98285d869e582f9d243706.jpg)
Sent from my iPhone using Tapatalk
-
If its really hot, I'll like a jar? :rolleyes:
-
Dang. I just planted last weekend the peppers and tomatoes, and tonight cabbage and Brussels sprouts.
-
Well first beam in
(https://uploads.tapatalk-cdn.com/20200627/a3e7609b8b53294a6d60ca7ec001c658.jpg)
Practicing with the short side. Then the long ones
(https://uploads.tapatalk-cdn.com/20200627/ff2fa65edf387b6ae77ee03aeea03971.jpg)
(https://uploads.tapatalk-cdn.com/20200627/2144b3bd50424587a1298795d8a61fed.jpg)
3-1/2x14 PSL. Stupid strong. Stupid heavy.
Sent from my iPhone using Tapatalk
-
:likebutton: Those are awesome, used two of them when I built loft in shop. Good deal on front end loader, I had 16’ers and they brought the suck putting up.
-
This one is 23ft
(https://uploads.tapatalk-cdn.com/20200627/e009b2f2833272f67ab3a5863095422d.jpg)
(https://uploads.tapatalk-cdn.com/20200627/13c5286d82255f80cb884d082a611d1b.jpg)
It’s barely y’all enough at full extension. The crappy part is standing the beam upright from one end while it’s laying on its side. All while standing on an 8ft ladder. Don’t want to over rotate and have it go off the front side.
Anyway. Two down
Sent from my iPhone using Tapatalk
-
That sure beats putting them up on your shoulder!! Looks good !
Sent from my iPhone using Tapatalk
-
Thanks Dave. And no kidding. The long one is 345lb so one end is 175. I made a little dolly to transport them to the spot and then i put them on the FEL.
(https://uploads.tapatalk-cdn.com/20200627/c0dd93a97bbb9e6e4500d1a7abd7e2cf.jpg)
(https://uploads.tapatalk-cdn.com/20200627/c357ef36e6bf1f3e766f10b576a6197f.jpg)
Sent from my iPad using Tapatalk
-
Charles, I think you need a vacation and I will need a shop built. You could use one of the spare bedrooms while staying and building the shop. :cool: Just kidding I think, Your place looks so nice with all the improvements you have made
-
Bob. That may not be a bad idea. I’d love to spend some time in the PACNW one day. Let’s get Nate to come and we can build and cook together.
Sent from my iPad using Tapatalk
-
Well now, we could have a real barn raising if and when we ever close this thing. When I find a place to put a shop and get the county to agree that is.
-
Got a 22' in the upstairs garage. Used an A frame and 12v winch.
-
Bob, I work for food......
Get Tate & Nate to come work the kitchen and I’m there!
-
Bob, I work for food......
Get Tate & Nate to come work the kitchen and I’m there!
Yep, those 2 should get a room, er restaurant together,,,,,,,,,
-
Bob. That may not be a bad idea. I’d love to spend some time in the PACNW one day. Let’s get Nate to come and we can build and cook together.
Sent from my iPad using Tapatalk
I can build but not much of a cook, count me in.
-
Wait wait wait, I don't even own the place yet. I would hate to start planning a barn raising not even knowing where the barn will be. I sure do appreciate the thoughts however.
-
I'm in if any one of those guys are cooking.
-
Did somebody say somethin' bout some free food?
-
Me and Ken will come up two days later and tell you guy it’s built wrong lol Don can come and try and put a 12v in it
Sent from my iPhone using Tapatalk
-
11 hour day
(https://uploads.tapatalk-cdn.com/20200628/5586ad0e11c43384723eff3ad7132c1f.jpg)
Sent from my iPhone using Tapatalk
-
Is there any slope to that roof?
Sent from my iPhone using Tapatalk
-
Those are the joists. Ridge beam goes up next with rafters 6:12 gable on the short sides
(https://uploads.tapatalk-cdn.com/20200628/12ce3f817a1ae22d3d6b02918ee7ae14.jpg)
Sent from my iPhone using Tapatalk
-
I guess you could have gone with a single pitch roof and be ready for sheeting. Oops
Sent from my iPhone using Tapatalk
-
Nope. Trying to keep the architectural style similar to the other structures.
95 and humid as all get out today. Despite using powder I have a bad case of monkey butt.
Sent from my iPhone using Tapatalk
-
11 hours is only about 5 more than you should have done. Looks nice Charles
-
Leave it to you Charles to overbuild a ramada. Use it to winch and engine swap a Cummins while also being tornado proof.
Looks great per normal.
-
Dang Charles, did we really need to know that?
Was about the same up at the ridge, but crazy windy. I looked like a dust bowl after clearing brush.
-
Nope. Trying to keep the architectural style similar to the other structures.
95 and humid as all get out today. Despite using powder I have a bad case of monkey butt.
Sent from my iPhone using Tapatalk
TMI alert...One time I had a real bad case of that. I resorted to using diaper rash cream. Now I keep a tube in my pack. Works wonders.
-
Harvested tomatoes again this morning. It’s getting out of control.
Harvested about 25 lbs to go with the 15 pounds I already had on the counter.
Time to break out the pressure canner and jars. 18 quarts of tomatoes up.
(https://uploads.tapatalk-cdn.com/20200630/97fa4b491e1f0a2e55159b0ceabec94c.jpg)
(https://uploads.tapatalk-cdn.com/20200630/e2e6e4470a7d2f9939e460b62b8d8ca8.jpg)
Sent from my iPad using Tapatalk
-
"It’s barely y’all enough at full extension." << Best Freudian slip EVER
-
If your still making salsa, its my birthday,,,,,,,,,,,,
-
Happy birthday JR. Just canned tomatoes yesterday will get on to salsa here shortly. Happy to send you some.
Sent from my iPad using Tapatalk
-
That would be great to get some real stuff.
Thx
-
So when you say spicy, you mean CA spicy or Tx spicy? Just checking.
Sent from my iPad using Tapatalk
-
Tx spicy. I like it to clear my head.
-
If your still making salsa, its my birthday,,,,,,,,,,,,
Happy Birthday JR!
Sent from my iPad using Tapatalk
-
Happy belated JR!
-
Thx guys,,,,,,,,,,
-
Time to start getting some rafters up
@bigdave think it has slope now?
(https://uploads.tapatalk-cdn.com/20200703/77382966ff6a5a1a9349255861cf1c35.jpg)
Sent from my iPhone using Tapatalk
-
It looks like it could when your done now.
Sent from my iPhone using Tapatalk
-
;-)
Here’s where I left it today. All the rafters are cut and a little more than half hung. Ran out of Simpson rafters hangers so I hope the rest I ordered are in when I go to HD tomorrow.
(https://uploads.tapatalk-cdn.com/20200703/69c921e93ba5e3555e16175d69724087.jpg)
Sent from my iPhone using Tapatalk
-
:likebutton:
Looks good, make a great shed for the tractor... :popcorn:
-
Better be careful. You add any more wood and it'll weigh as much as Don's camp trailer.
-
And you said the footings were enough?
Looks solid, just a little overkill,,,,,,,,,,,oh, Texas.
-
Rafters all up. Making sure they are all square to the ridge beam and nailing them in. Then hurrciane straps on each tail and then snap a line and cut them off at 14.75 inches to get the overhang correct.
Then I’ll start the lookout rafter and barge rafter construction on the gable ends. Then 23/32 sheathing. Then order the R panel roofing to match the houses. (https://uploads.tapatalk-cdn.com/20200705/4ee9dab829bf283d8d8961538b065408.jpg)
Sent from my iPad using Tapatalk
-
Here’s where I left it for the week. Need to do the lookout rafters for the other end and then then on to sheathing
(https://uploads.tapatalk-cdn.com/20200705/fd2e3cc1e3b0be58327182b04d31e5af.jpg)
Sent from my iPhone using Tapatalk
-
Looks good!!
Sent from my iPhone using Tapatalk
-
Surprised you didn’t spot the glaring mistake??
I forgot to trim the ridge beam. Will be doing some surgery with the chain saw.
Sent from my iPhone using Tapatalk
-
Add some sides and you have a garage! Looks stout.
What kubby is that back there?
-
I guess not knowing what trim your putting on, people leave them open all the time
Sent from my iPhone using Tapatalk
-
Add some sides and you have a garage! Looks stout.
What kubby is that back there?
L3800DT 2012. No emissions
Sent from my iPhone using Tapatalk
-
Mines a 2012 also, no crud.
-
Better be careful. You add any more wood and it'll weigh as much as Don's camp trailer.
Careful! I'm startin' to watch you (Again...)
;-))
-
TRN, we best be careful. Both of these are orange and you know what Don does to orange things.
-
TRN, we best be careful. Both of these are orange and you know what Don does to orange things.
You're good
I own one myself. Take me years to chew it up before I go lookin'
-
Finished the lookout rafters and trimmed all the rafter tails and fixed the ridge beam mistake. Started on sheathing.
It was 102 with heat index 115 today. Slow going
(https://uploads.tapatalk-cdn.com/20200712/b9199286980bf698663b58ea0c0c579f.jpg)
Sent from my iPhone using Tapatalk
-
Good looking work!
-
Cant wait to get mine started. Just cleaned this weekend but it was even hotter.
-
Pretty much finished sheathing.
Did my annual bone density test by falling off the ladder. Nothing broke. Just a bruised hip and ego.
Have to call it quits today. Gotta go start the “cleanse”. Bi annual colonoscopy tomorrow. Youse over 50 guys don’t put it off. It can save your life
(https://uploads.tapatalk-cdn.com/20200712/52d6314544b998c566c256bd3c8c43b2.jpg)
(https://uploads.tapatalk-cdn.com/20200712/9e605c1d6c0eb4310671b035bf9e5bd3.jpg)
Sent from my iPhone using Tapatalk
-
Bi annual? Sounds like you're starting to enjoy it. I thought it was supposed to be bi century?
-
Yeah, I was told every 2 years also.
-
Bi-annual can mean twice a year or every two years.
-
I am here to tell you it is very important 3 years free and hope the ultrasound shows growth on kidney is a cyst and not a tumor
-
I have Crohn’s (IBD) so I have to get them every 2 instead of every 5.
Sent from my iPad using Tapatalk
-
Tractor shed is looking good! :likebutton:
-
I have Crohn’s (IBD) so I have to get them every 2 instead of every 5.
Sent from my iPad using Tapatalk
So every 2 years. I thought you meant twice a year.
-
God no. Every 2 years is way to often for me. The prep is worse than the procedure especially now that they put you out with propofol.
It’s like playing Michael Jackson for a few hours. (The propofol part)
Sent from my iPhone using Tapatalk
-
Yeah had it done last year and I agree, the prep is terrible, and the hangover afterwards is worse than what happens after a night of vodka, whiskey, and margaritas mixed together.
-
TRN, do you want to be awake? Never had an issue like hangovers though, but trying not to be an expert
-
I’ve had probably 15-20 in my life. The propofol is the bees knees. I’m already done back at home and had two breakfast tacos.
They say not to drive for a day. And make you have someone pick you up. My wife is not an early riser. I drive myself and then she picks me up and drives me around the block and drops me off at my truck. I’m GTG once I have coffee and breakfast
Sent from my iPhone using Tapatalk
-
Mine is scheduled, and this squirrel sure ran some distance!
-
Charles, glad it is over and hopefully good results.
-
All good Bob. Thanks.
Sent from my iPhone using Tapatalk
-
(https://uploads.tapatalk-cdn.com/20200718/5f9b53b0b8dc2402d612fd55b7eb3175.jpg)
Dried in. Just in time for a summer shower about 2 hours after I finished. Ordered metal roof, trim, gutters, downspouts and a low profile 10 ft section of roof vent.
Headed to the lake tomorrow. Rented a house and boat and gonna try and relax for a few days.
Sent from my iPhone using Tapatalk
-
Did you wire for a fan in the top as either an exhaust fan or just ceiling fan?
Looks really nice Charles
Sent from my iPhone using Tapatalk
-
Impressive. A bunch of work for one man.
Enjoy your time off.
-
Thanks guys. Dave wiring is coming. Soffit and facia and metal roof first. I ran 50 amp service to slab which will be plenty for all I have to run. Standby for details ;-)
Sent from my iPhone using Tapatalk
-
Some good looking can lights could be nice on the inside of the area and maybe some nice porch lights also. (https://uploads.tapatalk-cdn.com/20200719/f326dbf5945795c7f73bc2ef51470dc9.jpg)
We sure like our 30 inch Small enough to not strobe the can lights but enough to move some air
Sent from my iPhone using Tapatalk
-
I have 8 can lights ready but now I’m considering taking out the joists and flat ceiling and going for the vaulted ceiling. I’d have to get some low profile can lights for the 5.5 inch rafter space.
Still debating. I’ll finish the soffit and facia and roof first. Then I’ll make the decision.
Once all that is done then I’ll start working on the cabinets and countertop along the back. Plan is to have a 48inch or 60 inch commercial stove with griddle, burners and oven(s). Sink to one side. Maybe a countertop char griller. Then the pellet smoker and charcoal pit on each end.
Couple of big ceiling fans and then a custom made farm table with 6 inch x 10 inch pine slabs. 3 of those 10-12 ft long with welded metal base.
Sent from my iPhone using Tapatalk
-
When you selling the Houston digs and relocating permanently?
-
Sure looks good.
I used flat LED pods for much of my builds Charles. Many on amazon, just sheetrock thick with spring clips for 12v. You can get them at HD and lowes that have the juction box for 110 too, but pricey.
-
When you selling the Houston digs and relocating permanently?
Maybe sooner than I thought of this virus,BLM,Antifa crap keeps up much longer
JR I used some of those flat ones in the hallway upstairs. Pretty cool. They had a switch on the box to change the kelvin color of the lamp from cool to warm white.
Sent from my iPhone using Tapatalk
-
When you selling the Houston digs and relocating permanently?
Maybe sooner than I thought of this virus,BLM,Antifa crap keeps up much longer
JR I used some of those flat ones in the hallway upstairs. Pretty cool. They had a switch on the box to change the kelvin color of the lamp from cool to warm white.
Sent from my iPhone using Tapatalk
Maybe if rioters, err, I mean peaceful demonstrators torch your place, you forgo the selling thing and just collect the monee...Then leave the lot a scorched ruin as a monument to weak leadership and emboldened sheeple.
-
That could be a plan here,,,,,,,,
-
Picked up the metal roofing components and made progress. Have to go pick up the ridge vent from a different vendor tomorrow and I can get closed up top before starting on the soffit/facia and eave trim
(https://uploads.tapatalk-cdn.com/20200723/637541bb40201909951638ae3e17b99b.jpg)
Sent from my iPhone using Tapatalk
-
Some of that cedar tongue and grove stained up would look and smell wonderful onderside of that.
Sent from my iPhone using Tapatalk
-
Agreed Dave. In this instance I’m trying to maintain consistency between the three buildings which means hardi soffit facia and 4x8 sheets on the ceiling. If I did T&G on this my OCD would take over and I’d do it on the other two structures too!
Sent from my iPhone using Tapatalk
-
You could leave punted hardi on the exterior and change up the upper ceiling
I’ll look for a photo. We used to have lots of church pavilions that way. They look nice
(https://uploads.tapatalk-cdn.com/20200724/b398c58671a97614f03c3ed695fd7229.jpg)
(https://uploads.tapatalk-cdn.com/20200724/02ea67b135b9727fb0c29dcd58e5f90a.jpg)
Sent from my iPhone using Tapatalk
-
I think the ceded holds its own with a painted exterior. It also pulls your inside the casita to the outside too
Sent from my iPhone using Tapatalk
-
Dave those are some beautiful pictures. The first one was kinda what I was originally thinking before the HH6 matching obsession kicked in. So, here we are.
