This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Messages - Bigdave_185
Pages: 1 ... 46 47 [48] 49 50 ... 155
2351
« on: August 23, 2020, 10:49:07 PM »
Ken I think car shows are one of the more wholesome activities I’m going to try harder to attend them with these kids. Keep them interested in cars n trucks and not girls and drugs.
Plans right?
Sent from my iPhone using Tapatalk
2352
« on: August 23, 2020, 10:45:53 PM »
Today on the Silverado I finally added those airbags I should be able to stop that California lean now  It’s a simple system with china man instructions but I made do.  I also finished the replacement parts for the b&w turnover ball hitch I have had. The previous owner of the hitch had some really hoaky parts that were simply not factory. It’s all factory now Sent from my iPhone using Tapatalk
2353
« on: August 23, 2020, 02:20:41 PM »
I still want but haven’t the cash flow. To many other project takin my $
Sent from my iPhone using Tapatalk
2354
« on: August 23, 2020, 02:19:23 PM »
Looks good Tex, You have some fans you said?
Sent from my iPhone using Tapatalk
2355
« on: August 23, 2020, 12:55:50 PM »
Added some floor joists and sheeted the floor. I took some scrap and boxed off the stair way hole so kids can’t get shoved off.    Now to build the hand rail. Still debating on running studs to the ceiling with a four inch spacing or.... half wall Sent from my iPhone using Tapatalk
2356
« on: August 23, 2020, 10:05:11 AM »
 This was a few weeks ago. They go ask the ol guys sitting behind the tractors every question they can think of. It’s one of those proud dad moments for me Sent from my iPhone using Tapatalk
2357
« on: August 23, 2020, 10:03:52 AM »
My kids love that kinda thing. Small group or large I promise you made little boy happy!! Worth it
Sent from my iPhone using Tapatalk
2358
« on: August 23, 2020, 01:22:42 AM »
The engineer that does every house we build says so. Simple enough for me
Sent from my iPhone using Tapatalk
2359
« on: August 22, 2020, 08:30:08 PM »
Double works numbers wise, unless I start piling Cummins motors up there
Sent from my iPhone using Tapatalk
2360
« on: August 22, 2020, 01:15:39 PM »
Lookin good so far
Sent from my iPhone using Tapatalk
2361
« on: August 22, 2020, 09:35:04 AM »
That’s the plan. I’ll hanger the 2x8’s off the doubled 2x8 header. Sheet it and hand rail also. Maybe leave that side open for air and maybe large things to fit upstairs.
But flooring for sure
Sent from my iPhone using Tapatalk
2362
« on: August 22, 2020, 12:26:59 AM »
Progress made tonight  Sent from my iPhone using Tapatalk
2363
« on: August 21, 2020, 03:14:44 PM »
Nate, you should pickle some green beans! Those and asparagus pickled are the best! Also, I would like a jar of your hot salsa! We have home made habanero paste in the fridge we like to use in food.
We do that, I love putting some jalapeños in there also, spicy pickled green beans so great! Sent from my iPhone using Tapatalk
2364
« on: August 21, 2020, 09:42:30 AM »
Hum, the ford n9 single side arms lift an oddly satisfying amount. I was curious
Sent from my iPhone using Tapatalk
2365
« on: August 20, 2020, 06:01:08 PM »
So much bed jumping in the future? Time for long travel suspension?
Sent from my iPhone using Tapatalk
2367
« on: August 20, 2020, 09:14:46 AM »
How much lift capacity does the bucket have. Looks like a good afternoon of smiles to me
Sent from my iPhone using Tapatalk
2368
« on: August 19, 2020, 05:58:48 PM »
A neighbor / friend has a 300 pound pig. Discussion started about me cooking the whole pig in the ground and it being fun to try.
This is honestly never something I have read about past “ hum.... that looks good”.
Open to suggestion and options
Sent from my iPhone using Tapatalk
2369
« on: August 18, 2020, 09:16:42 AM »
With Covid prices an supply are going crazy, that truck here is about that price all day long
Would I buy it not high priced no. Is it a really good motor trans combo. Heck yeah. I like the idea of that instead of a diesel. Just haven’t pulled with one to verify
Sent from my iPhone using Tapatalk
2370
« on: August 17, 2020, 01:06:51 AM »
Built in stair for sure. Just off the landing existing. Maybe five stairs is all, need some other framing experienced mind to cut em, I never get it right and I also want to look at some suspended flooring options To.
Soon enough
Sent from my iPhone using Tapatalk
2371
« on: August 16, 2020, 11:32:26 PM »
Now I look at the corner and see the things rolled in like a lawnmower, quad, Rotherham things that belong in a trailer or a shed I don’t have. Next project I guess.
Still need stairs and mommas garage door powered
Sent from my iPhone using Tapatalk
2372
« on: August 16, 2020, 11:31:24 PM »
You guys cutting Ken out?
