Hello Guest

Author Topic: 74 d200/w250. I'm not sure what to name it, but I'm sorry I started it.  (Read 432 times)

0 Members and 1 Guest are viewing this topic.

Offline Dfarm01

  • Registered
  • **
  • Posts: 40
    • View Profile
Some of you fine folks have seen my other thread about this.http://real-man-truckworks-and-survival.com/index.php?topic=2610.0

I figured I'd start one in here, because I'm getting work done,  plus I'm hoping that posting here helps me stay motivated.

My goal is to have this thing driving by June. I'm sick of it being in my garage, and having to rent a trailer when I need something moved.

I've reached a point where I don't know what to do so I'm putting it back together. This will probably bite me at some point, but I need to be making some kind of progress.

I'm sorry my first post in the build thread is a question, and I don't have many pics.  I'll try to get better about taking pics as I work.

I'm getting ready to set the body back down on the frame, but I'm using new body mounts from prothane.  The directions that came with the kit are either wrong or terrible, so I'm not really sure what goes where.

I'm hoping someone here is familiar with these and can point out where each one goes.

I'm thinking the tapered ones are for the cab and the thin ones go under the frame on those.  I have no idea where the other 4 go.  Any help is appreciated.

Offline Flyin6

  • Administrator
  • *****
  • Posts: 19198
    • View Profile
I think the four tapered ones are for the cab.
That's where I placed my tapered ones

Suggestion: Get some of that poly grease made for these bushings and coat the snot out of them. Before you snug everything down. it allows some wiggle room to move the cab around before permanizing it. Secondly, poly squeaks. This grease prevents that from happening a couple years down the road.
Site owner    IS 6:8  Psalm 91 
NSDQ      Author: Distant Thunder

Offline Dfarm01

  • Registered
  • **
  • Posts: 40
    • View Profile
Thanks. Did you just put grease on the sleeves, or between the bushings and washers/cab/frame?

Offline Flyin6

  • Administrator
  • *****
  • Posts: 19198
    • View Profile
Thanks. Did you just put grease on the sleeves, or between the bushings and washers/cab/frame?
Bushing, both sides of the big flat washers, and I put red grease on the bolt threads and on the underside of the bolt head
Site owner    IS 6:8  Psalm 91 
NSDQ      Author: Distant Thunder

Offline OldKooT

  • Registered
  • **
  • Posts: 1321
    • View Profile
I have never used Poly Bushings on any of my builds. But the OEM rubber bushings under the cab are two pieces. The tapered side is under the mount, the flatter is between the cab/body. If it wasn't a blizzard here I could snap some pics. But we should figure this out... my present project is going to need a set soon.

As for motivation... I will race yah, mines just a bare frame ATM lol And it needs to be running by June also.

Whats worse my wife has two of her projects taking up space in my shop...and she just bought a third one.
Norm

Are you a prepper?  "No, whats a prepper? I am just a mildly OCD farmer"

Offline Flyin6

  • Administrator
  • *****
  • Posts: 19198
    • View Profile
I have never used Poly Bushings on any of my builds. But the OEM rubber bushings under the cab are two pieces. The tapered side is under the mount, the flatter is between the cab/body. If it wasn't a blizzard here I could snap some pics. But we should figure this out... my present project is going to need a set soon.

As for motivation... I will race yah, mines just a bare frame ATM lol And it needs to be running by June also.

Whats worse my wife has two of her projects taking up space in my shop...and she just bought a third one.
Hell, for all I know, I have the wrong bushings in mine, or don't have enough, or they are upside down!
Site owner    IS 6:8  Psalm 91 
NSDQ      Author: Distant Thunder

Offline wyorunner

  • Registered
  • **
  • Posts: 545
    • View Profile
So for many of the dodges it seems there is a limited offering for ?off the shelf? poly bushings.  I bought a set for our 74, that could also have been used on the 92 parts truck.

I could look at the factory stuff on the 74 parts truck when I get back to the house and take some pictures.

I was just gonna make it work, cause I didn?t know what went where either and the sheet of paper in the box didn?t help much.