Today drive 3 hours round trip to pickup the ridge vent only to find after I got home that they bent the end caps for 12/12 and not 6/12. I’ll get those installed whenever they get the correct ones made. Still got the vent and the rest of the ridge roll installed and started working on the soffit and facia.
Starting to get some of the extreme outer bands of the tropical storm so I knocked off, and covered materials with tarps and about to make some home made pasta sauce..
(https://uploads.tapatalk-cdn.com/20200724/4fd4211bc4cdd6f7d42905dcd3a229ef.jpg)
(https://uploads.tapatalk-cdn.com/20200724/ba594c5b3c40d49c26f59b222ead35bc.jpg)
(https://uploads.tapatalk-cdn.com/20200724/154da7cae511076d96012e712a981577.jpg)
Sent from my iPad using Tapatalk
-
Really nice work, very clean
-
Making progress. Slow going handling 12ft pieces of brittle hardi by ones self. Making some jigs to help hold stuff in place helps. One gable end to go with soffit facia and metal roof eave trim then I can cover up the gable area with 15/32 osb and hardi before moving on to the electrical and ceiling
(https://uploads.tapatalk-cdn.com/20200726/c986701283dd5bdd800ac7e5ada566d0.jpg)
Sent from my iPhone using Tapatalk
-
TRN. You never cease to amaze me how much you get done by yourself and in Texas heat and humidity.
All top shelf work.
Sent from my iPad using Tapatalk
-
TRN. You never cease to amaze me how much you get done by yourself and in Texas heat and humidity.
All top shelf work.
Sent from my iPad using Tapatalk
I agree Mike. That mans got talent.
-
Yes he does, sure looks nice.
-
X3 or 4. The man is a workhorse. True to his kind, he has that Texan thing all over him. No wonder he is accomplished!
-
Thanks guys. (https://uploads.tapatalk-cdn.com/20200728/80061470308866ce576fb4872376d46a.jpg)
Roof, soffit and facia finished. Gable
Ends should go fairly quickly then on to lights and electrical and then the ceiling and trim.
Wanted to work hard to get it to this dried in stage and can take a breath now
Sent from my iPhone using Tapatalk
-
Is your fascia board a. Four inch hardie trim board? Do you need to predrill for the roofing metal screws for the trim?
Sent from my iPhone using Tapatalk
-
It’s 5.5 inches wide. And no pre drilling. I use the wood grip screws that have a self drilling tip followed by wood threads.
Sent from my iPhone using Tapatalk
-
Okay, I wasn’t sure how the hardie trim would do with the those screws. That’s what my roofing supplier provides with the metal roofing as well. Glad to hear there isn’t an additional step.
That shelter is looking great, looks like something I need to build here.
Sent from my iPhone using Tapatalk
-
Made a run to Lowe’s and got some more material.
One end done and the other tomorrow.
(https://uploads.tapatalk-cdn.com/20200801/4155ab60f5de4f31f25b8e689ff72960.jpg)
Sent from my iPhone using Tapatalk
-
Next comes the built in BBQ?
-
Well I have to run electrical and lights and then hardi panel on the ceiling, caulk and paint.
Plan is to have pellet smoker on one end, charcoal pit in the other. Then along the back will be 24 ft of counter with a commercial SS range/oven in the middle and a sink on the left. The range will have double ovens, 4 burners and a 36 inch flat top. Should handle all the cooking chores.
I actually plan to custom make a cabinet pellet smoker when I’m completely done. 36x18 about 6ft tall with adjustable racks. Should be able to fit about 4 racks in there. More than enough room to cook a small meal ;-)
Sent from my iPhone using Tapatalk
-
That looks great. I want something like that at the campground.
Sent from my Pixel 2 XL using Tapatalk
-
Cans and ceiling fan boxes in. Wiring run. Hardi panel in. Just need to trim it out around the inside of the beam. Then caulk and paint before moving on to wrapping the columns in treated lumber and finish electrical.
(https://uploads.tapatalk-cdn.com/20200815/2117953e51019eb1ac8d49564fb1573a.jpg)
(https://uploads.tapatalk-cdn.com/20200815/03ed253fcab6dca89c06f83284ad4661.jpg)
(https://uploads.tapatalk-cdn.com/20200815/ad1d57470af342fb55807eb1c83f6bd0.jpg)
Sent from my iPhone using Tapatalk
-
That’s good progress for sure!
Sent from my iPhone using Tapatalk
-
Yeah. It’s 102 outside. Time for lunch and start building an AR
Sent from my iPhone using Tapatalk
-
That looks great, almost finished up!
For all I have built I wish they had figured a better way to retain all the springs. Like set screws, so simple!
-
Been a while since I built a lower but it took only an hour
Teaser pic. Details coming with pics in the build thread
(https://uploads.tapatalk-cdn.com/20200815/9cd604c5a5221d9959f66505b10e8e1a.jpg)
Sent from my iPhone using Tapatalk
-
I built my 300 on a tan base, 556 black and 22 is OD.
Easy Id of ammo/mags.
-
Been a while since I built a lower but it took only an hour
Teaser pic. Details coming with pics in the build thread
(https://uploads.tapatalk-cdn.com/20200815/9cd604c5a5221d9959f66505b10e8e1a.jpg)
Sent from my iPhone using Tapatalk
Nice!
-
Hardi all complete. Cleaned up debris and the shop a bit. Getting ready for caulk and paint next weekend
(https://uploads.tapatalk-cdn.com/20200816/f6ed8ffb626d9fe20999785e7bf10c4d.jpg)
Sent from my iPhone using Tapatalk
-
:likebutton: Looking good Charles!
-
Looks like that table needs a friend now
-
Thanks Shawn. Bob the plan is a custom made farm table. Still noodling it but 6x10 rough pine slabs 10ft long, 3 of those on a welded steel base.
Sent from my iPad using Tapatalk
-
Real Man party?
Fire, brew, guns, conservatives, what could go wrong!!
-
It would have to be Conservatives, Guns, Fire,Brew...
Sent from my iPad using Tapatalk
-
You guys cutting Ken out?
Sent from my iPhone using Tapatalk
-
Not unless he brings H as a date,,,,,,
-
But then it’s guns brew fire.
-
Correction. Guns, backhoe, brews, fire
Sent from my iPad using Tapatalk
-
:knucklehead:
My bad.
Missed one step.
Charles you nailed it there.
Lol
-
Aaaaaannnnd painted. My Titan 440 rocks. That thing has paid for itself many times over. It took longer to clean the machine than to shoot the paint. Trim done by hand
(https://uploads.tapatalk-cdn.com/20200823/6eccca2b6f9ef31fb070db2705d48d78.jpg)
(https://uploads.tapatalk-cdn.com/20200823/268573c890150aadd45da3226689df2f.jpg)
Sent from my iPhone using Tapatalk
-
Looks good Tex, You have some fans you said?
Sent from my iPhone using Tapatalk
-
Do you need to worry about overspray getting on everything else, like tables etc? Or is th overspray at that point mostly just a. Fine mist that has dried in the air?
Sent from my iPhone using Tapatalk
-
Yeah for the most part it’s dried by the time it hits the ground...and my face...
Ordering two 7 ft fans. Right now I’m bidding on a Vulcan commerical range with 2 burners, 24 inch griddle and a 26 inch oven. It’s a $5500 stove new and I’m hoping I can pick this one up used for about $1500
Gonna build the counter/cabinet out of metal studs/track/channel. Sink on the left end, Range in the middle and I’m thinking of a recessed area in the counter to the right where I might put a Charbroiler but then have a removable section of granite counter for a cover for when its not in use. Would also like either a set of warming drawers or a holding cabinet. I’ve found holding cabinets that are about the size of the dishwasher and open like a mini fridge and you set pans on rails inside. Great place to hold food at temp.
Sent from my iPad using Tapatalk
-
Ok. So a little earlier than I had hoped but when they become available at auction you have to jump on it. Not many smaller Vulcan ranges out there to be had at auction
This thing is a tank. 600lbs. Still have a lot of work to do before it gets put to use but now I have a definite plan/dimension for the opening. Now to find a good cook/hold or warming 1/2 cabinet. Likely an Alto Sham. Then a charbroiler
(https://uploads.tapatalk-cdn.com/20200824/080a516d842d691cd9b6763048820787.jpg)
Also got the recessed LED lights in. Painted the trim oil rubbed bronze to match the main and guest house.
Going to start figuring out metal stud construction techniques for the counters and cabinets.
(https://uploads.tapatalk-cdn.com/20200824/20c3fb26e5b436c47faaf85f5d09310e.jpg)
Sent from my iPhone using Tapatalk
-
Ooo that stove is purdy!
Sent from my LM-Q730 using Tapatalk
-
Ordered the fans for the outdoor kitchen. These supposedly move 14,000cfm. We shall see. I wanted 96 inch, but the layout would have had the blades obstructing the lights which creates that strobe effect
https://www.homedepot.com/p/TroposAir-Titan-II-84-in-Indoor-Outdoor-Oil-Rubbed-Bronze-Ceiling-Fan-with-Remote-Control-88253-88279/306532907
Sent from my iPad using Tapatalk
-
Sure wish you would build something half azzed. Getting tired of giving you props on your projects.
That being said. Beautiful work.
-
I think its more the invite we all need?
-
Sure wish you would build something half azzed. Getting tired of giving you props on your projects.
That being said. Beautiful work.
Want me to tell him how many of those fanz customers install and replace due to faulty product?
Sent from my iPhone using Tapatalk
-
Sure wish you would build something half azzed. Getting tired of giving you props on your projects.
That being said. Beautiful work.
Want me to tell him how many of those fanz customers install and replace due to faulty product?
Sent from my iPhone using Tapatalk
Nah. Don't say anything.
-
Lol
Sent from my iPhone using Tapatalk
-
5 year warranty. I’ll take it.
Sent from my iPhone using Tapatalk
-
Just keep the receipt ;)
-
Sure wish you would build something half azzed. Getting tired of giving you props on your projects.
That being said. Beautiful work.
Want me to tell him how many of those fanz customers install and replace due to faulty product?
Sent from my iPhone using Tapatalk
Nah. Don't say anything.
Had one in last house, it was a pos.......
-
Sure wish you would build something half azzed. Getting tired of giving you props on your projects.
That being said. Beautiful work.
Want me to tell him how many of those fanz customers install and replace due to faulty product?
Sent from my iPhone using Tapatalk
Nah. Don't say anything.
Had one in last house, it was a pos.......
Hanging fans blows
Sent from my iPhone using Tapatalk
-
My bad. Lifetime warranty indoor. 10 year outdoor.
Sent from my iPad using Tapatalk
-
Extruded aluminum blades. Made very well. Moves good air.
(https://uploads.tapatalk-cdn.com/20200905/86a7db071aa4bbd89bf3542e53e2ab2f.jpg)
(https://uploads.tapatalk-cdn.com/20200905/4076021240f2f3af11d2281fbf949fd2.jpg)
Sent from my iPhone using Tapatalk
-
Looks like one of Don’s chinooks, albeit upside down.
-
He'd get flashbacks sitting under em,,,,,,
-
Looks like one of Don’s chinooks, albeit upside down.
Probably moves the same amount of air going by the size of those blades!
-
So I started wrapping the steel columns in treated lumber. Ripped down some 2x lumber to cover. Hoped to give it some scale and heft with the thicker lumber. Turned out to be about a 7 inch square post. The only problem was where it met the top structure it was sticking way out from being flush. Looked goofy. So off it came and I put 1x cedar on it instead. (.75 actual). Looks better. Will be interesting to try to stain and match the treated posts.
Two on the front done. Will wait until kitchen counters and cabinets along the back are done before I trim those posts.
(https://uploads.tapatalk-cdn.com/20200907/0e972bd9725cbfe97638ff7a2ecdbf00.jpg)
Now I need to get a 4x4 cedar to make the base caps to cover the plate and bolts.
Sent from my iPhone using Tapatalk
-
That will look sweet
-
Thanks JR. I haven’t forgotten about you. Your package is sitting on the counter just waiting to be shipped.....
I also planted the fall garden. I have some tomatoes, jalapeños, bell peppers in green orange, yellow and red, some small onions, basil, rosemary, Napa cabbage, and cauliflower. Gonna drop some chard and mustard greens, carrots and turnips tomorrow.
Sent from my iPad using Tapatalk
-
Salsa?
-
Maybe....
Sent from my iPad using Tapatalk
-
Looks like one of Don’s chinooks, albeit upside down.
Ya, saw that too! Was wonderin' where the rest of it was???
-
Looks like one of Don’s chinooks, albeit upside down.
Ya, saw that too! Was wonderin' where the rest of it was???
Thats the new stealth/transformer model. Wait until those panels open up.
-
So opened up the area at my pistol range to about 50 yards. I have 180 degrees shooting. So I ordered some new steel targets 12x20 since I’ve been shooting on the 7.5x12 which are challenging when moving.
May put one 100 yards into the woods on a narrow lane to sight in rifles too.
Started looking at loads for the 300blk. Finished off the prep on the last 2000 once fired 5.56 lake city brass. Will clean up and adjust the progressive press and start loading for a change.
Sent from my iPad using Tapatalk
-
Do you get from Shootsteel? I just got a few from them.
-
Yes. All my target come from them. As long As they fit in the flat rate boxes the price is good.
Sent from my iPhone using Tapatalk
-
Sales aren't bad either, just got a 10x20 to put way out there. I need at least 6 more rounds for those odd shots
-
We had been ordering most of my steel from ShootingTargets7 along with their rubber straps to hang everything. Lately we have been going with something like the JC Steel targets slotted targets with AR500 hangers. They are more expensive but are a lot nicer if you are moving stuff around from time to time. Also, no hardware or straps to worry about to brake or maintain. I just put an order in to get a full 5x10 sheet of AR500 cut up for more targets and hanger posts for the club.
-
I called about AR500 locally and may still buy a sheet and have it jetted just to get my targets free or near free
What are you paying for AR500 and jetting?
Sent from my iPhone using Tapatalk
-
I called about AR500 locally and may still buy a sheet and have it jetted just to get my targets free or near free
What are you paying for AR500 and jetting?
Sent from my iPhone using Tapatalk
$300- $350 for a 4'x8' sheet of 3/8" AR500 and another $300 or so to get it cut.
-
Well finished the outlets in the ceiling and mounted the TV
(https://uploads.tapatalk-cdn.com/20200919/58d377d7cca08719f4e9d07e7deb071d.jpg)
Sent from my iPad using Tapatalk
-
So you plan on taking it down each hurricane ?
Sent from my iPhone using Tapatalk
-
Very nice!
-
I’m 200 plus miles from the coast. Not too many big wind events here. Maybe a tornado. I got the 4 year warranty on it and insurance will take it from there.
View from the firepit tonight. Girls kinda social distancing with friends who are staying in the guest house
(https://uploads.tapatalk-cdn.com/20200920/e5663c32660cf23577121aeb3217494b.jpg)
Sent from my iPhone using Tapatalk
-
So what are your kids in Tex doing for school? Your not full time at the hide? Are they coming back and forth each weekend?