Sent from my iPhone using Tapatalk
2373
« on: August 16, 2020, 09:53:39 PM »
Put the shelves up, loaded them up and have room to spare!!   Sent from my iPhone using Tapatalk
2374
« on: August 16, 2020, 11:03:42 AM »
It add a layer of controlled take over that I don’t know I have ever heard before.
Sent from my iPhone using Tapatalk
2375
« on: August 16, 2020, 12:01:18 AM »
2377
« on: August 15, 2020, 03:15:52 PM »
That’s good progress for sure!
Sent from my iPhone using Tapatalk
2378
« on: August 15, 2020, 02:22:52 PM »
 I think maybe three feet is tight for the walk way. Maybe put it down to 2 1/2 feet bench for more walk way Sent from my iPhone using Tapatalk
2379
« on: August 15, 2020, 02:15:02 PM »
I just chalked out lines for my shelves
I have a center isle 8’7. Think I’ll run the wires straight through the floor in a pipe, the middle of a work bench that is 3 feet wide
Sent from my iPhone using Tapatalk
2380
« on: August 15, 2020, 01:14:13 PM »
Morning progress, stopping point until I get rail material and one of my framer buddies to help me see how short I can make my steps.  The garage brackets removed easy enough. Just need to do the other things mentioned Going to lay out my shelf spaces and see what’s left. Sent from my iPhone using Tapatalk
2381
« on: August 15, 2020, 11:36:49 AM »
 I have power here at the grey box mid wall. I could see if there is power above it in the attic. But I assume they ran that horizontally and to go up I’d be going through floor joists that won’t be fun Sent from my iPhone using Tapatalk
2382
« on: August 15, 2020, 11:34:21 AM »
I feel like you’re missing parts? Where is your upper?
Sent from my iPhone using Tapatalk
2383
« on: August 15, 2020, 11:33:25 AM »
I have the same wheel as you in the shed, I like the mixed machine and black look.
I’ll not be excited about a forced 20 on a new truck.m when it happens
Wider wheel might help ya not look so top heavy also
Sent from my iPhone using Tapatalk
2384
« on: August 15, 2020, 09:56:06 AM »
Sure is one of GMs better color choices. Looks really good Don
Sent from my iPhone using Tapatalk
2385
« on: August 15, 2020, 09:48:48 AM »
Need to figure out something, I don’t want wires hanging but powering the garage will look ugly unless I crawl into the attic and insulation
That insulation is 2-3 feet thick blown in. Not a good time of year to be up there,
Sent from my iPhone using Tapatalk
2386
« on: August 15, 2020, 01:24:03 AM »
 I did get two rows of sheeting on, I cut down the garage door parts. Next I need to wire it back up in a non pain in the butt manner. Then sheet the rest Sent from my iPhone using Tapatalk
2387
« on: August 15, 2020, 01:22:47 AM »
2388
« on: August 12, 2020, 11:39:31 PM »
Any reason you don’t use the siding you did the facia and soffit with?
Sent from my iPhone using Tapatalk
2389
« on: August 12, 2020, 10:48:15 PM »
What does it have for drain holes in the floor, The can Am has nothing. The rzr have a cap so to speak.
What does your rig have?
Also where did they dump your battery?
Sent from my iPhone using Tapatalk
2390
« on: August 12, 2020, 10:46:58 PM »
That’s one thing we don’t have yet is shortages. Our supplier stopped selling to box stores. Now they are out and unless you have an account you pay out the buttocks for it
Sent from my iPhone using Tapatalk
2391
« on: August 12, 2020, 08:43:38 PM »
My mezzanine est was $500 last month, paid $650 this morning
Sent from my iPhone using Tapatalk
2392
« on: August 12, 2020, 01:41:13 PM »
 Sent from my iPhone using Tapatalk
2393
« on: August 12, 2020, 12:46:10 PM »
Looks like you got it ready to sell to jr now
Sent from my iPhone using Tapatalk
2394
« on: August 11, 2020, 11:21:37 PM »
Mills have been closed down, Covid, manufactured lumber taking the largest hike, Miller lumber following
2x4x16 was $13 now 18ish
Sent from my iPhone using Tapatalk
2395
« on: August 11, 2020, 11:02:59 PM »
Further more update!! Look for 75% increase on lumber by September
Shortages on lumber to follow!!!
Sent from my iPhone using Tapatalk
2396
« on: August 11, 2020, 11:01:37 PM »
Need to talk with the wife and see where my money is
Sent from my iPhone using Tapatalk
2397
« on: August 11, 2020, 12:01:26 PM »
Boy are they proud of that little keyed system $300 bucks for some plates.
I think I’ll be ordering the bags without the bumps in them. See no major reason for them
Sent from my iPhone using Tapatalk
2399
« on: August 10, 2020, 08:52:18 PM »
Just hangin' around
I’ve had some good naps in a room that looks like this. Nice a quiet for sure Sent from my iPhone using Tapatalk
2400
« on: August 10, 2020, 11:11:33 AM »
Air bag question, Do I need to order anything different with my truck being lifted already?
Sent from my iPhone using Tapatalk
Pages: 1 ... 46 47 [48] 49 50 ... 155
|
Show Posts