Sent from my iPhone using Tapatalk

Offline Dfarm01

  • Registered
  • **
  • Posts: 40
    • View Profile
Any pics would help.  The factory ones looked like over grilled hamburger patties. Lol

Offline OldKooT

  • Registered
  • **
  • Posts: 1321
    • View Profile
Here ya go.... OEM Dodge

Norm

Are you a prepper?  "No, whats a prepper? I am just a mildly OCD farmer"

Offline Dfarm01

  • Registered
  • **
  • Posts: 40
    • View Profile
Thanks for the pic, but I don't think that'll help much.  The poly ones look much different.  Maybe they were mis packaged.

I'm going to re read the directions and see if I can make sense of them again.

ETA: after looking at the pieces again, I think I have the right parts, and the directions are definitely wrong.  The thick and thinner cylindrical pieces I believe go on the frame/under the cab.(thin in front, thick in rear) the tapered ones go under the frame. I have no idea where the little ones go, and the metal sleeves don't fit over the bolts.

I'm going to call prothane tomorrow. Lol
« Last Edit: March 08, 2018, 07:58:28 PM by Dfarm01 »

Offline Dfarm01

  • Registered
  • **
  • Posts: 40
    • View Profile
I called prothane today, and their office is only open Monday through Thursday :angry:

I'm not sure what to do at this point.  I don't want to waste a weekend.

Maybe I'll start wiring the steering column?

Offline Dfarm01

  • Registered
  • **
  • Posts: 40
    • View Profile
I just got done talking to prothane on the phone. All they have for directions is a generic set, no detailed instructions are available.

I guess I'll have to wing it.  What's the worst that could happen?lol

Offline stlaser

  • Moderator
  • ***
  • Posts: 4428
    • View Profile
I just got done talking to prothane on the phone. All they have for directions is a generic set, no detailed instructions are available.

I guess I'll have to wing it.  What's the worst that could happen?lol

Tac topper & SQ D both come to mind...... :tongue:

& yeah guaranteed if I?m not currently fired I will be shortly
Learn the rules like a pro so that you can break them like an artist -Pablo Picasso-

Offline Dfarm01

  • Registered
  • **
  • Posts: 40
    • View Profile
I just went ahead and bolted the cab back on the frame.  I stuck the thinner mounts under the front of the cab, thicker ones under the rear.  I put the tapered bushings under the frame brackets and bolted everything down.  Plenty of grease anywhere stuff may rub.

I started looking at wiring the steering column, but my book doesn't have the wiring diagram for the steering column on the later trucks, so I'll probably just wait until I have the battery in and everything else hooked up to figure out the wiring on the column.

I feel like I'm making a little progress. I'm trying to finish something, no matter how small each time I work on it. 

One thing I've overlooked at this point is all of the vacuum switches and junk for the 4x4 that I won't be using, and the vacuum actuator for the front axle.(can I just jam the collar in "locked" and put manual hubs one?)

Offline EL TATE

  • Registered
  • **
  • Posts: 1972
    • View Profile
what are you running for a front axle? dana 44 or dana 60? there's a company called posi-lok that makes a cable actuated system that eliminates the vacuum version, or if it's a mid nineties dana 60, I have a CAD delete that replaces the 3 piece axle system w/ a single solid shaft, blocks off the vacuum motor area and then you could convert to manual hubs.
Husband, Father, Gear guy, Patriot.

Offline Dfarm01

  • Registered
  • **
  • Posts: 40
    • View Profile
It's a 44 in the front.  I'll take a look at the posi lock. 

Thanks!

Offline wyorunner

  • Registered
  • **
  • Posts: 545
    • View Profile
What year is your steering column? I?ve got a  digital service manual for 92 and another for 93.

Offline Dfarm01

  • Registered
  • **
  • Posts: 40
    • View Profile
I believe it's an 86 or 87. I'd appreciate a look at the diagram, just in case it's the same as what I've got.

I'm thinking about seeing if I can just swap the whole harness.

Offline Dfarm01

  • Registered
  • **
  • Posts: 40
    • View Profile
I got my column wiring figured out.  I was going to swap the harnesses, but after I had the old one out I found the turn signal switch was broken.

Since I ended up with both harnesses out, it was easy to figure out what wire needed to go where.  I just soldered the old plug onto the new harness.