Sent from my iPhone using Tapatalk
-
Virtual for now. Decision time coming up in October.
Sent from my iPad using Tapatalk
-
Mine go back to physical school on Monday the twenty-oneth.
Two days at school, two days virtual (Read: Farm chores) then Fritag iz off.
(Read: Friday night game, then farm work, n' wood splittin)
And
Yes, slavery is a good idea ;-))
-
Mine are every day but shortened days
Sent from my iPhone using Tapatalk
-
Mine were supposed to be 2 days in, 2 days virtual but that all away with the Komi's here. V only.
-
Mine were supposed to be 2 days in, 2 days virtual but that all away with the Komi's here. V only.
So sad, JR
For the good people of what used to be our greatest state
The communists have turned Cali into a welfare state where stupid rules the day
But I also say it is to the people of California to fix that mess out there themselves. I only hope that they have the will to do so
Going to end poorly if they don't...for all of us.
-
Had some really good salsa last night. Very diff with smoke taste :likebutton:
Problem with that Don is the good people are leaving, being told to shut up or just don't care anymore. When you voice doesn't count, you address it other ways.
-
Received 3 new lawn ornaments today
12x20 3/8 AR500
(https://uploads.tapatalk-cdn.com/20200924/38a20d06f1286d606eb5f631643fb430.jpg)
Sent from my iPhone using Tapatalk
-
JR, I believe they call that voting with your feet.
Tex, nice lead recycling centers. :likebutton:
-
JR, I believe they call that voting from the rooftops
FIFY Shawn
Sent from my iPhone using Tapatalk
-
JR, I believe they call that voting from the rooftops
FIFY Shawn
Sent from my iPhone using Tapatalk
Meh, only if they’re Korean........ :wink:
-
I am voting with my feet, wallet and as much as I can muster.
Did you hear our wonderful gov grusum just said he wants all elec personal vehicles by 2035. What do you charge them with when we have brown outs now because of "green energy"
-
I am voting with my feet, wallet and as much as I can muster.
Did you hear our wonderful gov grusum just said he wants all elec personal vehicles by 2035. What do you charge them with when we have brown outs now because of "green energy"
Think they have wind turbans around their necks they plan on wearing to capture all of their hot air
Sent from my iPhone using Tapatalk
-
I'd stand them up
Not just lay them around on the grass!
Geez...
Texans...
-
Stepping stones next to the flag stone?
Sent from my iPhone using Tapatalk
-
I'd stand them up
Not just lay them around on the grass!
Geez...
Texans...
Right next to the “no trespassing” signs....with some nice shot mark groupings
Sent from my iPhone using Tapatalk
-
Well, painted and installed the lawn ornaments. The range is a work in progress. There are a lot of exposed roots and sawn off stumps that makes moving and shooting more challenging. I actually like it. You have to feel with your feet as you move.
Wife shot her new 9mm today. She liked it except that she’s limp wristing it a bit and she didnt like that hot brass went down the front of her shirt. At least there was no FTF from her weak wrists, just short thrown brass.
(https://uploads.tapatalk-cdn.com/20200926/ffb78ab0f254307c60eb45bd7794de8d.jpg)
I set these about 10 yards back from the 5.5x7.5. I can start up close and move back and hit the little ones on the way to cover behind a big Elm tree.
(https://uploads.tapatalk-cdn.com/20200926/b5cc87df23f6a8274dbf0c7d7a7fa9c3.jpg)
Sent from my iPad using Tapatalk
-
Those are way to pretty, you know what to do. I just got another 6 pack on special.
About 1/2 a jar left, tasty stuff :beercheers:
-
That must have been quite the sight to see her dance around from that hot brass.
Did you at least offer to help her get it outta there? ;)
-
Nice range Charles. Looks like a blast, pun intended.
-
I was going to make some of them targets out of scrap we have laying around. How thick are they?
Sent from my LM-Q730 using Tapatalk
-
These are 3/8 inch, hardened AR500 steel. Mild steel unhardened, may work for some pistol rounds, but it will get pock marked pretty bad, I assume and deformation creates a ricochet hazard so wear eye pro and watch your distance. https://actiontarget.com/the-truth-about-steel-and-steel-targets-pt-2-2/
Sent from my iPad using Tapatalk
-
Mild steel should work fine for a long time with 22lr, and milder center fire pistol. Any center fire rifle is a no-go on mild steel though. Regardless, always where glasses when shooting steel.
-
Got wood??
Picked these up from my local saw mill guy. All white oak. The large ones are 5x10x100 inches. Those are going to make the table top of the farm table for the outdoor kitchen. Not sure I realized the table top would weigh 600 pounds.... No one will steal that anytime soon.
I think the others may make benches for the farm table. I still have another log to process as well. Now to get welding on a base. Wonder if I should kabuki them, or what ever that Japanese burning wood preserving thing is and then put some urethane on them..... Thoughts from the menses?(https://uploads.tapatalk-cdn.com/20201031/2bf4c56510f48d284cd7f8dbee3c636e.jpg)
Sent from my iPad using Tapatalk
-
Will 30” be wide enough on the table?
-
Yeah. I don’t want it too wide. My current picnic table is about that. Of course I have another log if I need to make it 40 inches.....
Sent from my iPhone using Tapatalk
-
Too pretty to burn imo, but less maintenance, maybe?
-
Finished this today. Pick up my roof panels Monday. Didn’t realize I had this much junk laying around
(https://uploads.tapatalk-cdn.com/20201108/8542ba3b361a8d92c8be9ddd29912149.jpg)
Sent from my iPad using Tapatalk
-
Good job :likebutton:
-
Heck I need one of those here. The 4x4s don't cut it anymore.
Going to cover it?
-
Yep. R panel metal roof. Pick up the panels Monday. Then I can move the untreated wood out of my shop to the upper level which should stay completely dry.
Sent from my iPhone using Tapatalk
-
Looks good, Is there a way to move it while loaded with a tractor or some type of forks? Drag it if need be on some skids?
Sent from my iPhone using Tapatalk
-
Dang you! My next project I guess. If you saw my metal supplies in their current state you would cry.
Sent from my MAX 10 using Tapatalk
-
Looks good, Is there a way to move it while loaded with a tractor or some type of forks? Drag it if need be on some skids?
Sent from my iPhone using Tapatalk
Negative. Too heavy for my tractor anyway. Hopefully I don’t need to move it any time soon.
Ken, I hear you, that’s why i sidetracked and started this mini project.
About to weld up a table base for the white oak slabs, 8ft table, 30 inches wide. Wood plus base will be over 600 lbs when the wood is dry. Right now it would be closer to 800. Base is going to be 4x4 square tubing 1/4 wall.
Then I need to get a bunch of 2x2 galvanized square tubing to fab the cabinets for the outdoor kitchen
Sent from my iPad using Tapatalk
-
From working in the cabinet shop we built lots of tables. The one I tester the most is we didn’t have the welder put any cross braces for the weight. Your table will lots lots lots bigger. What ever you do make sure it has lateral support so if someone pushes an end it will not taco over.
Sent from my iPhone using Tapatalk
-
I was this old when i learned 2 new things
1. https://en.m.wikipedia.org/wiki/Karen_people
2.
-
Well, wife unit strikes again. Tomorrow the flooring guys are coming to give me an estimate to replace the perfectly good tile floor with the tile we laid in the guest house.....Wife likes the floor we put in the guest house better than the floor in the main house so now they need to match.....
1st world problems for sure.
But my revenge is I have the concrete guy coming to give me an estimate on enclosing the back 300 sq ft of the shop and add 300 sq ft to the front and then add a 30x30 concrete parking pad out front. Should net me a place to park without tracking gravel into the house and an enclosed shop at 40X30. The plan later is to add a 40x60 to the side for a total of 40x90.
Sent from my iPad using Tapatalk
-
That’ll show her!!! ;)
Sent from my iPhone using Tapatalk
-
I like this logic lol
Sent from my iPhone using Tapatalk
-
Good move Tex. But like with chess, you may be out-matched and not even know it until the trap is sprung
Be careful...
-
Concrete guy came today. Tentatively scheduled for Monday after Tgiving. I’m supplying the concrete and the rebar and its costing me $2/sq ft
Sent from my iPad using Tapatalk
-
We used to bid $12 a sqft but that includes the form, site prep and everything
Sent from my iPhone using Tapatalk
-
I hope to be well under $10sf for my pad. I plan on doing much of the work.
-
He wanted $6 turnkey but I’ll be closer to 4.25 when done.
$12 a ft Dave ? Geez man. I paid $18/ft for turnkey concrete with hand laid flagstone on top.
Sent from my iPhone using Tapatalk
-
Paid the excavation, road base and compaction, the concrete, the finish guy to pour it. Plus my profit on top. People didn’t bat an eye at it.
Sent from my iPhone using Tapatalk
-
You must not have as much illegal labor there.
But look. I get to play Ken today!
(https://uploads.tapatalk-cdn.com/20201120/1d8cda4848399e058a84bc31bc7c840d.jpg)
Sent from my iPhone using Tapatalk
-
We do try to employ legal folks, and men who are good at their craft but I’m not past saying we made good profit off of after the fact concrete being added to the house, I don’t recall ever telling a customer the sqft cost but only a total based off what I bid
Sent from my iPhone using Tapatalk
-
Just be yourself bud. The world will be a much better place, and more level. Lol
-
So i ran it 8 hours and got 8 stumps out and dug out some clay to patch the pond berm and dug a trench for a longer pool drain and for propane line to the out door kitchen.
Almost tore up the septic line but saved it. Tore up the cat6 cable to the shop but there really no other way. Missed the power to the shop and the power to the casita and only slightly dinged the corner piece of the metal building.
Now the ditz from the rental place didnt have the pin locked all the way and I lost the bucket pin and had to dig out all the fill from the big stump hole to find it. Arrg.....
All in all a good day.
Sent from my iPad using Tapatalk
-
So i ran it 8 hours and got 8 stumps out and dug out some clay to patch the pond berm and dug a trench for a longer pool drain and for propane line to the out door kitchen.
Almost tore up the septic line but saved it. Tore up the cat6 cable to the shop but there really no other way. Missed the power to the shop and the power to the casita and only slightly dinged the corner piece of the metal building.
Now the ditz from the rental place didnt have the pin locked all the way and I lost the bucket pin and had to dig out all the fill from the big stump hole to find it. Arrg.....
All in all a good day.
Sent from my iPad using Tapatalk
Do we need a nomination for the "Un-Don project wreckage award?"
Seems like he met most of the criteria
That being:
1. Project is started with the purest and best of intentions
2. Something gets broken
3. Usually a lot of things get busted up
4. We all get a good chuckle out of the tellin' of the story
5. The perpetrator of said destruction is really just amature pretendin' to know what he's doin'
6. and a couple other things...
-
The reward being Don sends out one of those stickers we all want one of ?
The down side is Charles didn’t document any of this wreckage and pictures are proof
Sent from my iPhone using Tapatalk
-
The reward being Don sends out one of those stickers we all want one of ?
The down side is Charles didn’t document any of this wreckage and pictures are proof
Sent from my iPhone using Tapatalk
Hmmm
Good point
probably didn't happen...
Still the makin's of a gud storie
-
(https://uploads.tapatalk-cdn.com/20201122/d0af84d860b5999441cd9528ae141276.jpg)
Here’s a shot
Sent from my iPhone using Tapatalk
-
Dug some holes for fruit trees while I was at it.
Extended the pool drain
(https://uploads.tapatalk-cdn.com/20201122/fd573abe16ceff0b3d0db848ac9bdd70.jpg)
(https://uploads.tapatalk-cdn.com/20201122/2b343fc0ad9b1a2063acbea96057b43f.jpg)
(https://uploads.tapatalk-cdn.com/20201122/7d2d49575e2ea39c33a04c38ca42a04c.jpg)
(https://uploads.tapatalk-cdn.com/20201122/69400fcbc5be271532d5ad0c24defa61.jpg)
Sent from my iPhone using Tapatalk
-
That’ll buff out.
-
So I’ll get on the board at the concrete plant for 22 yards of Crete for Tuesday after next. Get the shop expanded and a nice parking area for a change.
Sent from my iPad using Tapatalk
-
Well I still have you beat by breaking the same water line 3 times in one trench, in the same day.
-
That’s some nice looking soil. Here you’d be lucky to get more than 12 inches in before hitting a rock the size of a Buick and clay.....lots of clay.
Sent from my iPhone using Tapatalk
-
Mine would back fill with water, grow mold and then a dog would lie down in it
Sent from my iPhone using Tapatalk
-
You laugh but that is all red clay.
Sent from my iPad using Tapatalk
-
so what type and size of fruit trees? I was working with a guy from Florida this week and he has 400 persimmon trees to plant when he gets home.
-
Well I still have you beat by breaking the same water line 3 times in one trench, in the same day.
But how many mowers have you sunk? :tongue:
Charles, is you truck bagged? My springs are sitting on the overloads now.
-
Steve. Not sure yet but I wanted to dig the hole and get the soil amended. Probably pear, fig, Avocado, peach, maybe plum
Jr. I steered well clear of the pond with the mini x
No bags on the bus. Haven’t needed them. I put new springs on it off a 2010 when I took the deavers off. Hard to tell from that picture but it’s level. I kept the factory rake when empty.
Sent from my iPhone using Tapatalk
-
Steve. Not sure yet but I wanted to dig the hole and get the soil amended. Probably pear, fig, Avocado, peach, maybe plum
Jr. I steered well clear of the pond with the mini x
No bags on the bus. Haven’t needed them. I put new springs on it off a 2010 when I took the deavers off. Hard to tell from that picture but it’s level. I kept the factory rake when empty.
Sent from my iPhone using Tapatalk
Make sure you get self pollinating trees, otherwise no fruit for you....lol
-
So I got in the schedule with the concrete guys for next week. I’ll supply the concrete and rebar and the crew forms and lays for $2/ft
Got the rebar and purlin and open cee yesterday and ordered the R panel for the shop enclosure/expansion.
Today off to get the concrete colorant and some tie wire
I’m pumped about having a shop I can work in while a vehicle is in it.
So update on the wife’s project. They wanted $12k to pull up and lay tile. Lol. That’s double what my concrete project costs. So that’s on hold at the moment. Taxes are due and we’ll see after the first of the year.
(https://uploads.tapatalk-cdn.com/20201124/5ba80a5d1a407d6ef3f684cf83d3d247.jpg)
Sent from my iPhone using Tapatalk
-
Taxes much on the rural place?
Just curious. Dirt cheap in the Tuck outside and away from any city limits.
My farm: $564 this year
-
My agg exempt property (hide) is about 2k a year.
House in Houston - 20k
Any wonder why I’m ready to move up here full time...
Sent from my iPad using Tapatalk
-
That must be one nice home Charles.
Ridge is $221 this year, but I doubt that will last long.
-
That must be one nice home Charles.
Ridge is $221 this year, but I doubt that will last long.
This year: dirt
Next year: Dirt + house = moar monies
-
That must be one nice home Charles.
Ridge is $221 this year, but I doubt that will last long.
Well we don’t have income tax so we have to make up for it somewhere. Conservatives=boiling the frog slower.....but they still boil the frog (high taxes)
I fear we are heading towards the refreshing the tree of liberty......
Sent from my iPad using Tapatalk
-
I fear we are heading towards the refreshing the tree of liberty......
I think many of us here fear that. Maybe thats why we build out a little.
-
So. Not having had any rain for weeks and weeks it starts raining as I’m prepping to set the corner posts to expand the shop. Not sure I’ve mentioned it but have I mentioned how much I absolutely hate this red gumbo clay when it gets wet? It gets in and on and sticks to everything.
(https://uploads.tapatalk-cdn.com/20201127/3e74d79e3c96808797fc49e8842be13d.jpg)
It cakes up so heavy that you get about 3 inches taller and weigh another 25 lbs.
But got posts set and concreted.
(https://uploads.tapatalk-cdn.com/20201127/a26510fd37b4dfb2c78a58dab7e5be27.jpg)
Tomorrow I’ll start stripping the panels off the front and back in preparation for the concrete guys.
Then I’ll weld in the open C channel between the existing corner and the new posts before setting the purlins across.
Sent from my iPhone using Tapatalk
-
Why would you wear those knowing there is any mud around. Mind you, I like my comfort and tennis shoes are the norm.
-
Clay is the worst..... I despise the heavy blue stuff the most
-
I had boots and jeans on but that was just after I changed and went back out to cover the concrete with plastic
Sent from my iPhone using Tapatalk
-
Clay is the worst..... I despise the heavy blue stuff the most
Ill put this up against blue/gumbo any day. So today was miserable. My ladder got so heavy I was having trouble carrying it around. Had to stop a few times and take a putty knife to get all the mud off of it..
in the end I got the purlins up and the rest of the panels off. It was dark when I quit welding the purlins so no pictures.
Concrete guys come tomorrow to form up the shop and parking pad.
I’m very excited
Sent from my iPad using Tapatalk
-
All I’m gunna say is that I don’t miss that Indiana clay......
Keep up the good work Charles :likebutton:
-
(https://uploads.tapatalk-cdn.com/20201130/a7be437b4b84c2b3ea9034ea5aa4ada0.jpg)
(https://uploads.tapatalk-cdn.com/20201130/155e42c266ec0a98c4a045cb7f2fe723.jpg)
(https://uploads.tapatalk-cdn.com/20201130/2729e140039d34b85a8c221a742e3fbc.jpg)
(https://uploads.tapatalk-cdn.com/20201130/68d81dc2e01191a07259ccb5ef807495.jpg)
Concrete guys showed up today. I stripped the rest of the panels off the front of the shop, took the roll up and man door and frame off. Set bigger conduit for electrical service. My sheet metal order was not ready today so I’ll have to pick it up tomorrow. The real work starts once the Crete is in. I have to redo all the electrical, lighting and re install the doors.
Sent from my iPhone using Tapatalk
-
Wow. You weren't kidding. Nice size slab!
-
Yeah, when I bought the place 5 years ago I should have just negotiated a 40x60 new shop instead of having him concrete the floor of the 20x30 he had already done. Now I’ve mickey moused two additions to it. Se La vie.
Now I’ll have 40x30 and a 35x30 parking pad. I’m so over tracking gravel and mud into the house that this will at least allow me to have a decent parking and shop area until I add another 40x60 to the right of the shop for a total of 40x90.
And if I pour 20 yards at a time I can get 135 ft closer to the front gate each time....that will take 5 pours to get there...
My next move may be to add a second seacan and build a roof between them to park outdoor equipment....
Anyone got design plans for trusses made out of 2x2 angle that will span 35 foot? I think i can build my own trusses to set on the seacans.
Sent from my iPad using Tapatalk
-
Your city slicker is showing... concrete to the gate... *smh*
-
Your city slicker is showing... concrete to the gate... *smh*
would it be better for asphalt?
Sent from my iPad using Tapatalk
-
Concrete for the win in ever instance. Less maintenance. Washes up nice.
I think you should be able to copy what they do at the large super stores.
If for sure try to source something before I did it
Sent from my iPhone using Tapatalk
-
Your city slicker is showing... concrete to the gate... *smh*
This makes me chuckle, my wife just told me a couple days ago while we were talking about having a house in the country, "its not like we'd have anything more than gravel driveway to the garage." I laughed because working under vehicles in gravel is not something i like to do, and I still intend on a concrete driveway once we get to that point, which apparently she was surprised by.
Charles, very good work sir! I look forward to having space again one day, and seeing your shop expand really makes me miss the bit we had when we lived in AZ.
-
Oh I have nothing against the concrete parking area! I just thought it funny that it’s a country home and he talking about concrete to the gate.
:D
-
I think you asked me about the trusses I've been using, the ones from a cotton gin. Just so happens that they're 36'. Matter of fact, just pulled one out of the stack today. I have to extend it to 39' for the last section of roof.
I'll take some pics tomorrow.
-
Awesome. Yeah Ken I’m trying to cheap out on roof trusses by building them myself.
Sent from my iPhone using Tapatalk
-
Oh I have nothing against the concrete parking area! I just thought it funny that it’s a country home and he talking about concrete to the gate.
:D
I suppose if I did that I’d have to change the name of the thread...nothing with a concrete driveway can be a “hide”
Sent from my iPad using Tapatalk
-
Oh I have nothing against the concrete parking area! I just thought it funny that it’s a country home and he talking about concrete to the gate.
:D
I suppose if I did that I’d have to change the name of the thread...nothing with a concrete driveway can be a “hide”
Sent from my iPad using Tapatalk
Something with lodge in it maybe? Great Wolf Lodge? Great Hide Lodge? :tongue:
-
(https://uploads.tapatalk-cdn.com/20201201/f10978773a3ba3cc757c2f99686d771b.jpg)
(https://uploads.tapatalk-cdn.com/20201201/950fb432820839fa8b4b2c385780f9b1.jpg)
(https://uploads.tapatalk-cdn.com/20201201/39e916f40689085d6357678c8bef2dbd.jpg)
Progress.
Sent from my iPhone using Tapatalk
-
Werkin' konkrete...That's fun (Not!)
Going to be great when dried!
-
20 yards so far and just called for another 5
(https://uploads.tapatalk-cdn.com/20201201/195e998b69b52ab5fa064664964485f9.jpg)
Sent from my iPhone using Tapatalk
-
Nice!
The Crete can’t go to the gate.
But what you got going there is perfect.
Looking great.
-
So weird to see rear load cement trucks
Sent from my iPhone using Tapatalk
-
You mean Cement trucks? Still very common, new isn't cheap.
-
(https://uploads.tapatalk-cdn.com/20201201/d14dcf09f5b6c6d3c1cf4cbfb84c3043.jpg)
Broom finish and done. Forms come off tomorrrow. Picked up the sheet metal today and hope to get the roof on tomorrow.
Sent from my iPhone using Tapatalk
-
Hmm, room for more shop, another container and a lift.
-
You laugh. Those plans are already in the works. Directly to the right of the shop and attached will be another 60 ft wide and the same 40 ft deep but 14 ft walls. Behind that is the seacan and before the next shop will be another seacan and roof attached to the first one for an equipment shed.
Sent from my iPhone using Tapatalk
-
Do you guys get cold enough for concrete blankets?
Moving those things freaking sucked!!! The Crete heats up enough to melt the bottom of the snow, then as the mud cures the water then freezes into ice making the whole blanket solid!!
Snow and construction don’t mix
Sent from my iPhone using Tapatalk
-
Uh no. We got to 26 last night and that was unusual and only for a couple hours
Sent from my iPhone using Tapatalk
-
Well in the 40 degree rain yesterday I got the roof panels on the front to keep my stuff from getting any wetter than it already was.
Today I started at the back. The concrete guys did not come to get the forms off so I had to knock off the forms and start welding in the horizontal purlins and cutting the panels.
I am re using the panels on the back and I didnt want to have new/more screw holes so I had to weld the purlins back on exactly in the right spot and cut a few inches off the bottom since The slab is higher than the gravel that was in the parking area in the back.
Got that done and closed in the two sides in the back so that’s done. Tomorrow on to the front where I have to reframe the man door and roll up door. I think I under estimated the need for more panels but will find out tomorrow.
Once the shop is dried in, the real work begins. All new electrical EMT, air distribution and moving all the metal rack/shelving
Sent from my iPad using Tapatalk
-
So weird to see rear load cement trucks
Sent from my iPhone using Tapatalk
Around here is wierd to see front loaders.
Sent from my LM-Q730 using Tapatalk
-
I guess I’d like to know the pros and cons. I’d first think the rear would handle weight driving but then I think the whole truck might be smaller. The front loaders are dual engines. Usually six drive axles, and the floater
Just sure neat trucks either way they shoot mud
Sent from my iPhone using Tapatalk
-
Well Dave, your inquiry made me investigate. Front chute trucks are more expensive for sure.
So today I worked on framing up the front of the shop having finished the rear.
For some odd reason the purlins i cut loose are now miraculously too short and I will need more purlins. I’m also short R panel for the sides and am tired of trying to match up prior screw holes so I’m just getting all new R panel for the front and new trim. I ordered the R panel but it wont be ready until thursday but everything will be ready to install so it will go really quick.
I set the door today and the opening for the roll up on front. Will go get more purlin tomorrow and set the roll up door and then start moving shelve units and clearing up the mess.
I have to wait a week for everything to dry out before I can get top soil and limestone to landscape around the new parking pad.
Sent from my iPad using Tapatalk(https://uploads.tapatalk-cdn.com/20201205/4d6d2dfbdf4b5a5ba3145d955f4818e1.jpg)
(https://uploads.tapatalk-cdn.com/20201205/ad630abf46f7eb4f1f90785d50368300.jpg)
-
Nice. Rollup on the cont would be great
-
So, you're supposed to put sides on a shop? Asking for a friend
-
So, you're supposed to put sides on a shop? Asking for a friend
He has a man door, what else does he need? It’s that redneck thing, and least he has a roof that is more than I have right now. :beercheers:
-
Well, I lock the man door just to be safe....
Miraculously the purlins I cut loose are too short to re-use. Went to the metal store again....
Feel like Johnny Cash building that 57 Cadillac.
Got the roll up door installed and it took a while to get it tensioned correctly. I got most of the other purlins welded in and have 4 to go.
Ordered ten 8 ft 12,000 lumen LED lights.
Will get the remaining purlins in tomorrow and start moving some shelving to its likely resting place. The sheets will go up quickly when I get them next thursday.
Let the wife be the first to park on the new slab, she likes unloading groceries better on the slab with the easy walkway.
As usual its taken longer and I’m over budget, but that’s just how I roll....
Sent from my iPad using Tapatalk
-
Ok, Where do these purlins go? I’m used to seeing purlins stick out from the sides to create eaves. Don’t see anything like that in the pics.
-
Big difference Charles. He didn't pay for the caddy parts.
-
Touché Ken.
Ryan purlin is the material used to span the roof beams and attach roofing panels to. It comes in a “C” and “Z”configuration.
In this instance I’m using that same material for the hoizontal pieces spanning the sides between posts to attach the wall panels
Welding little plates or “clips” to the poles and then attaching the purlin
Sent from my iPhone using Tapatalk
-
Looks good Charles, glad you ordered all new steel. Sucks writing the check but will be happier in long run.
-
(https://uploads.tapatalk-cdn.com/20201206/a21e109869cae400c3db8adbce35d7a1.jpg)
Well the structures are all up I’m just waiting on panels now so I started a cleanup organization and moving all the shelving around that’s gonna be the worse than even the construction
Sent from my iPhone using Tapatalk
-
The concrete is already dirty
Sent from my iPhone using Tapatalk
-
It happens.
Investigating sealers. Any advice?
Sent from my iPhone using Tapatalk
-
The sealers I have used never last to long. Let me get a picture of what I used
(https://uploads.tapatalk-cdn.com/20201207/358979c22e8a3d76a3c6769ae1895efb.jpg)
It’s held up ok. But time will tell
Sent from my iPhone using Tapatalk
-
Be careful of epoxy as they will work well but make that driveway really slick. The guys who helped with your pool might have a option or two also
Sent from my iPhone using Tapatalk
-
I like Zinsser stuff, will remember they have it.
TRN, not quite secure yet??
-
Well, I lock the man door just to be safe....
Miraculously the purlins I cut loose are too short to re-use. Went to the metal store again....
Feel like Johnny Cash building that 57 Cadillac.
Got the roll up door installed and it took a while to get it tensioned correctly. I got most of the other purlins welded in and have 4 to go.
Ordered ten 8 ft 12,000 lumen LED lights.
Will get the remaining purlins in tomorrow and start moving some shelving to its likely resting place. The sheets will go up quickly when I get them next thursday.
Let the wife be the first to park on the new slab, she likes unloading groceries better on the slab with the easy walkway.
As usual its taken longer and I’m over budget, but that’s just how I roll....
Sent from my iPad using Tapatalk
Where did you order your lights? I have at least 30 8 ft fluorescent light fixtures in the garage. I want to start replacing them as they are a pain in the winter with slow startup and I’ve already broken a couple of bulbs. The idea of the kids breaking one and getting themselves cut up doesn’t make me happy either.
Sent from my iPhone using Tapatalk
-
(https://uploads.tapatalk-cdn.com/20201207/e1fdd455692eecdc2ca0cf04f6839251.jpg)
Charles, stuff I used at last home. Recommend by concrete guy and sold via bobcat dealer. Good stuff
Sent from my iPhone using Tapatalk
-
Quit leaving the chevys on the slab and you won't have any stains?
-
Quit leaving the chevys on the slab and you won't have any stains?
^^^^^^^ what he said....... :popcorn:
-
Quit leaving the chevys on the slab and you won't have any stains?
Wait until you park the cummins there!
-
Well, I lock the man door just to be safe....
Miraculously the purlins I cut loose are too short to re-use. Went to the metal store again....
Feel like Johnny Cash building that 57 Cadillac.
Got the roll up door installed and it took a while to get it tensioned correctly. I got most of the other purlins welded in and have 4 to go.
Ordered ten 8 ft 12,000 lumen LED lights.
Will get the remaining purlins in tomorrow and start moving some shelving to its likely resting place. The sheets will go up quickly when I get them next thursday.
Let the wife be the first to park on the new slab, she likes unloading groceries better on the slab with the easy walkway.
As usual its taken longer and I’m over budget, but that’s just how I roll....
Sent from my iPad using Tapatalk
Where did you order your lights? I have at least 30 8 ft fluorescent light fixtures in the garage. I want to start replacing them as they are a pain in the winter with slow startup and I’ve already broken a couple of bulbs. The idea of the kids breaking one and getting themselves cut up doesn’t make me happy either.
Sent from my iPhone using Tapatalk
Amazon. About 200for a 10pack
Sent from my iPad using Tapatalk
-
Some things that inherently leak a lot also work very well
Take the Chinook for example...
-
Some things that inherently leak a lot also work very well
Take the Chinook for example...
SR-71 fuel tanks...
-
Engine oil pan and transmission pan gaskets...
-
Lights came in
(https://uploads.tapatalk-cdn.com/20201209/b631ace808f87647f71c04a900d25629.jpg)
(https://uploads.tapatalk-cdn.com/20201209/3db1864a4b48b0d83258038c43c483c1.jpg)
(https://uploads.tapatalk-cdn.com/20201209/3bb325e47daca86a53ed938ed3f67ccd.jpg)
Will probably get 2-3 more.
Sent from my iPhone using Tapatalk
-
Do you have a link for the lights? They look Great
-
Will get it. Can’t look at my Amazon account until after my birthday tomorrow. Wife doesn’t want me to see my gifts in order history.
So had some 066 limestone and Calichi mix delivered today
(https://uploads.tapatalk-cdn.com/20201210/95f7c1491de9364352f232cd3017cc37.jpg)
Got it spread and packed. Just need to fine tune the level
Sent from my iPhone using Tapatalk
-
Those lights 12v or AC.
-
So Charles... you and the wife can have separate Amazon accounts but share a “household” Amazon prime account. Makes it easier to keep things separate ;)
-
Will get it. Can’t look at my Amazon account until after my birthday tomorrow. Wife doesn’t want me to see my gifts in order history.
So had some 066 limestone and Calichi mix delivered today
(https://uploads.tapatalk-cdn.com/20201210/95f7c1491de9364352f232cd3017cc37.jpg)
Got it spread and packed. Just need to fine tune the level
Sent from my iPhone using Tapatalk
A calichi mix, fascinating. Never heard of it being sold but I shouldn’t be surprised. I always wondered what it would be like to create small plant to process the stuff into some kind of usable adobo concrete like stuff. It’s available a plenty where we lived in AZ. Hit it all over our lot, 6” down in some spots, 30 or better in others.
How does it hold up in the long term? I’d imagine well because the stuff we uncovered didn’t deteriorate much over the 5 years we lived there.
-
Ryan, I’,m too lazy to explain it to her. She’s not the most technological person.
Turner, its used a lot on farm and ranch roads, particularly in south Texas. This is my first time using it, but in my estimation as long as it doesn’t have standing water on it, the Calichi doesn’t get washed away and it stays packed. Most likely I will come back in at some point and put a thin layer of 066 on top just to keep the dust and mud from tracking on the concrete.
Sent from my iPad using Tapatalk
-
Buy rock, have rock installed, pack rock, dig up well packed rock, pour more concrete, find new place to pile up rock. :)
-
You a berry bad man, Kenneth.....
But probably not too far off. They SB2 limestone road base I had down is still under the concrete. It made for a good hard base.
The path around the side of the shop is SB2 Granite and I like it even better, but its expensive. Eventually that will probably get spread under the foundation for the future shop addition..
Got my R panel today and hope to start on putting it up tomorrow and get the shop closed in. Work keeps getting in the way. It’s dark when I go to work and dark when I get done. Not conducive to projects.
Sent from my iPad using Tapatalk
-
Do you have a link for the lights? They look Great
10Pack 8Ft LED Shop Light... https://www.amazon.com/dp/B07PH64CJJ?ref=ppx_pop_mob_ap_share
Currently show unavailable but there are many similar. I think they are all made by the same chinaman under different names.
Also wrapped up the front including eave and corner trim. On to the back for eave and corner then the box rake along the side roof line
Sent from my iPhone using Tapatalk
-
(https://uploads.tapatalk-cdn.com/20201212/b351b11fab88c20b83c8d02455794ccc.jpg)
Sent from my iPhone using Tapatalk
-
Those would be killer bright under mommas mez
Sent from my iPhone using Tapatalk
-
Nice work Charles :likebutton:
-
Thanks. Got the back done and the corner pieces all done and got one side of the box rake on. Should be able to finish tomorrow
Here is the before photo
(https://uploads.tapatalk-cdn.com/20201213/7c2723610a809312f2ea02caeee1b012.jpg)
Sent from my iPad using Tapatalk
-
Got the box rake pretty much complete this morning just before the rain hit. I can attest that with double the roof area, the sound on the roof is deafening.. No leaks except from under the man door. Have to get my threshold down
Sent from my iPad using Tapatalk
-
Got the box rake pretty much complete this morning just before the rain hit. I can attest that with double the roof area, the sound on the roof is deafening.. No leaks except from under the man door. Have to get my threshold down
Sent from my iPad using Tapatalk
Charles, we always put pink insulation board under the roof panels. Makes life a lot quieter.
-
Yeah, Ive been thinking about that but I need to get ventilation figured out ....
Sent from my iPad using Tapatalk
-
If you don’t have some insulation up there it will be raining on the inside as well as the outside
-
If you don’t have some insulation up there it will be raining on the inside as well as the outside
Thats a good point. Mine is really bad right now with the moisture in the air and lower temps, but I don't have any walls.
-
Spray foam
Sent from my iPhone using Tapatalk
-
They used spray on insulation on the inside of a shop at work. Problem was it had asbestos fibers mixed in it. Had to spray over it all and put signs everywhere warning not to disturb or hang anything against the walls.
-
Spray foam
Sent from my iPhone using Tapatalk
-
It’s not to expensive, here two inches of spray foam isn’t to bad
Sent from my iPhone using Tapatalk
-
Closed cell is the expensive stuff. Open cell is not too bad. If I get another seacan I’ll have it shot so it might be a good time to consider.
I really need some ventilation. The roof mounted passive vents are really expensive so I’m not sure if I want to go that route or a gable vent with a powered fan
Sent from my iPad using Tapatalk
-
Sorry the vents I had viewed are for vans and trailers
Can you do just a regular turtle back vents?
Sent from my iPhone using Tapatalk
-
I could but the low slope of the roof is a challenge and I like the big ridge vents that have an open / close setting If I’m going to insulate and potentially condition
The gables controlled by a humidistat would be ideal if I don’t insulate or condition
Sent from my iPhone using Tapatalk
-
Charles, you need to put something between the metal roofing and warmer moist air or you will be dripping water when air is cooler outside than inside.
-
So dug a trench and started pulling cable to the new sub panel.
(https://uploads.tapatalk-cdn.com/20201223/e7e60a1c972e14eac124eeabb71278ea.jpg)
(https://uploads.tapatalk-cdn.com/20201223/c050dc73e07d7d5e9db643167ea4238b.jpg)
4awg thhn and some 14ga for a light over the door controlled by a WiFi switch next to the porch on the house.
Sent from my iPhone using Tapatalk
-
Got my fill of pulling cable Sunday at my brother's new shop. 2/0x3.....162'. Not fun.
-
Yeah. Gotta remember the lube
I pulled 1/0 150’ to the casita. This was 40 ft. My youngest pulled the fish tape while I lubed and organized and fed the cable. Oversized conduit is a big help. 3 #4 plus 3 #14 in a 1-1/4 was easy.
Sent from my iPad using Tapatalk
-
Yeah. Gotta remember the lube
I pulled 1/0 150’ to the casita. This was 40 ft. My youngest pulled the fish tape while I lubed and organized and fed the cable. Oversized conduit is a big help. 3 #4 plus 3 #14 in a 1-1/4 was easy.
Sent from my iPad using Tapatalk
We used 2.5" conduit, with multiple bends but the spool of cable said "No Lube!!". I didn't know they made non-lube compatible insulation until I saw that. If it was mine I probably would've used it anyway.
I'll quit dotting your awesome thread now....
.. until tomorrow.
-
(https://uploads.tapatalk-cdn.com/20201223/221fa6cbddb6bad0d360d7beaed44602.jpg)
Also picked up this gizmo like a Chinese handcuff. Worked really well. Won’t say I was testing it and got my finger stuck....
Sent from my iPhone using Tapatalk
-
That is a good idea but I think lube would have messed it up.
-
You would think but it grips like crazy. Lube or not
Sent from my iPhone using Tapatalk
-
Asso.. ancient chinese fingers huh?
-
Asso.. ancient chinese fingers huh?
"I Korean you … "
-
So brief update. Bending conduit is fun....not. I’ve gotten pretty decent at it over the years, but bending 3/4 takes more effort. When finished will have 48 110 outlets (twelve 2 gang boxes with duplex recepticles) on four 20amp circuits and six 240V outlets (four 3 wire and two 4 wire) on two separate circuits.
Got about 3/4 of the conduit run and bent and the lighting circuit is done with almost all the LEDs are up and the flood light over the door is in.
Also succeeded in pulling the original service cables out of the old conduit and cut the old conduit off flush with the floor since it now comes up in the middle of the shop.
I now have to completely disassemble the shelving units and re- arrange them along one wall,including the two I made into a work bench, which now will be fun since I screwed them to the metal framing before adding the 2x4s and pegboard... so the lights have to come down, the pegboard comes off and the 2x4s off and then I can remove the screws...unless I can get a long recip blade between the frame and building and cut them loose.
So I moved my parts bins and started moving my chemical cabinet, but the bottom is about rusted out after 15 years so I went to Sams and bought two rolling 36x18x72 inch cabinets which I will now have to assemble....
Still probably 2 weeks away from getting finished organized and a massive trip to the dump to purge junk.
(https://uploads.tapatalk-cdn.com/20201229/eea7f218a7dd0652b9038097237f9dc2.jpg)
Sent from my iPad using Tapatalk
-
You are always churning things out. Wish I had that energy right now.
-
JR you aren’t letting grass grow under your feet either
Sent from my iPhone using Tapatalk
-
JR you aren’t letting grass grow under your feet either
Sent from my iPhone using Tapatalk
Doesn't seem like anyone here has that issue
-
Just know I want to do so much more.
-
Just know I want to do so much more.
Same here. I wish Idaho was a lot closer. Wouldn't hurt to have half a mil to spend there as well.
Guess we'll have to count on this Texan for inspiration.
-
I think we get to many irons in the fire. Progress is slow on each but not as productive, I wish I could finish a few more without starting new ones
Sent from my iPhone using Tapatalk
-
Well up here in mason county wa they take care of all that. 4 months to get a garage permit after waiting a month for a pre app meeting
-
And they wonder why people build without permits
-
I’m still waiting for the city of Winnipeg to get back to me on wether I needed a permit or not for my condo. That was 2017/18...
Was done in a week. Lol
-
(https://uploads.tapatalk-cdn.com/20210102/946a4817a1afd60a173b79208bca1fa7.jpg)
Well destruction phase over and now reassembly and organization begins. Shelves all in their new place and redoing the electric on the work bench section. Going from 3 single duplex outlets to 3 double duplex outlets and led lights in place of the fluorescents. Have quite the pile of trash and junk outside to haul off and hope to get mostly done this weekend so the wife can park her SUV in there when she comes back Monday.
Once all the junk is off the floor and back on the shelves I can finish the other electrical circuits along the back wall.
Then I plan to weld supports on the back wall to make a plywood wall floor to ceiling so I can start hanging metal pegboard which is where a lot of various stuff with no home will reside.
Sent from my iPad using Tapatalk
-
Charles, kind of a cool idea I’ll pass along. My buddy had a lot of shelving units like yours. He took 1” sq tube and made double door door frames to cover front of racks top to bottom. Mounted them at each end of rack with hinges then put metal peg board on the frames. Hung the tools inside the peg board doors. He could open the doors and grab a tool or access the shelf. Super clean and functional, maybe something to consider?
-
Thanks Shawn may look into that. I usually have stuff hanging off the edges.
Made some progress today. Still have the 2000lbs of white oak in the middle of the floor to deal with and have to put up and organize all the workbench stuff that’s on the floor in buckets as well as a few other organizational things before building the back wall and finishing the electrical
(https://uploads.tapatalk-cdn.com/20210103/a75ef6f226a15d7f518c76723ae8e19f.jpg)
Sent from my iPad using Tapatalk(https://uploads.tapatalk-cdn.com/20210103/203a74a3b8191b7aba8f4596823337e8.jpg)
(https://uploads.tapatalk-cdn.com/20210103/1e58caf349345437c5ed424695353b2a.jpg)
(https://uploads.tapatalk-cdn.com/20210103/c9c3c9c2dbc239b18e774d61b598d9ef.jpg)
-
Looks good :likebutton:
-
Way to clean, fix that!
-
You're a freakin dynamo!
That looks great
And
It's been cool just watching this "hidesite/vacation resort of yours grow over the years.
I expect only more good things as we press forward
And send a prayer (to all) that this place of the Texas reddened neck guy never has to use it to hide anything.
-
Thanks Guys.
Wife’s ride fits nicely with room to spare
(https://uploads.tapatalk-cdn.com/20210105/70caaff92fee3507bdaf11a13b83698b.jpg)
Don I dug a big hole with the excavator behind the pond berm to get clay to repair the berm. Left the big hole and now the running joke is that I’m preparing to hide a body
Sent from my iPhone using Tapatalk
-
Thanks Guys.
Wife’s ride fits nicely with room to spare
(https://uploads.tapatalk-cdn.com/20210105/70caaff92fee3507bdaf11a13b83698b.jpg)
Don I dug a big hole with the excavator behind the pond berm to get clay to repair the berm. Left the big hole and now the running joke is that I’m preparing to hide a body
Sent from my iPhone using Tapatalk
Your prepared for the first boyfriend!
-
I think the trick for digging holes. Dig a hole put the mini dig again, cover with concrete, back fill, dig out back fill and plant a tree .
Many of employees got told the same example of the get hurt. “ I don’t know where he is, never seen him here today”
Sent from my iPhone using Tapatalk
-
Well, easier to dig a hole. Trap a couple of pigs in there. Toss Boyfriend. Come back in a few days and shoot pigs or let them loose.
Sent from my iPhone using Tapatalk
-
English Dave?
-
Borrow minX
Dig hole as far as miniX can reach
Drive mini into hole, dig again.
Body>concrete> back fill> dig out of hole> backfill > plant tree > return miniX
We used to tell employees that were accident prone that we would follow that procedure and tell who ever came looking that we never seen them, no call no show that day
Sent from my iPhone using Tapatalk
-
Well, easier to dig a hole. Trap a couple of pigs in there. Toss Boyfriend. Come back in a few days and shoot pigs or let them loose.
Sent from my iPhone using Tapatalk
:likebutton:
-
Well, easier to dig a hole. Trap a couple of pigs in there. Toss Boyfriend. Come back in a few days and shoot pigs or let them loose.
Sent from my iPhone using Tapatalk
:likebutton:
We don’t have wild pigs here just crazy fat ladies at Walmart, I have no desire to trap one of them lol
Sent from my iPhone using Tapatalk
-
(https://uploads.tapatalk-cdn.com/20210117/c2acba9c2f5800cffa5b432e1d928e11.jpg)
Put a cheap pioneer receiver in the shop with some speakers. Organized the stuff on the pegboard and bought 11 sticks of 1-1/2 square tube to build a plywood wall at the end of the shop for metal pegboard and installed the last of the led lights.
Sent from my iPhone using Tapatalk
-
Can you take another photo looking in from the garage door, those lights look amazing and you didn’t have them all up?
Sent from my iPhone using Tapatalk
-
(https://uploads.tapatalk-cdn.com/20210117/6a227e9ccb368723f1548da35b4c6d95.jpg)
Sent from my iPad using Tapatalk
-
You plannin on having to be surg-e-ratein in that space?
-
I freaking love it!!
Sent from my iPhone using Tapatalk
-
You plannin on having to be surg-e-ratein in that space?
Maybe. I may actually add more. As I get older more brighter is more better
Sent from my iPhone using Tapatalk
-
Maybe. I may actually add more. As I get older more brighter is more better
Isn't that the truth!!
Funny, night vision is good but I can't see little things at all.
-
Well got the air hose reel hung and HDPE air distribution tubing and a few other things tidied up.
Then started on the back wall. 1-1/2 sq tube welded to the purlins and 3x4 plate feet. Going to be spaced 48 inch oc and I’ll hang 3/4 plywood. 8x24 feet. Then I can finish the electrical circuits that will run in front and eventuallly hang metal pegboard for misc junk.
(https://uploads.tapatalk-cdn.com/20210119/0123a9aeb0b18a051e0f9df3be014540.jpg)
(https://uploads.tapatalk-cdn.com/20210119/5739284d7507a7987453c086bf6ec69d.jpg)
Sent from my iPhone using Tapatalk
-
No insulation
-
No insulation
You don't need that in the south. They dont get cold.
-
So finished welding the 1-1/2 sq tube frame and got the 3/4 plywood on it. Now I can finish the electrical since it has to run across the face of the plywood wall. Also got to try out my new infinity digital Miller helmet. Where has that been all my life? Much better than my cheap entry level Miller. Now I just need a 2.5 cheater for it.
(https://uploads.tapatalk-cdn.com/20210207/8a825db6258c338c0e16e256ab5b23dc.jpg)
(https://uploads.tapatalk-cdn.com/20210207/83776b96cf1264364a34905758acb1be.jpg)
(https://uploads.tapatalk-cdn.com/20210207/20cc42e519c6e908f119f9b28b25d3dc.jpg)
Sent from my iPhone using Tapatalk
-
Nice helmet
-
Yea, I like that helmet. Seems I am always having issues with the ones I have. Should bite the bullet and opt for one like that Miller.
-
Nice helmet. I really should look at one with the bigger window.
Mines one of the original auto ones and only has the 2” window.
Garage coming along nicely.
You still fighting Rona priced lumber?
-
I have the larger window with auto darkening? Is the digital diff?
-
Yeah, 23/32 CDX sheathing was $39 a sheet.
JR, I believe the digital has some electronic controls like different modes for grinding, cutting etc with just the push of a button. Also tracks arc time and other stuff.
Ordered my cheater lenses for it yesterday so I can stop wearing my readers under the helmet
Sent from my iPad using Tapatalk
-
Does that helmet have a ClearLight lens? Supposed to allow more colors through the lens. Of the few people I have talked to that uses them they have all raved about them.
-
Yes I believe that is the type of lens.
https://www.millerwelds.com/safety/helmets/digital-infinity-series-welding-helmets-m30025
Sent from my iPhone using Tapatalk
-
Nice, but $400,,,,,,,,,
-
Nice, but $400,,,,,,,,,
What value do you put on your eyesight?
For that reason I've never even thought of trying a version from harbor freight, or similar.
-
Would like to try a really good set. I have a Kolbalt now, works greats.
-
Iv been using a harbor freight helmet for what little welding I do, it’s adjustable and I set it usually as dark as I can.
But I also don’t weld hours and hours a day.
Sent from my iPhone using Tapatalk
-
ESAB Sentinel.
If you want 1st hand reviews, we gave a bunch of these away on a sales promotion some years ago and our customers LOVED them.
https://www.weldingsuppliesfromioc.com/esab-sentinel-a50-welding-helmet-0700000800?gclid=EAIaIQobChMI5LjWlLDb7gIVeQytBh1JqAJLEAQYASABEgJCO_D_BwE
-
Shop around. I got mine for $271 from bakersgas.com
Tate those are nice helmets. Some reviews said downside was the expensive curved replacement lenses.
Sent from my iPhone using Tapatalk
-
I went back to a cheap fixed shade. I've tried a couple different brands of auto helmets. I just replace the outer shield pretty regularly and the shade itself a couple times a year and it really helps with my visibility. I go through about a 44lb roll of wire every 2 months or so and the majority of my welding is 12" runs so a fixed shade doesn't bother me as much as somebody who is doing a bunch of short runs.
-
I went back to a cheap fixed shade. I've tried a couple different brands of auto helmets. I just replace the outer shield pretty regularly and the shade itself a couple times a year and it really helps with my visibility. I go through about a 44lb roll of wire every 2 months or so and the majority of my welding is 12" runs so a fixed shade doesn't bother me as much as somebody who is doing a bunch of short runs.
That's the consensus from a couple pro welder friends. They make fun of me for using autos....say that they're for amateurs... which is fine with me. I need all the help I can get.
-
Armature, :likebutton:
-
So were are getting the global warming special this week. Will be 5 degrees at the hide and likely 6+ inches of snow. My old generator from hurricane IKE is not up to the task to run what I need and the 20kW Cummins onan whole house generator I ordered 5 weeks ago has not even shipped yet so I went to Northern Tool and bought an electric start 11000 watt running gen set. Wrapped all the pipes good, sharpened the chains on the saws and gassed everything up and put the saws and chains and straps in the truck and got both 30 gal barrels filled with gas and the Bus topped off with 94 gallons of diesel. And a few bottles of bourbon just in case....(https://uploads.tapatalk-cdn.com/20210214/fc8478d15f79fe67c9f739987153da28.jpeg)
(https://uploads.tapatalk-cdn.com/20210214/2a1462505518426c892e5780161e6611.jpg)
Sent from my iPad using Tapatalk
-
How long have you had the nitto mud G’s on the bus?
Jealous you guys are getting the snow
Sent from my iPhone using Tapatalk
-
They are Ridge Grapplers. 35x12.5x20s. Maybe 20k miles? I’d have to check. Much better than the Terra Grappler G2s I had
I’m fine with the snow but the family back in Houston will have to content with sleet and ice on the power lines and roads and we don’t have but 1 salt truck for 10000 miles of roads...
Sent from my iPad using Tapatalk
-
Good luck with the global warming cool down.
I witnessed some freezing rain events years ago down that way driving.
The lack of winter infrastructure is a real thing.
I threw on a set of chains and left.
Don’t know if it was legal, didn’t care.
Weren’t nobody moving that didn’t have chains.
And the DOT there didn’t know what snow is let alone how to use chains.
Hopefully you weather the storm safely.
Extra bourbon always a good bet.
-
(https://uploads.tapatalk-cdn.com/20210215/bdbc18b6baba799970af156339254d0d.jpeg)
(https://uploads.tapatalk-cdn.com/20210215/21b5474b2bfdd9ea1f79b02afe5809b7.jpeg)
(https://uploads.tapatalk-cdn.com/20210215/3599acfecb2ab8a2d87fb27e6e1b6e05.jpeg)
(https://uploads.tapatalk-cdn.com/20210215/79c0cdd972af121eeb00687b6ab38f4f.jpeg)
2 storms with 6 inches of snow in less than 5 weeks.....
Sent from my iPad using Tapatalk
-
That looks like it’s time to figure out how to heat that pool and go for a dip Charles
Sent from my iPhone using Tapatalk
-
(https://uploads.tapatalk-cdn.com/20210215/60eb7a00e8dd8dcdf389350e8efbbd94.jpg)
Sent from my iPhone using Tapatalk
-
Heck thats pefect. Enough to play and look pretty. Plus you can still drive around and it doesn't shut things down. About like we get at the Ridge, but Tx's?
Funny how whenever there is snow around population areas its a "storm", think it is just "winter" like happens every year. Sometimes more, sometimes less.
-
The effect shown here of all this global warming means Biden probably needs to double down on the Paris climate accords. Place a few more job and energy killing regulations in place before the snow gets too deep to move!
-
We got our share also
-
Things are getting a little racy here now. Near zero temps are over but we won’t see above freezing for a few more days. Today we got ice and freezing rain. When I’m outside all I hear is trees and limbs snapping and dropping all around. I’m beginning to doubt we make it out with out damage. As soon as this is over I’m cutting every tree close to a structure. No more tree hugging wife to keep me from cutting. Too risky.(https://uploads.tapatalk-cdn.com/20210217/55df263e6d3ad142ba6685c9865e70f7.jpeg)
(https://uploads.tapatalk-cdn.com/20210217/a6836e2aa2ff7f0d4abc3a2195050e23.jpeg)
(https://uploads.tapatalk-cdn.com/20210217/c2a9c79b9e1dfab64d13ebb458cab599.jpeg)
Sent from my iPad using Tapatalk
-
A few trees look too close. What temp is the pool??
-
Well Charles you have some work in front of you. I agree with you however, easier to take them down than take them off. Some would say to just open them up to allow the wind to pass through but one limb through the roof causes lots of problems. I will be trying to work with our county to be able to remove trees here. They or the state designated the trees between our house and the beach as natural buffer area. I believe state law says any tree within striking length can be removed. My problem is the wind more often than not blows from the beach toward the house. Yes they may have root system to hold them up but larger limbs don’t care about that. Tough call but you are right, darn trees can always cause a fight.
-
Bob, at the moment, at least, I don’t answer to anyone (other than the wife) on what I want to do with my property. I will likely rent a 60 ft self propelled boom lift to get them all down.
JR. the pool is 37 degrees. Just right for a dip....
Sent from my iPad using Tapatalk
-
I used a tow behind lift to get some trees last fall. It wasn't too bad moving it with the tractor and a good bit cheaper.
-
That pine above the garage sure looks sketch. ... would be a terrible kick in the gut after all that work, especially doing the work yourself.
-
(https://uploads.tapatalk-cdn.com/20210219/9d3c57bb29bfa4bfcf29ba4522742a4d.jpg)
Lots of ice no power no internet.
No significant structural damage yet and the pool equipment hasn’t completely frozen. So I counted all a blessing
Sent from my iPhone using Tapatalk
-
A little foresight goes a long way.
-
(https://uploads.tapatalk-cdn.com/20210312/3d58a77184e8752d0a8dc45ad68189a0.jpg)
Sent from my iPhone using Tapatalk
-
Cummins poweded!! More,,,,,,
-
You will never regret that purchase.
-
You are probably right, Bob. 20kW LP gen set. Now the real work begins with pouring a pad and trenching for LP lines and wiring all this mess. It has an auto transfer and a dual 50amp load shedding panel so the pool and the main house AC can drop off and be picked back up automatically if needed.
Sent from my iPad using Tapatalk
-
Very nice Charles. Well worth the cost and work to get it setup
-
East part done. Unloaded and slab poured.
(https://uploads.tapatalk-cdn.com/20210313/38507d45c0fcc1e08ed1cd670b5de2c7.jpg)
(https://uploads.tapatalk-cdn.com/20210313/7aeabf0bf75173e1773c0d5c224622f7.jpg)
Sent from my iPhone using Tapatalk
-
Looking forward to a total cost of this, I wired my home to add a Gen set, but we haven’t had many of the power outages that my home I grew up in did.
Sent from my iPhone using Tapatalk
-
Well so far with the gen set auto disconnect and load shedding panel and slab I’m in for about $5600
Sent from my iPhone using Tapatalk
-
That’s not terrible considering your peace of mind and household comfort I would think
It will power everything but the pool you said?
Sent from my iPhone using Tapatalk
-
That a good choice with LP. A lot of people around here got hooked up with natural gas when the pipeline went through a few years back. They are finding out that its not a resource that will always be there. There was pipe rupture that dropped pressure to near nothing. And then this recent storm skyrocketed prices. I was shown a bill that is normally $3,000. Last month it was over $12,000.
Get a 1,000 gallon tank and fill er up.
-
Well the easy part is over. Time to start digging
(https://uploads.tapatalk-cdn.com/20210321/15fd9a2999e2e591f13734770be5a90f.jpeg)
Last two outlets wired. Electrical in the shop complete.
(https://uploads.tapatalk-cdn.com/20210321/5df3d66d69aeba828d6e37283203813b.jpeg)
Sent from my iPad using Tapatalk
-
Very nice Charles :likebutton:
-
Me likes too!
-
Today I started cleaning and organizing the shop since I had finished the electrical. Still not finished but getting there.
Made a rack for all my wire spools. Got a chance to use my new plasma circle guides from 911 motor sports. Worked like a charm to cut 3/4 holes for the conduit to go through the standoffs
(https://uploads.tapatalk-cdn.com/20210322/dc555ae4e80526898ba6c4e68bef0788.jpeg)
(https://uploads.tapatalk-cdn.com/20210322/af7e409cab8548a6e5773d788624687e.jpeg)
(https://uploads.tapatalk-cdn.com/20210322/1dd3d9f17cb9430c920d540d7023efe1.jpeg)
Sent from my iPad using Tapatalk
-
OOOO, nice rack Charles,,,,,,,,,,,,,
-
OOOO, nice rack Charles,,,,,,,,,,,,,
Look at all of that room for activities
(https://media3.giphy.com/media/1BGRdWpe1auzG63NeC/giphy.gif)
Sent from my iPhone using Tapatalk
-
You worry me Dave,,,,,,,,,,,,,,
-
That was a good show come on
Sent from my iPhone using Tapatalk
-
That was a good show come on
Sent from my iPhone using Tapatalk
I'm with you. Never, under any circumstance, touch my drum set! LOL!
-
That was a good show come on
Sent from my iPhone using Tapatalk
I'm with you. Never, under any circumstance, touch my drum set! LOL!
Did we just become best friends?
Yep
Sent from my iPhone using Tapatalk
-
:beercheers:
-
Sounds like you 2 should go on the overland trip together,,,,,,,,,,,,,,,,,,
-
In the same van...
And here are the stencils I got. Love these things. At least on thinner stuff. We’ll see how they work on thicker stuff
https://www.911motorsports.net/Circle-Stencils--Plasma-Cutter-Guide--5pc_p_12.html
Sent from my iPad using Tapatalk
-
Sounds like you 2 should go on the overland trip together,,,,,,,,,,,,,,,,,,
I second the motion...All in favor say aye...
-
In the same van...
And here are the stencils I got. Love these things. At least on thinner stuff. We’ll see how they work on thicker stuff
https://www.911motorsports.net/Circle-Stencils--Plasma-Cutter-Guide--5pc_p_12.html
Sent from my iPad using Tapatalk
OOH, I'm gonna get those!
-
In the same van...
And here are the stencils I got. Love these things. At least on thinner stuff. We’ll see how they work on thicker stuff
https://www.911motorsports.net/Circle-Stencils--Plasma-Cutter-Guide--5pc_p_12.html
Sent from my iPad using Tapatalk
OOH, I'm gonna get those!
They ship fast too. I plan on getting all the stencils eventually..
Sent from my iPad using Tapatalk
-
Sounds like you 2 should go on the overland trip together,,,,,,,,,,,,,,,,,,
I second the motion...All in favor say aye...
:likebutton: :likebutton: :likebutton:
-
So having set the generator on the pad it was time to get busy with a shovel. Manual labor time.
(https://uploads.tapatalk-cdn.com/20210412/36cd81b0ae6b6b48d6e60f2344c6a713.jpg)
(https://uploads.tapatalk-cdn.com/20210412/369810a635fc02ca23c99fd4d04306d2.jpg)
(https://uploads.tapatalk-cdn.com/20210412/6340e98a4a8363d0f6ccfd97678385ad.jpg)
(https://uploads.tapatalk-cdn.com/20210412/85a9168d3ee6cbeb2afaffcd665d2d20.jpg)
(https://uploads.tapatalk-cdn.com/20210412/88969e025b8292cf69f5570dfe459f32.jpg)
I found electrical, comms, and water to casita. Electric to septic. Electric to pool. Pool light conduits. And all 8 2 inch pipe for the pool. Intertwine that with some serious roots and that’s why I couldn’t use heavy equipment. Way too much stuff to damage.
Sent from my iPhone using Tapatalk
-
(https://uploads.tapatalk-cdn.com/20210412/1e2d157f98f58059f725472666c638b9.jpg)
(https://uploads.tapatalk-cdn.com/20210412/eed4473c8001285ee01312bf6f2617aa.jpg)
(https://uploads.tapatalk-cdn.com/20210412/351652804e91bc1b17ed9b1b91786e52.jpg)
(https://uploads.tapatalk-cdn.com/20210412/5b0ef1db4ef0b49d03300aa57670bfb6.jpg)
(https://uploads.tapatalk-cdn.com/20210412/3ee9ad5dd16266464d1563e7532d8754.jpg)
So first pic is where I tied into the line going to the pool heater.
What is not shown is the copper wire run with the poly pipe. Code requires it so it can be detected.
Pressurized and monitored for 15 minutes. No loss of pressure.
Covered it all up and smoothed it out.
Next up. Final connection to gas and the conduit for electrical and comms and wiring the transfer switch and load shedding center.
Sent from my iPhone using Tapatalk
Fixed your thumb,,,,,,
-
Hell that looks wet and sticky
Ya have to scrape the shovel off each scoop kinda diggin
Sent from my iPhone using Tapatalk
-
Dave its about as ideal as it gets for red clay. Too wet and its a mess. Too dry and its like concrete. Another month in Texas and it would have been like concrete, needing a jackhammer.
Sent from my iPad using Tapatalk
-
Hey, at least he is not wearing man slippers! Thumb is a tad big,,,,,,,,,
You don't put tape in on top? Thought that was required to?
-
Not sure I’m tracking on the tape part...
Non metallic piping just requires a copper wire, per Tx Railroad Commission
But then not much out in the country is up to code. Those electrical conduits being 6 inches underground is no bueno but I know to be careful and I know generally where the stuff is.
Sent from my iPad using Tapatalk
-
Caution tape, closer to the surface.
Next time someone digs, hopefully hit the tape before the pipe.
-
Caution tape, closer to the surface.
Next time someone digs, hopefully hit the tape before the pipe.
Yep, so when someone digs without knowing where or calling the pipe locators its like, hey there might be something under this tape!
-
Ok. More progress on the generator
(https://uploads.tapatalk-cdn.com/20210530/048e288ca27c803f5cf59a77a04012c1.jpg)
(https://uploads.tapatalk-cdn.com/20210530/c853c63deadd6c008aa8e4844889114b.jpg)
(https://uploads.tapatalk-cdn.com/20210530/5382009a2ddc8c18902d73fa5c59b6bb.jpg)
(https://uploads.tapatalk-cdn.com/20210530/1ae64bbcfef3c96a2552fdcee4be789a.jpg)
Since I’m saving money installing my self I get to buy tools.
Bought a hydraulic hole punch kit for punching holes in the electrical panels.
Works amazing and no shavings.
Got the transfer switch panel mounted and the conduit run to the main panel. No pic yet but got the conduit run all the way to the generator and the wires pulled. Have to do the connections and finish the gas connection.
Then buy a battery, mount the load shedding switch and then have to pull the meter to move over the mains.
Sent from my iPhone using Tapatalk
-
isn't rule 97 of the man card handbook is that for each new project you must buy 1 new tool?
-
isn't rule 97 of the man card handbook is that for each new project you must buy 1 new tool?
Absolutely correct.
Gotta love the hydraulic knockouts.
-
Only 1, :sad:
-
Gas connected and most connections made at generator. Need to anchor it to the slab and connect the Ethernet cable and a few low voltage signal wires.
The load shedding panel I bought was not nema3 rated for outdoors so I ordered a nema3 enclosure to transfer all the guts to.
Once that gets here I’ll wire that and then it’s just pulling the mains and transferring over and hope it doesn’t go up in smoke. (https://uploads.tapatalk-cdn.com/20210531/42b34eb9c0297589a398b3c18a037991.jpg)
Sent from my iPhone using Tapatalk
-
Letting the smoke out is usually never a good thing. At some point I need to upgrade our system. Ours is a manual switchover now, and the generator is mounted in the garage with exhaust plumbed to the outside. Very nice job on the install Charles, sorry you have to change out the box.
-
(https://uploads.tapatalk-cdn.com/20210601/ed3280c2e35a7a18e32cb13e342e0e0d.jpg)
Here is where I left it today. Low voltage wiring to the ATS complete, Identified ground and neutral (kind of important). Drilled and secured the gen set with concrete anchors, terminated and connected the Ethernet cable.
Now just need a battery, the load shedding panel replacement box and connect the load shedding panel before pulling the meter.
Talked to my electrician friend and he said I should be able to pull the meter and replace it myself. I was concerned that since it is monitored over the lines, that they would not reactivate if I pulled it. If they give me grief he said to tell them he did it.
So that means that I’ll be pulling the meter and making the connections in the next couple of weeks. Girls are having a few friends up right after school is out next week so I don’t want to pull it and find out that the won’t connect it just as the girls are having their friends up so i will wait until that’s over.
That wall is starting to look pretty busy...
Sent from my iPhone using Tapatalk
-
(https://uploads.tapatalk-cdn.com/20210601/ed3280c2e35a7a18e32cb13e342e0e0d.jpg)
Here is where I left it today. Low voltage wiring to the ATS complete, Identified ground and neutral (kind of important). Drilled and secured the gen set with concrete anchors, terminated and connected the Ethernet cable.
Now just need a battery, the load shedding panel replacement box and connect the load shedding panel before pulling the meter.
Talked to my electrician friend and he said I should be able to pull the meter and replace it myself. I was concerned that since it is monitored over the lines, that they would not reactivate if I pulled it. If they give me grief he said to tell them he did it.
So that means that I’ll be pulling the meter and making the connections in the next couple of weeks. Girls are having a few friends up right after school is out next week so I don’t want to pull it and find out that the won’t connect it just as the girls are having their friends up so i will wait until that’s over.
That wall is starting to look pretty busy...
Sent from my iPhone using Tapatalk
Man, that looks 1. Pretty busy 2. Like it needs its own enclosure, 3. Where I'd aim if I was shootin' up the place
Are things getting pretty complex or is it just me???
But like all things Tex, perfectly executed!
-
Yeah, its a bit busy. 200 amp main panel. Conduit out the main panel feeds:
100 amp sub panel on the Casita
90 amp sub panel in the shop
50 amp service to the pool equipment
20 amp service to pond for aerator and electrical
20 amp service to septic
Left over small conduit to the shop where the original 50 amp service was
20 amp service feeding GFCI/ flood light and sprinkler controller
And soon another 20 amp service to the generator for the charger and associated equipment.
Not including the new connection to the transfer switch.....I think I have about reached the limit
Sent from my iPad using Tapatalk
-
As long as there is room and a drawing or marking showing where stuff goes, all is good
-
Creeping closer to P day (pulling the meter day)
I received my NEMA 3 enclosure and transferred the electromagnetic relays to it and got it mounted. Punched the holes with my handy dandy hydraulic punch tool.
Then after figuring out that to load shed the AC i need a 60 amp rated relay, I had to order a new relay. Now that I know how this all works I would have been much better off building my own. 12v coil activated relays are about $30 each and I paid 100 for the enclosure. The “kit” was $300.
In any event, I plan to pull the meter and make the connection from the mains to the ATS and the ATS to the house next Tuesday. Even if I can’t finish the load shedding wiring, getting the mains switched over will allow me to run the generator with just the risk of tripping the breaker if too many loads come on line.
I used the clamp on amp meter to test circuits and the main feed and with the oven, dryer, pool and AC running all at the same time it was pulling 76 amps and the unit is rated for 83. The only time I think I might have an issue is during the coldest winter months if the electric supplemental heat kicks in to supplement the heat pump.
Sent from my iPad using Tapatalk(https://uploads.tapatalk-cdn.com/20210615/867113022b51edbc0d18681339d803a6.jpg)(https://uploads.tapatalk-cdn.com/20210615/e0e29e4cfe101a042a1259a8a5e5d1ca.jpg)
-
That is one busy wall. The writing really helps understand it all.
-
(https://uploads.tapatalk-cdn.com/20210616/8f3f331e55cfdb3a202644ef60ad6239.jpg)
I think the only thing you are missing is one of these on your wall.
Sent from my iPhone using Tapatalk
-
Just needs a kitchen sink!!
-
Yeah, makes me wonder what its going to look like when I retire and go grid tied solar as well with about 30 panels
Sent from my iPad using Tapatalk
-
(https://uploads.tapatalk-cdn.com/20210620/6b6d5900453739067633ee0f31de9dc3.jpg)
My new 80 amp rated relay came in so I swapped out 1 of the 50 amp relays for the 80 and made the final connections from the load shedding panel.
If the generator senses a voltage drop it will send a 12V signal to the relay and take one or both loads off line until the generator has enough capacity and then it de energizes the coil and the relay drops back to bring those loads back on line.
I have the pool and the AC on them.
That is the last of the connections except the final one which is disconnecting the power from the meter and moving the feed from the meter to the transfer switch and then from the switch to the main panel. I plan to do that Tuesday after the family leaves since the power will be off for an hour or two.
Then and only then will we know if i got all this right.
Sent from my iPhone using Tapatalk
-
I would venture a guess you are worried about nothing. All will work just like it should.
-
Nice setup. Even the backup has a backup.
-
So as winter approaches I’m focused on a few projects that involves welding.
Before I can really get serious I need to replace the cardboard and plywood welding table with something more suitable.
Bought 2 sticks of 3x3 tubing which I will turn into the frame. Most likely a 3x5 table with a 3/4 inch plate steel top.
But the wheels showed up today.
(https://uploads.tapatalk-cdn.com/20211102/6d81ea488d625be95d6a33727e0997ea.jpg)
I believe these were rated 900 lbs each. Got two with brakes. And the wheels are red…..
Sent from my iPhone using Tapatalk
-
Funny, I have been looking for a 4x4 table for home. Just a 1/2 plate is $300.
-
So here’s the finished table sans top and I’m looking at adding drawers and a shelf underneath.
(https://uploads.tapatalk-cdn.com/20220108/805a5d7d9ad092b4a38075fa6ef4c5f0.jpg)
And upgrading the cutting torch.
Old
(https://uploads.tapatalk-cdn.com/20220108/00ce1ee6d479a434baada43c5e5605d5.jpg)
New
(https://uploads.tapatalk-cdn.com/20220108/7fe1e162400fc8bcc5d6c9c482c8af23.jpg)
#4 and a 251. Victor journeyman set up with rosebud inbound from cyberweld
Upgraded the ground on my little promig 180. From #4 to 1-0 with a brass clamp
Hydraulic crimp, solder and heat shrink
(https://uploads.tapatalk-cdn.com/20220108/2bff8a8abbd4b4e31a6126c29890eb62.jpg)
(https://uploads.tapatalk-cdn.com/20220108/c53bb9953bed8748e33aab293bf4a777.jpg)
Sent from my iPhone using Tapatalk
-
And started on a fire pit grate to get the wood up and air circulating.
Some #6 rebar but I ran out of gas.
(https://uploads.tapatalk-cdn.com/20220108/c59ecc622ec88e806a2402847a10c16d.jpg)
(https://uploads.tapatalk-cdn.com/20220108/3efd147d0047eb28e335466052d4e510.jpg)
Sent from my iPhone using Tapatalk
-
I get a photo of what your fire pit looks like? Are you gonna cook on this?
Sent from my iPhone using Tapatalk
-
Looking good Charles :likebutton:
-
Table looks good.
I used rebar once for a fireplace. Had to replace it. Just sagged with little use. Strong stuff, but it doesn't like heat like that.
-
Table looks good.
I used rebar once for a fireplace. Had to replace it. Just sagged with little use. Strong stuff, but it doesn't like heat like that.
Technically rebar is chit, made from junkiest metal they can find to melt down. I was bending some 3/4” diameter up into L shapes when I was 18 in a steel shop and the bar I was hand bending in a hossfeld bender broke. I went head over heels backwards into a pile of junk……
Should work just fine for ya Charles! :tongue:
-
Nope Dave, no cooking. Just getting the fire up off the floor. It will be roughly 27x27 and about 6-7 inches tall. Ill have 3 pair of “feet” to keep it from sagging and then
Cross bars will be bent up at the ends like this.
(https://uploads.tapatalk-cdn.com/20220108/a0843b0385d4546bbced1fcbd2d1b5d0.jpg)
Here is the pit Dave, ID is 39 inches
(https://uploads.tapatalk-cdn.com/20220108/b516c058200a7391d14cf80273f2f390.jpg)
-
I’m with ya now, I want to build one that I can swing over my pit to cook on
Sent from my iPhone using Tapatalk
-
I’m with ya now, I want to build one that I can swing over my pit to cook on
Sent from my iPhone using Tapatalk
I would like do the same for the ridge. BBQ is fine but fires are nice too, why no cook.
-
So today, I got rid of the one little light fixture in the stairwell and added a canless LED gimbal and a second one.
(https://uploads.tapatalk-cdn.com/20220110/aeb82de072bc99f660c9e8858c60c8ae.jpg)
Then I got a small 26 inch cheap tool box from HF to put in the seacan to hold knife stuff, flashlight stuff and glock and AR parts. Need to dig out a few more knives from storage
(https://uploads.tapatalk-cdn.com/20220110/f42edada70275359605171c7e45e16ba.jpg)
(https://uploads.tapatalk-cdn.com/20220110/711d2241b2ebb1c4addaea483ef72d6b.jpg)
(https://uploads.tapatalk-cdn.com/20220110/903ecb73aad61096909a7508e1f81efd.jpg)
(https://uploads.tapatalk-cdn.com/20220110/7cbfa91445defe814fc73eb1451ec5f8.jpg)
Sent from my iPad using Tapatalk
-
(https://uploads.tapatalk-cdn.com/20220110/96cd99dace6a76260375bd1c90ed4bca.jpg)
(https://uploads.tapatalk-cdn.com/20220110/9683921e3b5335edd5e6be4a63a478df.jpg)
(https://uploads.tapatalk-cdn.com/20220110/417a74f826497ab6164837306118089b.jpg)
Sent from my iPad using Tapatalk
-
:likebutton:
-
Ok back to building the fireplace grate. #7 rebar support and #5 cross pieces. Three sets of support cross braces/legs and 6 grate pieces. Measures about 26 inches square.
(https://uploads.tapatalk-cdn.com/20220117/4d4a5cbe79014b833e29ff4a5a4abcaa.jpg)
(https://uploads.tapatalk-cdn.com/20220117/ebf81f6c07632c8fdabb0b22944d6a3a.jpg)
Sent from my iPhone using Tapatalk
-
Looks fantastic!! I need to do something for my big bowl, it struggles with air flow
Sent from my iPhone using Tapatalk
-
It’s getting the workout so well see if its going to bend.
(https://uploads.tapatalk-cdn.com/20220118/894534c76d56f487b2265312bd4c5f6c.jpg)
Sent from my iPhone using Tapatalk
-
Very nice, I need a pit its cold now!
-
^^^^^ So nice!
I'm prioritizing one of those down on my farm for the springtime
-
Aftermath. Looks solid still
(https://uploads.tapatalk-cdn.com/20220118/142b2a7463860e523d7fcf45c116fed5.jpg)
Sent from my iPhone using Tapatalk
-
Fine job!! Well done!
So did you get the fire roaring enough to make the rebar glow?
Sent from my iPhone using Tapatalk
-
So its been a while since I’ve updated anything.
Bought two 36 inch culverts and put them in the wet weather creek and started hauling aggregate.
16 yards so far and still need at least 8-12 more.
(https://uploads.tapatalk-cdn.com/20231015/1bf8becd0e63e8ad35500f614abfa606.jpg)
(https://uploads.tapatalk-cdn.com/20231015/6bc589511170059df0e33790eb3deff3.jpg)
First time ever having the tractor to the back half of the property. Now I can get after some real trail maintenance.
Sent from my iPad using Tapatalk
-
And while I’m at it. I found a very heavy duty piece of industrial cardboard for the top of the welding table
(https://uploads.tapatalk-cdn.com/20231015/e7a6557a88c37cf000d60ea41a79303a.jpg)
(https://uploads.tapatalk-cdn.com/20231015/543455cf6247db5c217e5d66d163cb99.jpg)
(https://uploads.tapatalk-cdn.com/20231015/0755681306d0e9e1460c40d71abc7bc4.jpg)
Don was right, cardboard works very well.
Now just need to get the mid 1940’s Wilton vice that I inherited from my grandfather mounted.
Shawn gave me some good ideas for getting it fully restored, which is on the list
Sent from my iPad using Tapatalk
-
(https://uploads.tapatalk-cdn.com/20231016/a8290210a31f140799108607f816b768.jpg)
Sent from my iPad using Tapatalk
-
Cardboard?
-
Nice job Charles :likebutton:
Have you float tested the tractor yet? :popcorn:
-
No but i got up on 3 wheels with a bucket full of rock going into a downhill turn….
Sent from my iPad using Tapatalk
-
No but i got up on 3 wheels with a bucket full of rock going into a downhill turn….
Sent from my iPad using Tapatalk
Sounds like a good time.
Be careful once you’re on two wheels…
More access equals a lot more work.
But tractor will make it all better.
-
And while I’m at it. I found a very heavy duty piece of industrial cardboard for the top of the welding table
(https://uploads.tapatalk-cdn.com/20231015/e7a6557a88c37cf000d60ea41a79303a.jpg)
(https://uploads.tapatalk-cdn.com/20231015/543455cf6247db5c217e5d66d163cb99.jpg)
(https://uploads.tapatalk-cdn.com/20231015/0755681306d0e9e1460c40d71abc7bc4.jpg)
Don was right, cardboard works very well.
Now just need to get the mid 1940’s Wilton vice that I inherited from my grandfather mounted.
Shawn gave me some good ideas for getting it fully restored, which is on the list
Sent from my iPad using Tapatalk
Looks like they compressed it too much, probably won't work very well...But you can always overlay with MDF...;-)
-
Finally got to work on the engine stand.
(https://uploads.tapatalk-cdn.com/20231023/69d535ab4517bd37663536d00aa393ef.jpg)
(https://uploads.tapatalk-cdn.com/20231023/290e9ea959e9e04e1b298333541c5173.jpg)
(https://uploads.tapatalk-cdn.com/20231023/c977f48f5eda8ebd567c15b34677014e.jpg)
Roughly finished. Need a handle to rotate. Maybe throw some paint on it and find a tray for the underside. Trim the tails on the spindles and call it good enough.
Sent from my iPad using Tapatalk
-
Creative!
Nice work for a "white Collar guy"
Whoa!!!!!!!! ;-)
-
Lol. Don’t tell anyone….about the white collar thing. Don’t want to ruin my image and have my red neck card revoked.
Sent from my iPhone using Tapatalk
-
Lol. Don’t tell anyone….about the white collar thing. Don’t want to ruin my image and have my red neck card revoked.
Sent from my iPhone using Tapatalk
Type "H" personality for sure
Actually a type "A"
Who has somehow learned to temper all that and fit into the type B world
Without losing sight of who you really are
And having retained all common sense
With the keen ability to sort (quickly) through the day to day BS
and make good decisions
Without numbskulls ever being aware they are being shown the door
While retaining all useful "Country-boy" skills
That you have honed over the years
In the shadows so as not to alarm the alarmists
and now
Find yourself very close to closing the loop
To where you:
Chuck the dress shoes and tie
and finally
Don your the cowboy boots
Which have never been far away
for the rest of your life.
You, sir, are the one who "fooled" all of them
Well done!
-
(https://uploads.tapatalk-cdn.com/20220110/9683921e3b5335edd5e6be4a63a478df.jpg)
Sent from my iPad using Tapatalk
If you decide you don't like that Surefire M951 hanging on the front of a rifle or taking up space in your toolbox, I'll give it a home. I used one on a few deployments and like them.
Just saying, I can help you out, since you'll be able to get a newer, fancier brighter light. :beercheers:
-
^^^^^^^^^^^^^^Sounds like a sincere/good offer to help store the thing, Tex!
-
Hmm. Maybe a few others you’d like. I like my M4 Devastator with the LED conversion just as much.
Sent from my iPhone using Tapatalk
-
Hmm. Maybe a few others you’d like. I like my M4 Devastator with the LED conversion just as much.
Sent from my iPhone using Tapatalk
I like stuff. But there's just something nostalgic about the M951.
-
Yeah it’s pretty cool.
If I ever get rid of it you’ll be at the top of the list
Sent from my iPhone using Tapatalk
-
Yeah it’s pretty cool.
If I ever get rid of it you’ll be at the top of the list
Sent from my iPhone using Tapatalk
:likebutton:
-
(https://uploads.tapatalk-cdn.com/20231220/75bbb220cee39b42766d89192f0b55f1.jpg)
(https://uploads.tapatalk-cdn.com/20231220/964c80dac1627d92c57a4323d0846b3d.jpg)
(https://uploads.tapatalk-cdn.com/20231220/6ac60396f2d2a66cce2dfdf45ae7d185.jpg)
18T of rip rap spread. Now just some road base or fines to smooth the top. it’s about a 12-13 foot wide area that’s safe to drive almost anything on.
Sent from my iPad using Tapatalk
-
About ready to use
-
Nice :likebutton:
I hauled another 30 yards of pit run today. Backside of shop is almost ready for top layer of 3/4-1” minus crushed.
-
(https://uploads.tapatalk-cdn.com/20231220/75bbb220cee39b42766d89192f0b55f1.jpg)
(https://uploads.tapatalk-cdn.com/20231220/964c80dac1627d92c57a4323d0846b3d.jpg)
(https://uploads.tapatalk-cdn.com/20231220/6ac60396f2d2a66cce2dfdf45ae7d185.jpg)
18T of rip rap spread. Now just some road base or fines to smooth the top. it’s about a 12-13 foot wide area that’s safe to drive almost anything on.
Sent from my iPad using Tapatalk
That looks good/solid
Concur, I would get on that with my track-steer in a second.
BTW, you need one of those...
-
Everyone needs a skid steer…..
-
Everyone needs a skid steer…..
Just like your first Pick up truck. You soon realize you CANNOT do without one.
Maybe we should caution people NOT to buy one...
-
Nah, I’m on my second. Probably be buried in this one!
-
Nah, I’m on my second. Probably be buried in this one!
I was digging in a grub pile that I had stacked up with my excavator, once, which collapsed on me inside the machine!
Be careful what you speak into your future... :-0
-
Long story, but I almost lost a rented tracked skid loader in a big hole once. Was able to use bucket and push myself back away but it was pretty hairy for a good couple minutes. Fortunately, owning one and operating one on construction sites years earlier I was able to save it….
Sent from my iPhone using Tapatalk
-
Yeah, my youngest thought the gehl could go anywhere being 4x4 (I had a moment or 2) and he got really stuck in soft soil. Took a few attemps, but he got out with the bucket.
Getting a tracked unit stuck take practice, big hole you said?
-
Yeah, my youngest thought the gehl could go anywhere being 4x4 (I had a moment or 2) and he got really stuck in soft soil. Took a few attemps, but he got out with the bucket.
Getting a tracked unit stuck take practice, big hole you said?
Tracked units on slippery stuff are useless. I first noticed it a century ago with my M60A1 tank. It was useless on snowy Germany roads. It took the frozen dirt beneath thin snow in the fields to give us any traction.
My SVL-95 and now my SVL-87 are 12,000 lb bobsleds on wet slopes. They always seem to want to slide downhill and will spiritually seek out mud holes, sink holes, well, any holes, really!
-
Yeah, my youngest thought the gehl could go anywhere being 4x4 (I had a moment or 2) and he got really stuck in soft soil. Took a few attemps, but he got out with the bucket.
Getting a tracked unit stuck take practice, big hole you said?
Think quick sand, muddy water laden new fill. It’s was sketch, had I dropped it in that hole it would have needed large equipment to remove it…..
-
Screw in studs for winter.
-
So perhaps you guys might like my rednek engineering here.
Making a farm table for the outdoor kitchen and using white oak beams from the ranch that have been milled and drying for 4 years.
Of course some bowing and warping made them not sit flat when i put them on the base. No one had a planer that could handle these so after much consideration, I built a slab flattening jig with some 2x4 square tubing that I was going to build another firewood rack. Split a piece of 4x4 square tube, added ball rollers and connected those with angle for the router sled. 2 inch flattening bit and 4 passes later, I had taken 1/2 inch off in some places and nearly none in a few others and now it is perfectly flat.
(https://uploads.tapatalk-cdn.com/20240101/0023a92385eb21281c7b175e59e21bb2.jpg)
(https://uploads.tapatalk-cdn.com/20240101/7eb33bf1fe2bd3375c6fac60296e1abe.jpg)
(https://uploads.tapatalk-cdn.com/20240101/5ead842f1dcb8cefe61ed8af03273fa5.jpg)
(https://uploads.tapatalk-cdn.com/20240101/d1a5d93eb375845fc209ae73ac44ee90.jpg)
(https://uploads.tapatalk-cdn.com/20240101/cc13859f482e8cf683919cfe6b258fe4.jpg)
(https://uploads.tapatalk-cdn.com/20240101/390b93d907d901707c4dd06af680e411.jpg)
Sent from my iPad using Tapatalk
-
Now, that's kind of interesting.
So you just use a common router to mill that plank bit by bit. Hmmm, lots of labor but in the end you actually have a usable slab.
I like that :likebutton:
-
Now, that's kind of interesting.
So you just use a common router to mill that plank bit by bit. Hmmm, lots of labor but in the end you actually have a usable slab.
I like that :likebutton:
And could be CNC capable with a few more bits added to the sled.
Well done sir!
-
Looks like it came out nice.
-
Very nice work.
-
Not too shabby for a rednek executive……. :likebutton:
-
Thanks guys. Don, they sell these set ups (albeit a bit smaller) with linear bearings, stainless round railes and dust collection, but those were $800-$1000 and weren’t big enough for my use. Basic idea is to use a 2 inch flat router bit at a fixed height and remove material above that height.
I have $16 in those cheap roller bearings from HF.
Design set up execution and take down in less than 8 hours.
If I was doing this more often I’d invest in some additional bits, which I may later as I have some wide red oak slabs that are about 28 inches wide and 6 ft long that have been drying for 4 years. Haven’t decided what to with them yet, but I have proof of concept and can easily replicate as I kept the sled parts. Just have to make new rails.
Sent from my iPad using Tapatalk
-
These are similar to what one of my buddies has for his sled.
You’d need a pair of these and a pair of shorter ones for the cross slide.
These are working really well according to him and don’t break the bank.
https://www.amazon.com/Mssoomm-SBR12-98-43-SBR12UU-Bearing-Machine/dp/B08BJZVWKS/ref=mp_s_a_1_3?crid=1PNRYYN9FZJ2G&keywords=linear+rails+and+bearings+2500mm&qid=1704218793&sprefix=linear+rails+and+bearings%2Caps%2C369&sr=8-3
-
And,poof! The slab flattening jig is now a fire wood rack. Finished and prepped for POR15.
(https://uploads.tapatalk-cdn.com/20240114/580be0a290f6b9b6745c0867d773a9b2.jpg)
Sent from my iPad using Tapatalk
-
Nice job Charles :likebutton:
-
Why por15?
-
Great question JR. I don’t remember why I used it on the first one, but its held up really well for 5 years so I’m using it again. Plus some of this metal was sitting on the metal rack for a few years and had some rust and I didn’t feel like using 100 flap discs and spending a week sanding all this down completely.
Sent from my iPad using Tapatalk
-
And,poof! The slab flattening jig is now a fire wood rack. Finished and prepped for POR15.
(https://uploads.tapatalk-cdn.com/20240114/580be0a290f6b9b6745c0867d773a9b2.jpg)
Sent from my iPad using Tapatalk
Interesting transition!
-
Its pricy for bare metal vs just primer IMHO. I think it needs rust to really do its thing too.
Son is doing the frame on his sonoma now, just a solid layer of rust and using the rustolium spray converter.
-
Its pricy for bare metal vs just primer IMHO. I think it needs rust to really do its thing too.
Son is doing the frame on his sonoma now, just a solid layer of rust and using the rustolium spray converter.
Still need to degrease that thoroughly, and I found it works well if you agitate the rust by scraping off the scaly stuff and then wire-brushing the hazy stuff.
Sorry for hijacking...
-
It’s your world boss. Just living here…
Sent from my iPad using Tapatalk
-
It’s your world boss. Just living here…
Sent from my iPad using Tapatalk
Well, I was really just providing it for all of you. You possibly may have just answered a question I have been asking...
-
Bringing closure to the project
(https://uploads.tapatalk-cdn.com/20240130/7cb8e10addff6240498ee5da5368957d.jpg)
(https://uploads.tapatalk-cdn.com/20240130/a84cb189493b3bd5f54859c64c6f89cc.jpg)
Sent from my iPad using Tapatalk
-
Cute, but on the small side for a Tx item
-
Cute, but on the small side for a Tx item
I disagree JR.
reason being, that’s a huge amount of steel and roof for one course of firewood…
-
Just seems small to me. Double wood stacks would be perfect (JMHO)
Is there a need to cover the outside there TRN?
-
No need for outside cover as hot and (usually) dry it is. I cut wood 24 inches in length. Those racks are 10 ft long and about 5 ft or so of usable height for stacking. I burn about one rack a year so this years wood will be ready next year and then I can put up more wood for the following year.
Sent from my iPad using Tapatalk
-
I see the sense behind it then. I was thinking 16in logs and rain getting to it. Good overhangs.
-
To give it some perspective those roof panels are 42 inches, edit 48 inches.
Sent from my iPad using Tapatalk
-
Nice job :likebutton:
-
Well done!
That even looks smart!
Love how the paved path passes through the structure(s).
-
Finished the farm table finally. White oak timbers harvested off the property with black epoxy filling the cracks. 4x4 1/4 wall square tubing base. 700lbs
(https://uploads.tapatalk-cdn.com/20240519/aa8af2316f9336692db39d54a0fe5ceb.jpg)
Sent from my iPad using Tapatalk
-
You move that around with a tractor? Looks great!
-
That looks really great! So you did the epoxy work yourself?
Reason for asking: I plan to build Kat a new kitchen table about the same way...Epoxy, steel base, and fairly similar size and shape.
I would have been building it already, but I was told I should be building a vanity for a granddaughter...
-
Very nice. Get some machine casters!! (kidding)
-
That looks really great! So you did the epoxy work yourself?
Reason for asking: I plan to build Kat a new kitchen table about the same way...Epoxy, steel base, and fairly similar size and shape.
I would have been building it already, but I was told I should be building a vanity for a granddaughter...
Yes. Two part deep pour epoxy with mica powder mixed in to make it black. Pour into the cracks after taping the ends and bottom of the cracks. You will find that those cracks can run in some wierd directions and that expoxy will find the way out if you don’t tape it up. Hit the top with a little flame or heat gun to get rid of the bubbles
Sent from my iPad using Tapatalk
-
Does look nice